summaryrefslogtreecommitdiff
path: root/drivers/rtc/rv3029.c
blob: 38acb9c9924d13015ab25ca23ea646cbcbc326ee (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
// SPDX-License-Identifier: GPL-2.0+
/*
 * (C) Copyright 2018 Theobroma Systems Design und Consulting GmbH
 *
 * Based on a the Linux rtc-rv3029c2.c driver written by:
 *   Gregory Hermant <gregory.hermant@calao-systems.com>
 *   Michael Buesch <m@bues.ch>
 */

#include <common.h>
#include <command.h>
#include <dm.h>
#include <i2c.h>
#include <rtc.h>

#define RTC_RV3029_PAGE_LEN             7

/* control section */
#define RV3029_ONOFF_CTRL		0x00
#define RV3029_ONOFF_CTRL_WE		BIT(0)
#define RV3029_ONOFF_CTRL_TE		BIT(1)
#define RV3029_ONOFF_CTRL_TAR		BIT(2)
#define RV3029_ONOFF_CTRL_EERE		BIT(3)
#define RV3029_ONOFF_CTRL_SRON		BIT(4)
#define RV3029_ONOFF_CTRL_TD0		BIT(5)
#define RV3029_ONOFF_CTRL_TD1		BIT(6)
#define RV3029_ONOFF_CTRL_CLKINT	BIT(7)
#define RV3029_IRQ_CTRL			0x01
#define RV3029_IRQ_CTRL_AIE		BIT(0)
#define RV3029_IRQ_CTRL_TIE		BIT(1)
#define RV3029_IRQ_CTRL_V1IE		BIT(2)
#define RV3029_IRQ_CTRL_V2IE		BIT(3)
#define RV3029_IRQ_CTRL_SRIE		BIT(4)
#define RV3029_IRQ_FLAGS		0x02
#define RV3029_IRQ_FLAGS_AF		BIT(0)
#define RV3029_IRQ_FLAGS_TF		BIT(1)
#define RV3029_IRQ_FLAGS_V1IF		BIT(2)
#define RV3029_IRQ_FLAGS_V2IF		BIT(3)
#define RV3029_IRQ_FLAGS_SRF		BIT(4)
#define RV3029_STATUS			0x03
#define RV3029_STATUS_VLOW1		BIT(2)
#define RV3029_STATUS_VLOW2		BIT(3)
#define RV3029_STATUS_SR		BIT(4)
#define RV3029_STATUS_PON		BIT(5)
#define RV3029_STATUS_EEBUSY		BIT(7)
#define RV3029_RST_CTRL			0x04
#define RV3029_RST_CTRL_SYSR		BIT(4)
#define RV3029_CONTROL_SECTION_LEN	0x05

/* watch section */
#define RV3029_W_SEC			0x08
#define RV3029_W_MINUTES		0x09
#define RV3029_W_HOURS			0x0A
#define RV3029_REG_HR_12_24		BIT(6) /* 24h/12h mode */
#define RV3029_REG_HR_PM		BIT(5) /* PM/AM bit in 12h mode */
#define RV3029_W_DATE			0x0B
#define RV3029_W_DAYS			0x0C
#define RV3029_W_MONTHS			0x0D
#define RV3029_W_YEARS			0x0E

/* eeprom control section */
#define RV3029_CONTROL_E2P_EECTRL	0x30
#define RV3029_TRICKLE_1K		BIT(4) /* 1.5K resistance */
#define RV3029_TRICKLE_5K		BIT(5) /* 5K   resistance */
#define RV3029_TRICKLE_20K		BIT(6) /* 20K  resistance */
#define RV3029_TRICKLE_80K		BIT(7) /* 80K  resistance */
#define RV3029_TRICKLE_MASK		(RV3029_TRICKLE_1K |\
					 RV3029_TRICKLE_5K |\
					 RV3029_TRICKLE_20K |\
					 RV3029_TRICKLE_80K)
#define RV3029_TRICKLE_SHIFT		4


static int rv3029_rtc_get(struct udevice *dev, struct rtc_time *tm)
{
	u8 regs[RTC_RV3029_PAGE_LEN];
	int ret;

	ret = dm_i2c_read(dev, RV3029_W_SEC, regs, sizeof(regs));
	if (ret < 0) {
		printf("%s: error reading RTC: %x\n", __func__, ret);
		return -EIO;
	}

	tm->tm_sec = bcd2bin(regs[RV3029_W_SEC - RV3029_W_SEC]);
	tm->tm_min = bcd2bin(regs[RV3029_W_MINUTES - RV3029_W_SEC]);

