summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx
AgeCommit message (Expand)Author
2022-05-20Merge tag 'rel_imx_5.4.70_2.3.6' into toradex_imx_v2020.04_5.4.70_2.3.0Philippe Schenker
2022-05-10imx8m: fixup thermal tripsAndrejs Cainikovs
2022-01-11LF-5298: imx8dxl: Add support for DXL B0 SOCNitin Garg
2021-11-10apalis-imx8x: Drop support for Apalis iMX8XDenys Drozdov
2021-01-09imx8m/soc.c: drop some printfMax Krummenacher
2021-01-09board: toradex: add verdin imx8m plus supportMarcel Ziswiler
2021-01-08imx8m: make board_phys_sdram_size() two bank awareMarcel Ziswiler
2021-01-08imx: romapi: fix spurious ampersand in address printMarcel Ziswiler
2021-01-08imx8: allow overriding memory layoutMarcel Ziswiler
2021-01-08board: add apalis-imx8xDenys Drozdov
2021-01-08mach-imx: spl_sd: drop config includeIgor Opaniuk
2020-11-29MLK-25046 imx: bee: Fix build warning of flush_dcache_rangeYe Li
2020-11-18MLK-25010 iMX8MN: Update low_drive_gpu_freq for new GPU node pathYe Li
2020-11-16MLK-25003-2 iMX8M: Update thermal and PMU kernel nodes for dual/single coresYe Li
2020-11-16MLK-25003-1 iMX8MN: Add support for 11x11 UltraLite part numberYe Li
2020-11-08MLK-24971-2 imx8mp_evk: Set GIC clock to 500Mhz on LPDDR4 EVK onlyYe Li
2020-11-06MLK-24968 imx8m: soc: update fuse pathPeng Fan
2020-11-06LF-2637 mx6: fuse: update node pathPeng Fan
2020-11-06MLK-24907 imx8mp: configure GIC clk to 500MPeng Fan
2020-10-13MLK-24887 iMX8MM: Add new LPDDR4 EVK supportYe Li
2020-10-12MLK-24877-1: nandbcb: nand support for i.MX8MPHan Xu
2020-10-09MLK-24860-2 imx8mp_evk: Add DDR4 EVK board supportYe Li
2020-09-18MLK-24817 iMX8MN: Add iMX8MN 11x11 DDR3L EVK supportYe Li
2020-09-16MLK-24792 imx8dxl: Rename iMX8DXL DDR3 VAL to EVK boardYe Li
2020-09-15MLK-24766-3 imx7ulp-clk: add lpspi clk enable functionClark Wang
2020-09-08MLK-24750-1 spl: Allow iMX7/8/8M to overwrite spl_board_boot_deviceYe Li
2020-09-07MLK-24720 imx8mq_ddr4_val: Change to use iMX8M DDR driverYe Li
2020-09-05MLK-24616 imx8: misc: Fix hardcoded LPUART0 for LPCGYe Li
2020-08-18MLK-24510: board: freescale: imx8mm ddr4 audio board 2.0Adrian Alonso
2020-08-13MLK-24474: Add command to set SECO FIPS modeFranck LENORMAND
2020-08-11MLK-24482 imx8dxl: Update chip revision to recognize A1Ye Li
2020-08-10Revert "LF-1936 imx8mq: remove dead switch"Peng Fan
2020-08-10Revert "LF-1934 imx8mm: remove dead switch"Peng Fan
2020-08-10Revert "LF-1928 imx7ulp: scg: remove dead switch"Peng Fan
2020-08-10LF-1936 imx8mq: remove dead switchPeng Fan
2020-08-10LF-1934 imx8mm: remove dead switchPeng Fan
2020-08-10LF-1928 imx7ulp: scg: remove dead switchPeng Fan
2020-08-04LF-1861 imx8m: clock: Fix ecspi1 clock settingYe Li
2020-08-04LF-1873 imx8: snvs_security: Fix dead code in apply_tamper_pin_list_configYe Li
2020-08-04LF-1876 imx8: snvs_security: Fix dead code in apply_snvs_dgo_configYe Li
2020-08-04LF-1895 imx8: Fix unsigned compared with negative valueYe Li
2020-08-04LF-1866 imx: nandbcb: Fix potential overflow in nandbcb_set_boot_configYe Li
2020-08-04LF-1868 imx: nandbcb: Fix potential overflow in fill_dbbt_dataYe Li
2020-08-04LF-1867 imx: nandbcb: Fix resource leak in read_fcbYe Li
2020-08-04LF-1865 imx: nandbcb: Fix resource leakYe Li
2020-08-04LF-1864 imx: nandbcb: Fix uninitialized variableYe Li
2020-08-05LF-1856: imx8: solve the problem of "Incorrect deallocator used"Alice Guo
2020-08-01MLK-24451 imx8mp: Remove parts MIMX8ML7 and MIMX8ML5 supportYe Li
2020-07-22MLK-24434 imx8mn: Add low drive mode support for DDR4/LPDDR4 EVKYe Li
2020-07-20MLK-24426-2 iMX8DXL: Print the V2X FW build infoYe Li
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-08 03:08:39 +0000