summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Expand)Author
2018-11-29apalis-imx8: forward port to 2018.03toradex_imx_v2018.03_4.14.62_1.0.0_beta-bringupMax Krummenacher
2018-11-29colibri-imx8qxp: forward port to 2018.03Max Krummenacher
2018-11-29apalis-imx8.c: fix typoMax Krummenacher
2018-11-29pf8100: add pmic fusing commandMax Krummenacher
2018-11-29colibri-imx8qxp: synchronize with imx8qxp-mek from beta2Max Krummenacher
2018-11-29colibri-imx8qxp: move debug uart to lpuart3Max Krummenacher
2018-11-29colibri-imx8qxp: initial addMax Krummenacher
2018-11-29tdx-cfg-block.c: correct colibri imx8 stringMax Krummenacher
2018-11-29tdx-cfg-block: add Apalis iMX8 QuadMax supportStefan Agner
2018-11-29toradex: configblock: add an -y parameter to 'cfgblock create’Dominik Sliwa
2018-11-29toradex: configblock: initialize MMC before switching partitionStefan Agner
2018-11-29tdx-cfg-block: add config block supportStefan Agner
2018-11-29tdx-cfg-block: add new SKUsStefan Agner
2018-11-29tdx-cfg-block: add new sku'sMax Krummenacher
2018-11-29apalis-imx8: remove unused GPIOsStefan Agner
2018-11-29apalis-imx8: use UART1 as console UARTStefan Agner
2018-11-29apalis-imx8: fix EthernetStefan Agner
2018-11-29apalis-imx8: remove PCA9557 GPIO controllersStefan Agner
2018-11-29apalis-imx8: fix eMMC/MMC/SD interface muxingStefan Agner
2018-11-29apalis-imx8: initial addStefan Agner
2018-10-12MLK-19904 imx8mm_ddr4_evk: Update the mr value settingBai Ping
2018-10-11MLK-19881 imx8mq_arm2: Fix SPL issue to support uuuYe Li
2018-10-10MLK-19777-03: imx8mm_evk: Optimize the ddr4 init flowBai Ping
2018-10-10MLK-19777-02 imx8mm: rename lpddr4_timing variable to dram_timing.Bai Ping
2018-09-29MLK-19762 imx8mm: Fix i2c pad issue in SPLYe Li
2018-09-29MLK-19769-1 iMX8QM SPL: Add QSPI support for imx8qm_mekAbel Vesa
2018-09-29MLK-19770-1 iMX8QM SPL: board: imx8qm_mek: Add spl implementationAbel Vesa
2018-09-29MLK-19183-14: iMX8QXP SPL: Add ARM2 board supportTeo Hall
2018-09-20MLK-19645 mx6ulz_evk: Fix fdt_file variable issueYe Li
2018-09-20MLK-19625 mx6ulz_evk: Disable the FEC driver and support USB2NET dongleYe Li
2018-09-18MLK-19183-12 iMX8QXP SPL: Add QSPI support for imx8qxp_mekAbel Vesa
2018-09-17MLK-19599 imx8mm_ddr4_evk: Add NAND boot supportYe Li
2018-09-14MLK-19589 baord: imx6ulz: add imx6ulz supportBai Ping
2018-09-12MA-12669 imx8qm/qxp_mek: Guard TCPC codes with proper configLuo Ji
2018-09-11MLK-19541 imx8mm_evk: Add imx8mm DDR4 EVK CPU board supportYe Li
2018-09-07MLK-19483: i.MX6/7: pack qspi header with u-boot for i.MX6/7 qspi u-bootHan Xu
2018-09-03MLK-19380 imx8mq_evk: update the ddr controller QoS settingTom.zheng
2018-08-30MA-12552 Adjust SPL malloc pool and stack addressLuo Ji
2018-08-30MA-12551 [iot] Change configs to enable uuu on AIYLuo Ji
2018-08-21MLK-19263-2 imx8mq_evk: Adjust SPL malloc pool and stack addressYe Li
2018-08-21MLK-19223 arm: imx8mm: add MXC_XXX_CLK clock map for imx common codeHaibo Chen
2018-08-21MA-12244-1 [Android] Load HDMI RX firmware for imx8qmLuo Ji
2018-08-21[iot] Change VDD_DRAM to 0.9V which is valid in datasheetZhang Bo
2018-08-21[iot] Change VDD_3V3 to 3.1V and VDD_1V8 to 1.695VZhang Bo
2018-08-20[iot] Decrease panbell DDR frequency to 1600 MTSLuo Ji
2018-08-20[iot] Support 1G DDR AIY boardLuo Ji
2018-08-20MA-12124 [Android] Fix build warnings for u-bootLuo Ji
2018-08-20[iot] Move i2c_setup calls to board_initBraden Kell
2018-08-16MLK-19249-1 imx8mq_evk/arm2: Force DWC3 gadget to high speedYe Li
2018-08-16MLK-18502: board:imx8mm_evk enable tzascSilvano di Ninno
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-15 08:37:50 +0000