Merge pull request #1450 from MISL-EBU-System-SW/marvell-support-v6

Marvell support for Armada 8K SoC family

116 files changed, 17487 insertions, 9 deletions

diff --git a/.gitignore b/.gitignore
index 4ece189a..7f8642e3 100644
--- a/.gitignore
+++ b/.gitignore
@@ -18,6 +18,7 @@ tools/cert_create/src/*.o
 tools/cert_create/src/**/*.o
 tools/cert_create/cert_create
 tools/cert_create/cert_create.exe
+tools/doimage/doimage
 
 # GNU GLOBAL files
 GPATH
diff --git a/acknowledgements.rst b/acknowledgements.rst
index 9b81b6c5..5686a580 100644
--- a/acknowledgements.rst
+++ b/acknowledgements.rst
@@ -14,5 +14,7 @@ Xilinx, Inc.
 
 NXP Semiconductors
 
+Marvell International Ltd.
+
 Individuals
 -----------
diff --git a/docs/marvell/build.txt b/docs/marvell/build.txt
new file mode 100644
index 00000000..63a40a8d
--- /dev/null
+++ b/docs/marvell/build.txt
@@ -0,0 +1,181 @@
+TF-A Build Instructions
+======================
+
+This section describes how to compile the ARM Trusted Firmware (TF-A) project for Marvell's platforms.
+
+Build Instructions
+------------------
+(1) Set the cross compiler::
+
+		> export CROSS_COMPILE=/path/to/toolchain/aarch64-linux-gnu-
+
+(2) Set path for FIP images:
+
+	Set U-Boot image path (relatively to TF-A root or absolute path)::
+
+		> export BL33=path/to/u-boot.bin
+
+	For example: if U-Boot project (and its images) is located at ~/project/u-boot,
+	BL33 should be ~/project/u-boot/u-boot.bin
+
+	.. note::
+
+	   u-boot.bin should be used and not u-boot-spl.bin
+
+	Set MSS/SCP image path (mandatory only for Armada80x0 and Aramada8xxy)::
+
+		> export SCP_BL2=path/to/mrvl_scp_bl2*.img
+
+(3) Armada-37x0 build requires WTP tools installation.
+
+	See below in the section "Tools Installation for Armada37x0 Builds".
+	Install ARM 32-bit cross compiler, which is required by building WTMI image for CM3::
+
+		> sudo apt-get install gcc-arm-linux-gnueabi
+
+(4) Clean previous build residuals (if any)::
+
+		> make distclean
+
+(5) Build TF-A:
+
+	There are several build options:
+
+	- DEBUG: default is without debug information (=0). in order to enable it use DEBUG=1
+
+	- LOG_LEVEL: defines the level of logging which will be purged to the default output port.
+
+		LOG_LEVEL_NONE		0
+		LOG_LEVEL_ERROR		10
+		LOG_LEVEL_NOTICE	20
+		LOG_LEVEL_WARNING	30
+		LOG_LEVEL_INFO		40
+		LOG_LEVEL_VERBOSE	50
+
+	- USE_COHERENT_MEM: This flag determines whether to include the coherent memory region in the
+		BL memory map or not.
+
+	-LLC_ENABLE: Flag defining the LLC (L3) cache state. The cache is enabled by default (LLC_ENABLE=1).
+
+	- MARVELL_SECURE_BOOT: build trusted(=1)/non trusted(=0) image, default is non trusted.
+
+	- BLE_PATH:
+		Points to BLE (Binary ROM extension) sources folder. Only required for A8K and A8K+ builds.
+		The parameter is optional, its default value is "ble".
+
+	- MV_DDR_PATH:
+		For A7/8K, use this parameter to point to mv_ddr driver sources to allow BLE build. For A37x0,
+		it is used for ddr_tool build.
+		Usage example: MV_DDR_PATH=path/to/mv_ddr
+		The parameter is optional for A7/8K, when this parameter is not set, the mv_ddr
+		sources are expected to be located at: drivers/marvell/mv_ddr. However, the parameter
+		is necessary for A37x0.
+
+	- DDR_TOPOLOGY: For Armada37x0 only, the DDR topology map index/name, default is 0.
+		Supported Options:
+			- DDR3 1CS (0): DB-88F3720-DDR3-Modular (512MB); EspressoBIN (512MB)
+			- DDR4 1CS (1): DB-88F3720-DDR4-Modular (512MB)
+			- DDR3 2CS (2): EspressoBIN (1GB)
+			- DDR4 2CS (3): DB-88F3720-DDR4-Modular (4GB)
+			- DDR3 1CS (4): DB-88F3720-DDR3-Modular (1GB)
+			- CUSTOMER (CUST): Customer board, DDR3 1CS 512MB
+
+	- CLOCKSPRESET: For Armada37x0 only, the clock tree configuration preset including CPU and DDR frequency,
+		default is CPU_800_DDR_800.
+			- CPU_600_DDR_600	-	CPU at 600 MHz, DDR at 600 MHz
+			- CPU_800_DDR_800	-	CPU at 800 MHz, DDR at 800 MHz
+			- CPU_1000_DDR_800	-	CPU at 1000 MHz, DDR at 800 MHz
+			- CPU_1200_DDR_750	-	CPU at 1200 MHz, DDR at 750 MHz
+
+	- BOOTDEV: For Armada37x0 only, the flash boot device, default is SPINOR,
+			Currently, Armada37x0 only supports SPINOR, SPINAND, EMMCNORM and SATA:
+
+				- SPINOR - SPI NOR flash boot
+				- SPINAND - SPI NAND flash boot
+				- EMMCNORM - eMMC Download Mode
+					Download boot loader or program code from eMMC flash into CM3 or CA53
+					Requires full initialization and command sequence
+				- SATA - SATA device boot
+
+	- PARTNUM: For Armada37x0 only, the boot partition number, default is 0. To boot from eMMC, the value
+		should be aligned with the parameter in U-Boot with name of CONFIG_SYS_MMC_ENV_PART, whose
+		value by default is 1.
+		For details about CONFIG_SYS_MMC_ENV_PART, please refer to the U-Boot build instructions.
+
+	- WTMI_IMG: For Armada37x0 only, the path of the WTMI image can point to an image which does
+		nothing, an image which supports EFUSE or a customized CM3 firmware binary. The default image
+		is wtmi.bin that built from sources in WTP folder, which is the next option. If the default
+		image is OK, then this option should be skipped.
+	- WTP: For Armada37x0 only, use this parameter to point to wtptools source code directory, which
+		can be found as a3700_utils.zip in the release.
+		Usage example: WTP=/path/to/a3700_utils
+
+	- CP_NUM: Total amount of CPs (South Bridge) chips wired to the interconnected APs.
+		When the parameter is omitted, the build is uses the default number of CPs equal to 2.
+		The parameter is valid for Armada 8K-plus SoC family (PLAT=a8xxy) and results in a build of images
+		suitable for a8xxY SoC, where "Y" is a number of connected CPs and "xx" is a number of CPU cores.
+		Valid values with CP_NUM is in a range of 0 to 8.
+		The CPs defined by this parameter are evenly distributed across interconnected APs that in turn
+		are dynamically detected. For instance, if the CP_NUM=6 and the TF-A detects 2 interconnected
+		APs, each AP assumed to have 3 attached CPs. With the same amount of APs and CP_NUM=3, the AP0
+		will have 2 CPs connected and AP1 - a just single CP.
+
+	For example, in order to build the image in debug mode with log level up to 'notice' level run::
+
+		> make DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 PLAT=<MARVELL_PLATFORM> all fip
+
+	And if we want to build a Armada37x0 image in debug mode with log level up to 'notice' level,
+	the image has the preset CPU at 1000 MHz, preset DDR3 at 800 MHz, the DDR topology of DDR3 2CS,
+	the image boot from SPI NOR flash partition 0, and the image is non trusted in WTP, the command
+	line is as following::
+
+		> make DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 SECURE=0 CLOCKSPRESET=CPU_1000_DDR_800 \
+			DDR_TOPOLOGY=2 BOOTDEV=SPINOR PARTNUM=0 PLAT=a3700 all fip
+
+	Supported MARVELL_PLATFORM are:
+		- a3700
+		- a70x0
+		- a70x0_amc (for AMC board)
+		- a70x0_cust (for customers)
+		- a80x0
+		- a80x0_mcbin (for MacciatoBin)
+
+Special Build Flags
+--------------------
+	- PLAT_RECOVERY_IMAGE_ENABLE: When set this option to enable secondary recovery function when build
+		atf. In order to build uart recovery image this operation should be disabled for a70x0 and a80x0
+                because of hardware limitation(boot from secondary image can interrupt uart recovery process).
+		This MACRO definition is set in plat/marvell/a8k/common/include/platform_def.h file
+
+(for more information about build options, please refer to section 'Summary of build options' in  TF-A user-guide:
+ https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/user-guide.md)
+
+
+Build output
+-------------
+Marvell's TF-A compilation generates 7 files:
+	- ble.bin		- BLe image
+	- bl1.bin		- BL1 image
+	- bl2.bin		- BL2 image
+	- bl31.bin		- BL31 image
+	- fip.bin		- FIP image (contains BL2, BL31 & BL33 (U-Boot) images)
+	- boot-image.bin	- TF-A image (contains BL1 and FIP images)
+	- flash-image.bin	- Image which contains boot-image.bin and SPL image; should be placed on the boot flash/device.
+
+
+Tools Installation for Armada37x0 Builds
+-----------------------------------------
+Install a cross GNU ARM tool chain for building the WTMI binary.
+Any cross GNU ARM tool chain that is able to build ARM Cortex M3 binaries
+is suitable.
+
+On Debian/Uboot hosts the default GNU ARM tool chain can be installed
+using the following command::
+
+		> sudo apt-get install gcc-arm-linux-gnueabi
+
+If required, the default tool chain prefix "arm-linux-gnueabi-" can be
+overwritten using the environment variable CROSS_CM3.
+Example for BASH shell::
+
+		> export CROSS_CM3=/opt/arm-cross/bin/arm-linux-gnueabi
diff --git a/docs/marvell/misc/mvebu-a8k-addr-map.txt b/docs/marvell/misc/mvebu-a8k-addr-map.txt
new file mode 100644
index 00000000..586e8b73
--- /dev/null
+++ b/docs/marvell/misc/mvebu-a8k-addr-map.txt
@@ -0,0 +1,47 @@
+Address decoding flow and address translation units of Marvell Armada 8K SoC family
+
++--------------------------------------------------------------------------------------------------+
+|                                                              +-------------+    +--------------+ |
+|                                                              | Memory      +-----   DRAM CS    | |
+|+------------+ +-----------+ +-----------+                    | Controller  |    +--------------+ |
+||  AP DMA    | |           | |           |                    +-------------+                     |
+||  SD/eMMC   | | CA72 CPUs | |  AP MSS   |                    +-------------+                     |
+||  MCI-0/1   | |           | |           |                    | Memory      |                     |
+|+------+-----+ +--+--------+ +--------+--+  +------------+    | Controller  |     +-------------+ |
+|       |          |                   |     |            +----- Translaton  |     |AP           | |
+|       |          |                   |     |            |    +-------------+     |Configuration| |
+|       |          |                   +-----+            +-------------------------Space        | |
+|       |          | +-------------+         |  CCU       |                        +-------------+ |
+|       |          | | MMU         +---------+  Windows   |   +-----------+        +-------------+ |
+|       |          +-| translation |         |  Lookup    +----           +---------   AP SPI    | |
+|       |            +-------------+         |            |   |           |        +-------------+ |
+|       |            +-------------+         |            |   |  IO       |        +-------------+ |
+|       +------------| SMMU        +---------+            |   |  Windows  +---------  AP MCI0/1  | |
+|                    | translation |         +------------+   |  Lookup   |        +-------------+ |
+|                    +---------+---+                          |           |        +-------------+ |
+|             -                |                              |           +---------   AP STM    | |
+|             +-----------------                              |           |        +-------------+ |
+| AP          |                |                              +-+---------+                        |
++---------------------------------------------------------------|----------------------------------+
++-------------|-------------------------------------------------|----------------------------------+
+| CP          |            +-------------+               +------+-----+      +-------------------+ |
+|             |            |             |               |            +-------   SB CFG Space    | |
+|             |            |   DIOB      |               |            |      +-------------------+ |
+|             |            |   Windows   -----------------  IOB       |      +-------------------+ |
+|             |            |   Control   |               |  Windows   +------| SB PCIe-0 - PCIe2 | |
+|             |            |             |               |  Lookup    |      +-------------------+ |
+|             |            +------+------+               |            |      +-------------------+ |
+|             |                   |                      |            +------+      SB NAND      | |
+|             |                   |                      +------+-----+      +-------------------+ |
+|             |                   |                             |                                  |
+|             |                   |                             |                                  |
+|   +------------------+   +------------+                +------+-----+      +-------------------+ |
+|   | Network Engine   |   |            |                |            +-------  SB SPI-0/SPI-1   | |
+|   | Security Engine  |   | PCIe, MSS  |                |  RUNIT     |      +-------------------+ |
+|   | SATA, USB        |   | DMA        |                |  Windows   |      +-------------------+ |
+|   | SD/eMMC          |   |            |                |  Lookup    +-------   SB Device Bus   | |
+|   | TDM, I2C         |   |            |                |            |      +-------------------+ |
+|   +------------------+   +------------+                +------------+                            |
+|                                                                                                  |
++--------------------------------------------------------------------------------------------------+
+
diff --git a/docs/marvell/misc/mvebu-amb.txt b/docs/marvell/misc/mvebu-amb.txt
new file mode 100644
index 00000000..2a7a41ec
--- /dev/null
+++ b/docs/marvell/misc/mvebu-amb.txt
@@ -0,0 +1,45 @@
+AMB - AXI MBUS address decoding
+-------------------------------
+
+AXI to M-bridge decoding unit driver for Marvell Armada 8K and 8K+ SoCs.
+
+- The Runit offers a second level of address windows lookup. It is used to map transaction towards
+the CD BootROM, SPI0, SPI1 and Device bus (NOR).
+- The Runit contains eight configurable windows. Each window defines a contiguous,
+address space and the properties associated with that address space.
+
+Unit		Bank		ATTR
+Device-Bus	DEV_BOOT_CS 	0x2F
+		DEV_CS0     	0x3E
+		DEV_CS1     	0x3D
+		DEV_CS2     	0x3B
+		DEV_CS3     	0x37
+SPI-0		SPI_A_CS0 	0x1E
+		SPI_A_CS1 	0x5E
+		SPI_A_CS2 	0x9E
+		SPI_A_CS3 	0xDE
+		SPI_A_CS4 	0x1F
+		SPI_A_CS5 	0x5F
+		SPI_A_CS6 	0x9F
+		SPI_A_CS7 	0xDF
+SPI1		SPI_B_CS0 	0x1A
+		SPI_B_CS1 	0x5A
+		SPI_B_CS2	0x9A
+		SPI_B_CS3	0xDA
+BOOT_ROM	BOOT_ROM	0x1D
+UART		UART		0x01
+
+Mandatory functions:
+	- marvell_get_amb_memory_map
+		returns the AMB windows configuration and the number of windows
+
+Mandatory structures:
+	amb_memory_map - Array that include the configuration of the windows
+	  every window/entry is a struct which has 2 parameters:
+	  - base address of the window
+	  - Attribute of the window
+
+Examples:
+	struct addr_map_win amb_memory_map[] = {
+		{0xf900,	AMB_DEV_CS0_ID},
+	};
diff --git a/docs/marvell/misc/mvebu-ccu.txt b/docs/marvell/misc/mvebu-ccu.txt
new file mode 100644
index 00000000..97640276
--- /dev/null
+++ b/docs/marvell/misc/mvebu-ccu.txt
@@ -0,0 +1,23 @@
+Marvell CCU address decoding bindings
+=====================================
+
+CCU configration driver (1st stage address translation) for Marvell Armada 8K and 8K+ SoCs.
+
+The CCU node includes a description of the address decoding configuration.
+
+Mandatory functions:
+	- marvell_get_ccu_memory_map
+		return the CCU windows configuration and the number of windows
+		of the specific AP.
+
+Mandatory structures:
+	ccu_memory_map - Array that includes the configuration of the windows
+	  every window/entry is a struct which has 3 parameters:
+	  - Base address of the window
+	  - Size of the window
+	  - Target-ID of the window
+
+Example:
+	struct addr_map_win ccu_memory_map[] = {
+		{0x00000000f2000000,     0x00000000e000000,      IO_0_TID}, /* IO window */
+	};
diff --git a/docs/marvell/misc/mvebu-io-win.txt b/docs/marvell/misc/mvebu-io-win.txt
new file mode 100644
index 00000000..c83ad1fd
--- /dev/null
+++ b/docs/marvell/misc/mvebu-io-win.txt
@@ -0,0 +1,35 @@
+Marvell IO WIN address decoding bindings
+=====================================
+
+IO Window configration driver (2nd stage address translation) for Marvell Armada 8K and 8K+ SoCs.
+
+The IO WIN includes a description of the address decoding configuration.
+
+Transactions that are decoded by CCU windows as IO peripheral, have an additional
+layer of decoding. This additional address decoding layer defines one of the
+following targets:
+	0x0 = BootRom
+	0x1 = STM (Serial Trace Macro-cell, a programmer's port into trace stream)
+	0x2 = SPI direct access
+	0x3 = PCIe registers
+	0x4 = MCI Port
+	0x5 = PCIe port
+
+Mandatory functions:
+	- marvell_get_io_win_memory_map
+		returns the IO windows configuration and the number of windows
+		of the specific AP.
+
+Mandatory structures:
+	io_win_memory_map - Array that include the configuration of the windows
+	  every window/entry is a struct which has 3 parameters:
+	  - Base address of the window
+	  - Size of the window
+	  - Target-ID of the window
+
+Example:
+	struct addr_map_win io_win_memory_map[] = {
+		{0x00000000fe000000,	0x000000001f00000,	PCIE_PORT_TID}, /* PCIe window 31Mb for PCIe port*/
+		{0x00000000ffe00000,	0x000000000100000,	PCIE_REGS_TID}, /* PCI-REG window 64Kb for PCIe-reg*/
+		{0x00000000f6000000,	0x000000000100000,	MCIPHY_TID},	/* MCI window  1Mb for PHY-reg*/
+	};
diff --git a/docs/marvell/misc/mvebu-iob.txt b/docs/marvell/misc/mvebu-iob.txt
new file mode 100644
index 00000000..97ec09d0
--- /dev/null
+++ b/docs/marvell/misc/mvebu-iob.txt
@@ -0,0 +1,40 @@
+Marvell IOB address decoding bindings
+=====================================
+
+IO bridge configration driver (3rd stage address translation) for Marvell Armada 8K and 8K+ SoCs.
+
+The IOB includes a description of the address decoding configuration.
+
+IOB supports up to n (in CP110 n=24) windows for external memory transaction.
+When a transaction passes through the IOB, its address is compared to each of
+the enabled windows. If there is a hit and it passes the security checks, it is
+advanced to the target port.
+
+Mandatory functions:
+	- marvell_get_iob_memory_map
+		returns the IOB windows configuration and the number of windows
+
+Mandatory structures:
+	iob_memory_map - Array that include the configuration of the windows
+	  every window/entry is a struct which has 3 parameters:
+	  - Base address of the window
+	  - Size of the window
+	  - Target-ID of the window
+
+Target ID options:
+	- 0x0 = Internal configuration space
+	- 0x1 = MCI0
+	- 0x2 = PEX1_X1
+	- 0x3 = PEX2_X1
+	- 0x4 = PEX0_X4
+	- 0x5 = NAND flash
+	- 0x6 = RUNIT (NOR/SPI/BootRoom)
+	- 0x7 = MCI1
+
+Example:
+	struct addr_map_win iob_memory_map[] = {
+		{0x00000000f7000000,	0x0000000001000000,	PEX1_TID}, /* PEX1_X1 window */
+		{0x00000000f8000000,	0x0000000001000000,	PEX2_TID}, /* PEX2_X1 window */
+		{0x00000000f6000000,	0x0000000001000000,	PEX0_TID}, /* PEX0_X4 window */
+		{0x00000000f9000000,	0x0000000001000000,	NAND_TID}  /* NAND window */
+	};
diff --git a/docs/marvell/porting.txt b/docs/marvell/porting.txt
new file mode 100644
index 00000000..78000e91
--- /dev/null
+++ b/docs/marvell/porting.txt
@@ -0,0 +1,66 @@
+TF-A Porting Guide
+=================
+
+This section describes how to port TF-A to a customer board, assuming that the SoC being used is already supported
+in TF-A.
+
+
+Source Code Structure
+---------------------
+- The customer platform specific code shall reside under "plat/marvell/<soc family>/<soc>_cust"
+	(e.g. 'plat/marvell/a8k/a7040_cust').
+- The platform name for build purposes is called "<soc>_cust" (e.g. a7040_cust).
+- The build system will reuse all files from within the soc directory, and take only the porting
+  files from the customer platform directory.
+
+Files that require porting are located at "plat/marvell/<soc family>/<soc>_cust" directory.
+
+
+Armada-70x0/Armada-80x0 Porting
+-------------------------------
+
+  - SoC Physical Address Map (marvell_plat_config.c):
+	- This file describes the SoC physical memory mapping to be used for the CCU, IOWIN, AXI-MBUS and IOB
+	  address decode units (Refer to the functional spec for more details).
+	- In most cases, using the default address decode windows should work OK.
+	- In cases where a special physical address map is needed (e.g. Special size for PCIe MEM windows,
+	  large memory mapped SPI flash...), then porting of the SoC memory map is required.
+	- Note: For a detailed information on how CCU, IOWIN, AXI-MBUS & IOB work, please refer to the SoC functional spec,
+	  and under "docs/marvell/misc/mvebu-[ccu/iob/amb/io-win].txt" files.
+
+  - boot loader recovery (marvell_plat_config.c):
+	- Background:
+		boot rom can skip the current image and choose to boot from next position if a specific value
+		(0xDEADB002) is returned by the ble main function. This feature is used for boot loader recovery
+		by booting from a valid flash-image saved in next position on flash (e.g. address 2M in SPI flash).
+
+		Supported options to implement the skip request are:
+			- GPIO
+			- I2C
+			- User defined
+
+	- Porting:
+		Under marvell_plat_config.c, implement struct skip_image that includes specific board parameters.
+		.. warning:: to disable this feature make sure the struct skip_image is not implemented.
+
+	- Example:
+		In A7040-DB specific implementation (plat/marvell/a8k/a70x0/board/marvell_plat_config.c),
+		the image skip is implemented using GPIO: mpp 33 (SW5).
+
+		Before resetting the board make sure there is a valid image on the next flash address:
+			-tftp [valid address] flash-image.bin
+			-sf update [valid address] 0x2000000 [size]
+
+		Press reset and keep pressing the button connected to the chosen GPIO pin. A skip image request
+		message is printed on the screen and boot rom boots from the saved image at the next position.
+
+  - DDR Porting (dram_port.c):
+	- This file defines the dram topology and parameters of the target board.
+	- The DDR code is part of the BLE component, which is an extension of ARM Trusted Firmware (TF-A).
+	- The DDR driver called mv_ddr is released separately apart from TF-A sources.
+	- The BLE and consequently, the DDR init code is executed at the early stage of the boot process.
+	- Each supported platform of the TF-A has its own DDR porting file called dram_port.c located at
+	  ``atf/plat/marvell/a8k/<platform>/board`` directory.
+	- Please refer to '<path_to_mv_ddr_sources>/doc/porting_guide.txt' for detailed porting description.
+	- The build target directory is "build/<platform>/release/ble".
+
diff --git a/drivers/io/io_fip.c b/drivers/io/io_fip.c
index 6e7103db..9d6c763e 100644
--- a/drivers/io/io_fip.c
+++ b/drivers/io/io_fip.c
@@ -372,7 +372,6 @@ static int fip_file_read(io_entity_t *entity, uintptr_t buffer, size_t length,
 	uintptr_t backend_handle;
 
