summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2010-11-10not able to modify "$bootfile" environment variable2009.11-p1020-rdb-201004210551Poonam Aggrwal
2010-11-10tsec: Wait for both RX and TX to stopAndy Fleming
2010-11-10While we had ft_pci_board_setup it wasn't being called by ft_board_setup. Fix...Poonam Aggrwal
2010-11-10eSDHC: add the reset function to reset the eSDHC controllerDipen Dudhat
2010-11-10sdboot env variable to boot Linux from SD Card on P1 and P2 RDB PlatformsDipen Dudhat
2010-11-1085xx: Fix enabling of L1 cache parity on secondary coresSandeep Gopalpet
2010-11-10add CW debug supportebony.zhu@freescale.com
2010-11-10Workaround for manual CMD12 issue on P1020/P1022 PlatformsDipen Dudhat
2010-11-10use maximum timeout for eSDHCDipen Dudhat
2010-11-10Assign Initial clock speed for eSDHC controllerDipen Dudhat
2010-11-10fix wrong clock mask for eSDHC DriverDipen Dudhat
2010-11-10fix the voltage validation process in eSDHC DriverDipen Dudhat
2010-11-10Reverted define of 1.8v eSDHC ErrataDipen Dudhat
2010-11-10p1_p2_rdb: Modify the CLK_CTRL value for DDR at 667MHzSandeep Gopalpet
2010-11-10Set default environment variables for P2020/10, P1020/11Sandeep Gopalpet
2010-11-10Set HID1[mbdd] bit for optimal eieioSandeep Gopalpet
2010-11-1085xx/p1_p2_rdb: p1020: rework muxed usb2handlingSandeep Gopalpet
2010-11-10p1_p2_rdb: Remove printing of the board revision.Sandeep Gopalpet
2010-11-10P2020RDB Rev D board support for NAND Boot using GPIODipen Dudhat
2010-11-10eSDHC changes for P2020 Rev 2.0Dipen Dudhat
2010-11-10P2020RDB RevD Board detection support using GPIODipen Dudhat
2010-11-10eSDHC 1.8v erratum workaround for P1022 and P1020Sandeep Gopalpet
2010-11-1085xx/fdt.c: Extend stashing parameter support for "fsl,etsec2" devicesSandeep Gopalpet
2010-11-1085xx/p1_p2_rdb: p1020: DDR changesSandeep Gopalpet
2010-11-1085xx/p1_p2_rdb: enable hwconfigVivek Mahajan
2010-11-1085xx/p1_p2_rdb: p1020: add muxed usb2 handlingSandeep Gopalpet
2010-11-10P2020RDB: cache-sram-size support in envRajesh Gumasta
2010-11-10Add RAMBOOT support over SD card boot on P1 and P2 RDB platformsDipen Dudhat
2010-11-10Get the Address for env on SD Card for SD Boot on P1 and P2 RDB PlatformsDipen Dudhat
2010-11-10Add support to save environments on SD cardDipen Dudhat
2010-11-10Make mmc_init before env_initDipen Dudhat
2010-11-10Enable env support for SD and eSPI boot on P1 and P2 RDB platformsDipen Dudhat
2010-11-10Make DDR use default for P1 and P2 platformsDipen Dudhat
2010-11-10ppc/85xx: make boot from NAND full relocation to RAMMingkai Hu
2010-11-10NET: Base support for etsec2.0Sandeep Kumar
2010-11-10NET: Move MDIO regs out of TSEC SpaceSandeep Kumar
2010-11-10eSPI and Intel E1000 support for P1/P2 RDBPoonam Aggrwal
2010-11-10eSPI controller support under the SPI framework.Poonam Aggrwal
2010-11-10DDR support for eSDHC/NAND/eSPI bootingDipen Dudhat
2010-11-10Workaround for AHB2MAG IRQ BypassDipen Dudhat
2010-11-10Configure eSDHC using I2C deviceDipen Dudhat
2010-11-10Enable PIO mode for eSDHC DriverDipen Dudhat
2009-12-15Update CHANGELOG; prepare Prepare v2009.11v2009.11Wolfgang Denk
2009-12-15mpc85xx, mpc86xx: Fix gd->cpu pointer after relocationPeter Tyser
2009-12-14MVBLUE: Remove CONFIG_CMD_IRQPeter Tyser
2009-12-14imx27lite: Reenable MTD support on NOR flash.Detlev Zundel
2009-12-11nand: Fix access to last block in NAND devicesStefan Roese
2009-12-09mpc83xx: boot time regression, move LCRR setup back to cpu_init_fPeter Korsgaard
2009-12-08microblaze: Correct ffs regression for MicroblazeMichal Simek
2009-12-08microblaze: Stop stack clobbering in microblaze-generic.Graeme Smecher
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-19 03:30:05 +0000