Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx

3 files changed, 131 insertions, 2 deletions

diff --git a/include/asm-ppc/immap_512x.h b/include/asm-ppc/immap_512x.h
index cd9094519be..808786985e5 100644
--- a/include/asm-ppc/immap_512x.h
+++ b/include/asm-ppc/immap_512x.h
@@ -415,7 +415,25 @@ typedef struct ioctrl512x {
  * IIM
  */
 typedef struct iim512x {
-	u8 fixme[0x1000];
+	u32 stat;		/* IIM status register */
+	u32 statm;		/* IIM status IRQ mask */
+	u32 err;		/* IIM errors register */
+	u32 emask;		/* IIM error IRQ mask  */
+	u32 fctl;		/* IIM fuse control register */
+	u32 ua;			/* IIM upper address register */
+	u32 la;			/* IIM lower address register */
+	u32 sdat;		/* IIM explicit sense data */
+	u8 res0[0x08];
+	u32 prg_p;		/* IIM program protection register */
+	u8 res1[0x10];
+	u32 divide;		/* IIM divide factor register */
+	u8 res2[0x7c0];
+	u32 fbac0;		/* IIM fuse bank 0 prot (for Freescale use) */
+	u32 fb0w0[0x1f];	/* IIM fuse bank 0 data (for Freescale use) */
+	u8 res3[0x380];
+	u32 fbac1;		/* IIM fuse bank 1 protection */
+	u32 fb1w1[0x01f];	/* IIM fuse bank 1 data */
+	u8 res4[0x380];
 } iim512x_t;
 
 /*
@@ -451,7 +469,34 @@ typedef struct lpc512x {
  * PATA
  */
 typedef struct pata512x {
-	u8 fixme[0x100];
+	/* LOCAL Registers */
+	u32 pata_time1;		/* Time register 1: PIO and tx timing parameter */
+	u32 pata_time2;		/* Time register 2: PIO timing parameter */
+	u32 pata_time3;		/* Time register 3: PIO and MDMA timing parameter */
+	u32 pata_time4;		/* Time register 4: MDMA and UDMA timing parameter */
+	u32 pata_time5;		/* Time register 5: UDMA timing parameter */
+	u32 pata_time6;		/* Time register 6: UDMA timing parameter */
+	u32 pata_fifo_data32;   /* 32bit wide dataport to/from FIFO */
+	u32 pata_fifo_data16;   /* 16bit wide dataport to/from FIFO */
+	u32 pata_fifo_fill;	/* FIFO filling in halfwords (READONLY)*/
+	u32 pata_ata_control;   /* ATA Interface control register */
+	u32 pata_irq_pending;   /* Interrupt pending register (READONLY) */
+	u32 pata_irq_enable;	/* Interrupt enable register */
+	u32 pata_irq_clear;	/* Interrupt clear register (WRITEONLY)*/
+	u32 pata_fifo_alarm;	/* fifo alarm threshold */
+	u32 res1[0x1A];
+	/* DRIVE Registers */
+	u32 pata_drive_data;	/* drive data register*/
+	u32 pata_drive_features;/* drive features register */
+	u32 pata_drive_sectcnt; /* drive sector count register */
+	u32 pata_drive_sectnum; /* drive sector number register */
+	u32 pata_drive_cyllow;  /* drive cylinder low register */
+	u32 pata_drive_cylhigh; /* drive cylinder high register */
+	u32 pata_drive_dev_head;/* drive device head register */
+	u32 pata_drive_command; /* write = drive command, read = drive status reg */
+	u32 res2[0x06];
+	u32 pata_drive_alt_stat;/* write = drive control, read = drive alt status reg */
+	u32 res3[0x09];
 } pata512x_t;
 
 /*
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index bb3525f1751..8fda3f29fab 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -47,6 +47,7 @@
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC512X		1	/* MPC512X family */
 #define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
+#undef CONFIG_FSL_DIU_LOGO_BMP		/* Don't include FSL DIU binary bmp */
 
