summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2018-10-31scfw: add additional controls for pmic i2c accessMax Krummenacher
2018-10-31scfw: update to the 0.7 api filesMax Krummenacher
2018-10-31colibri-imx8qxp: move debug uart to lpuart3Max Krummenacher
2018-10-31colibri-imx8qxp: initial addMax Krummenacher
2018-10-08apalis-imx8: use UART1 as console UARTStefan Agner
2018-10-08imx8: support UART1 as console UART for Apalis iMX8Stefan Agner
2018-10-08apalis-imx8: remove PCA9557 GPIO controllersStefan Agner
2018-10-08apalis-imx8: remove unavailable peripheralsStefan Agner
2018-10-08apalis-imx8: fix eMMC/MMC/SD interface muxingStefan Agner
2018-10-08apalis-imx8: add Apalis iMX8 specific device treeStefan Agner
2018-10-08apalis-imx8: initial addStefan Agner
2018-09-05MLK-19465 imx8mq: Fix cpu rev issue on B0.1 chipYe Li
2018-09-04MLK-18901-4 imx8qm/qxp: Add clocks command supportYe Li
2018-09-04MLK-19433-2 imx8mq: Get chip rev for B1 revisionYe Li
2018-09-04MLK-19433-1 imx: Add macro for chip rev 2.1Ye Li
2018-09-03MLK-19355 imx8mm: Enable sec_debug clock in SPLYe Li
2018-08-28MA-12536[Android] Enable RTC for imx8m in ubootZhang Bo
2018-08-21MLK-19223 arm: imx8mm: add MXC_XXX_CLK clock map for imx common codeHaibo Chen
2018-08-16MLK-18502: board:imx8mm_evk enable tzascSilvano di Ninno
2018-08-08MLK-19159 imx8mm_evk: Fix build break for flexspi defconfigYe Li
2018-07-27MLK-19079 DTS: imx8qm/qxp: Change thermal zone alert temperatureYe Li
2018-07-23ARM: adjust arm-smccc code for use in U-BootMasahiro Yamada
2018-07-23ARM: import arm-smccc code from Linux 4.11-rc6Masahiro Yamada
2018-07-20MLK-18431-03 imx8mm_evk: use the more generic dram init flow on imx8mm evkBai Ping
2018-07-20MLK-18431-02: add a more generic dram init flow for imx8mBai Ping
2018-07-19MLK-18926-3 ARM64: dts: fsl-imx8mq: correct usdhc pad SRE settingHaibo Chen
2018-07-18MLK-18945-10 imx8mm_evk: Add splash screen support for MIPI DSIYe Li
2018-07-18MLK-18945-9 imx8mm: Update SOC codes to support LCDIFYe Li
2018-07-15MLK-18897 imx8qm/qxp: Fix build warning in fuse driverYe Li
2018-07-12MLK-18862 imx8mm uuu can write emmc by fastbootFrank Li
2018-07-11MLK-18823 mx6ul/mx6ull: Add workaround for LCDIF display when optee enabledYe Li
2018-07-11MLK-18406 fastboot support all partitionFrank Li
2018-07-05MLK-18623-3 imx8mm: Set NOC clock root to 750MhzYe Li
2018-07-04[iot] Check Trusty OS available before load itYu Shan
2018-07-04[iot] Make dcache inner shareableHaoran.Wang
2018-07-04[iot] Add imx8m-phanbell supportHaoran.Wang
2018-07-02MLK-18732-1: Add SMC based fuse command for MX8Teo Hall
2018-06-25MLK-18654-2 imx: Change USB boot device typeYe Li
2018-06-25toradex: imx6: Move g_dnl_bind_fixup() into common SPL codeFabio Estevam
2018-06-21MLK-18639-3 imx8mm_val: Add board codes for iMX8MM DDR4 validation boardYe Li
2018-06-21MLK-18639-2 DTS: imx8mm_val: Add DTS for iMX8MM DDR4 validation boardYe Li
2018-06-21MLK-18639-1 imx8mm: clock: Add API to enable/disable DDR bypass clockYe Li
2018-06-14MLK-18614-3 Xen: imx8qm_mek: Fix the CONFIG_FASTBOOT_USB_DEV and DTB issueYe Li
2018-06-14MLK-18436-2 imx8: partition: add size checkPeng Fan
2018-06-14MLK-18436-1 imx8: partition: set partition id into reg propertyPeng Fan
2018-06-13MLK-18577-7 imx8qm: mek: support uboot in vmPeng Fan
2018-06-13MLK-18577-6 imx8: boot0: add boot headerPeng Fan
2018-06-13MLK-18577-5 imx8: update soc code to support uboot in XEN VMPeng Fan
2018-06-13MLK-18577-3 armv8: xen: add console write hypercallPeng Fan
2018-05-30MLK-18435-1 imx8: partition: set grant to truePeng Fan
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-20 19:36:31 +0000