summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Expand)Author
2018-05-01tdx-cfg-block: add config block supportStefan Agner
2018-02-06apalis-imx8: load HDMI firmwareStefan Agner
2018-02-05apalis-imx8: fix EthernetStefan Agner
2018-02-05apalis-imx8: remove PCA9557 GPIO controllersStefan Agner
2018-02-05apalis-imx8: add Apalis iMX8 specific device treeStefan Agner
2018-02-05apalis-imx8: initial addStefan Agner
2018-01-17MA-10983-1 Load HDMI firmware from u-boot.binHaoran.Wang
2018-01-04MA-10983 Load HDMI firmware before bootHaoran.Wang
2017-12-22MLK-17278 imx8qxp_mek: Enable USB OTG port on base boardYe Li
2017-12-20MA-10933 [Android] android daily build failedzhang sanshan
2017-12-19MLK-17205-3 video: imx: hdp: Adding configs for HDP firmware loadingOliver Brown
2017-12-12MLK-17119 i.MX8QM DDR4 ARM2 SupportTeo Hall
2017-12-11MLK-17145 imx: mx6qpsabresd: use mx6qp.cfg for optee supportPeng Fan
2017-12-08MLK-17109-4 imx8mq_arm2: Add i.MX8MQ DDR3L and DDR4 ARM2 boards supportYe Li
2017-12-05MLK-17082-02 imx: add optee support for imx6slBai Ping
2017-12-05MLK-17082-01 imx: add optee support for imx6sllBai Ping
2017-12-04MLK-17050 imx8m: print out atf commitPeng Fan
2017-11-16MA-10622 add android configure to support mx8qm mek boardRichard Liu
2017-11-10MLK-16794 imx8qxp: support ddr3 arm2 boardPeng Fan
2017-11-10MLK-16753-9 imx: mx7: add optee supportPeng Fan
2017-11-10MLK-16753-8 imx: mx6ul/ull: add optee supportPeng Fan
2017-11-10MLK-16753-7 imx: mx6sx: add optee supportPeng Fan
2017-11-10MLK-16753-6 imx: mx6sabresd: add optee supportPeng Fan
2017-11-10MLK-16753-5 imx: mx6qsabreauto: add optee supportPeng Fan
2017-11-03MLK-16758-2 imx8qxp_mek: Enable USBOTG1 support on MEK base board for androidYe Li
2017-11-03MA-10570[Android] Change bootdelay to 1s for imx8 to avoid stopping at u-boot...Zhang Bo
2017-11-03[iot] Add ATX support in Trusty OS enabled configHaoran.Wang
2017-11-03[iot] Refine IMX_TRUSTY_OS config in defconfigsHaoran.Wang
2017-11-03MA-10482-1 [Android] enable FIT for androidzhang sanshan
2017-11-03MLK-16608: configs: add flexspi config for imx8qm mekHan Xu
2017-11-03MLK-16598-2: configs: add flexspi config for i.mx8qxp mekHan Xu
2017-11-03MA-10476[Android]Remove <board>_nand_defconfig used for androidZhang Bo
2017-11-03MLK-16599 imx8m: support SPL FITPeng Fan
2017-11-03Kconfig: fix SPL_FIT dependencyAndre Przywara
2017-11-03MA-10339 Cancel the 3 seconds countdown before autobootji.luo
2017-11-03MA-10337-3 Add ATX support for i.MX6UL and i.MX7Dji.luo
2017-11-03MA-9478-3 [iot] Enable Trusty for pico-imx6ulHaoran.Wang
2017-11-03MA-10334 Rename Aquila board name to spriot board nameji.luo
2017-11-03MA-9478-1 [iot] Enable Trusty for iopb6ul and pico7dHaoran.Wang
2017-11-03MLK-16503 imx8qm_mek: Add support for QM MEK boardYe Li
2017-11-03MLK-16431-3 imx8qxp_mek: Enable the USB3.0 XHCI driverYe Li
2017-11-03MLK-16326 imx8qxp_mek: Add LVDS0 display support for splash screenYe Li
2017-11-03MLK-16238-3 imx8m_evk: Update codes to enable TMUYe Li
2017-11-03MLK-16208-3 imx8qm/qxp: Enable the CPU thermal sensor to get temperatureYe Li
2017-11-03MLK-16198-4 imx8qm/qxp: Update ARM2 boards to support xhci and ehci at same timeYe Li
2017-11-03MLK-16187: i.mx8qm/qxp: add flexspi configurations for QM/QXPHan Xu
2017-11-03MLK-16181 imx8qm/qxp: Add dcache flush to M4 boot commandsYe Li
2017-11-03MLK-16034-03: support NAND on i.MX8QXP ARM2 boardHan Xu
2017-11-03MA-10022 [Android] uboot: add driver model in android on imx8mq boardzhang sanshan
2017-11-03MLK-16132-9: imx8mq: evk: enable CMD_PMICPeng Fan
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-23 11:20:15 +0000