 /* video */
 #undef CONFIG_VIDEO
@@ -294,6 +295,11 @@
 #endif
 
 /*
+ * IIM - IC Identification Module
+ */
+#undef CONFIG_IIM
+
+/*
  * EEPROM configuration
  */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2	/* 16-bit EEPROM address */
@@ -348,11 +354,20 @@
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_DATE
+#undef CONFIG_CMD_FUSE
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_EXT2
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
 #endif
 
+#if defined(CONFIG_CMD_IDE)
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+#endif /* defined(CONFIG_CMD_IDE) */
+
 /*
  * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.
  * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set
@@ -489,4 +504,48 @@
 #define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc@80000000/serial@11300"
 
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff
+ *-----------------------------------------------------------------------
+ */
+
+#undef  CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
+#undef	CONFIG_IDE_LED			/* LED   for IDE not supported	*/
+
+#define CONFIG_IDE_RESET		/* reset for IDE supported	*/
+#define CONFIG_IDE_PREINIT
+
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 1 drive per IDE bus	*/
+
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC512X_PATA
+
+/* Offset for data I/O			RefMan MPC5121EE Table 28-10	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x00A0)
+
+/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers	RefMan MPC5121EE Table 28-23	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x00D8)
+
+/* Interval between registers	*/
+#define CONFIG_SYS_ATA_STRIDE		4
+
+#define ATA_BASE_ADDR		MPC512X_PATA
+
+/*
+ * Control register bit definitions
+ */
+#define FSL_ATA_CTRL_FIFO_RST_B		0x80000000
+#define FSL_ATA_CTRL_ATA_RST_B		0x40000000
+#define FSL_ATA_CTRL_FIFO_TX_EN		0x20000000
+#define FSL_ATA_CTRL_FIFO_RCV_EN	0x10000000
+#define FSL_ATA_CTRL_DMA_PENDING	0x08000000
+#define FSL_ATA_CTRL_DMA_ULTRA		0x04000000
+#define FSL_ATA_CTRL_DMA_WRITE		0x02000000
+#define FSL_ATA_CTRL_IORDY_EN		0x01000000
+
 #endif	/* __CONFIG_H */
diff --git a/include/mpc512x.h b/include/mpc512x.h
index 05a206358b0..0f022939da6 100644
--- a/include/mpc512x.h
+++ b/include/mpc512x.h
@@ -573,6 +573,31 @@ void iopin_initialize(iopin_t *,int);
 
  /* Register Offset Base */
 #define MPC512X_FEC		(CONFIG_SYS_IMMR + 0x02800)
+#define MPC512X_PATA		(CONFIG_SYS_IMMR + 0x10200)
+
+/* IIM control */
+#define IIM_SET_UA(bk, f)	((bk << 3) | (f >> 5))
+#define IIM_SET_LA(f, bit)	(((f & 0x0000001f) << 3) | bit)
+#define IIM_STAT_BUSY		0x00000080
+#define IIM_STAT_PRGD		0x00000002
+#define IIM_STAT_SNSD		0x00000001
+#define IIM_ERR_WPE		0x00000040
+#define IIM_ERR_OPE		0x00000020
+#define IIM_ERR_RPE		0x00000010
+#define IIM_ERR_WLRE		0x00000008
+#define IIM_ERR_SNSE		0x00000004
+#define IIM_ERR_PARITYE		0x00000002
+#define IIM_PRG_P_SET		0x000000aa
+#define IIM_PRG_P_UNSET		0
+#define IIM_FCTL_PROG_PULSE	0x00000020
+#define IIM_FCTL_PROG		0x00000001
+#define IIM_FCTL_ESNS_N		0x00000008
+#define	IIM_FBAC_FBWP		0x00000080
+#define IIM_FBAC_FBOP		0x00000040
+#define IIM_FBAC_FBRP		0x00000020
+#define	IIM_FBAC_FBESP		0x00000008
+#define IIM_PROTECTION		0x000000e8
+#define IIM_FMAX			31
 
 /* Number of I2C buses */
 #define I2C_BUS_CNT	3