index
:
u-boot-toradex.git
2011.12-colibri_vf
2014.04-toradex
2014.10-toradex
2014.10-toradex-next
2015.04-imx7-1.1.0_ga-toradex-next
2015.04-toradex
2015.04-toradex-next
2016.11-toradex
2016.11-toradex-next
colibri
colibri-next
colibri_vf
toradex_2019.07
toradex_2019.07-next
toradex_2020.07
toradex_imx6
toradex_imx_lf_v2022.04
toradex_imx_lf_v2024.04
toradex_imx_v2017.03_4.9.123_imx8mm_ga-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta1-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta2-bring_up
toradex_imx_v2018.03_4.14.62_1.0.0_beta-bringup
toradex_imx_v2018.03_4.14.78_1.0.0_ga-bringup
toradex_imx_v2018.03_4.14.98_2.3.0_bringup
toradex_imx_v2020.04_5.4.24_2.1.0
toradex_imx_v2020.04_5.4.70_2.3.0
toradex_ti-u-boot-2021.01_bringup
toradex_ti-u-boot-2023.04
toradex_ti-u-boot-2024.04
U-Boot bootloader for Apalis and Colibri modules
Toradex
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
board
/
ti
/
panda
Age
Commit message (
Expand
)
Author
2014-01-24
ARM: OMAP4/5: Remove dead code against CONFIG_SYS_ENABLE_PADS_ALL
Jassi Brar
2013-12-04
pandaboard: 1/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM
Hardik Patel
2013-10-31
board: ti: convert makefiles to Kbuild style
Masahiro Yamada
2013-10-20
usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.
Troy Kisky
2013-10-20
usb: new board-specific USB init interface
Mateusz Zalega
2013-10-14
ARM: omap4-panda: Add MAC address creation for panda
Dan Murphy
2013-07-24
Add GPL-2.0+ SPDX-License-Identifier to source files
Wolfgang Denk
2013-06-18
arm: omap4: panda: Fix checkpatch on panda file
Dan Murphy
2013-06-18
arm: omap4: panda: Add reading of the board revision
Dan Murphy
2013-06-10
ARM: OMAP2+: Rename asm/arch/clocks.h asm/arch/clock.h
Lokesh Vutla
2013-06-10
ARM: OMAP4+: Cleanup header files
Lokesh Vutla
2013-05-10
ARM:Panda:Fix device tree loading for the panda-es
Dan Murphy
2013-03-08
omap_hsmmc: add driver check for write protection
Nikita Kiryanov
2013-03-08
omap_hsmmc: implement driver check for card detection
Nikita Kiryanov
2012-10-15
usb: ehci: rework to take advantage of new lowlevel interface
Lucas Stach
2012-07-20
ARM: OMAP4: PANDA: Add rest of the USB module pads to essentials
SRICHARAN R
2012-05-15
omap4: panda: disable uart2 pads during boot
Tero Kristo
2012-05-15
OMAP4460: TPS Ensure SET1 is selected after voltage configuration
Nishanth Menon
2012-05-15
ARM:OMAP+:MMC: Add parameters to MMC init
Jonathan Solnit
2012-02-12
OMAP4: ehci-omap: enable ehci-omap for panda boards
Govindraj.R
2012-02-12
ehci-omap: Clean up added ehci-omap.c
Govindraj.R
2011-12-19
omap4_panda: Initialize the USB phy
Chris Lalancette
2011-12-06
omap4460: fix TPS initialization
Aneesh V
2011-11-15
omap5: Add minimal support for omap5430.
Sricharan
2011-10-27
omap4: splitting padconfs into common, 4430 and 4460
Ricardo Salveti de Araujo
2011-10-15
punt unused clean/distclean targets
Mike Frysinger
2011-09-13
omap4: fix pad configuration settings for SDP and Panda
Aneesh V
2011-08-03
omap: add basic SPL support
Aneesh V
2011-08-03
omap4: cleanup pin mux data
Aneesh V
2010-11-17
Switch from archive libraries to partial linking
Sebastien Carlier
2010-10-18
Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE
Wolfgang Denk
2010-10-17
ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDP
Steve Sakoman
2010-10-17
ARMV7: OMAP4: Use generic mmc driver on Panda
Sukumar Ghorai
2010-09-28
ARMV7: OMAP4: Fix Panda pinmux setting to enable Wifi/BT Module
Steve Sakoman
2010-09-10
Prepare v2010.09-rc1
v2010.09-rc1
Wolfgang Denk
2010-09-08
ARMV7: Fix pad mux for Panda LEDs
Ricardo Salveti de Araujo
2010-08-05
ARMV7: Add pad mux support for OMAP4
Steve Sakoman
2010-07-15
ARMV7: Add basic gpmc initialization for OMAP4
Steve Sakoman
2010-07-05
ARMV7: Add support for TI OMAP4 Panda
Steve Sakoman