 	assert(entity != NULL);
-	assert(buffer != (uintptr_t)NULL);
 	assert(length_read != NULL);
 	assert(entity->info != (uintptr_t)NULL);
 
diff --git a/drivers/io/io_memmap.c b/drivers/io/io_memmap.c
index bf59d6a5..5595e60a 100644
--- a/drivers/io/io_memmap.c
+++ b/drivers/io/io_memmap.c
@@ -9,6 +9,7 @@
 #include <io_driver.h>
 #include <io_memmap.h>
 #include <io_storage.h>
+#include <platform_def.h>
 #include <string.h>
 #include <utils.h>
 
@@ -169,7 +170,6 @@ static int memmap_block_read(io_entity_t *entity, uintptr_t buffer,
 	size_t pos_after;
 
 	assert(entity != NULL);
-	assert(buffer != (uintptr_t)NULL);
 	assert(length_read != NULL);
 
 	fp = (file_state_t *) entity->info;
@@ -197,7 +197,6 @@ static int memmap_block_write(io_entity_t *entity, const uintptr_t buffer,
 	size_t pos_after;
 
 	assert(entity != NULL);
-	assert(buffer != (uintptr_t)NULL);
 	assert(length_written != NULL);
 
 	fp = (file_state_t *) entity->info;
diff --git a/drivers/io/io_semihosting.c b/drivers/io/io_semihosting.c
index 4abf44f7..9ca0a9dc 100644
--- a/drivers/io/io_semihosting.c
+++ b/drivers/io/io_semihosting.c
@@ -8,6 +8,7 @@
 #include <io_driver.h>
 #include <io_semihosting.h>
 #include <io_storage.h>
+#include <platform_def.h>
 #include <semihosting.h>
 
 
@@ -133,7 +134,6 @@ static int sh_file_read(io_entity_t *entity, uintptr_t buffer, size_t length,
 	long file_handle;
 
 	assert(entity != NULL);
-	assert(buffer != (uintptr_t)NULL);
 	assert(length_read != NULL);
 
 	file_handle = (long)entity->info;
@@ -158,7 +158,6 @@ static int sh_file_write(io_entity_t *entity, const uintptr_t buffer,
 	size_t bytes = length;
 
 	assert(entity != NULL);
-	assert(buffer != (uintptr_t)NULL);
 	assert(length_written != NULL);
 
 	file_handle = (long)entity->info;
diff --git a/drivers/io/io_storage.c b/drivers/io/io_storage.c
index 0918de0a..948f8481 100644
--- a/drivers/io/io_storage.c
+++ b/drivers/io/io_storage.c
@@ -279,7 +279,7 @@ int io_read(uintptr_t handle,
 		size_t *length_read)
 {
 	int result = -ENODEV;
-	assert(is_valid_entity(handle) && (buffer != (uintptr_t)NULL));
+	assert(is_valid_entity(handle));
 
 	io_entity_t *entity = (io_entity_t *)handle;
 
@@ -299,7 +299,7 @@ int io_write(uintptr_t handle,
 		size_t *length_written)
 {
 	int result = -ENODEV;
-	assert(is_valid_entity(handle) && (buffer != (uintptr_t)NULL));
+	assert(is_valid_entity(handle));
 
 	io_entity_t *entity = (io_entity_t *)handle;
 
