u-boot-toradex.git - U-Boot bootloader for Apalis and Colibri modules

Age	Commit message (Expand)	Author
2020-03-24	apalis-imx8: sync with MEK platform	Igor Opaniuk
2020-03-16	apalis-imx8: Fix hardware version detection in recovery mode	Marcel Ziswiler
2020-03-13	apalis-imx8: Remove fdt_file env variable	Philippe Schenker
2020-03-13	apalis-imx8: Implement hardware version detection	Philippe Schenker
2020-03-10	config: apalis-imx8: Enable FEC TXC delay	Philippe Schenker
2020-03-05	config: apalis-imx8: fix auto-negotiation timeout error	Oleksandr Suvorov
2020-03-05	config: apalis/colibri-imx8*: Add fdt_high variable without value	Philippe Schenker
2020-03-05	apalis-imx8/x/colibri-imx8qxp: skip resource checking	Marcel Ziswiler
2020-03-05	include: apalis-imx8.h: change default devicetree file	Philippe Schenker
2020-03-05	include: apalis-imx8.h: change tdxargs to defargs for pci_nomsi	Philippe Schenker
2020-03-05	include: apalis-imx8.h: add default tdxargs pci=nomsi	Philippe Schenker
2020-03-05	apalis-imx8/colibri-imx8x: set fdtfile since it is used by distro bootcmd	Stefan Agner
2020-03-05	apalis-imx8/colibri-imx8x: use proper distroboot script	Marcel Ziswiler
2020-03-05	colibri-imx8x/apalis-imx8: converge scriptaddr for distroboot	Stefan Agner
2020-03-05	apalis-imx8/colibri-imx8qxp: integrate fastboot recovery	Marcel Ziswiler
2020-03-05	apalis-imx8: fix ramdisk relocation address	Marcel Ziswiler
2020-03-05	apalis-imx8: enable FDT relocation	Stefan Agner
2020-03-05	apalis-imx8: add scriptaddr for distroboot	Stefan Agner
2020-03-05	apalis-imx8.h: move environment into first boot area	Max Krummenacher
2020-03-05	apalis-imx8: configure automatic booting on recovery	Gerard Salvatella
2020-03-05	apalis-imx8: enable distro boot in tezi	Gerard Salvatella
2020-03-05	apalis-imx8: increase bootm loading size	Gerard Salvatella
2020-03-05	apalis-imx8: do not undef configs configured using Kconfig	Stefan Agner
2020-03-05	apalis-imx8: modify default ramdisk loading address	Gerard Salvatella
2020-03-05	apalis-imx8: clean-up ethernet functionality	Max Krummenacher
2020-03-05	apalis-imx8: fused modules boot from emmc	Max Krummenacher
2020-03-05	apalis-imx8: clean-up board file	Max Krummenacher
2020-03-05	apalis-imx8: clean-up configuration	Max Krummenacher
2020-03-05	apalis-imx8: adjust copyright/licensing headers	Max Krummenacher
2020-03-05	apalis-imx8: forward port to 2018.03	Max Krummenacher
2020-03-05	apalis-imx8: config: remove pcie and sata	Max Krummenacher
2020-03-05	apalis-imx8: boot from SD card for now	Stefan Agner
2020-03-05	tdx-cfg-block: add config block support	Stefan Agner
2020-03-05	apalis-imx8: add default memory layout and network options	Stefan Agner
2020-03-05	apalis-imx8: use eMMC as environment location/default boot device	Stefan Agner
2020-03-05	apalis-imx8: load HDMI firmware	Stefan Agner
2020-03-05	apalis-imx8: set device tree to Apalis DT by default	Stefan Agner
2020-03-05	apalis-imx8: use UART1 as console UART	Stefan Agner
2020-03-05	apalis-imx8: fix Ethernet	Stefan Agner
2020-03-05	apalis-imx8: remove PCA9557 GPIO controllers	Stefan Agner
2020-03-05	apalis-imx8: initial add	Stefan Agner