	/* HR field has a more complex interpretation */
	{
		const u8 _hr = regs[RV3029_W_HOURS - RV3029_W_SEC];

		if (_hr & RV3029_REG_HR_12_24) {
			/* 12h format */
			tm->tm_hour = bcd2bin(_hr & 0x1f);
			if (_hr & RV3029_REG_HR_PM)	/* PM flag set */
				tm->tm_hour += 12;
		} else {
			/* 24h format */
			tm->tm_hour = bcd2bin(_hr & 0x3f);
		}
	}

	tm->tm_mday = bcd2bin(regs[RV3029_W_DATE - RV3029_W_SEC]);
	tm->tm_mon = bcd2bin(regs[RV3029_W_MONTHS - RV3029_W_SEC]) - 1;
	/* RTC supports only years > 1999 */
	tm->tm_year = bcd2bin(regs[RV3029_W_YEARS - RV3029_W_SEC]) + 2000;
	tm->tm_wday = bcd2bin(regs[RV3029_W_DAYS - RV3029_W_SEC]) - 1;

	tm->tm_yday = 0;
	tm->tm_isdst = 0;

	debug("%s: %4d-%02d-%02d (wday=%d) %2d:%02d:%02d\n",
	      __func__, tm->tm_year, tm->tm_mon, tm->tm_mday,
	      tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec);

	return 0;
}

static int rv3029_rtc_set(struct udevice *dev, const struct rtc_time *tm)
{
	u8 regs[RTC_RV3029_PAGE_LEN];

	debug("%s: %4d-%02d-%02d (wday=%d( %2d:%02d:%02d\n",
	      __func__, tm->tm_year, tm->tm_mon, tm->tm_mday,
	      tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec);


	if (tm->tm_year < 2000) {
		printf("%s: year %d (before 2000) not supported\n",
		       __func__, tm->tm_year);
		return -EINVAL;
	}

	regs[RV3029_W_SEC - RV3029_W_SEC] = bin2bcd(tm->tm_sec);
	regs[RV3029_W_MINUTES - RV3029_W_SEC] = bin2bcd(tm->tm_min);
	regs[RV3029_W_HOURS - RV3029_W_SEC] = bin2bcd(tm->tm_hour);
	regs[RV3029_W_DATE - RV3029_W_SEC] = bin2bcd(tm->tm_mday);
	regs[RV3029_W_MONTHS - RV3029_W_SEC] = bin2bcd(tm->tm_mon + 1);
	regs[RV3029_W_DAYS - RV3029_W_SEC] = bin2bcd(tm->tm_wday + 1) & 0x7;
	regs[RV3029_W_YEARS - RV3029_W_SEC] = bin2bcd(tm->tm_year - 2000);

	return dm_i2c_write(dev, RV3029_W_SEC, regs, sizeof(regs));
}

static int rv3029_rtc_reset(struct udevice *dev)
{
	u8 ctrl = RV3029_RST_CTRL_SYSR;
	unsigned long start;
	const unsigned long timeout_ms = 10000;
	int ret;

	/* trigger the system-reset */
	ret = dm_i2c_write(dev, RV3029_RST_CTRL, &ctrl, 1);
	if (ret < 0)
		return -EIO;

	/* wait for the system-reset to complete */
	start = get_timer(0);
	do {
		if (get_timer(start) > timeout_ms)
			return -ETIMEDOUT;

		ret = dm_i2c_read(dev, RV3029_RST_CTRL, &ctrl, 1);
		if (ret < 0)
			return -EIO;
	} while (ctrl & RV3029_RST_CTRL_SYSR);

	return 0;
}

static int rv3029_rtc_read8(struct udevice *dev, unsigned int reg)
{
	u8 data;
	int ret;

	ret = dm_i2c_read(dev, reg, &data, sizeof(data));
	return ret < 0 ? ret : data;
}

static int rv3029_rtc_write8(struct udevice *dev, unsigned int reg, int val)
{
	u8 data = val;

	return dm_i2c_write(dev, reg, &data, 1);
}

#if defined(OF_CONTROL)
static int rv3029_get_sr(struct udevice *dev, u8 *buf)
{
	int ret = dm_i2c_read(dev, RV3029_STATUS, buf, 1);

