1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
|
# ====================================================================
#
# nano_eth_drivers.cdl
#
# Ethernet drivers - support for i82559 ethernet controller
# on the BSE nanoEngine board.
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later
## version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License
## along with eCos; if not, write to the Free Software Foundation, Inc.,
## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##
## As a special exception, if other files instantiate templates or use
## macros or inline functions from this file, or you compile this file
## and link it with other works to produce a work based on this file,
## this file does not by itself cause the resulting work to be covered by
## the GNU General Public License. However the source code for this file
## must still be made available in accordance with section (3) of the GNU
## General Public License v2.
##
## This exception does not invalidate any other reasons why a work based
## on this file might be covered by the GNU General Public License.
## -------------------------------------------
## ####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): jskov
# Contributors: jskov, hmt
# Date: 2001-02-28
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_DEVS_ETH_ARM_NANO {
display "BSE nanoEngine ethernet driver"
description "
Ethernet driver for BSE nanoEngine board with one or two Intel
i82559 Ethernet controllers attached via the BSE nanoBridge PCI
glue chip."
parent CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_HAL_ARM_SA11X0_NANO
include_dir cyg/io
# FIXME: This really belongs in the INTEL_I82559 package
cdl_interface CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED {
display "Intel i82559 ethernet driver required"
}
define_proc {
puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_INTEL_I82559_INL <cyg/io/devs_eth_nano.inl>"
puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_INTEL_I82559_CFG <pkgconf/devs_eth_arm_nano.h>"
puts $::cdl_system_header "/***** ethernet driver proc output end *****/"
}
cdl_component CYGPKG_DEVS_ETH_ARM_NANO_ETH0 {
display "Nano ethernet port 0 driver"
flavor bool
default_value 1
description "
This option includes the ethernet device driver for the
nanoEngine or nanoBridge port 0 - that is the connector one
slot in from the corner of the board, or the only connector
depending on your particular hardware."
implements CYGHWR_NET_DRIVERS
implements CYGHWR_NET_DRIVER_ETH0
implements CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED
cdl_option CYGDAT_DEVS_ETH_ARM_NANO_ETH0_NAME {
display "Device name for the ethernet port 0 driver"
flavor data
default_value {"\"eth0\""}
description "
This option sets the name of the ethernet device for the
ethernet port 0."
}
cdl_component CYGSEM_DEVS_ETH_ARM_NANO_ETH0_SET_ESA {
display "Set the ethernet station address"
flavor bool
default_value !CYGPKG_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA
description "Enabling this option will allow the ethernet
station address to be forced to the value set by the
configuration. This may be required if the hardware does
not include a serial EEPROM for the ESA, and if RedBoot's
flash configuration support is not available."
cdl_option CYGDAT_DEVS_ETH_ARM_NANO_ETH0_ESA {
display "The ethernet station address"
flavor data
default_value {"{0x00, 0xB5, 0xE0, 0xB5, 0xE0, 0x11}"}
description "The ethernet station address"
}
}
}
cdl_component CYGPKG_DEVS_ETH_ARM_NANO_ETH1 {
display "Nano ethernet port 1 driver"
flavor bool
default_value 1
description "
This option includes the ethernet device driver for the
nanoBridge port 1 - that is the connector on the corner of
the board, far from the power jack and reset button."
implements CYGHWR_NET_DRIVERS
implements CYGHWR_NET_DRIVER_ETH1
implements CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED
cdl_option CYGDAT_DEVS_ETH_ARM_NANO_ETH1_NAME {
display "Device name for the ethernet port 1 driver"
flavor data
default_value {"\"eth1\""}
description "
This option sets the name of the ethernet device for the
ethernet port 1."
}
cdl_component CYGSEM_DEVS_ETH_ARM_NANO_ETH1_SET_ESA {
display "Set the ethernet station address"
flavor bool
default_value !CYGPKG_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA
description "Enabling this option will allow the ethernet
station address to be forced to the value set by the
configuration. This may be required if the hardware does
not include a serial EEPROM for the ESA, and if RedBoot's
flash configuration support is not available."
cdl_option CYGDAT_DEVS_ETH_ARM_NANO_ETH1_ESA {
display "The ethernet station address"
flavor data
default_value {"{0x00, 0xB5, 0xE0, 0xB5, 0xE0, 0x12}"}
description "The ethernet station address"
}
}
}
# note that this option's name is NOT nano-specific, but i82559
# generic - other instantiations can set these also.
cdl_component CYGPKG_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA {
display "RedBoot manages ESA initialization data"
flavor bool
default_value 1
active_if CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
description "Enabling this option will allow the ethernet
station address to be acquired from RedBoot's configuration data,
stored in flash memory. It can be overridden individually by the
'Set the ethernet station address' option for each interface."
cdl_component CYGPKG_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA_VARS {
display "Build-in flash config fields for ESAs"
flavor bool
default_value 1
active_if CYGPKG_REDBOOT
active_if CYGPKG_REDBOOT_FLASH
active_if CYGSEM_REDBOOT_FLASH_CONFIG
active_if CYGPKG_REDBOOT_NETWORKING
description "
This option controls the presence of RedBoot flash
configuration fields for the ESAs of the interfaces when you
are building RedBoot. It is independent of whether RedBoot
itself uses the network or any particular interface; this
support is more for the application to use than for RedBoot
itself, though the application gets at the data by vector
calls; this option cannot be enabled outside of building
RedBoot."
cdl_option CYGVAR_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA_ETH0 {
display "RedBoot manages ESA for eth0"
flavor bool
default_value 1
}
cdl_option CYGVAR_DEVS_ETH_I82559_ETH_REDBOOT_HOLDS_ESA_ETH1 {
display "RedBoot manages ESA for eth1"
flavor bool
default_value 1
}
}
}
}
# EOF nano_eth_drivers.cdl
|