diff --git a/drivers/marvell/amb_adec.c b/drivers/marvell/amb_adec.c
new file mode 100644
index 00000000..06a1957e
--- /dev/null
+++ b/drivers/marvell/amb_adec.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* AXI to M-Bridge decoding unit driver for Marvell Armada 8K and 8K+ SoCs */
+
+#include <a8k_common.h>
+#include <debug.h>
+#include <mmio.h>
+#include <mvebu.h>
+#include <mvebu_def.h>
+
+#if LOG_LEVEL >= LOG_LEVEL_INFO
+#define DEBUG_ADDR_MAP
+#endif
+
+/* common defines */
+#define WIN_ENABLE_BIT			(0x1)
+
+#define MVEBU_AMB_ADEC_OFFSET		(0x70ff00)
+
+#define AMB_WIN_CR_OFFSET(win)		(amb_base + 0x0 + (0x8 * win))
+#define AMB_ATTR_OFFSET			8
+#define AMB_ATTR_MASK			0xFF
+#define AMB_SIZE_OFFSET			16
+#define AMB_SIZE_MASK			0xFF
+
+#define AMB_WIN_BASE_OFFSET(win)	(amb_base + 0x4 + (0x8 * win))
+#define AMB_BASE_OFFSET			16
+#define AMB_BASE_ADDR_MASK		((1 << (32 - AMB_BASE_OFFSET)) - 1)
+
+#define AMB_WIN_ALIGNMENT_64K		(0x10000)
+#define AMB_WIN_ALIGNMENT_1M		(0x100000)
+
+uintptr_t amb_base;
+
+static void amb_check_win(struct addr_map_win *win, uint32_t win_num)
+{
+	uint32_t base_addr;
+
+	/* make sure the base address is in 16-bit range */
+	if (win->base_addr > AMB_BASE_ADDR_MASK) {
+		WARN("Window %d: base address is too big 0x%llx\n",
+		       win_num, win->base_addr);
+		win->base_addr = AMB_BASE_ADDR_MASK;
+		WARN("Set the base address to 0x%llx\n", win->base_addr);
+	}
+
+	base_addr  = win->base_addr << AMB_BASE_OFFSET;
+	/* for AMB The base is always 1M aligned */
+	/* check if address is aligned to 1M */
+	if (IS_NOT_ALIGN(base_addr, AMB_WIN_ALIGNMENT_1M)) {
+		win->base_addr = ALIGN_UP(base_addr, AMB_WIN_ALIGNMENT_1M);
+		WARN("Window %d: base address unaligned to 0x%x\n",
+		       win_num, AMB_WIN_ALIGNMENT_1M);
+		WARN("Align up the base address to 0x%llx\n", win->base_addr);
+	}
+
+	/* size parameter validity check */
+	if (!IS_POWER_OF_2(win->win_size)) {
+		WARN("Window %d: window size is not power of 2 (0x%llx)\n",
+		       win_num, win->win_size);
+		win->win_size = ROUND_UP_TO_POW_OF_2(win->win_size);
+		WARN("Rounding size to 0x%llx\n", win->win_size);
+	}
+}
+
+static void amb_enable_win(struct addr_map_win *win, uint32_t win_num)
+{
+	uint32_t ctrl, base, size;
+
+	/*
+	 * size is 64KB granularity.
+	 * The number of ones specifies the size of the
+	 * window in 64 KB granularity. 0 is 64KB
+	 */
+	size = (win->win_size / AMB_WIN_ALIGNMENT_64K) - 1;
+	ctrl = (size << AMB_SIZE_OFFSET) | (win->target_id << AMB_ATTR_OFFSET);
+	base = win->base_addr << AMB_BASE_OFFSET;
+
+	mmio_write_32(AMB_WIN_BASE_OFFSET(win_num), base);
+	mmio_write_32(AMB_WIN_CR_OFFSET(win_num), ctrl);
+
+	/* enable window after configuring window size (and attributes) */
+	ctrl |= WIN_ENABLE_BIT;
+	mmio_write_32(AMB_WIN_CR_OFFSET(win_num), ctrl);
+}
+
+#ifdef DEBUG_ADDR_MAP
+static void dump_amb_adec(void)
+{
+	uint32_t ctrl, base, win_id, attr;
+	uint32_t size, size_count;
+
+	/* Dump all AMB windows */
+	tf_printf("bank  attribute     base          size\n");
+	tf_printf("--------------------------------------------\n");
+	for (win_id = 0; win_id < AMB_MAX_WIN_ID; win_id++) {
+		ctrl = mmio_read_32(AMB_WIN_CR_OFFSET(win_id));
+		if (ctrl & WIN_ENABLE_BIT) {
+			base = mmio_read_32(AMB_WIN_BASE_OFFSET(win_id));
+			attr = (ctrl >> AMB_ATTR_OFFSET) & AMB_ATTR_MASK;
+			size_count = (ctrl >> AMB_SIZE_OFFSET) & AMB_SIZE_MASK;
+			size = (size_count + 1) * AMB_WIN_ALIGNMENT_64K;
+			tf_printf("amb   0x%04x        0x%08x    0x%08x\n",
+				  attr, base, size);
+		}
+	}
+}
+#endif
+
+int init_amb_adec(uintptr_t base)
+{
+	struct addr_map_win *win;
+	uint32_t win_id, win_reg;
+	uint32_t win_count;
+
+	INFO("Initializing AXI to MBus Bridge Address decoding\n");
+
+	/* Get the base address of the AMB address decoding */
+	amb_base = base + MVEBU_AMB_ADEC_OFFSET;
+
+	/* Get the array of the windows and its size */
+	marvell_get_amb_memory_map(&win, &win_count, base);
+	if (win_count <= 0)
+		INFO("no windows configurations found\n");
+
+	if (win_count > AMB_MAX_WIN_ID) {
+		INFO("number of windows is bigger than %d\n", AMB_MAX_WIN_ID);
+		return 0;
+	}
+
+	/* disable all AMB windows */
+	for (win_id = 0; win_id < AMB_MAX_WIN_ID; win_id++) {
+		win_reg = mmio_read_32(AMB_WIN_CR_OFFSET(win_id));
+		win_reg &= ~WIN_ENABLE_BIT;
+		mmio_write_32(AMB_WIN_CR_OFFSET(win_id), win_reg);
+	}
+
+	/* enable relevant windows */
+	for (win_id = 0; win_id < win_count; win_id++, win++) {
+		amb_check_win(win, win_id);
+		amb_enable_win(win, win_id);
+	}
+
+#ifdef DEBUG_ADDR_MAP
+	dump_amb_adec();
+#endif
+
+	INFO("Done AXI to MBus Bridge Address decoding Initializing\n");
+
+	return 0;
+}
diff --git a/drivers/marvell/cache_llc.c b/drivers/marvell/cache_llc.c
new file mode 100644
index 00000000..e13e6ce2
--- /dev/null
+++ b/drivers/marvell/cache_llc.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* LLC driver is the Last Level Cache (L3C) driver
+ * for Marvell SoCs in AP806, AP807, and AP810
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <cache_llc.h>
+#include <ccu.h>
+#include <mmio.h>
+#include <mvebu_def.h>
+
+#define CCU_HTC_CR(ap_index)		(MVEBU_CCU_BASE(ap_index) + 0x200)
+#define CCU_SET_POC_OFFSET		5
+
+extern void ca72_l2_enable_unique_clean(void);
+
+void llc_cache_sync(int ap_index)
+{
+	mmio_write_32(LLC_SYNC(ap_index), 0);
+	/* Atomic write, no need to wait */
+}
+
+void llc_flush_all(int ap_index)
+{
+	mmio_write_32(L2X0_CLEAN_INV_WAY(ap_index), LLC_WAY_MASK);
+	llc_cache_sync(ap_index);
+}
+
+void llc_clean_all(int ap_index)
+{
+	mmio_write_32(L2X0_CLEAN_WAY(ap_index), LLC_WAY_MASK);
+	llc_cache_sync(ap_index);
+}
+
+void llc_inv_all(int ap_index)
+{
+	mmio_write_32(L2X0_INV_WAY(ap_index), LLC_WAY_MASK);
+	llc_cache_sync(ap_index);
+}
+
+void llc_disable(int ap_index)
+{
+	llc_flush_all(ap_index);
+	mmio_write_32(LLC_CTRL(ap_index), 0);
+	dsbishst();
+}
+
+void llc_enable(int ap_index, int excl_mode)
+{
+	uint32_t val;
+
+	dsbsy();
+	llc_inv_all(ap_index);
+	dsbsy();
+
+	val = LLC_CTRL_EN;
+	if (excl_mode)
+		val |= LLC_EXCLUSIVE_EN;
+
+	mmio_write_32(LLC_CTRL(ap_index), val);
+	dsbsy();
+}
+
+int llc_is_exclusive(int ap_index)
+{
+	uint32_t reg;
+
+	reg = mmio_read_32(LLC_CTRL(ap_index));
+
+	if ((reg & (LLC_CTRL_EN | LLC_EXCLUSIVE_EN)) ==
+		   (LLC_CTRL_EN | LLC_EXCLUSIVE_EN))
+		return 1;
+
+	return 0;
+}
+
+void llc_runtime_enable(int ap_index)
+{
+	uint32_t reg;
+
+	reg = mmio_read_32(LLC_CTRL(ap_index));
+	if (reg & LLC_CTRL_EN)
+		return;
+
+	INFO("Enabling LLC\n");
+
+	/*
+	 * Enable L2 UniqueClean evictions with data
+	 *  Note: this configuration assumes that LLC is configured
+	 *	  in exclusive mode.
+	 *	  Later on in the code this assumption will be validated
+	 */
+	ca72_l2_enable_unique_clean();
+	llc_enable(ap_index, 1);
+
+	/* Set point of coherency to DDR.
+	 * This is required by units which have SW cache coherency
+	 */
+	reg = mmio_read_32(CCU_HTC_CR(ap_index));
+	reg |= (0x1 << CCU_SET_POC_OFFSET);
+	mmio_write_32(CCU_HTC_CR(ap_index), reg);
+}
diff --git a/drivers/marvell/ccu.c b/drivers/marvell/ccu.c
new file mode 100644
index 00000000..e478d63a
--- /dev/null
+++ b/drivers/marvell/ccu.c
@@ -0,0 +1,361 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* CCU unit device driver for Marvell AP807, AP807 and AP810 SoCs */
+
+#include <a8k_common.h>
+#include <ccu.h>
+#include <debug.h>
+#include <mmio.h>
+#include <mvebu.h>
+#include <mvebu_def.h>
+
+#if LOG_LEVEL >= LOG_LEVEL_INFO
+#define DEBUG_ADDR_MAP
+#endif
+
+/* common defines */
+#define WIN_ENABLE_BIT			(0x1)
+/* Physical address of the base of the window = {AddrLow[19:0],20’h0} */
+#define ADDRESS_SHIFT			(20 - 4)
+#define ADDRESS_MASK			(0xFFFFFFF0)
+#define CCU_WIN_ALIGNMENT		(0x100000)
+
+#define IS_DRAM_TARGET(tgt)		((((tgt) == DRAM_0_TID) || \
+					((tgt) == DRAM_1_TID) || \
+					((tgt) == RAR_TID)) ? 1 : 0)
+
+/* For storage of CR, SCR, ALR, AHR abd GCR */
+static uint32_t ccu_regs_save[MVEBU_CCU_MAX_WINS * 4 + 1];
+
+#ifdef DEBUG_ADDR_MAP
+static void dump_ccu(int ap_index)
+{
+	uint32_t win_id, win_cr, alr, ahr;
+	uint8_t target_id;
+	uint64_t start, end;
+
+	/* Dump all AP windows */
+	tf_printf("\tbank  target     start              end\n");
+	tf_printf("\t----------------------------------------------------\n");
+	for (win_id = 0; win_id < MVEBU_CCU_MAX_WINS; win_id++) {
+		win_cr = mmio_read_32(CCU_WIN_CR_OFFSET(ap_index, win_id));
+		if (win_cr & WIN_ENABLE_BIT) {
+			target_id = (win_cr >> CCU_TARGET_ID_OFFSET) &
+				     CCU_TARGET_ID_MASK;
+			alr = mmio_read_32(CCU_WIN_ALR_OFFSET(ap_index,
+							      win_id));
+			ahr = mmio_read_32(CCU_WIN_AHR_OFFSET(ap_index,
+							      win_id));
+			start = ((uint64_t)alr << ADDRESS_SHIFT);
+			end = (((uint64_t)ahr + 0x10) << ADDRESS_SHIFT);
+			tf_printf("\tccu    %02x     0x%016llx 0x%016llx\n",
+				  target_id, start, end);
+		}
+	}
+	win_cr = mmio_read_32(CCU_WIN_GCR_OFFSET(ap_index));
+	target_id = (win_cr >> CCU_GCR_TARGET_OFFSET) & CCU_GCR_TARGET_MASK;
+	tf_printf("\tccu   GCR %d - all other transactions\n", target_id);
+}
+#endif
+
+void ccu_win_check(struct addr_map_win *win)
+{
+	/* check if address is aligned to 1M */
+	if (IS_NOT_ALIGN(win->base_addr, CCU_WIN_ALIGNMENT)) {
+		win->base_addr = ALIGN_UP(win->base_addr, CCU_WIN_ALIGNMENT);
+		NOTICE("%s: Align up the base address to 0x%llx\n",
+		       __func__, win->base_addr);
+	}
+
+	/* size parameter validity check */
+	if (IS_NOT_ALIGN(win->win_size, CCU_WIN_ALIGNMENT)) {
+		win->win_size = ALIGN_UP(win->win_size, CCU_WIN_ALIGNMENT);
+		NOTICE("%s: Aligning size to 0x%llx\n",
+		       __func__, win->win_size);
+	}
+}
+
+void ccu_enable_win(int ap_index, struct addr_map_win *win, uint32_t win_id)
+{
+	uint32_t ccu_win_reg;
+	uint32_t alr, ahr;
+	uint64_t end_addr;
+
+	if ((win_id == 0) || (win_id > MVEBU_CCU_MAX_WINS)) {
+		ERROR("Enabling wrong CCU window %d!\n", win_id);
+		return;
+	}
+
+	end_addr = (win->base_addr + win->win_size - 1);
+	alr = (uint32_t)((win->base_addr >> ADDRESS_SHIFT) & ADDRESS_MASK);
+	ahr = (uint32_t)((end_addr >> ADDRESS_SHIFT) & ADDRESS_MASK);
+
+	mmio_write_32(CCU_WIN_ALR_OFFSET(ap_index, win_id), alr);
+	mmio_write_32(CCU_WIN_AHR_OFFSET(ap_index, win_id), ahr);
+
+	ccu_win_reg = WIN_ENABLE_BIT;
+	ccu_win_reg |= (win->target_id & CCU_TARGET_ID_MASK)
+			<< CCU_TARGET_ID_OFFSET;
+	mmio_write_32(CCU_WIN_CR_OFFSET(ap_index, win_id), ccu_win_reg);
+}
+
+static void ccu_disable_win(int ap_index, uint32_t win_id)
+{
+	uint32_t win_reg;
+
+	if ((win_id == 0) || (win_id > MVEBU_CCU_MAX_WINS)) {
+		ERROR("Disabling wrong CCU window %d!\n", win_id);
+		return;
+	}
+
+	win_reg = mmio_read_32(CCU_WIN_CR_OFFSET(ap_index, win_id));
+	win_reg &= ~WIN_ENABLE_BIT;
+	mmio_write_32(CCU_WIN_CR_OFFSET(ap_index, win_id), win_reg);
+}
+
+/* Insert/Remove temporary window for using the out-of reset default
+ * CPx base address to access the CP configuration space prior to
+ * the further base address update in accordance with address mapping
+ * design.
+ *
+ * NOTE: Use the same window array for insertion and removal of
+ *       temporary windows.
+ */
+void ccu_temp_win_insert(int ap_index, struct addr_map_win *win, int size)
+{
+	uint32_t win_id;
+
+	for (int i = 0; i < size; i++) {
+		win_id = MVEBU_CCU_MAX_WINS - 1 - i;
+		ccu_win_check(win);
+		ccu_enable_win(ap_index, win, win_id);
+		win++;
+	}
+}
+
+/*
+ * NOTE: Use the same window array for insertion and removal of
+ *       temporary windows.
+ */
+void ccu_temp_win_remove(int ap_index, struct addr_map_win *win, int size)
+{
+	uint32_t win_id;
+
+	for (int i = 0; i < size; i++) {
+		uint64_t base;
+		uint32_t target;
+
+		win_id = MVEBU_CCU_MAX_WINS - 1 - i;
+
+		target = mmio_read_32(CCU_WIN_CR_OFFSET(ap_index, win_id));
+		target >>= CCU_TARGET_ID_OFFSET;
+		target &= CCU_TARGET_ID_MASK;
+
+		base = mmio_read_32(CCU_WIN_ALR_OFFSET(ap_index, win_id));
+		base <<= ADDRESS_SHIFT;
+
+		if ((win->target_id != target) || (win->base_addr != base)) {
+			ERROR("%s: Trying to remove bad window-%d!\n",
+			      __func__, win_id);
+			continue;
+		}
+		ccu_disable_win(ap_index, win_id);
+		win++;
+	}
+}
+
+/* Returns current DRAM window target (DRAM_0_TID, DRAM_1_TID, RAR_TID)
+ * NOTE: Call only once for each AP.
+ * The AP0 DRAM window is located at index 2 only at the BL31 execution start.
+ * Then it relocated to index 1 for matching the rest of APs DRAM settings.
+ * Calling this function after relocation will produce wrong results on AP0
+ */
+static uint32_t ccu_dram_target_get(int ap_index)
+{
+	/* On BLE stage the AP0 DRAM window is opened by the BootROM at index 2.
+	 * All the rest of detected APs will use window at index 1.
+	 * The AP0 DRAM window is moved from index 2 to 1 during
+	 * init_ccu() execution.
+	 */
+	const uint32_t win_id = (ap_index == 0) ? 2 : 1;
+	uint32_t target;
+
+	target = mmio_read_32(CCU_WIN_CR_OFFSET(ap_index, win_id));
+	target >>= CCU_TARGET_ID_OFFSET;
+	target &= CCU_TARGET_ID_MASK;
+
+	return target;
+}
+
+void ccu_dram_target_set(int ap_index, uint32_t target)
+{
+	/* On BLE stage the AP0 DRAM window is opened by the BootROM at index 2.
+	 * All the rest of detected APs will use window at index 1.
+	 * The AP0 DRAM window is moved from index 2 to 1
+	 * during init_ccu() execution.
+	 */