	if (ret < 0)
		return -EIO;

	dev_dbg(dev, "status = 0x%.2x (%d)\n", buf[0], buf[0]);
	return 0;
}

static int rv3029_set_sr(struct udevice *dev, u8 val)
{
	int ret;

	ret = dm_i2c_read(dev, RV3029_STATUS, &val, 1);
	if (ret < 0)
		return -EIO;

	dev_dbg(dev, "status = 0x%.2x (%d)\n", val, val);
	return 0;
}

static int rv3029_eeprom_busywait(struct udevice *dev)
{
	int i, ret;
	u8 sr;

	for (i = 100; i > 0; i--) {
		ret = rv3029_get_sr(dev, &sr);
		if (ret < 0)
			break;
		if (!(sr & RV3029_STATUS_EEBUSY))
			break;
		udelay(10000);
	}
	if (i <= 0) {
		dev_err(dev, "EEPROM busy wait timeout.\n");
		return -ETIMEDOUT;
	}

	return ret;
}

static int rv3029_update_bits(struct udevice *dev, u8 reg, u8 mask, u8 set)
{
	u8 buf;
	int ret;

	ret = dm_i2c_read(dev, reg, &buf, 1);
	if (ret < 0)
		return ret;

	if ((buf & mask) == (set && mask))
		return 0;

	buf = (buf & ~mask) | (set & mask);
	ret = dm_i2c_read(dev, reg, &buf, 1);
	if (ret < 0)
		return ret;

	return 0;
}

static int rv3029_eeprom_exit(struct udevice *dev)
{
	/* Re-enable eeprom refresh */
	return rv3029_update_bits(dev, RV3029_ONOFF_CTRL,
				  RV3029_ONOFF_CTRL_EERE,
				  RV3029_ONOFF_CTRL_EERE);
}

static int rv3029_eeprom_enter(struct udevice *dev)
{
	int ret;
	u8 sr;

	/* Check whether we are in the allowed voltage range. */
	ret = rv3029_get_sr(dev, &sr);
	if (ret < 0)
		return ret;
	if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
		/* We clear the bits and retry once just in case
		 * we had a brown out in early startup.
		 */
		sr &= ~RV3029_STATUS_VLOW1;
		sr &= ~RV3029_STATUS_VLOW2;
		ret = rv3029_set_sr(dev, sr);
		if (ret < 0)
			return ret;
		udelay(10000);
		ret = rv3029_get_sr(dev, &sr);
		if (ret < 0)
			return ret;
		if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
			dev_err(dev, "Supply voltage is too low to safely access the EEPROM.\n");
			return -ENODEV;
		}
	}

	/* Disable eeprom refresh. */
	ret = rv3029_update_bits(dev,
				 RV3029_ONOFF_CTRL, RV3029_ONOFF_CTRL_EERE, 0);
	if (ret < 0)
		return ret;

	/* Wait for any previous eeprom accesses to finish. */
	ret = rv3029_eeprom_busywait(dev);
	if (ret < 0)
		rv3029_eeprom_exit(dev);

	return ret;
}

static int rv3029_eeprom_read(struct udevice *dev, u8 reg,
			      u8 buf[], size_t len)
{
	int ret, err;

	err = rv3029_eeprom_enter(dev);
	if (err < 0)
		return err;

	ret = dm_i2c_read(dev, reg, buf, len);

	err = rv3029_eeprom_exit(dev);
	if (err < 0)
		return err;

	return ret;
}

static int rv3029_eeprom_write(struct udevice *dev, u8 reg,
			       u8 const buf[], size_t len)
{
	int ret;
	size_t i;
	u8 tmp;

	ret = rv3029_eeprom_enter(dev);
	if (ret < 0)
		return ret;

	for (i = 0; i < len; i++, reg++) {
		ret = dm_i2c_read(dev, reg, &tmp, 1);
		if (ret < 0)
			break;
		if (tmp != buf[i]) {
			ret = dm_i2c_write(dev, reg, &buf[i], 1);
			if (ret < 0)
				break;
		}
		ret = rv3029_eeprom_busywait(dev);
		if (ret < 0)
			break;
	}

	ret = rv3029_eeprom_exit(dev);
	if (ret < 0)
		return ret;

	return 0;
}

static int rv3029_eeprom_update_bits(struct udevice *dev,
				     u8 reg, u8 mask, u8 set)
{
	u8 buf;
	int ret;

	ret = rv3029_eeprom_read(dev, reg, &buf, 1);
	if (ret < 0)
		return ret;

