diff options
| author | Nitin Yadav <n-yadav@ti.com> | 2022-11-11 20:25:55 +0530 |
|---|---|---|
| committer | Anand Gadiyar <gadiyar@ti.com> | 2022-11-15 08:14:35 -0600 |
| commit | f177fa88ce55a241a5077f9b96de1b8f223a2de9 (patch) | |
| tree | 2ba4bb95efae6d97297cc9f96f64d4b8e67ecf50 /configs | |
| parent | 7e6273ba3a00e06f1f9c5b9256fcd8a1f77036ca (diff) | |
Revert "configs: am62x_evm_a53_defconfig: Enable configs required to add support for UHS modes"
This essentially reverts ("Revert "configs: am62x_evm_a53_defconfig:
Enable configs required to add support for UHS modes"")
Class U1 UHS cards are failing at U-Boot. Given that now OTAP and
ITAP delay values are updated, Revert above commit to renable UHS
mode support at U-Boot.
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/am62x_evm_a53_defconfig | 23 |
1 files changed, 21 insertions, 2 deletions
diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig index cc7e504ad0..8da91de243 100644 --- a/configs/am62x_evm_a53_defconfig +++ b/configs/am62x_evm_a53_defconfig @@ -13,6 +13,7 @@ CONFIG_TARGET_AM625_A53_EVM=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x680000 CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 +CONFIG_DM_GPIO=y CONFIG_SPL_DM_SPI=y CONFIG_SPL_TEXT_BASE=0x80080000 CONFIG_SPL_MMC_SUPPORT=y @@ -33,22 +34,24 @@ CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY=y CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;" CONFIG_BOARD_LATE_INIT=y +CONFIG_MISC_INIT_R=y +CONFIG_SPL_BOARD_INIT=y CONFIG_AVB_VERIFY=y CONFIG_ANDROID_AB=y -CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y -CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_ETH_SUPPORT=y +CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_NET_SUPPORT=y CONFIG_SPL_NET_VCI_STRING="AM62X U-Boot A53 SPL" +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y @@ -69,6 +72,7 @@ CONFIG_CMD_DM=y # CONFIG_CMD_SPI is not set CONFIG_CMD_AB_SELECT=y CONFIG_CMD_DDRSS=y +# CONFIG_CMD_REGULATOR is not set # CONFIG_CMD_EXT4_WRITE is not set CONFIG_CMD_AVB=y CONFIG_CMD_USB_MASS_STORAGE=y @@ -105,12 +109,20 @@ CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=0 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_TI_SCI_PROTOCOL=y +CONFIG_DA8XX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_SPL_DM_PCA953X=y CONFIG_DM_I2C=y +CONFIG_DM_I2C_GPIO=y CONFIG_SYS_I2C_OMAP24XX=y CONFIG_DM_MAILBOX=y CONFIG_K3_SEC_PROXY=y CONFIG_DM_MMC=y CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_SDHCI=y @@ -134,6 +146,12 @@ CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_SINGLE=y CONFIG_POWER_DOMAIN=y CONFIG_TI_SCI_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_SPL_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SPL_DM_REGULATOR_GPIO=y CONFIG_K3_SYSTEM_CONTROLLER=y CONFIG_REMOTEPROC_TI_K3_ARM64=y CONFIG_DM_RESET=y @@ -157,6 +175,7 @@ CONFIG_SPL_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_DWC3_AM62=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 |