+	const uint32_t win_id = (ap_index == 0) ? 2 : 1;
+	uint32_t dram_cr;
+
+	dram_cr = mmio_read_32(CCU_WIN_CR_OFFSET(ap_index, win_id));
+	dram_cr &= ~(CCU_TARGET_ID_MASK << CCU_TARGET_ID_OFFSET);
+	dram_cr |= (target & CCU_TARGET_ID_MASK) << CCU_TARGET_ID_OFFSET;
+	mmio_write_32(CCU_WIN_CR_OFFSET(ap_index, win_id), dram_cr);
+}
+
+/* Setup CCU DRAM window and enable it */
+void ccu_dram_win_config(int ap_index, struct addr_map_win *win)
+{
+#if IMAGE_BLE /* BLE */
+	/* On BLE stage the AP0 DRAM window is opened by the BootROM at index 2.
+	 * Since the BootROM is not accessing DRAM at BLE stage,
+	 * the DRAM window can be temporarely disabled.
+	 */
+	const uint32_t win_id = (ap_index == 0) ? 2 : 1;
+#else /* end of BLE */
+	/* At the ccu_init() execution stage, DRAM windows of all APs
+	 * are arranged at index 1.
+	 * The AP0 still has the old window BootROM DRAM at index 2, so
+	 * the window-1 can be safely disabled without breaking the DRAM access.
+	 */
+	const uint32_t win_id = 1;
+#endif
+
+	ccu_disable_win(ap_index, win_id);
+	/* enable write secure (and clear read secure) */
+	mmio_write_32(CCU_WIN_SCR_OFFSET(ap_index, win_id),
+		      CCU_WIN_ENA_WRITE_SECURE);
+	ccu_win_check(win);
+	ccu_enable_win(ap_index, win, win_id);
+}
+
+/* Save content of CCU window + GCR */
+static void ccu_save_win_range(int ap_id, int win_first,
+			       int win_last, uint32_t *buffer)
+{
+	int win_id, idx;
+	/* Save CCU */
+	for (idx = 0, win_id = win_first; win_id <= win_last; win_id++) {
+		buffer[idx++] = mmio_read_32(CCU_WIN_CR_OFFSET(ap_id, win_id));
+		buffer[idx++] = mmio_read_32(CCU_WIN_SCR_OFFSET(ap_id, win_id));
+		buffer[idx++] = mmio_read_32(CCU_WIN_ALR_OFFSET(ap_id, win_id));
+		buffer[idx++] = mmio_read_32(CCU_WIN_AHR_OFFSET(ap_id, win_id));
+	}
+	buffer[idx] = mmio_read_32(CCU_WIN_GCR_OFFSET(ap_id));
+}
+
+/* Restore content of CCU window + GCR */
+static void ccu_restore_win_range(int ap_id, int win_first,
+				  int win_last, uint32_t *buffer)
+{
+	int win_id, idx;
+	/* Restore CCU */
+	for (idx = 0, win_id = win_first; win_id <= win_last; win_id++) {
+		mmio_write_32(CCU_WIN_CR_OFFSET(ap_id, win_id),  buffer[idx++]);
+		mmio_write_32(CCU_WIN_SCR_OFFSET(ap_id, win_id), buffer[idx++]);
+		mmio_write_32(CCU_WIN_ALR_OFFSET(ap_id, win_id), buffer[idx++]);
+		mmio_write_32(CCU_WIN_AHR_OFFSET(ap_id, win_id), buffer[idx++]);
+	}
+	mmio_write_32(CCU_WIN_GCR_OFFSET(ap_id), buffer[idx]);
+}
+
+void ccu_save_win_all(int ap_id)
+{
+	ccu_save_win_range(ap_id, 0, MVEBU_CCU_MAX_WINS - 1, ccu_regs_save);
+}
+
+void ccu_restore_win_all(int ap_id)
+{
+	ccu_restore_win_range(ap_id, 0, MVEBU_CCU_MAX_WINS - 1, ccu_regs_save);
+}
+
+int init_ccu(int ap_index)
+{
+	struct addr_map_win *win, *dram_win;
+	uint32_t win_id, win_reg;
+	uint32_t win_count, array_id;
+	uint32_t dram_target;
+#if IMAGE_BLE
+	/* In BootROM context CCU Window-1
+	 * has SRAM_TID target and should not be disabled
+	 */
+	const uint32_t win_start = 2;
+#else
+	const uint32_t win_start = 1;
+#endif
+
+	INFO("Initializing CCU Address decoding\n");
+
+	/* Get the array of the windows and fill the map data */
+	marvell_get_ccu_memory_map(ap_index, &win, &win_count);
+	if (win_count <= 0) {
+		INFO("No windows configurations found\n");
+	} else if (win_count > (MVEBU_CCU_MAX_WINS - 1)) {
+		ERROR("CCU mem map array > than max available windows (%d)\n",
+		      MVEBU_CCU_MAX_WINS);
+		win_count = MVEBU_CCU_MAX_WINS;
+	}
+
+	/* Need to set GCR to DRAM before all CCU windows are disabled for
+	 * securing the normal access to DRAM location, which the ATF is running
+	 * from. Once all CCU windows are set, which have to include the
+	 * dedicated DRAM window as well, the GCR can be switched to the target
+	 * defined by the platform configuration.
+	 */
+	dram_target = ccu_dram_target_get(ap_index);
+	win_reg = (dram_target & CCU_GCR_TARGET_MASK) << CCU_GCR_TARGET_OFFSET;
+	mmio_write_32(CCU_WIN_GCR_OFFSET(ap_index), win_reg);
+
+	/* If the DRAM window was already configured at the BLE stage,
+	 * only the window target considered valid, the address range should be
+	 * updated according to the platform configuration.
+	 */
+	for (dram_win = win, array_id = 0; array_id < win_count;
+	     array_id++, dram_win++) {
+		if (IS_DRAM_TARGET(dram_win->target_id)) {
+			dram_win->target_id = dram_target;
+			break;
+		}
+	}
+
+	/* Disable all AP CCU windows
+	 * Window-0 is always bypassed since it already contains
+	 * data allowing the internal configuration space access
+	 */
+	for (win_id = win_start; win_id < MVEBU_CCU_MAX_WINS; win_id++) {
+		ccu_disable_win(ap_index, win_id);
+		/* enable write secure (and clear read secure) */
+		mmio_write_32(CCU_WIN_SCR_OFFSET(ap_index, win_id),
+			      CCU_WIN_ENA_WRITE_SECURE);
+	}
+
+	/* win_id is the index of the current ccu window
+	 * array_id is the index of the current memory map window entry
+	 */
+	for (win_id = win_start, array_id = 0;
+	    ((win_id < MVEBU_CCU_MAX_WINS) && (array_id < win_count));
+	    win_id++) {
+		ccu_win_check(win);
+		ccu_enable_win(ap_index, win, win_id);
+		win++;
+		array_id++;
+	}
+
+	/* Get & set the default target according to board topology */
+	win_reg = (marvell_get_ccu_gcr_target(ap_index) & CCU_GCR_TARGET_MASK)
+		   << CCU_GCR_TARGET_OFFSET;
+	mmio_write_32(CCU_WIN_GCR_OFFSET(ap_index), win_reg);
+
+#ifdef DEBUG_ADDR_MAP
+	dump_ccu(ap_index);
+#endif
+
+	INFO("Done CCU Address decoding Initializing\n");
+
+	return 0;
+}
diff --git a/drivers/marvell/comphy.h b/drivers/marvell/comphy.h
new file mode 100644
index 00000000..788b1b60
--- /dev/null
+++ b/drivers/marvell/comphy.h
@@ -0,0 +1,473 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Driver for COMPHY unit that is part or Marvell A8K SoCs */
+
+#ifndef _COMPHY_H_
+#define _COMPHY_H_
+
+/* COMPHY registers */
+#define COMMON_PHY_CFG1_REG			0x0
+#define COMMON_PHY_CFG1_PWR_UP_OFFSET		1
+#define COMMON_PHY_CFG1_PWR_UP_MASK		\
+				(0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET)
+#define COMMON_PHY_CFG1_PIPE_SELECT_OFFSET	2
+#define COMMON_PHY_CFG1_PIPE_SELECT_MASK	\
+				(0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET)
+#define COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET	13
+#define COMMON_PHY_CFG1_PWR_ON_RESET_MASK	\
+				(0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET)
+#define COMMON_PHY_CFG1_CORE_RSTN_OFFSET	14
+#define COMMON_PHY_CFG1_CORE_RSTN_MASK		\
+				(0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET)
+#define COMMON_PHY_PHY_MODE_OFFSET		15
+#define COMMON_PHY_PHY_MODE_MASK		\
+				(0x1 << COMMON_PHY_PHY_MODE_OFFSET)
+
+#define COMMON_SELECTOR_PHY_OFFSET			0x140
+#define COMMON_SELECTOR_PIPE_OFFSET			0x144
+
+#define COMMON_PHY_SD_CTRL1				0x148
+#define COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_OFFSET	0
+#define COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_MASK	0xFFFF
+#define COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET		24
+#define COMMON_PHY_SD_CTRL1_PCIE_X4_EN_MASK		\
+				(0x1 << COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET)
+#define COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET		25
+#define COMMON_PHY_SD_CTRL1_PCIE_X2_EN_MASK		\
+				(0x1 << COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET)
+
+#define DFX_DEV_GEN_CTRL12			0x80
+#define DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET		7
+#define DFX_DEV_GEN_PCIE_CLK_SRC_MASK		\
+				(0x3 << DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET)
+
+/* HPIPE register */
+#define HPIPE_PWR_PLL_REG			0x4
+#define HPIPE_PWR_PLL_REF_FREQ_OFFSET		0
+#define HPIPE_PWR_PLL_REF_FREQ_MASK		\
+				(0x1f << HPIPE_PWR_PLL_REF_FREQ_OFFSET)
+#define HPIPE_PWR_PLL_PHY_MODE_OFFSET		5
+#define HPIPE_PWR_PLL_PHY_MODE_MASK		\
+				(0x7 << HPIPE_PWR_PLL_PHY_MODE_OFFSET)
+
+#define HPIPE_DFE_REG0				0x01C
+#define HPIPE_DFE_RES_FORCE_OFFSET		15
+#define HPIPE_DFE_RES_FORCE_MASK		\
+				(0x1 << HPIPE_DFE_RES_FORCE_OFFSET)
+
+#define HPIPE_G2_SET_1_REG			0x040
+#define HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET	0
+#define HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK	\
+				(0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET	3
+#define HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK	\
+				(0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET	6
+#define HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK	\
+				(0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET)
+
+#define HPIPE_G3_SETTINGS_1_REG			0x048
+#define HPIPE_G3_RX_SELMUPI_OFFSET		0
+#define HPIPE_G3_RX_SELMUPI_MASK		\
+				(0x7 << HPIPE_G3_RX_SELMUPI_OFFSET)
+#define HPIPE_G3_RX_SELMUPF_OFFSET		3
+#define HPIPE_G3_RX_SELMUPF_MASK		\
+				(0x7 << HPIPE_G3_RX_SELMUPF_OFFSET)
+#define HPIPE_G3_SETTING_BIT_OFFSET		13
+#define HPIPE_G3_SETTING_BIT_MASK		\
+				(0x1 << HPIPE_G3_SETTING_BIT_OFFSET)
+
+#define HPIPE_INTERFACE_REG			0x94
+#define HPIPE_INTERFACE_GEN_MAX_OFFSET		10
+#define HPIPE_INTERFACE_GEN_MAX_MASK		\
+				(0x3 << HPIPE_INTERFACE_GEN_MAX_OFFSET)
+#define HPIPE_INTERFACE_DET_BYPASS_OFFSET	12
+#define HPIPE_INTERFACE_DET_BYPASS_MASK		\
+				(0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET)
+#define HPIPE_INTERFACE_LINK_TRAIN_OFFSET	14
+#define HPIPE_INTERFACE_LINK_TRAIN_MASK		\
+				(0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET)
+
+#define HPIPE_VDD_CAL_CTRL_REG			0x114
+#define HPIPE_EXT_SELLV_RXSAMPL_OFFSET		5
+#define HPIPE_EXT_SELLV_RXSAMPL_MASK		\
+				(0x1f << HPIPE_EXT_SELLV_RXSAMPL_OFFSET)
+
+#define HPIPE_PCIE_REG0				0x120
+#define HPIPE_PCIE_IDLE_SYNC_OFFSET		12
+#define HPIPE_PCIE_IDLE_SYNC_MASK		\
+				(0x1 << HPIPE_PCIE_IDLE_SYNC_OFFSET)
+#define HPIPE_PCIE_SEL_BITS_OFFSET		13
+#define HPIPE_PCIE_SEL_BITS_MASK		\
+				(0x3 << HPIPE_PCIE_SEL_BITS_OFFSET)
+
+#define HPIPE_LANE_ALIGN_REG			0x124
+#define HPIPE_LANE_ALIGN_OFF_OFFSET		12
+#define HPIPE_LANE_ALIGN_OFF_MASK		\
+				(0x1 << HPIPE_LANE_ALIGN_OFF_OFFSET)
+
+#define HPIPE_MISC_REG				0x13C
+#define HPIPE_MISC_CLK100M_125M_OFFSET		4
+#define HPIPE_MISC_CLK100M_125M_MASK		\
+				(0x1 << HPIPE_MISC_CLK100M_125M_OFFSET)
+#define HPIPE_MISC_ICP_FORCE_OFFSET		5
+#define HPIPE_MISC_ICP_FORCE_MASK		\
+				(0x1 << HPIPE_MISC_ICP_FORCE_OFFSET)
+#define HPIPE_MISC_TXDCLK_2X_OFFSET		6
+#define HPIPE_MISC_TXDCLK_2X_MASK		\
+				(0x1 << HPIPE_MISC_TXDCLK_2X_OFFSET)
+#define HPIPE_MISC_CLK500_EN_OFFSET		7
+#define HPIPE_MISC_CLK500_EN_MASK		\
+				(0x1 << HPIPE_MISC_CLK500_EN_OFFSET)
+#define HPIPE_MISC_REFCLK_SEL_OFFSET		10
+#define HPIPE_MISC_REFCLK_SEL_MASK		\
+				(0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET)
+
+#define HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG	0x16C
+#define HPIPE_SMAPLER_OFFSET			12
+#define HPIPE_SMAPLER_MASK			(0x1 << HPIPE_SMAPLER_OFFSET)
+
+#define HPIPE_PWR_CTR_DTL_REG			0x184
+#define HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET	2
+#define HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK		\
+				(0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET)
+
+#define HPIPE_FRAME_DET_CONTROL_REG		0x220
+#define HPIPE_FRAME_DET_LOCK_LOST_TO_OFFSET	12
+#define HPIPE_FRAME_DET_LOCK_LOST_TO_MASK	\
+				(0x1 << HPIPE_FRAME_DET_LOCK_LOST_TO_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_0_REG		0x268
+#define HPIPE_TX_TRAIN_P2P_HOLD_OFFSET		15
+#define HPIPE_TX_TRAIN_P2P_HOLD_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_REG			0x26C
+#define HPIPE_TX_TRAIN_CTRL_G1_OFFSET		0
+#define HPIPE_TX_TRAIN_CTRL_G1_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_CTRL_G1_OFFSET)
+#define HPIPE_TX_TRAIN_CTRL_GN1_OFFSET		1
+#define HPIPE_TX_TRAIN_CTRL_GN1_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_CTRL_GN1_OFFSET)
+#define HPIPE_TX_TRAIN_CTRL_G0_OFFSET		2
+#define HPIPE_TX_TRAIN_CTRL_G0_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_CTRL_G0_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_4_REG		0x278
+#define HPIPE_TRX_TRAIN_TIMER_OFFSET		0
+#define HPIPE_TRX_TRAIN_TIMER_MASK		\
+				(0x3FF << HPIPE_TRX_TRAIN_TIMER_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_5_REG		0x2A4
+#define HPIPE_TX_TRAIN_START_SQ_EN_OFFSET	11
+#define HPIPE_TX_TRAIN_START_SQ_EN_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET)
+#define HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET	12
+#define HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK	\
+				(0x1 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET)
+#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET	13
+#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK	\
+				(0x1 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET)
+#define HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET	14
+#define HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK	\
+				(0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET)
+
+#define HPIPE_TX_TRAIN_REG			0x31C
+#define HPIPE_TX_TRAIN_CHK_INIT_OFFSET		4
+#define HPIPE_TX_TRAIN_CHK_INIT_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_CHK_INIT_OFFSET)
+#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET	7
+#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK	\
+				(0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET)
+
+#define HPIPE_CDR_CONTROL_REG			0x418
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET	14
