diff options
Diffstat (limited to 'ecos/packages/devs/eth/mips/upd985xx/current/cdl/upd985xx_eth_drivers.cdl')
| -rw-r--r-- | ecos/packages/devs/eth/mips/upd985xx/current/cdl/upd985xx_eth_drivers.cdl | 204 |
1 files changed, 204 insertions, 0 deletions
diff --git a/ecos/packages/devs/eth/mips/upd985xx/current/cdl/upd985xx_eth_drivers.cdl b/ecos/packages/devs/eth/mips/upd985xx/current/cdl/upd985xx_eth_drivers.cdl new file mode 100644 index 0000000..7357aca --- /dev/null +++ b/ecos/packages/devs/eth/mips/upd985xx/current/cdl/upd985xx_eth_drivers.cdl @@ -0,0 +1,204 @@ +# ==================================================================== +# +# upd985xx_eth_drivers.cdl +# +# Ethernet drivers +# NEC uPD985xx device specific support +# +# ==================================================================== +## ####ECOSGPLCOPYRIGHTBEGIN#### +## ------------------------------------------- +## This file is part of eCos, the Embedded Configurable Operating System. +## Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. +## +## eCos is free software; you can redistribute it and/or modify it under +## the terms of the GNU General Public License as published by the Free +## Software Foundation; either version 2 or (at your option) any later +## version. +## +## eCos is distributed in the hope that it will be useful, but WITHOUT +## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +## for more details. +## +## You should have received a copy of the GNU General Public License +## along with eCos; if not, write to the Free Software Foundation, Inc., +## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +## +## As a special exception, if other files instantiate templates or use +## macros or inline functions from this file, or you compile this file +## and link it with other works to produce a work based on this file, +## this file does not by itself cause the resulting work to be covered by +## the GNU General Public License. However the source code for this file +## must still be made available in accordance with section (3) of the GNU +## General Public License v2. +## +## This exception does not invalidate any other reasons why a work based +## on this file might be covered by the GNU General Public License. +## ------------------------------------------- +## ####ECOSGPLCOPYRIGHTEND#### +# ==================================================================== +######DESCRIPTIONBEGIN#### +# +# Author(s): hmt +# Original data: hmt +# Contributors: gthomas +# Date: 2001-06-28 +# +#####DESCRIPTIONEND#### +# +# ==================================================================== + +cdl_package CYGPKG_DEVS_ETH_MIPS_UPD985XX { + display "NEC uPD985xx ethernet driver" + + parent CYGPKG_IO_ETH_DRIVERS + active_if CYGPKG_IO_ETH_DRIVERS + active_if CYGPKG_HAL_MIPS_UPD985XX + + implements CYGHWR_NET_DRIVER_ETH0 + + implements CYGHWR_NET_DRIVERS + include_dir cyg/devs/eth + + description "Ethernet driver for NEC uPD985xx devices." + compile -library=libextras.a if_upd985xx.c + + cdl_option CYGDBG_DEVS_ETH_MIPS_UPD985XX_CHATTER { + display "Prints ethernet device status info during startup" + default_value 0 + description " + The ethernet device initialization code can print lots of info + to confirm that it has booted correctly." + } + + cdl_option CYGNUM_DEVS_ETH_MIPS_UPD985XX_DEV_COUNT { + display "Number of supported interfaces." + #legal_values 1 + #default_value 1 + calculated 1 + flavor data + description " + This option selects the number of ethernet interfaces to + be supported by the driver." + } + + cdl_component CYGPKG_DEVS_ETH_MIPS_UPD985XX_ETH0 { + display "Ethernet port 0 driver" + flavor bool + calculated 1 + description " + This option includes the ethernet device driver for + port 0 - that