	/*
	 * If the EEPROM already reads the correct bitpattern, we don't need
	 * to update it.
	 */
	if ((buf & mask) == (set & mask))
		return 0;

	buf = (buf & ~mask) | (set & mask);
	ret = rv3029_eeprom_write(dev, reg, &buf, 1);
	if (ret < 0)
		return ret;

	return 0;
}

static void rv3029_trickle_config(struct udevice *dev)
{
	static const struct rv3029_trickle_tab_elem {
		u32 r;		/* resistance in ohms */
		u8 conf;	/* trickle config bits */
	} rv3029_trickle_tab[] = {
		{
			.r	= 1076,
			.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
				  RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
		}, {
			.r	= 1091,
			.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
				  RV3029_TRICKLE_20K,
		}, {
			.r	= 1137,
			.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
				  RV3029_TRICKLE_80K,
		}, {
			.r	= 1154,
			.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_5K,
		}, {
			.r	= 1371,
			.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_20K |
				  RV3029_TRICKLE_80K,
		}, {
			.r	= 1395,
			.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_20K,
		}, {
			.r	= 1472,
			.conf	= RV3029_TRICKLE_1K | RV3029_TRICKLE_80K,
		}, {
			.r	= 1500,
			.conf	= RV3029_TRICKLE_1K,
		}, {
			.r	= 3810,
			.conf	= RV3029_TRICKLE_5K | RV3029_TRICKLE_20K |
				  RV3029_TRICKLE_80K,
		}, {
			.r	= 4000,
			.conf	= RV3029_TRICKLE_5K | RV3029_TRICKLE_20K,
		}, {
			.r	= 4706,
			.conf	= RV3029_TRICKLE_5K | RV3029_TRICKLE_80K,
		}, {
			.r	= 5000,
			.conf	= RV3029_TRICKLE_5K,
		}, {
			.r	= 16000,
			.conf	= RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
		}, {
			.r	= 20000,
			.conf	= RV3029_TRICKLE_20K,
		}, {
			.r	= 80000,
			.conf	= RV3029_TRICKLE_80K,
		},
	};
	int err;
	u32 ohms;
	u8 trickle_set_bits = 0;

	/* Configure the trickle charger. */
	err = dev_read_u32(dev, "trickle-resistor-ohms", &ohms);

	if (!err) {
		/* Find trickle-charger config */
		for (int i = 0; i < ARRAY_SIZE(rv3029_trickle_tab); i++)
			if (rv3029_trickle_tab[i].r >= ohms) {
				dev_dbg(dev, "trickle charger at %d ohms\n",
					rv3029_trickle_tab[i].r);
				trickle_set_bits = rv3029_trickle_tab[i].conf;
				break;
			}
	}

	dev_dbg(dev, "trickle charger config 0x%x\n", trickle_set_bits);
	err = rv3029_eeprom_update_bits(dev, RV3029_CONTROL_E2P_EECTRL,
					RV3029_TRICKLE_MASK,
					trickle_set_bits);
	if (err < 0)
		dev_dbg(dev, "failed to update trickle charger\n");
}
#else
static inline void rv3029_trickle_config(struct udevice *dev)
{
}
#endif

static int rv3029_probe(struct udevice *dev)
{
	i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS |
				DM_I2C_CHIP_WR_ADDRESS);

	rv3029_trickle_config(dev);
	return 0;
}

static const struct rtc_ops rv3029_rtc_ops = {
	.get = rv3029_rtc_get,
	.set = rv3029_rtc_set,
	.read8 = rv3029_rtc_read8,
	.write8 = rv3029_rtc_write8,
	.reset = rv3029_rtc_reset,
};

static const struct udevice_id rv3029_rtc_ids[] = {
	{ .compatible = "mc,rv3029" },
	{ .compatible = "mc,rv3029c2" },
	{ }
};

U_BOOT_DRIVER(rtc_rv3029) = {
	.name	= "rtc-rv3029",
	.id	= UCLASS_RTC,
	.probe	= rv3029_probe,
	.of_match = rv3029_rtc_ids,
	.ops	= &rv3029_rtc_ops,
};