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_MASK	\
+				(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET	12
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK	\
+				(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET	9
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK		\
+				(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET	6
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_MASK		\
+				(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_11_REG		0x438
+#define HPIPE_TX_STATUS_CHECK_MODE_OFFSET	6
+#define HPIPE_TX_TX_STATUS_CHECK_MODE_MASK	\
+				(0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET)
+#define HPIPE_TX_NUM_OF_PRESET_OFFSET		10
+#define HPIPE_TX_NUM_OF_PRESET_MASK		\
+				(0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET)
+#define HPIPE_TX_SWEEP_PRESET_EN_OFFSET		15
+#define HPIPE_TX_SWEEP_PRESET_EN_MASK		\
+				(0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET)
+#define HPIPE_G2_SETTINGS_4_REG			0x44C
+#define HPIPE_G2_DFE_RES_OFFSET			8
+#define HPIPE_G2_DFE_RES_MASK			(0x3 << HPIPE_G2_DFE_RES_OFFSET)
+
+#define HPIPE_G3_SETTING_3_REG			0x450
+#define HPIPE_G3_FFE_CAP_SEL_OFFSET		0
+#define HPIPE_G3_FFE_CAP_SEL_MASK		\
+				(0xf << HPIPE_G3_FFE_CAP_SEL_OFFSET)
+#define HPIPE_G3_FFE_RES_SEL_OFFSET		4
+#define HPIPE_G3_FFE_RES_SEL_MASK		\
+				(0x7 << HPIPE_G3_FFE_RES_SEL_OFFSET)
+#define HPIPE_G3_FFE_SETTING_FORCE_OFFSET	7
+#define HPIPE_G3_FFE_SETTING_FORCE_MASK		\
+				(0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET)
+#define HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET	12
+#define HPIPE_G3_FFE_DEG_RES_LEVEL_MASK		\
+				(0x3 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET)
+#define HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET	14
+#define HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK	\
+				(0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET)
+
+#define HPIPE_G3_SETTING_4_REG			0x454
+#define HPIPE_G3_DFE_RES_OFFSET			8
+#define HPIPE_G3_DFE_RES_MASK			(0x3 << HPIPE_G3_DFE_RES_OFFSET)
+
+#define HPIPE_DFE_CONTROL_REG			0x470
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET	14
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK		\
+				(0x3 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET)
+
+#define HPIPE_DFE_CTRL_28_REG			0x49C
+#define HPIPE_DFE_CTRL_28_PIPE4_OFFSET		7
+#define HPIPE_DFE_CTRL_28_PIPE4_MASK		\
+				(0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET)
+
+#define HPIPE_G3_SETTING_5_REG			0x548
+#define HPIPE_G3_SETTING_5_G3_ICP_OFFSET	0
+#define HPIPE_G3_SETTING_5_G3_ICP_MASK		\
+				(0xf << HPIPE_G3_SETTING_5_G3_ICP_OFFSET)
+
+#define HPIPE_LANE_STATUS1_REG			0x60C
+#define HPIPE_LANE_STATUS1_PCLK_EN_OFFSET	0
+#define HPIPE_LANE_STATUS1_PCLK_EN_MASK		\
+				(0x1 << HPIPE_LANE_STATUS1_PCLK_EN_OFFSET)
+
+#define HPIPE_LANE_CFG4_REG			0x620
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET	3
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_MASK		\
+				(0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET)
+
+#define HPIPE_LANE_EQU_CONFIG_0_REG		0x69C
+#define HPIPE_CFG_EQ_FS_OFFSET			0
+#define HPIPE_CFG_EQ_FS_MASK			(0x3f << HPIPE_CFG_EQ_FS_OFFSET)
+#define HPIPE_CFG_EQ_LF_OFFSET			6
+#define HPIPE_CFG_EQ_LF_MASK			(0x3f << HPIPE_CFG_EQ_LF_OFFSET)
+#define HPIPE_CFG_PHY_RC_EP_OFFSET		12
+#define HPIPE_CFG_PHY_RC_EP_MASK		\
+				(0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET)
+
+#define HPIPE_LANE_EQ_CFG1_REG			0x6a0
+#define HPIPE_CFG_UPDATE_POLARITY_OFFSET	12
+#define HPIPE_CFG_UPDATE_POLARITY_MASK		\
+				(0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET)
+
+#define HPIPE_LANE_EQ_CFG2_REG			0x6a4
+#define HPIPE_CFG_EQ_BUNDLE_DIS_OFFSET		14
+#define HPIPE_CFG_EQ_BUNDLE_DIS_MASK		\
+				(0x1 << HPIPE_CFG_EQ_BUNDLE_DIS_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG0_REG		0x6a8
+#define HPIPE_CFG_CURSOR_PRESET0_OFFSET		0
+#define HPIPE_CFG_CURSOR_PRESET0_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET0_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET1_OFFSET		6
+#define HPIPE_CFG_CURSOR_PRESET1_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET1_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG1_REG		0x6ac
+#define HPIPE_CFG_CURSOR_PRESET2_OFFSET		0
+#define HPIPE_CFG_CURSOR_PRESET2_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET2_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET3_OFFSET		6
+#define HPIPE_CFG_CURSOR_PRESET3_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET3_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG2_REG		0x6b0
+#define HPIPE_CFG_CURSOR_PRESET4_OFFSET		0
+#define HPIPE_CFG_CURSOR_PRESET4_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET4_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET5_OFFSET		6
+#define HPIPE_CFG_CURSOR_PRESET5_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET5_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG3_REG		0x6b4
+#define HPIPE_CFG_CURSOR_PRESET6_OFFSET		0
+#define HPIPE_CFG_CURSOR_PRESET6_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET6_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET7_OFFSET		6
+#define HPIPE_CFG_CURSOR_PRESET7_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET7_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG4_REG		0x6b8
+#define HPIPE_CFG_CURSOR_PRESET8_OFFSET		0
+#define HPIPE_CFG_CURSOR_PRESET8_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET8_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET9_OFFSET		6
+#define HPIPE_CFG_CURSOR_PRESET9_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET9_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG5_REG		0x6bc
+#define HPIPE_CFG_CURSOR_PRESET10_OFFSET	0
+#define HPIPE_CFG_CURSOR_PRESET10_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET10_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET11_OFFSET	6
+#define HPIPE_CFG_CURSOR_PRESET11_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET11_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG6_REG		0x6c0
+#define HPIPE_CFG_PRE_CURSOR_PRESET0_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET0_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET0_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET0_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET0_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET0_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG7_REG		0x6c4
+#define HPIPE_CFG_PRE_CURSOR_PRESET1_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET1_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET1_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET1_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET1_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET1_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG8_REG		0x6c8
+#define HPIPE_CFG_PRE_CURSOR_PRESET2_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET2_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET2_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET2_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET2_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET2_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG9_REG		0x6cc
+#define HPIPE_CFG_PRE_CURSOR_PRESET3_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET3_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET3_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET3_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET3_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET3_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG10_REG		0x6d0
+#define HPIPE_CFG_PRE_CURSOR_PRESET4_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET4_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET4_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET4_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET4_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET4_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG11_REG		0x6d4
+#define HPIPE_CFG_PRE_CURSOR_PRESET5_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET5_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET5_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET5_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET5_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET5_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG12_REG		0x6d8
+#define HPIPE_CFG_PRE_CURSOR_PRESET6_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET6_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET6_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET6_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET6_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET6_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG13_REG		0x6dc
+#define HPIPE_CFG_PRE_CURSOR_PRESET7_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET7_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET7_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET7_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET7_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET7_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG14_REG		0x6e0
+#define HPIPE_CFG_PRE_CURSOR_PRESET8_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET8_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET8_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET8_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET8_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET8_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG15_REG		0x6e4
+#define HPIPE_CFG_PRE_CURSOR_PRESET9_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET9_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET9_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET9_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET9_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET9_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG16_REG		0x6e8
+#define HPIPE_CFG_PRE_CURSOR_PRESET10_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET10_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET10_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET10_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET10_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET10_OFFSET)
+
+#define HPIPE_LANE_EQ_REMOTE_SETTING_REG	0x6f8
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET	0
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK	\
+				(0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET)
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET	1
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK	\
+				(0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET)
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET	2
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK	\
+				(0xf << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET)
+
+#define HPIPE_RST_CLK_CTRL_REG			0x704
+#define HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET	0
+#define HPIPE_RST_CLK_CTRL_PIPE_RST_MASK	\
+				(0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET)
+#define HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET	2
+#define HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK	\
+				(0x1 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET)
+#define HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET	3
+#define HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK	\
+				(0x1 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET)
+#define HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET	9
+#define HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK	\
+				(0x1 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET)
+
+#define HPIPE_CLK_SRC_LO_REG				0x70c
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET	1
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_MASK		\
+			(0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET)
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET	2
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_MASK	\
+			(0x3 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET)
+#define HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET		5
+#define HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK		\
+			(0x7 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET)
+
+#define HPIPE_CLK_SRC_HI_REG			0x710
+#define HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET	0
+#define HPIPE_CLK_SRC_HI_LANE_STRT_MASK		\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET)
+#define HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET	1
+#define HPIPE_CLK_SRC_HI_LANE_BREAK_MASK	\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET)
+#define HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET	2
+#define HPIPE_CLK_SRC_HI_LANE_MASTER_MASK	\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET)
+#define HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET	7
+#define HPIPE_CLK_SRC_HI_MODE_PIPE_MASK		\
+			(0x1 << HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET)
+
+#define HPIPE_GLOBAL_PM_CTRL			0x740
+#define HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET	0
+#define HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK	\
+			(0xFF << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET)
