diff options
Diffstat (limited to 'ecos/packages/devs/serial/arm/aim711/current/cdl/ser_arm_aim711.cdl')
| -rwxr-xr-x | ecos/packages/devs/serial/arm/aim711/current/cdl/ser_arm_aim711.cdl | 297 |
1 files changed, 297 insertions, 0 deletions
diff --git a/ecos/packages/devs/serial/arm/aim711/current/cdl/ser_arm_aim711.cdl b/ecos/packages/devs/serial/arm/aim711/current/cdl/ser_arm_aim711.cdl new file mode 100755 index 0000000..75b5968 --- /dev/null +++ b/ecos/packages/devs/serial/arm/aim711/current/cdl/ser_arm_aim711.cdl @@ -0,0 +1,297 @@ +# ==================================================================== +# +# ser_arm_aim711.cdl +# +# eCos serial ARM Industrial Module AIM 711 configuration data +# +# ==================================================================== +## ####ECOSGPLCOPYRIGHTBEGIN#### +## ------------------------------------------- +## This file is part of eCos, the Embedded Configurable Operating System. +## Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. +## +## eCos is free software; you can redistribute it and/or modify it under +## the terms of the GNU General Public License as published by the Free +## Software Foundation; either version 2 or (at your option) any later +## version. +## +## eCos is distributed in the hope that it will be useful, but WITHOUT +## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +## for more details. +## +## You should have received a copy of the GNU General Public License +## along with eCos; if not, write to the Free Software Foundation, Inc., +## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +## +## As a special exception, if other files instantiate templates or use +## macros or inline functions from this file, or you compile this file +## and link it with other works to produce a work based on this file, +## this file does not by itself cause the resulting work to be covered by +## the GNU General Public License. However the source code for this file +## must still be made available in accordance with section (3) of the GNU +## General Public License v2. +## +## This exception does not invalidate any other reasons why a work based +## on this file might be covered by the GNU General Public License. +## ------------------------------------------- +## ####ECOSGPLCOPYRIGHTEND#### +# ==================================================================== +######DESCRIPTIONBEGIN#### +# +# Author(s): Lars.Lindqvist@combitechsystems.com, rcassebohm +# Contributors: jlarmour, rcassebohm +# Date: 2004-09-09 +# +#####DESCRIPTIONEND#### +# +# ==================================================================== + + +cdl_package CYGPKG_IO_SERIAL_ARM_AIM711 { + display "ARM Industrial Module AIM 711 serial device drivers" + + parent CYGPKG_IO_SERIAL_DEVICES + active_if CYGPKG_IO_SERIAL + active_if CYGPKG_HAL_ARM_AIM711 + + include_dir cyg/io + description " + This package contains serial device drivers for the + ARM Industrial Module AIM 711." + + define_proc { + puts $::cdl_system_header "/***** serial driver proc output start *****/" + puts $::cdl_system_header "#ifndef CYGDAT_IO_SERIAL_DEVICE_HEADER" + puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_DEVICE_HEADER <pkgconf/io_serial_arm_aim711.h>" + puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_INL <cyg/io/ser_arm_aim711_16x5x.inl>" + puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_CFG <pkgconf/io_serial_arm_aim711.h>" + puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_ARM_S3C4510_INL <cyg/io/ser_arm_aim711_s3c4510.inl>" + puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_ARM_S3C4510_CFG <pkgconf/io_serial_arm_aim711.h>" + puts $::cdl_system_header "#endif" + puts $::cdl_system_header "/***** serial driver proc output end *****/" + puts $::cdl_header "#include <pkgconf/system.h>"; + puts $::cdl_header "#include <pkgconf/io_serial_arm_s3c4510.h>"; + puts $::cdl_header "#include <pkgconf/io_serial_generic_16x5x.h>"; + } + + cdl_component CYGPKG_IO_SERIAL_ARM_AIM711_16X5X { + display "ARM Industrial Module AIM 711 16x5x serial device drivers" + + parent CYGPKG_IO_SERIAL_DEVICES + active_if CYGPKG_IO_SERIAL + active_if CYGPKG_HAL_ARM_AIM711 + default_value 1 + + requires CYGPKG_ERROR + description " + This package contains serial device drivers for the + ARM Industrial Module AIM 711 for the 16550 serial + interface on board." + + # FIXME: This really belongs in the GENERIC_16X5X package + cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED { + display "Generic 16x5x serial driver required" + } + + cdl_component CYGPKG_IO_SERIAL_ARM_AIM711_16X5X_SERIAL0 { + display "AIM 711 16X5X serial port 0 driver (COM1)" + flavor bool + default_value 1 + description " + This option includes the serial device driver for the AIM 711 16X5X + port 0, which is COM1 on the AIM 711." + + implements CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED + implements CYGINT_IO_SERIAL_FLOW_CONTROL_HW + implements CYGINT_IO_SERIAL_LINE_STATUS_HW + + cdl_option CYGDAT_IO_SERIAL_ARM_AIM711_16X5X_SERIAL0_NAME { + display "Device name for the AIM 711 16X5X serial port 0 driver (COM1)" + flavor data + default_value {"\"/dev/ser1\""} + description " + This option sets the name of the serial device for the AIM 711 + 16X5X port 0 (COM1)." + } + + cdl_option CYGNUM_IO_SERIAL_ARM_AIM711_16X5X_SERIAL0_BAUD { + display "Baud rate for the AIM 711 16X5X serial port 0 driver" + flavor data + legal_values { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600 + 4800 7200 9600 14400 19200 38400 57600 115200 230400 + } + default_value 38400 + description " + This option specifies the default baud rate (speed) for the + AIM 711 16X5X port 0." + } + + cdl_option CYGNUM_IO_SERIAL_ARM_AIM711_16X5X_SERIAL0_BUFSIZE { + display "Buffer size for the AIM 711 16X5X serial port 0 driver" + flavor data + legal_values 0 to 8192 + default_value 128 + description " + This option specifies the size of the internal buffers used for + the AIM 711 16X5X port 0." + } + } + } + + cdl_component CYGPKG_IO_SERIAL_ARM_AIM711_S3C4510 { + display "ARM Industrial Module AIM 711 S3C4510 serial device drivers" + + parent CYGPKG_IO_SERIAL_DEVICES + active_if CYGPKG_IO_SERIAL + active_if CYGPKG_HAL_ARM_AIM711 + default_value 1 + + requires CYGPKG_ERROR + description " + This package contains serial device drivers for the + ARM Industrial Module AIM 711 for the internal serial + interface of the S3C4510." + + # FIXME: This really belongs in the SERIAL_ARM_S3C4510 package + cdl_interface CYGINT_IO_SERIAL_ARM_S3C4510_REQUIRED { + display "Generic s3c4510 serial driver required" + } + + cdl_component CYGPKG_IO_SERIAL_ARM_AIM711_S3C4510_SERIAL0 { + display "AIM 711 S3C4510 serial port 0 driver (service adapter)" + flavor bool + default_value 1 + description " + This option includes the serial device driver for the AIM 711 S3C4510 + port 0, which is on the AIM 711 the port on the service adapter." + + implements CYGINT_IO_SERIAL_ARM_S3C4510_REQUIRED + + cdl_option CYGDAT_IO_SERIAL_ARM_AIM711_S3C4510_SERIAL0_NAME { + display "Device name for the AIM 711 S3C4510 serial port 0 driver (service adapter)" + flavor data + default_value {"\"/dev/ser0\""} + description " + This option sets the name of the serial device for the AIM 