armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088

IFC-NOR and QSPI-NOR pins are multiplexed on SoC, so they cannot be
accessed simultaneously. IFC-NOR can be accessed along with SD-BOOT.

Ls1088aqds_sdcard_ifc_defconfig is default config for SD boot and
IFC-NOR to be used as flash. This allows writing to IFC-NOR flash.
QSPI and DSPI cannot be accessed in this defconfig.
IFC-NOR image is generated using ls1088aqds_defconfig.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

1 files changed, 37 insertions, 0 deletions

diff --git a/arch/arm/dts/fsl-ls1088a-qds.dts b/arch/arm/dts/fsl-ls1088a-qds.dts
index 225c7c53c7..02000fcba8 100644
--- a/arch/arm/dts/fsl-ls1088a-qds.dts
+++ b/arch/arm/dts/fsl-ls1088a-qds.dts
@@ -19,6 +19,43 @@
 	};
 };
 
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0 0 0x5 0x80000000 0x08000000
+			2 0 0x5 0x30000000 0x00010000
+			3 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus", "fsl,ls1088aqds-fpga",
+				"fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 2 0 0x100>;
+	};
+};
+
 &dspi {
 	bus-num = <0>;
 	status = "okay";