+
+#endif /* _COMPHY_H_ */
+
diff --git a/drivers/marvell/comphy/comphy-cp110.h b/drivers/marvell/comphy/comphy-cp110.h
new file mode 100644
index 00000000..925abb5e
--- /dev/null
+++ b/drivers/marvell/comphy/comphy-cp110.h
@@ -0,0 +1,775 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Marvell CP110 SoC COMPHY unit driver */
+
+#ifndef _PHY_COMPHY_CP110_H
+#define _PHY_COMPHY_CP110_H
+
+#define SD_ADDR(base, lane)			(base + 0x1000 * lane)
+#define HPIPE_ADDR(base, lane)			(SD_ADDR(base, lane) + 0x800)
+#define COMPHY_ADDR(base, lane)			(base + 0x28 * lane)
+
+#define MAX_NUM_OF_FFE				8
+#define RX_TRAINING_TIMEOUT			500
+
+/* Comphy registers */
+#define COMMON_PHY_CFG1_REG			0x0
+#define COMMON_PHY_CFG1_PWR_UP_OFFSET		1
+#define COMMON_PHY_CFG1_PWR_UP_MASK		\
+				(0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET)
+#define COMMON_PHY_CFG1_PIPE_SELECT_OFFSET	2
+#define COMMON_PHY_CFG1_PIPE_SELECT_MASK	\
+				(0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET)
+#define COMMON_PHY_CFG1_CORE_RSTN_OFFSET	13
+#define COMMON_PHY_CFG1_CORE_RSTN_MASK		\
+				(0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET)
+#define COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET	14
+#define COMMON_PHY_CFG1_PWR_ON_RESET_MASK	\
+				(0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET)
+#define COMMON_PHY_PHY_MODE_OFFSET		15
+#define COMMON_PHY_PHY_MODE_MASK		\
+				(0x1 << COMMON_PHY_PHY_MODE_OFFSET)
+
+#define COMMON_PHY_CFG6_REG			0x14
+#define COMMON_PHY_CFG6_IF_40_SEL_OFFSET	18
+#define COMMON_PHY_CFG6_IF_40_SEL_MASK		\
+				(0x1 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET)
+
+#define COMMON_PHY_CFG6_REG			0x14
+#define COMMON_PHY_CFG6_IF_40_SEL_OFFSET	18
+#define COMMON_PHY_CFG6_IF_40_SEL_MASK		\
+				(0x1 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET)
+
+#define COMMON_SELECTOR_PHY_REG_OFFSET		0x140
+#define COMMON_SELECTOR_PIPE_REG_OFFSET		0x144
+#define COMMON_SELECTOR_COMPHY_MASK		0xf
+#define COMMON_SELECTOR_COMPHYN_FIELD_WIDTH	4
+#define COMMON_SELECTOR_COMPHYN_SATA		0x4
+#define COMMON_SELECTOR_PIPE_COMPHY_PCIE	0x4
+#define COMMON_SELECTOR_PIPE_COMPHY_USBH	0x1
+#define COMMON_SELECTOR_PIPE_COMPHY_USBD	0x2
+
+/* SGMII/HS-SGMII/SFI/RXAUI */
+#define COMMON_SELECTOR_COMPHY0_1_2_NETWORK	0x1
+#define COMMON_SELECTOR_COMPHY3_RXAUI		0x1
+#define COMMON_SELECTOR_COMPHY3_SGMII		0x2
+#define COMMON_SELECTOR_COMPHY4_PORT1		0x1
+#define COMMON_SELECTOR_COMPHY4_ALL_OTHERS	0x2
+#define COMMON_SELECTOR_COMPHY5_RXAUI		0x2
+#define COMMON_SELECTOR_COMPHY5_SGMII		0x1
+
+#define COMMON_PHY_SD_CTRL1			0x148
+#define COMMON_PHY_SD_CTRL1_COMPHY_0_PORT_OFFSET	0
+#define COMMON_PHY_SD_CTRL1_COMPHY_1_PORT_OFFSET	4
+#define COMMON_PHY_SD_CTRL1_COMPHY_2_PORT_OFFSET	8
+#define COMMON_PHY_SD_CTRL1_COMPHY_3_PORT_OFFSET	12
+#define COMMON_PHY_SD_CTRL1_COMPHY_0_3_PORT_MASK	0xFFFF
+#define COMMON_PHY_SD_CTRL1_COMPHY_0_1_PORT_MASK	0xFF
+#define COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET	24
+#define COMMON_PHY_SD_CTRL1_PCIE_X4_EN_MASK	\
+				(0x1 << COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET)
+#define COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET	25
+#define COMMON_PHY_SD_CTRL1_PCIE_X2_EN_MASK	\
+				(0x1 << COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET)
+#define COMMON_PHY_SD_CTRL1_RXAUI1_OFFSET	26
+#define COMMON_PHY_SD_CTRL1_RXAUI1_MASK		\
+				(0x1 << COMMON_PHY_SD_CTRL1_RXAUI1_OFFSET)
+#define COMMON_PHY_SD_CTRL1_RXAUI0_OFFSET	27
+#define COMMON_PHY_SD_CTRL1_RXAUI0_MASK		\
+				(0x1 << COMMON_PHY_SD_CTRL1_RXAUI0_OFFSET)
+
+/* DFX register */
+#define DFX_BASE				(0x400000)
+#define DFX_DEV_GEN_CTRL12_REG			(0x280)
+#define DFX_DEV_GEN_PCIE_CLK_SRC_MUX		(0x3)
+#define DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET		7
+#define DFX_DEV_GEN_PCIE_CLK_SRC_MASK		\
+				(0x3 << DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET)
+
+/* SerDes IP registers */
+#define SD_EXTERNAL_CONFIG0_REG				0
+#define SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET		1
+#define SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK		\
+			(1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET)
+#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET	3
+#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK		\
+			(0xf << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET)
+#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET	7
+#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK		\
+			(0xf << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET)
+#define SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET		11
+#define SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK		\
+			(1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET)
+#define SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET		12
+#define SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK		\
+			(1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET)
+#define SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET	14
+#define SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK		\
+			(1 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET)
+#define SD_EXTERNAL_CONFIG0_MEDIA_MODE_OFFSET		15
+#define SD_EXTERNAL_CONFIG0_MEDIA_MODE_MASK		\
+			(0x1 << SD_EXTERNAL_CONFIG0_MEDIA_MODE_OFFSET)
+
+#define SD_EXTERNAL_CONFIG1_REG			0x4
+#define SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET	3
+#define SD_EXTERNAL_CONFIG1_RESET_IN_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET)
+#define SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET	4
+#define SD_EXTERNAL_CONFIG1_RX_INIT_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET)
+#define SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET	5
+#define SD_EXTERNAL_CONFIG1_RESET_CORE_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET)
+#define SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET	6
+#define SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET)
+
+#define SD_EXTERNAL_CONFIG2_REG			0x8
+#define SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET	4
+#define SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET)
+#define SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET	7
+#define SD_EXTERNAL_CONFIG2_SSC_ENABLE_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET)
+
+#define SD_EXTERNAL_STATUS_REG				0xc
+#define SD_EXTERNAL_STATUS_START_RX_TRAINING_OFFSET	7
+#define SD_EXTERNAL_STATUS_START_RX_TRAINING_MASK	\
+			(1 << SD_EXTERNAL_STATUS_START_RX_TRAINING_OFFSET)
+
+#define SD_EXTERNAL_STATUS0_REG			0x18
+#define SD_EXTERNAL_STATUS0_PLL_TX_OFFSET	2
+#define SD_EXTERNAL_STATUS0_PLL_TX_MASK		\
+			(0x1 << SD_EXTERNAL_STATUS0_PLL_TX_OFFSET)
+#define SD_EXTERNAL_STATUS0_PLL_RX_OFFSET	3
+#define SD_EXTERNAL_STATUS0_PLL_RX_MASK		\
+			(0x1 << SD_EXTERNAL_STATUS0_PLL_RX_OFFSET)
+#define SD_EXTERNAL_STATUS0_RX_INIT_OFFSET	4
+#define SD_EXTERNAL_STATUS0_RX_INIT_MASK	\
+			(0x1 << SD_EXTERNAL_STATUS0_RX_INIT_OFFSET)
+
+#define SD_EXTERNAL_STATAUS1_REG			0x1c
+#define SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_COMP_OFFSET	0
+#define SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_COMP_MASK	\
+	(1 << SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_COMP_OFFSET)
+#define SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_FAILED_OFFSET	1
+#define SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_FAILED_MASK	\
+	(1 << SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_FAILED_OFFSET)
+
+/* HPIPE registers */
+#define HPIPE_PWR_PLL_REG			0x4
+#define HPIPE_PWR_PLL_REF_FREQ_OFFSET		0
+#define HPIPE_PWR_PLL_REF_FREQ_MASK		\
+			(0x1f << HPIPE_PWR_PLL_REF_FREQ_OFFSET)
+#define HPIPE_PWR_PLL_PHY_MODE_OFFSET		5
+#define HPIPE_PWR_PLL_PHY_MODE_MASK		\
+			(0x7 << HPIPE_PWR_PLL_PHY_MODE_OFFSET)
+
+#define HPIPE_CAL_REG1_REG			0xc
+#define HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET	10
+#define HPIPE_CAL_REG_1_EXT_TXIMP_MASK		\
+			(0x1f << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET)
+#define HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET	15
+#define HPIPE_CAL_REG_1_EXT_TXIMP_EN_MASK	\
+			(0x1 << HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET)
+
+#define HPIPE_SQUELCH_FFE_SETTING_REG		0x18
+#define HPIPE_SQUELCH_THRESH_IN_OFFSET		8
+#define HPIPE_SQUELCH_THRESH_IN_MASK		\
+			(0xf << HPIPE_SQUELCH_THRESH_IN_OFFSET)
+#define HPIPE_SQUELCH_DETECTED_OFFSET		14
+#define HPIPE_SQUELCH_DETECTED_MASK		\
+			(0x1 << HPIPE_SQUELCH_DETECTED_OFFSET)
+
+#define HPIPE_DFE_REG0				0x1c
+#define HPIPE_DFE_RES_FORCE_OFFSET		15
+#define HPIPE_DFE_RES_FORCE_MASK		\
+			(0x1 << HPIPE_DFE_RES_FORCE_OFFSET)
+
+#define HPIPE_DFE_F3_F5_REG			0x28
+#define HPIPE_DFE_F3_F5_DFE_EN_OFFSET		14
+#define HPIPE_DFE_F3_F5_DFE_EN_MASK		\
+			(0x1 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET)
+#define HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET		15
+#define HPIPE_DFE_F3_F5_DFE_CTRL_MASK		\
+			(0x1 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET)
+
+#define HPIPE_G1_SET_0_REG			0x34
+#define HPIPE_G1_SET_0_G1_TX_AMP_OFFSET		1
+#define HPIPE_G1_SET_0_G1_TX_AMP_MASK		\
+			(0x1f << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET)
+#define HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET	6
+#define HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK	\
+			(0x1 << HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET)
+#define HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET	7
+#define HPIPE_G1_SET_0_G1_TX_EMPH1_MASK		\
+			(0xf << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET)
+#define HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET	11
+#define HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK	\
+			(0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET)
+
+#define HPIPE_G1_SET_1_REG			0x38
+#define HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET	0
+#define HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK	\
+			(0x7 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET	3
+#define HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK	\
+			(0x7 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET	6
+#define HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK	\
+			(0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET	8
+#define HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK	\
+			(0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET	10
+#define HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK	\
+			(0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET	11
+#define HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK	\
+			(0x3 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET)
+
+#define HPIPE_G2_SET_0_REG			0x3c
+#define HPIPE_G2_SET_0_G2_TX_AMP_OFFSET		1
+#define HPIPE_G2_SET_0_G2_TX_AMP_MASK		\
+			(0x1f << HPIPE_G2_SET_0_G2_TX_AMP_OFFSET)
+#define HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET	6
+#define HPIPE_G2_SET_0_G2_TX_AMP_ADJ_MASK	\
+			(0x1 << HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET)
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET	7
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_MASK		\
+			(0xf << HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET)
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET	11
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_EN_MASK	\
+			(0x1 << HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET)
+
+#define HPIPE_G2_SET_1_REG			0x40
+#define HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET	0
+#define HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK	\
+			(0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET	3
+#define HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK	\
+			(0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET	6
+#define HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK	\
+			(0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET	8
+#define HPIPE_G2_SET_1_G2_RX_SELMUFF_MASK	\
+			(0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_DFE_EN_OFFSET	10
+#define HPIPE_G2_SET_1_G2_RX_DFE_EN_MASK	\
+			(0x1 << HPIPE_G2_SET_1_G2_RX_DFE_EN_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET	11
+#define HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_MASK	\
+			(0x3 << HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET)
+
+#define HPIPE_G3_SET_0_REG			0x44
+#define HPIPE_G3_SET_0_G3_TX_AMP_OFFSET		1
+#define HPIPE_G3_SET_0_G3_TX_AMP_MASK		\
+			(0x1f << HPIPE_G3_SET_0_G3_TX_AMP_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET	6
+#define HPIPE_G3_SET_0_G3_TX_AMP_ADJ_MASK	\
+			(0x1 << HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET	7
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_MASK		\
+			(0xf << HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET	11
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_EN_MASK	\
+			(0x1 << HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET 12
+#define HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_MASK	\
+			(0x7 << HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET 15
+#define HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_MASK	\
+			(0x1 << HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET)
+
+#define HPIPE_G3_SET_1_REG				0x48
+#define HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET		0
