From f177fa88ce55a241a5077f9b96de1b8f223a2de9 Mon Sep 17 00:00:00 2001
From: Nitin Yadav <n-yadav@ti.com>
Date: Fri, 11 Nov 2022 20:25:55 +0530
Subject: Revert "configs: am62x_evm_a53_defconfig: Enable configs required to
 add support for UHS modes"

This essentially reverts ("Revert "configs: am62x_evm_a53_defconfig:
Enable configs required to add support for UHS modes"")

Class U1 UHS cards are failing at U-Boot. Given that now OTAP and
ITAP delay values are updated, Revert above commit to renable UHS
mode support at U-Boot.

Signed-off-by: Nitin Yadav <n-yadav@ti.com>
---
 configs/am62x_evm_a53_defconfig | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

(limited to 'configs')

diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig
index cc7e504ad0..8da91de243 100644
--- a/configs/am62x_evm_a53_defconfig
+++ b/configs/am62x_evm_a53_defconfig
@@ -13,6 +13,7 @@ CONFIG_TARGET_AM625_A53_EVM=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x680000
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
+CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_SPL_TEXT_BASE=0x80080000
 CONFIG_SPL_MMC_SUPPORT=y
@@ -33,22 +34,24 @@ CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY=y
 CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
 CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;"
 CONFIG_BOARD_LATE_INIT=y
+CONFIG_MISC_INIT_R=y
+CONFIG_SPL_BOARD_INIT=y
 CONFIG_AVB_VERIFY=y
 CONFIG_ANDROID_AB=y
-CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_DMA=y
-CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_ETH_SUPPORT=y
+CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_NET_SUPPORT=y
 CONFIG_SPL_NET_VCI_STRING="AM62X U-Boot A53 SPL"
+CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
@@ -69,6 +72,7 @@ CONFIG_CMD_DM=y
 # CONFIG_CMD_SPI is not set
 CONFIG_CMD_AB_SELECT=y
 CONFIG_CMD_DDRSS=y
+# CONFIG_CMD_REGULATOR is not set
 # CONFIG_CMD_EXT4_WRITE is not set
 CONFIG_CMD_AVB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
@@ -105,12 +109,20 @@ CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_SPL_DM_PCA953X=y
 CONFIG_DM_I2C=y
+CONFIG_DM_I2C_GPIO=y
 CONFIG_SYS_I2C_OMAP24XX=y
 CONFIG_DM_MAILBOX=y
 CONFIG_K3_SEC_PROXY=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_SPL_MMC_HS200_SUPPORT=y
 CONFIG_MMC_SDHCI=y
@@ -134,6 +146,12 @@ CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_TI_SCI_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_DM_REGULATOR_GPIO=y
 CONFIG_K3_SYSTEM_CONTROLLER=y
 CONFIG_REMOTEPROC_TI_K3_ARM64=y
 CONFIG_DM_RESET=y
@@ -157,6 +175,7 @@ CONFIG_SPL_DM_USB_GADGET=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_DWC3_AM62=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
-- 
cgit v1.2.3