is the only connector + depending on your particular hardware." + + + cdl_option CYGDAT_DEVS_ETH_UPD985XX_ETH0_NAME { + display "Device name for the ethernet port 0 driver" + flavor data + default_value {"\"eth0\""} + description " + This option sets the name of the ethernet device for the + ethernet port 0." + } + + cdl_component CYGSEM_DEVS_ETH_UPD985XX_ETH0_SET_ESA { + display "Set the ethernet station address" + flavor bool + default_value false + requires !CYGSEM_DEVS_ETH_UPD985XX_ETH0_GET_EEPROM_ESA + description "Enabling this option will allow the ethernet + station address to be forced to the value set by the + configuration. This may be required if the hardware does + not include a serial EEPROM for the ESA." + + cdl_option CYGDAT_DEVS_ETH_UPD985XX_ETH0_ESA { + display "The ethernet station address" + flavor data + default_value {"{0x00, 0xBA, 0xCA, 0xDD, 0x1E, 0xDD}"} + description "The ethernet station address" + } + } + + cdl_option CYGSEM_DEVS_ETH_UPD985XX_ETH0_GET_EEPROM_ESA { + display "Get the ethernet station address from EEPROM" + flavor bool + default_value !CYGSEM_DEVS_ETH_UPD985XX_ETH0_SET_ESA + requires !CYGSEM_DEVS_ETH_UPD985XX_ETH0_SET_ESA + description "Enabling this option will allow the ethernet + station address to be read from a serial EEPROM (such as 93C06, + 93C46...). If this is not valid, your application must set the + ESA manually via an ioctl() call or similar." + } + } + + cdl_component CYGPKG_DEVS_ETH_MIPS_UPD985XX_OPTIONS { + display "NEC uPD985xx ethernet driver build options" + flavor none + no_define + + cdl_option CYGPKG_DEVS_ETH_MIPS_UPD985XX_CFLAGS_ADD { + display "Additional compiler flags" + flavor data + no_define + default_value { "-D_KERNEL -D__ECOS" } + description " + This option modifies the set of compiler flags for + building the NEC uPD985xx ethernet driver + package. These flags are used in addition to the set of + global flags." + } + } + + cdl_component CYGPKG_DEVS_ETH_MIPS_UPD985XX_HARDWARE_BUGS { + display "Workarounds for Ethernet Hardware bugs " + flavor bool + default_value 1 + description " + This component controls whether code workarounds for the numerous + hardware bugs in the uPD98503 Ethernet device are included. + These might not all be necessary depending on the speed and mode in + which the interface is used. Please refer to the manufacturer's + Behaviour Analysis Report to make your decision about which of + these options to enable or disable. + The default is to enable all workarounds for best reliability." + + cdl_option CYGOPT_DEVS_ETH_MIPS_UPD985XX_HARDWARE_BUGS_S1 { + display "S1 - CPU to IBUS write restriction" + flavor bool + default_value 1 + description "Enable a workaround for hardware bug S1" + } + cdl_component CYGOPT_DEVS_ETH_MIPS_UPD985XX_HARDWARE_BUGS_E1E2 { + display "E1,E2 - Status queue corruption and MAC filtering" + flavor bool + default_value 1 + description "Enable a workaround for hardware bugs E1 and/or E2." + + cdl_option CYGOPT_DEVS_ETH_MIPS_UPD985XX_HARDWARE_BUGS_E1E2_E2ONLY { + display "Do not set device in promisc mode - solve E2 only" + flavor bool + default_value 1 + description "Work around bug E2 only - do not set the device + in promiscuous mode by default. + Setting this option prevents the work around + for bug E1." + } + } + cdl_option CYGOPT_DEVS_ETH_MIPS_UPD985XX_HARDWARE_BUGS_E3 { + display "E3 - Transmit descriptor error" + flavor bool + default_value 1 + description "Enable a workaround for hardware bug E3" + + } + cdl_option CYGOPT_DEVS_ETH_MIPS_UPD985XX_HARDWARE_BUGS_E8 { + display "E8 - Transmission error under abnormal conditions" + flavor bool + default_value 1 + description "Enable a workaround for hardware bug E8" + } + } +} + +# EOF upd985xx_eth_drivers.cdl |