+#define HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK		\
+			(0x7 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET		3
+#define HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK		\
+			(0x7 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET		6
+#define HPIPE_G3_SET_1_G3_RX_SELMUFI_MASK		\
+			(0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET		8
+#define HPIPE_G3_SET_1_G3_RX_SELMUFF_MASK		\
+			(0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET		10
+#define HPIPE_G3_SET_1_G3_RX_DFE_EN_MASK		\
+			(0x1 << HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET		11
+#define HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_MASK		\
+			(0x3 << HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET)
+#define HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET	13
+#define HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK	\
+			(0x1 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET)
+
+#define HPIPE_PHY_TEST_CONTROL_REG		0x54
+#define HPIPE_PHY_TEST_PATTERN_SEL_OFFSET	4
+#define HPIPE_PHY_TEST_PATTERN_SEL_MASK		\
+			(0xf << HPIPE_PHY_TEST_PATTERN_SEL_OFFSET)
+#define HPIPE_PHY_TEST_RESET_OFFSET		14
+#define HPIPE_PHY_TEST_RESET_MASK		\
+			(0x1 << HPIPE_PHY_TEST_RESET_OFFSET)
+#define HPIPE_PHY_TEST_EN_OFFSET		15
+#define HPIPE_PHY_TEST_EN_MASK			\
+			(0x1 << HPIPE_PHY_TEST_EN_OFFSET)
+
+#define HPIPE_PHY_TEST_DATA_REG			0x6c
+#define HPIPE_PHY_TEST_DATA_OFFSET		0
+#define HPIPE_PHY_TEST_DATA_MASK		\
+			(0xffff << HPIPE_PHY_TEST_DATA_OFFSET)
+
+#define HPIPE_LOOPBACK_REG			0x8c
+#define HPIPE_LOOPBACK_SEL_OFFSET		1
+#define HPIPE_LOOPBACK_SEL_MASK			\
+			(0x7 << HPIPE_LOOPBACK_SEL_OFFSET)
+#define HPIPE_CDR_LOCK_OFFSET			7
+#define HPIPE_CDR_LOCK_MASK			\
+			(0x1 << HPIPE_CDR_LOCK_OFFSET)
+#define HPIPE_CDR_LOCK_DET_EN_OFFSET		8
+#define HPIPE_CDR_LOCK_DET_EN_MASK		\
+			(0x1 << HPIPE_CDR_LOCK_DET_EN_OFFSET)
+
+#define HPIPE_INTERFACE_REG			0x94
+#define HPIPE_INTERFACE_GEN_MAX_OFFSET		10
+#define HPIPE_INTERFACE_GEN_MAX_MASK		\
+			(0x3 << HPIPE_INTERFACE_GEN_MAX_OFFSET)
+#define HPIPE_INTERFACE_DET_BYPASS_OFFSET	12
+#define HPIPE_INTERFACE_DET_BYPASS_MASK		\
+			(0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET)
+#define HPIPE_INTERFACE_LINK_TRAIN_OFFSET	14
+#define HPIPE_INTERFACE_LINK_TRAIN_MASK		\
+			(0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET)
+
+#define HPIPE_G1_SET_2_REG			0xf4
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET	0
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_MASK		\
+			(0xf << HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET)
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET	4
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK	\
+			(0x1 << HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET)
+
+#define HPIPE_G2_SET_2_REG			0xf8
+#define HPIPE_G2_TX_SSC_AMP_OFFSET		9
+#define HPIPE_G2_TX_SSC_AMP_MASK		\
+			(0x7f << HPIPE_G2_TX_SSC_AMP_OFFSET)
+
+#define HPIPE_VDD_CAL_0_REG			0x108
+#define HPIPE_CAL_VDD_CONT_MODE_OFFSET		15
+#define HPIPE_CAL_VDD_CONT_MODE_MASK		\
+			(0x1 << HPIPE_CAL_VDD_CONT_MODE_OFFSET)
+
+#define HPIPE_VDD_CAL_CTRL_REG			0x114
+#define HPIPE_EXT_SELLV_RXSAMPL_OFFSET		5
+#define HPIPE_EXT_SELLV_RXSAMPL_MASK		\
+			(0x1f << HPIPE_EXT_SELLV_RXSAMPL_OFFSET)
+
+#define HPIPE_PCIE_REG0				0x120
+#define HPIPE_PCIE_IDLE_SYNC_OFFSET		12
+#define HPIPE_PCIE_IDLE_SYNC_MASK		\
+			(0x1 << HPIPE_PCIE_IDLE_SYNC_OFFSET)
+#define HPIPE_PCIE_SEL_BITS_OFFSET		13
+#define HPIPE_PCIE_SEL_BITS_MASK		\
+			(0x3 << HPIPE_PCIE_SEL_BITS_OFFSET)
+
+#define HPIPE_LANE_ALIGN_REG			0x124
+#define HPIPE_LANE_ALIGN_OFF_OFFSET		12
+#define HPIPE_LANE_ALIGN_OFF_MASK		\
+			(0x1 << HPIPE_LANE_ALIGN_OFF_OFFSET)
+
+#define HPIPE_MISC_REG				0x13C
+#define HPIPE_MISC_CLK100M_125M_OFFSET		4
+#define HPIPE_MISC_CLK100M_125M_MASK		\
+			(0x1 << HPIPE_MISC_CLK100M_125M_OFFSET)
+#define HPIPE_MISC_ICP_FORCE_OFFSET		5
+#define HPIPE_MISC_ICP_FORCE_MASK		\
+			(0x1 << HPIPE_MISC_ICP_FORCE_OFFSET)
+#define HPIPE_MISC_TXDCLK_2X_OFFSET		6
+#define HPIPE_MISC_TXDCLK_2X_MASK		\
+			(0x1 << HPIPE_MISC_TXDCLK_2X_OFFSET)
+#define HPIPE_MISC_CLK500_EN_OFFSET		7
+#define HPIPE_MISC_CLK500_EN_MASK		\
+			(0x1 << HPIPE_MISC_CLK500_EN_OFFSET)
+#define HPIPE_MISC_REFCLK_SEL_OFFSET		10
+#define HPIPE_MISC_REFCLK_SEL_MASK		\
+			(0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET)
+
+#define HPIPE_RX_CONTROL_1_REG			0x140
+#define HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET	11
+#define HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK	\
+			(0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET)
+#define HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET	12
+#define HPIPE_RX_CONTROL_1_CLK8T_EN_MASK	\
+			(0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET)
+
+#define HPIPE_PWR_CTR_REG			0x148
+#define HPIPE_PWR_CTR_RST_DFE_OFFSET		0
+#define HPIPE_PWR_CTR_RST_DFE_MASK		\
+			(0x1 << HPIPE_PWR_CTR_RST_DFE_OFFSET)
+#define HPIPE_PWR_CTR_SFT_RST_OFFSET		10
+#define HPIPE_PWR_CTR_SFT_RST_MASK		\
+			(0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET)
+
+#define HPIPE_SPD_DIV_FORCE_REG				0x154
+#define HPIPE_TXDIGCK_DIV_FORCE_OFFSET			7
+#define HPIPE_TXDIGCK_DIV_FORCE_MASK			\
+			(0x1 << HPIPE_TXDIGCK_DIV_FORCE_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET		8
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_MASK		\
+			(0x3 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET	10
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_MASK	\
+			(0x1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET		13
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_MASK		\
+			(0x3 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET	15
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK	\
+			(0x1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET)
+
+#define HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG	0x16C
+#define HPIPE_RX_SAMPLER_OS_GAIN_OFFSET		6
+#define HPIPE_RX_SAMPLER_OS_GAIN_MASK		\
+			(0x3 << HPIPE_RX_SAMPLER_OS_GAIN_OFFSET)
+#define HPIPE_SMAPLER_OFFSET			12
+#define HPIPE_SMAPLER_MASK			\
+			(0x1 << HPIPE_SMAPLER_OFFSET)
+
+#define HPIPE_TX_REG1_REG			0x174
+#define HPIPE_TX_REG1_TX_EMPH_RES_OFFSET	5
+#define HPIPE_TX_REG1_TX_EMPH_RES_MASK		\
+			(0x3 << HPIPE_TX_REG1_TX_EMPH_RES_OFFSET)
+#define HPIPE_TX_REG1_SLC_EN_OFFSET		10
+#define HPIPE_TX_REG1_SLC_EN_MASK		\
+			(0x3f << HPIPE_TX_REG1_SLC_EN_OFFSET)
+
+#define HPIPE_PWR_CTR_DTL_REG				0x184
+#define HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET		0
+#define HPIPE_PWR_CTR_DTL_SQ_DET_EN_MASK		\
+			(0x1 << HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET)
+#define HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET		1
+#define HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_MASK		\
+			(0x1 << HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET)
+#define HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET		2
+#define HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK			\
+			(0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET)
+#define HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET		4
+#define HPIPE_PWR_CTR_DTL_CLAMPING_SEL_MASK		\
+			(0x7 << HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET)
+#define HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET	10
+#define HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_MASK	\
+			(0x1 << HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET)
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET		12
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_MASK			\
+			(0x3 << HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET)
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET		14
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_MASK		\
+			(1 << HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET)
+
+#define HPIPE_PHASE_CONTROL_REG			0x188
+#define HPIPE_OS_PH_OFFSET_OFFSET		0
+#define HPIPE_OS_PH_OFFSET_MASK			\
+			(0x7f << HPIPE_OS_PH_OFFSET_OFFSET)
+#define HPIPE_OS_PH_OFFSET_FORCE_OFFSET		7
+#define HPIPE_OS_PH_OFFSET_FORCE_MASK		\
+			(0x1 << HPIPE_OS_PH_OFFSET_FORCE_OFFSET)
+#define HPIPE_OS_PH_VALID_OFFSET		8
+#define HPIPE_OS_PH_VALID_MASK			\
+			(0x1 << HPIPE_OS_PH_VALID_OFFSET)
+
+#define HPIPE_SQ_GLITCH_FILTER_CTRL		0x1c8
+#define HPIPE_SQ_DEGLITCH_WIDTH_P_OFFSET	0
+#define HPIPE_SQ_DEGLITCH_WIDTH_P_MASK		\
+			(0xf << HPIPE_SQ_DEGLITCH_WIDTH_P_OFFSET)
+#define HPIPE_SQ_DEGLITCH_WIDTH_N_OFFSET	4
+#define HPIPE_SQ_DEGLITCH_WIDTH_N_MASK		\
+			(0xf << HPIPE_SQ_DEGLITCH_WIDTH_N_OFFSET)
+#define HPIPE_SQ_DEGLITCH_EN_OFFSET		8
+#define HPIPE_SQ_DEGLITCH_EN_MASK		\
+			(0x1 << HPIPE_SQ_DEGLITCH_EN_OFFSET)
+
+#define HPIPE_FRAME_DETECT_CTRL_0_REG		0x214
+#define HPIPE_TRAIN_PAT_NUM_OFFSET		0x7
+#define HPIPE_TRAIN_PAT_NUM_MASK		\
+			(0x1FF << HPIPE_TRAIN_PAT_NUM_OFFSET)
+
+#define HPIPE_FRAME_DETECT_CTRL_3_REG			0x220
+#define HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET	12
+#define HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK		\
+			(0x1 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET)
+
+#define HPIPE_DME_REG				0x228
+#define HPIPE_DME_ETHERNET_MODE_OFFSET		7
+#define HPIPE_DME_ETHERNET_MODE_MASK		\
+			(0x1 << HPIPE_DME_ETHERNET_MODE_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_0_REG		0x268
+#define HPIPE_TX_TRAIN_P2P_HOLD_OFFSET		15
+#define HPIPE_TX_TRAIN_P2P_HOLD_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_REG			0x26C
+#define HPIPE_TX_TRAIN_CTRL_G1_OFFSET		0
+#define HPIPE_TX_TRAIN_CTRL_G1_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_CTRL_G1_OFFSET)
+#define HPIPE_TX_TRAIN_CTRL_GN1_OFFSET		1
+#define HPIPE_TX_TRAIN_CTRL_GN1_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_CTRL_GN1_OFFSET)
+#define HPIPE_TX_TRAIN_CTRL_G0_OFFSET		2
+#define HPIPE_TX_TRAIN_CTRL_G0_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_CTRL_G0_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_4_REG		0x278
+#define HPIPE_TRX_TRAIN_TIMER_OFFSET		0
+#define HPIPE_TRX_TRAIN_TIMER_MASK		\
+			(0x3FF << HPIPE_TRX_TRAIN_TIMER_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_5_REG		0x2A4
+#define HPIPE_RX_TRAIN_TIMER_OFFSET		0
+#define HPIPE_RX_TRAIN_TIMER_MASK		\
+			(0x3ff << HPIPE_RX_TRAIN_TIMER_OFFSET)
+#define HPIPE_TX_TRAIN_START_SQ_EN_OFFSET	11
+#define HPIPE_TX_TRAIN_START_SQ_EN_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET)
+#define HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET	12
+#define HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK	\
+			(0x1 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET)
+#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET	13
+#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK	\
+			(0x1 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET)
+#define HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET	14
+#define HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK	\
+			(0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET)
+
+#define HPIPE_TX_TRAIN_REG			0x31C
+#define HPIPE_TX_TRAIN_CHK_INIT_OFFSET		4
+#define HPIPE_TX_TRAIN_CHK_INIT_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_CHK_INIT_OFFSET)
+#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET	7
+#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK	\
+			(0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET)
+#define HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET	8
+#define HPIPE_TX_TRAIN_16BIT_AUTO_EN_MASK	\
+			(0x1 << HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET)
+#define HPIPE_TX_TRAIN_PAT_SEL_OFFSET		9
+#define HPIPE_TX_TRAIN_PAT_SEL_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET)
+
+#define HPIPE_SAVED_DFE_VALUES_REG		0x328
+#define HPIPE_SAVED_DFE_VALUES_SAV_F0D_OFFSET	10
+#define HPIPE_SAVED_DFE_VALUES_SAV_F0D_MASK	\
+			(0x3f << HPIPE_SAVED_DFE_VALUES_SAV_F0D_OFFSET)
+
+#define HPIPE_CDR_CONTROL_REG			0x418
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET	14
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_MASK	\
+			(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET	12
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK	\
+			(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET	9
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK		\
+			(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET	6
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_MASK		\
+			(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_11_REG		0x438
+#define HPIPE_TX_STATUS_CHECK_MODE_OFFSET	6
+#define HPIPE_TX_TX_STATUS_CHECK_MODE_MASK	\
+			(0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET)
+#define HPIPE_TX_NUM_OF_PRESET_OFFSET		10
+#define HPIPE_TX_NUM_OF_PRESET_MASK		\
+			(0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET)
+#define HPIPE_TX_SWEEP_PRESET_EN_OFFSET		15
+#define HPIPE_TX_SWEEP_PRESET_EN_MASK		\
+			(0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET)
+
+#define HPIPE_G1_SETTINGS_3_REG				0x440
+#define HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET	0
+#define HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK		\
+			(0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET	4
+#define HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK		\
