diff options
| -rw-r--r-- | plat/freescale/imx8qm/imx8qm_bl31_setup.c | 7 | ||||
| -rw-r--r-- | plat/freescale/imx8qxp/imx8qxp_bl31_setup.c | 7 |
2 files changed, 10 insertions, 4 deletions
diff --git a/plat/freescale/imx8qm/imx8qm_bl31_setup.c b/plat/freescale/imx8qm/imx8qm_bl31_setup.c index 10e80445..6d354ed7 100644 --- a/plat/freescale/imx8qm/imx8qm_bl31_setup.c +++ b/plat/freescale/imx8qm/imx8qm_bl31_setup.c @@ -251,8 +251,11 @@ void bl31_early_platform_setup(bl31_params_t *from_bl2, /* Enable UART0 clock root */ sc_pm_clock_enable(ipc_handle, SC_R_UART_0, 2, true, false); -#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) \ - | (SC_PAD_28FDSOI_DSE_DV_LOW << PADRING_DSE_SHIFT) | (SC_PAD_28FDSOI_PS_PD << PADRING_PULL_SHIFT)) +#define UART_PAD_CTRL (PADRING_IFMUX_EN_MASK | PADRING_GP_EN_MASK | \ + (SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_LOW << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PD << PADRING_PULL_SHIFT)) /* Configure UART pads */ sc_pad_set(ipc_handle, SC_P_UART0_RX, UART_PAD_CTRL); diff --git a/plat/freescale/imx8qxp/imx8qxp_bl31_setup.c b/plat/freescale/imx8qxp/imx8qxp_bl31_setup.c index 4dff9dca..62d9f318 100644 --- a/plat/freescale/imx8qxp/imx8qxp_bl31_setup.c +++ b/plat/freescale/imx8qxp/imx8qxp_bl31_setup.c @@ -247,8 +247,11 @@ void bl31_early_platform_setup(bl31_params_t *from_bl2, /* Enable UART0 clock root */ sc_pm_clock_enable(ipc_handle, SC_R_UART_0, 2, true, false); -#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) \ - | (SC_PAD_28FDSOI_DSE_DV_LOW << PADRING_DSE_SHIFT) | (SC_PAD_28FDSOI_PS_PD << PADRING_PULL_SHIFT)) +#define UART_PAD_CTRL (PADRING_IFMUX_EN_MASK | PADRING_GP_EN_MASK | \ + (SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_LOW << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PD << PADRING_PULL_SHIFT)) /* Configure UART pads */ sc_pad_set(ipc_handle, SC_P_UART0_RX, UART_PAD_CTRL); |