diff options
| -rw-r--r-- | docs/plat/synquacer.rst | 117 | ||||
| -rw-r--r-- | maintainers.rst | 11 | ||||
| -rw-r--r-- | plat/socionext/synquacer/platform.mk | 46 | ||||
| -rw-r--r-- | readme.rst | 2 |
4 files changed, 175 insertions, 1 deletions
diff --git a/docs/plat/synquacer.rst b/docs/plat/synquacer.rst new file mode 100644 index 00000000..ca53deb5 --- /dev/null +++ b/docs/plat/synquacer.rst @@ -0,0 +1,117 @@ +Trusted Firmware-A for Socionext Synquacer SoCs +=============================================== + +Socionext's Synquacer SC2A11 is a multi-core processor with 24 cores of Arm +Cortex-A53. The Developerbox, of 96boards, is a platform that contains this +processor. This port of the Trusted Firmware only supports this platform at +the moment. + +More information are listed in `link`_. + +How to build +============ + +Code Locations +-------------- + +- Trusted Firmware-A: + `link <https://github.com/ARM-software/arm-trusted-firmware>`__ + +- edk2: + `link <https://github.com/tianocore/edk2>`__ + +- edk2-platforms: + `link <https://github.com/tianocore/edk2-platforms>`__ + +- edk2-non-osi: + `link <https://github.com/tianocore/edk2-non-osi>`__ + +Boot Flow +--------- + +SCP firmware --> TF-A BL31 --> UEFI(edk2) + +Build Procedure +--------------- + +- Firstly, in addition to the “normal” build tools you will also need a + few specialist tools. On a Debian or Ubuntu operating system try: + + .. code:: shell + + sudo apt install acpica-tools device-tree-compiler uuid-dev + +- Secondly, create a new working directory and store the absolute path to this + directory in an environment variable, WORKSPACE. It does not matter where + this directory is created but as an example: + + .. code:: shell + + export WORKSPACE=$HOME/build/developerbox-firmware + mkdir -p $WORKSPACE + +- Run the following commands to clone the source code: + + .. code:: shell + + cd $WORKSPACE + git clone https://github.com/ARM-software/arm-trusted-firmware -b master + git clone https://github.com/tianocore/edk2.git -b master + git clone https://github.com/tianocore/edk2-platforms.git -b master + git clone https://github.com/tianocore/edk2-non-osi.git -b master + +- Build ATF: + + .. code:: shell + + cd $WORKSPACE/arm-trusted-firmware + make -j`nproc` PLAT=synquacer PRELOADED_BL33_BASE=0x8200000 bl31 fiptool + tools/fiptool/fiptool create \ + --tb-fw ./build/synquacer/release/bl31.bin \ + --soc-fw ./build/synquacer/release/bl31.bin \ + --scp-fw ./build/synquacer/release/bl31.bin \ + ../edk2-non-osi/Platform/Socionext/DeveloperBox/fip_all_arm_tf.bin + +- Build EDK2: + + .. code:: shell + + cd $WORKSPACE + export PACKAGES_PATH=$WORKSPACE/edk2:$WORKSPACE/edk2-platforms:$WORKSPACE/edk2-non-osi + export ACTIVE_PLATFORM="Platform/Socionext/DeveloperBox/DeveloperBox.dsc" + export GCC5_AARCH64_PREFIX=aarch64-linux-gnu- + unset ARCH + + . edk2/edksetup.sh + make -C edk2/BaseTools + + build -p $ACTIVE_PLATFORM -b RELEASE -a AARCH64 -t GCC5 -n `nproc` -D DO_X86EMU=TRUE + +- The firmware image, which comprises the option ROM, ARM trusted firmware and + EDK2 itself, can be found $WORKSPACE/../Build/DeveloperBox/RELEASE_GCC5/FV/. + Use SYNQUACERFIRMWAREUPDATECAPSULEFMPPKCS7.Cap for UEFI capsule update and + SPI_NOR_IMAGE.fd for the serial flasher. + + Note #1: -t GCC5 can be loosely translated as “enable link-time-optimization”; + any version of gcc >= 5 will support