summaryrefslogtreecommitdiff
path: root/cpu/arm_cortexa8/mx6/generic.c
AgeCommit message (Expand)Author
2013-04-02ENGR00256543 mx6: Update equation for thermal sensor on i.MX6DLAnson Huang
2013-03-27ENGR00255481 mx6: Update equation for thermal sensorAnson Huang
2013-02-04ENGR00243038: make get_mmc_env_devno to be a generic functionJason Liu
2012-12-13ENGR00235821 mx6: correct work flow of PFDsAnson Huang
2012-12-11ENGR00235817 mx6: use SNVS LPGPR register to store boot mode value.Zhang Jiejing
2012-12-10ENGR00236337: mx6/clock: emi_slow clock rate is not printed out correctlyJason Liu
2012-11-28ENGR00223037 fsl: Add new board HDMI dongle for imx6 Q/DL.Zhang Xiaodong
2012-11-19ENGR00233366-5 Anatop PFUZE: move LDO bypass code to kernelRobin Gong
2012-11-12ENGR00233307 Need secure/encrypted boot for Widevine support.Dan Douglass
2012-10-30ENGR00231553: MX6SL: Uncovered an issue for I2C parent clockTerry Lv
2012-10-16ENGR00229614 mx6: disable VDDPU by default, xpu will enable it if needed.Anson Huang
2012-09-06ENGR00223236-1 [MX6]Change the temperature range to -40C ~ 125CAnson Huang
2012-08-31ENGR00221503-2 imx6: add cpu serial number support.Zhang Jiejing
2012-08-01ENGR00218972 MX6 Secure Boot, Change to dynamic HAB data authenticationEric Sun
2012-07-26ENGR00217401 common: fix build warningXinyu Chen
2012-07-13ENGR00217114-1 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SLEric Sun
2012-05-29ENGR00210918-2 cleanup android support, build pass all boardsZhang Jiejing
2012-05-21ENGR00209899-2 MX6Q: cleanup: cleanup fastboot, udc warnning.Zhang Jiejing
2012-05-14ENGR00209059 android: refine fastboot and recovery support.Zhang Jiejing
2012-05-02ENGR00181337-1 i.mx6 : add initial support for i.mx6slEric Sun
2012-04-24ENGR00180623 fastboot: add fastboot in MX6Q_SABERSD boardsZhang Jiejing
2012-04-18ENGR00179762: i.MX6: print the SOC revision correctlyJason Liu
2012-02-17ENGR00174625: Remove build warnings for mx6qTerry Lv
2012-02-13ENGR00174104-1: Add conditional CONFIG to fix build breakTerry Lv
2012-01-12ENGR00171771 [MX6]Need to power down PCIe by defaultAnson Huang
2011-12-30ENGR00171091 [MX6]Remove workaround for reset issueAnson Huang
2011-12-28ENGR00171008 MX6Q/MFGTOOL : disable the workaround for MFGTOOLHuang Shijie
2011-12-22ENGR00170837 [MX6]Add temperatuer check into ubootAnson Huang
2011-12-20ENGR00162642: Fix bug in setting VDDSOC voltageRanjani Vaidyanathan
2011-12-20ENGR00160621 [MX6]Workaround for reset issueAnson Huang
2011-12-15ENGR00170299-1 Android: add support fastboot functionZhang Jiejing
2011-11-30 ENGR00163513 MX6Q-UBOOT : Add download_mode cmdEric Sun
2011-11-23ENGR00162874: Add enet clk change support for mx6Terry Lv
2011-11-17ENGR00162570: MX6-Increase VDDSOC_CAP voltage to 1.2VRanjani Vaidyanathan
2011-11-03ENGR00161373 Move the MAC address read from fuse code to MX6 SoC fileMahesh Mahadevan
2011-11-03ENGR00161254 MX6Q: Add NAND support in UbootAllen Xu
2011-11-02ENGR00139215 iMX61 Uboot support blow fuseRyan QIAN
2011-09-02ENGR00139254: Enable MX6Q Uboot Splash ScreenSandor Yu
2011-08-22ENGR00155156 [MX6]Clean up debug info in ubootAnson Huang
2011-06-24ENGR00144424 MX6: enable uboot for ARM2(SABREAUTO) CPU boardAnson Huang
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-28 21:10:08 +0000