summaryrefslogtreecommitdiff
path: root/cpu
AgeCommit message (Expand)Author
2012-09-12ENGR00218972 MX6 Secure Boot, Change to dynamic HAB data authenticationEric Sun
2012-09-12ENGR00217401 common: fix build warningXinyu Chen
2012-09-12ENGR00217114-1 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SLEric Sun
2012-09-12ENGR00211038 Fix the PAD_LVE implementationMahesh Mahadevan
2012-09-12ENGR00210918-2 cleanup android support, build pass all boardsZhang Jiejing
2012-09-12ENGR00209899-2 MX6Q: cleanup: cleanup fastboot, udc warnning.Zhang Jiejing
2012-09-12ENGR00210014 i.mx6 : i.mx6sl : add PAD_CTL_LVE support for pad configurationEric Sun
2012-09-12ENGR00209059 android: refine fastboot and recovery support.Zhang Jiejing
2012-09-12ENGR00181337-1 i.mx6 : add initial support for i.mx6slEric Sun
2012-09-12ENGR00180623 fastboot: add fastboot in MX6Q_SABERSD boardsZhang Jiejing
2012-09-12ENGR00179762: i.MX6: print the SOC revision correctlyJason Liu
2012-09-05ENGR00174625: Remove build warnings for mx6qTerry Lv
2012-09-05ENGR00174104-1: Add conditional CONFIG to fix build breakTerry Lv
2012-09-05ENGR00171771 [MX6]Need to power down PCIe by defaultAnson Huang
2012-09-05ENGR00171091 [MX6]Remove workaround for reset issueAnson Huang
2012-09-05ENGR00171008 MX6Q/MFGTOOL : disable the workaround for MFGTOOLHuang Shijie
2012-09-05ENGR00170837 [MX6]Add temperatuer check into ubootAnson Huang
2012-09-05ENGR00162642: Fix bug in setting VDDSOC voltageRanjani Vaidyanathan
2012-09-05ENGR00160621 [MX6]Workaround for reset issueAnson Huang
2012-09-05ENGR00170299-1 Android: add support fastboot functionZhang Jiejing
2012-09-05ENGR00163513 MX6Q-UBOOT : Add download_mode cmdEric Sun
2012-09-05ENGR00162938 MX5: Add download_mode command in uboot to enter MFG download mode.Zhang Jiejing
2012-09-05ENGR00162874: Add enet clk change support for mx6Terry Lv
2012-09-05ENGR00162570: MX6-Increase VDDSOC_CAP voltage to 1.2VRanjani Vaidyanathan
2012-09-05ENGR00161373 Move the MAC address read from fuse code to MX6 SoC fileMahesh Mahadevan
2012-09-05ENGR00161254 MX6Q: Add NAND support in UbootAllen Xu
2012-09-05ENGR00139215 iMX61 Uboot support blow fuseRyan QIAN
2012-09-05ENGR00139254: Enable MX6Q Uboot Splash ScreenSandor Yu
2012-09-05ENGR00155283: Set dpgdck0_2_en to 0 when freq is lower than 300MHzTerry Lv
2012-09-05ENGR00155156 [MX6]Clean up debug info in ubootAnson Huang
2012-09-05ENGR00151310 mx53 smd: force warm reset as cold resetLily Zhang
2012-09-05ENGR00144424 MX6: enable uboot for ARM2(SABREAUTO) CPU boardAnson Huang
2012-09-05ENGR00143298: Reinit uart after using clk commandTerry Lv
2012-09-05ENGR00143469 mx53 smd: pull down GPIO_9 to reset the boardLily Zhang
2012-09-05ENGR00141885: mx50 and mx53 reboot fail when booting from spi norTerry Lv
2012-09-05ENGR00141335-2: get more accurate ipg_per clock frequencyTerry Lv
2012-09-05ENGR00141556: Fix copyright issueTerry Lv
2012-09-05ENGR00140824 Android: Enable fastboot support for mx50 rdpSammy He
2012-09-05ENGR00140767: Improve mx5x DDR clock functionTerry
2012-09-05ENGR00138468-1 MX5 video:Disable DP/DC/DI/IDMAC before go to kernelLiu Ying
2012-09-05ENGR00137894-2 MX53: Add ipu base addr and ipu clockLiu Ying
2012-09-05ENGR00137604: Change PLL4 to 455MHz for mx53Terry Lv
2012-09-05ENGR00137372 MX53: Switch back to use DCD and update DDR scriptsLily Zhang
2012-09-05ENGR00134068 MX51 BBG:Support CLAA WVGA splashimageLiu Ying
2012-09-05ENGR00133727: uart outputs messy code when kernel starts on mx51Terry Lv
2012-09-05ENGR00134098-2 MX53: Add fastboot support for android.Sammy He
2012-09-05ENGR00134098-1 MX51: Update fastboot usb init seqSammy He
2012-09-05ENGR00133551-1 Add freescale usb udc support for i.mx51 platform.Sammy He
2012-09-05ENGR00132909 MX53 Uboot: Support for TO2Anish Trivedi
2012-09-05ENGR00133049 Support nand flash for MX28Frank Li
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-23 12:31:58 +0000