this feature and may be used to build EDK2. + + Note #2: Replace -b RELEASE with -b DEBUG to build a debug. + +Install the System Firmware +--------------------------- + +- Providing your Developerbox is fully working and has on operating system + installed then you can adopt your the newly compiled system firmware using + the capsule update method:. + + .. code:: shell + + sudo apt install fwupdate + sudo fwupdate --apply {50b94ce5-8b63-4849-8af4-ea479356f0e3} \ + SYNQUACERFIRMWAREUPDATECAPSULEFMPPKCS7.Cap + sudo reboot + +- Alternatively you can install SPI_NOR_IMAGE.fd using the `board recovery method`_. + +.. _link: https://www.96boards.org/product/developerbox/ +.. _board recovery method: https://www.96boards.org/documentation/enterprise/developerbox/installation/board-recovery.md.html diff --git a/maintainers.rst b/maintainers.rst index 96ff0e06..4466a56e 100644 --- a/maintainers.rst +++ b/maintainers.rst @@ -132,6 +132,16 @@ Files: - plat/rockchip/\* +Synquacer platform sub-maintainer +--------------------------------- + +Sumit Garg (sumit.garg@linaro.org, `b49020`_) + +Files: + +- docs/plat/synquacer.rst +- plat/socionext/synquacer/\* + Texas Instruments platform sub-maintainer ----------------------------------------- @@ -183,3 +193,4 @@ Etienne Carriere (etienne.carriere@linaro.org, `etienne-lms`_) .. _etienne-lms: https://github.com/etienne-lms .. _qoriq-open-source: https://github.com/qoriq-open-source .. _Andre-ARM: https://github.com/Andre-ARM +.. _b49020: https://github.com/b49020 diff --git a/plat/socionext/synquacer/platform.mk b/plat/socionext/synquacer/platform.mk new file mode 100644 index 00000000..546f84aa --- /dev/null +++ b/plat/socionext/synquacer/platform.mk @@ -0,0 +1,46 @@ +# +# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. +# +# SPDX-License-Identifier: BSD-3-Clause +# + +override RESET_TO_BL31 := 1 +override ENABLE_PLAT_COMPAT := 0 +override MULTI_CONSOLE_API := 1 +override PROGRAMMABLE_RESET_ADDRESS := 1 +override USE_COHERENT_MEM := 1 +override SEPARATE_CODE_AND_RODATA := 1 +override ENABLE_SVE_FOR_NS := 0 + +# Enable workarounds for selected Cortex-A53 erratas. +ERRATA_A53_855873 := 1 + +# Libraries +include lib/xlat_tables_v2/xlat_tables.mk + +PLAT_PATH := plat/socionext/synquacer +PLAT_INCLUDES := -I$(PLAT_PATH)/include \ + -I$(PLAT_PATH)/drivers/scpi \ + -I$(PLAT_PATH)/drivers/mhu + +PLAT_BL_COMMON_SOURCES += $(PLAT_PATH)/sq_helpers.S \ + drivers/arm/pl011/pl011_console.S \ + drivers/delay_timer/delay_timer.c \ + drivers/delay_timer/generic_delay_timer.c \ + ${XLAT_TABLES_LIB_SRCS} + +BL31_SOURCES += drivers/arm/ccn/ccn.c \ + drivers/arm/gic/common/gic_common.c \ + drivers/arm/gic/v3/gicv3_helpers.c \ + drivers/arm/gic/v3/gicv3_main.c \ + lib/cpus/aarch64/cortex_a53.S \ + plat/common/plat_gicv3.c \ + plat/common/plat_psci_common.c \ + $(PLAT_PATH)/sq_bl31_setup.c \ + $(PLAT_PATH)/sq_ccn.c \ + $(PLAT_PATH)/sq_topology.c \ + $(PLAT_PATH)/sq_psci.c \ + $(PLAT_PATH)/sq_gicv3.c \ + $(PLAT_PATH)/sq_xlat_setup.c \ + $(PLAT_PATH)/drivers/scpi/sq_scpi.c \ + $(PLAT_PATH)/drivers/mhu/sq_mhu.c @@ -182,7 +182,7 @@ This release also contains the following platform support: - QEMU emulator - Raspberry Pi 3 board - RockChip RK3328, RK3368 and RK3399 SoCs -- Socionext UniPhier SoC family +- Socionext UniPhier SoC family and SynQuacer SC2A11 SoCs - Texas Instruments K3 SoCs - Xilinx Zynq UltraScale + MPSoC |