711 + S3C4510 port 0 (service adapter)." + } + + cdl_option CYGNUM_IO_SERIAL_ARM_AIM711_S3C4510_SERIAL0_BAUD { + display "Baud rate for the AIM 711 S3C4510 serial port 0 driver" + flavor data + legal_values { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600 + 4800 7200 9600 14400 19200 38400 57600 115200 230400 + } + default_value 38400 + description " + This option specifies the default baud rate (speed) for the + AIM 711 S3C4510 port 0." + } + + cdl_option CYGNUM_IO_SERIAL_ARM_AIM711_S3C4510_SERIAL0_BUFSIZE { + display "Buffer size for the AIM 711 S3C4510 serial port 0 driver" + flavor data + legal_values 0 to 8192 + default_value 128 + description " + This option specifies the size of the internal buffers used for + the AIM 711 S3C4510 port 0." + } + } + + cdl_component CYGPKG_IO_SERIAL_ARM_AIM711_S3C4510_SERIAL1 { + display "AIM 711 S3C4510 serial port 1 driver (COM2)" + flavor bool + default_value 1 + description " + This option includes the serial device driver for the AIM 711 + S3C4510 port 1, which is the COM2 on the AIM 711." + + implements CYGINT_IO_SERIAL_ARM_S3C4510_REQUIRED + + cdl_option CYGDAT_IO_SERIAL_ARM_AIM711_S3C4510_SERIAL1_NAME { + display "Device name for the AIM 711 S3C4510 serial port 1 driver (COM2)" + flavor data + default_value {"\"/dev/ser2\""} + description " + This option specifies the name of serial device for the + AIM 711 S3C4510 port 1 (COM2)." + } + + cdl_option CYGNUM_IO_SERIAL_ARM_AIM711_S3C4510_SERIAL1_BAUD { + display "Baud rate for the AIM 711 S3C4510 serial port 1 driver" + flavor data + legal_values { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600 + 4800 7200 9600 14400 19200 38400 57600 115200 230400 + } + default_value 38400 + description " + This option specifies the default baud rate (speed) for the + AIM 711 S3C4510 port 1." + } + + cdl_option CYGNUM_IO_SERIAL_ARM_AIM711_S3C4510_SERIAL1_BUFSIZE { + display "Buffer size for the AIM 711 S3C4510 serial port 1 driver" + flavor data + legal_values 0 to 8192 + default_value 128 + description " + This option specifies the size of the internal buffers used + for the AIM 711 S3C4510 port 1." + } + } + } + + cdl_component CYGPKG_IO_SERIAL_ARM_AIM711_OPTIONS { + display "Serial device driver build options" + flavor none + description " + Package specific build options including control over + compiler flags used only in building this package, + and details of which tests are built." + + + cdl_option CYGPKG_IO_SERIAL_ARM_AIM711_CFLAGS_ADD { + display "Additional compiler flags" + flavor data + no_define + default_value { "" } + description " + This option modifies the set of compiler flags for + building these serial device drivers. These flags are used in addition + to the set of global flags." + } + + cdl_option CYGPKG_IO_SERIAL_ARM_AIM711_CFLAGS_REMOVE { + display "Suppressed compiler flags" + flavor data + no_define + default_value { "" } + description " + This option modifies the set of compiler flags for + building these serial device drivers. These flags are removed from + the set of global flags if present." + } + } + + cdl_component CYGPKG_IO_SERIAL_ARM_AIM711_TESTING { + display "Testing parameters" + flavor bool + calculated 1 + active_if CYGPKG_IO_SERIAL_ARM_AIM711_16X5X_SERIAL0 + + cdl_option CYGPRI_SER_TEST_SER_DEV { + display "Serial device used for testing" + flavor data + default_value { CYGDAT_IO_SERIAL_ARM_AIM711_16X5X_SERIAL0_NAME } + } + + define_proc { + puts $::cdl_header "#define CYGPRI_SER_TEST_CRASH_ID \"arm16x5x\"" + puts $::cdl_header "#define CYGPRI_SER_TEST_TTY_DEV \"/dev/tty2\"" + } + } +} + +# EOF ser_arm_aim711.cdl |