+			(0x7 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET	7
+#define HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK	\
+			(0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET		9
+#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK		\
+			(0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET	12
+#define HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_MASK	\
+			(0x3 << HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET	14
+#define HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_MASK	\
+		(0x3 << HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET)
+
+#define HPIPE_G1_SETTINGS_4_REG			0x444
+#define HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET	8
+#define HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK	\
+			(0x3 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET)
+
+#define HPIPE_G2_SETTINGS_4_REG			0x44c
+#define HPIPE_G2_DFE_RES_OFFSET			8
+#define HPIPE_G2_DFE_RES_MASK			\
+			(0x3 << HPIPE_G2_DFE_RES_OFFSET)
+
+#define HPIPE_G3_SETTING_3_REG			0x450
+#define HPIPE_G3_FFE_CAP_SEL_OFFSET		0
+#define HPIPE_G3_FFE_CAP_SEL_MASK		\
+			(0xf << HPIPE_G3_FFE_CAP_SEL_OFFSET)
+#define HPIPE_G3_FFE_RES_SEL_OFFSET		4
+#define HPIPE_G3_FFE_RES_SEL_MASK		\
+			(0x7 << HPIPE_G3_FFE_RES_SEL_OFFSET)
+#define HPIPE_G3_FFE_SETTING_FORCE_OFFSET	7
+#define HPIPE_G3_FFE_SETTING_FORCE_MASK		\
+			(0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET)
+#define HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET	12
+#define HPIPE_G3_FFE_DEG_RES_LEVEL_MASK		\
+			(0x3 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET)
+#define HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET	14
+#define HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK	\
+			(0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET)
+
+#define HPIPE_G3_SETTING_4_REG			0x454
+#define HPIPE_G3_DFE_RES_OFFSET			8
+#define HPIPE_G3_DFE_RES_MASK			(0x3 << HPIPE_G3_DFE_RES_OFFSET)
+
+#define HPIPE_TX_PRESET_INDEX_REG		0x468
+#define HPIPE_TX_PRESET_INDEX_OFFSET		0
+#define HPIPE_TX_PRESET_INDEX_MASK		\
+			(0xf << HPIPE_TX_PRESET_INDEX_OFFSET)
+
+#define HPIPE_DFE_CONTROL_REG			0x470
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET	14
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK		\
+			(0x3 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET)
+
+#define HPIPE_DFE_CTRL_28_REG			0x49C
+#define HPIPE_DFE_CTRL_28_PIPE4_OFFSET		7
+#define HPIPE_DFE_CTRL_28_PIPE4_MASK		\
+			(0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET)
+
+#define HPIPE_G1_SETTING_5_REG			0x538
+#define HPIPE_G1_SETTING_5_G1_ICP_OFFSET	0
+#define HPIPE_G1_SETTING_5_G1_ICP_MASK		\
+			(0xf << HPIPE_G1_SETTING_5_G1_ICP_OFFSET)
+
+#define HPIPE_G3_SETTING_5_REG			0x548
+#define HPIPE_G3_SETTING_5_G3_ICP_OFFSET	0
+#define HPIPE_G3_SETTING_5_G3_ICP_MASK		\
+			(0xf << HPIPE_G3_SETTING_5_G3_ICP_OFFSET)
+
+#define HPIPE_LANE_CONFIG0_REG			0x600
+#define HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET	0
+#define HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK	\
+			(0x1 << HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET)
+
+#define HPIPE_LANE_STATUS1_REG			0x60C
+#define HPIPE_LANE_STATUS1_PCLK_EN_OFFSET	0
+#define HPIPE_LANE_STATUS1_PCLK_EN_MASK		\
+			(0x1 << HPIPE_LANE_STATUS1_PCLK_EN_OFFSET)
+
+#define HPIPE_LANE_CFG4_REG			0x620
+#define HPIPE_LANE_CFG4_DFE_CTRL_OFFSET		0
+#define HPIPE_LANE_CFG4_DFE_CTRL_MASK		\
+			(0x7 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET)
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET	3
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_MASK		\
+			(0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET)
+#define HPIPE_LANE_CFG4_DFE_OVER_OFFSET		6
+#define HPIPE_LANE_CFG4_DFE_OVER_MASK		\
+			(0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET)
+#define HPIPE_LANE_CFG4_SSC_CTRL_OFFSET		7
+#define HPIPE_LANE_CFG4_SSC_CTRL_MASK		\
+			(0x1 << HPIPE_LANE_CFG4_SSC_CTRL_OFFSET)
+
+#define HPIPE_LANE_EQ_REMOTE_SETTING_REG	0x6f8
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET	0
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK	\
+			(0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET)
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET	1
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK	\
+			(0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET)
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET	2
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK	\
+			(0xf << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET)
+
+#define HPIPE_LANE_EQU_CONFIG_0_REG		0x69C
+#define HPIPE_CFG_PHY_RC_EP_OFFSET		12
+#define HPIPE_CFG_PHY_RC_EP_MASK		\
+			(0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET)
+
+#define HPIPE_LANE_EQ_CFG1_REG			0x6a0
+#define HPIPE_CFG_UPDATE_POLARITY_OFFSET	12
+#define HPIPE_CFG_UPDATE_POLARITY_MASK		\
+			(0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET)
+
+#define HPIPE_LANE_EQ_CFG2_REG			0x6a4
+#define HPIPE_CFG_EQ_BUNDLE_DIS_OFFSET		14
+#define HPIPE_CFG_EQ_BUNDLE_DIS_MASK		\
+			(0x1 << HPIPE_CFG_EQ_BUNDLE_DIS_OFFSET)
+
+#define HPIPE_RST_CLK_CTRL_REG			0x704
+#define HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET	0
+#define HPIPE_RST_CLK_CTRL_PIPE_RST_MASK	\
+			(0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET)
+#define HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET	2
+#define HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK	\
+			(0x1 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET)
+#define HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET	3
+#define HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK	\
+			(0x1 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET)
+#define HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET	9
+#define HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK	\
+			(0x1 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET)
+
+#define HPIPE_TST_MODE_CTRL_REG			0x708
+#define HPIPE_TST_MODE_CTRL_MODE_MARGIN_OFFSET	2
+#define HPIPE_TST_MODE_CTRL_MODE_MARGIN_MASK	\
+			(0x1 << HPIPE_TST_MODE_CTRL_MODE_MARGIN_OFFSET)
+
+#define HPIPE_CLK_SRC_LO_REG				0x70c
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET	1
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_MASK		\
+			(0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET)
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET	2
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_MASK	\
+			(0x3 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET)
+#define HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET		5
+#define HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK		\
+			(0x7 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET)
+
+#define HPIPE_CLK_SRC_HI_REG			0x710
+#define HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET	0
+#define HPIPE_CLK_SRC_HI_LANE_STRT_MASK		\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET)
+#define HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET	1
+#define HPIPE_CLK_SRC_HI_LANE_BREAK_MASK	\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET)
+#define HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET	2
+#define HPIPE_CLK_SRC_HI_LANE_MASTER_MASK	\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET)
+#define HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET	7
+#define HPIPE_CLK_SRC_HI_MODE_PIPE_MASK		\
+			(0x1 << HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET)
+
+#define HPIPE_GLOBAL_MISC_CTRL			0x718
+#define HPIPE_GLOBAL_PM_CTRL			0x740
+#define HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET	0
+#define HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK	\
+			(0xFF << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET)
+
+/* General defines */
+#define PLL_LOCK_TIMEOUT			15000
+
+#endif /* _PHY_COMPHY_CP110_H */
+
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c
new file mode 100644
index 00000000..8b78280b
--- /dev/null
+++ b/drivers/marvell/comphy/phy-comphy-cp110.c
@@ -0,0 +1,2319 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Marvell CP110 SoC COMPHY unit driver */
+
+#include <debug.h>
+#include <delay_timer.h>
+#include <errno.h>
+#include <mmio.h>
+#include <mvebu_def.h>
+#include <spinlock.h>
+#include "mvebu.h"
+#include "comphy-cp110.h"
+
+/* #define DEBUG_COMPHY */
+#ifdef DEBUG_COMPHY
+#define debug(format...) printf(format)
+#else
+#define debug(format, arg...)
+#endif
+
+/* A lane is described by 4 fields:
+ *      - bit 1~0 represent comphy polarity invert
+ *      - bit 7~2 represent comphy speed
+ *      - bit 11~8 represent unit index
+ *      - bit 16~12 represent mode
+ *      - bit 17 represent comphy indication of clock source
+ *      - bit 19-18 represents pcie width (in case of pcie comphy config.)
+ *      - bit 31~20 reserved
+ */
+
+#define COMPHY_INVERT_OFFSET	0
+#define COMPHY_INVERT_LEN	2
+#define COMPHY_INVERT_MASK	COMPHY_MASK(COMPHY_INVERT_OFFSET, \
+						COMPHY_INVERT_LEN)
+#define COMPHY_SPEED_OFFSET	(COMPHY_INVERT_OFFSET + COMPHY_INVERT_LEN)
+#define COMPHY_SPEED_LEN	6
+#define COMPHY_SPEED_MASK	COMPHY_MASK(COMPHY_SPEED_OFFSET, \
+						COMPHY_SPEED_LEN)
+#define COMPHY_UNIT_ID_OFFSET	(COMPHY_SPEED_OFFSET + COMPHY_SPEED_LEN)
+#define COMPHY_UNIT_ID_LEN	4
+#define COMPHY_UNIT_ID_MASK	COMPHY_MASK(COMPHY_UNIT_ID_OFFSET, \
+						COMPHY_UNIT_ID_LEN)
+#define COMPHY_MODE_OFFSET	(COMPHY_UNIT_ID_OFFSET + COMPHY_UNIT_ID_LEN)
+#define COMPHY_MODE_LEN		5
+#define COMPHY_MODE_MASK	COMPHY_MASK(COMPHY_MODE_OFFSET, COMPHY_MODE_LEN)
+#define COMPHY_CLK_SRC_OFFSET	(COMPHY_MODE_OFFSET + COMPHY_MODE_LEN)
+#define COMPHY_CLK_SRC_LEN	1
+#define COMPHY_CLK_SRC_MASK	COMPHY_MASK(COMPHY_CLK_SRC_OFFSET, \
+						COMPHY_CLK_SRC_LEN)
+#define COMPHY_PCI_WIDTH_OFFSET	(COMPHY_CLK_SRC_OFFSET + COMPHY_CLK_SRC_LEN)
+#define COMPHY_PCI_WIDTH_LEN	3
+#define COMPHY_PCI_WIDTH_MASK	COMPHY_MASK(COMPHY_PCI_WIDTH_OFFSET, \
+						COMPHY_PCI_WIDTH_LEN)
+
+#define COMPHY_MASK(offset, len)	(((1 << (len)) - 1) << (offset))
+
+/* Macro which extracts mode from lane description */
+#define COMPHY_GET_MODE(x)		(((x) & COMPHY_MODE_MASK) >> \
+						COMPHY_MODE_OFFSET)
+/* Macro which extracts unit index from lane description */
+#define COMPHY_GET_ID(x)		(((x) & COMPHY_UNIT_ID_MASK) >> \
+						COMPHY_UNIT_ID_OFFSET)
+/* Macro which extracts speed from lane description */
+#define COMPHY_GET_SPEED(x)		(((x) & COMPHY_SPEED_MASK) >> \
+						COMPHY_SPEED_OFFSET)
+/* Macro which extracts clock source indication from lane description */
+#define COMPHY_GET_CLK_SRC(x)		(((x) & COMPHY_CLK_SRC_MASK) >> \
+						COMPHY_CLK_SRC_OFFSET)
+/* Macro which extracts pcie width indication from lane description */
+#define COMPHY_GET_PCIE_WIDTH(x)	(((x) & COMPHY_PCI_WIDTH_MASK) >> \
+						COMPHY_PCI_WIDTH_OFFSET)
+
+#define COMPHY_SATA_MODE	0x1
+#define COMPHY_SGMII_MODE	0x2	/* SGMII 1G */
+#define COMPHY_HS_SGMII_MODE	0x3	/* SGMII 2.5G */
+#define COMPHY_USB3H_MODE	0x4
+#define COMPHY_USB3D_MODE	0x5
+#define COMPHY_PCIE_MODE	0x6
+#define COMPHY_RXAUI_MODE	0x7
+#define COMPHY_XFI_MODE		0x8
+#define COMPHY_SFI_MODE		0x9
+#define COMPHY_USB3_MODE	0xa
+#define COMPHY_AP_MODE		0xb
+
+/* COMPHY speed macro */
+#define COMPHY_SPEED_1_25G		0 /* SGMII 1G */
+#define COMPHY_SPEED_2_5G		1
+#define COMPHY_SPEED_3_125G		2 /* SGMII 2.5G */
+#define COMPHY_SPEED_5G			3
+#define COMPHY_SPEED_5_15625G		4 /* XFI 5G */
+#define COMPHY_SPEED_6G			5
+#define COMPHY_SPEED_10_3125G		6 /* XFI 10G */
+#define COMPHY_SPEED_MAX		0x3F
+/* The  default speed for IO with fixed known speed */
+#define COMPHY_SPEED_DEFAULT		COMPHY_SPEED_MAX
+
+/* Commands for comphy driver */
+#define COMPHY_COMMAND_DIGITAL_PWR_OFF		0x00000001
+#define COMPHY_COMMAND_DIGITAL_PWR_ON		0x00000002
+
+#define COMPHY_PIPE_FROM_COMPHY_ADDR(x)	((x & ~0xffffff) + 0x120000)
+
+/* System controller registers */
+#define PCIE_MAC_RESET_MASK_PORT0	BIT(13)
+#define PCIE_MAC_RESET_MASK_PORT1	BIT(11)
+#define PCIE_MAC_RESET_MASK_PORT2	BIT(12)
+#define SYS_CTRL_UINIT_SOFT_RESET_REG	0x268
+#define SYS_CTRL_FROM_COMPHY_ADDR(x)	((x & ~0xffffff) + 0x440000)
+
+/* DFX register spaces */
+#define SAR_RST_PCIE0_CLOCK_CONFIG_CP1_OFFSET	(0)
+#define SAR_RST_PCIE0_CLOCK_CONFIG_CP1_MASK	(0x1 << \
+					SAR_RST_PCIE0_CLOCK_CONFIG_CP1_OFFSET)
+#define SAR_RST_PCIE1_CLOCK_CONFIG_CP1_OFFSET	(1)
+#define SAR_RST_PCIE1_CLOCK_CONFIG_CP1_MASK	(0x1 << \
+					SAR_RST_PCIE1_CLOCK_CONFIG_CP1_OFFSET)
+#define SAR_STATUS_0_REG			200
+#define DFX_FROM_COMPHY_ADDR(x)			((x & ~0xffffff) + DFX_BASE)
+
+/* The same Units Soft Reset Config register are accessed in all PCIe ports
+ * initialization, so a spin lock is defined in case when more than 1 CPUs
+ * resets PCIe MAC and need to access the register in the same time. The spin
+ * lock is shared by all CP110 units.
+ */
+spinlock_t cp110_mac_reset_lock;
+
+enum reg_width_type {
+	REG_16BIT = 0,
+	REG_32BIT,
+};
+
+enum {
+	COMPHY_LANE0 = 0,
+	COMPHY_LANE1,
+	COMPHY_LANE2,
+	COMPHY_LANE3,
+	COMPHY_LANE4,
+	COMPHY_LANE5,
+	COMPHY_LANE_MAX,
+};
+
+/* These values come from the PCI Express Spec */
+enum pcie_link_width {
+	PCIE_LNK_WIDTH_RESRV	= 0x00,
+	PCIE_LNK_X1		= 0x01,
+	PCIE_LNK_X2		= 0x02,
+	PCIE_LNK_X4		= 0x04,
+	PCIE_LNK_X8		= 0x08,
+	PCIE_LNK_X12		= 0x0C,
+	PCIE_LNK_X16		= 0x10,
+	PCIE_LNK_X32		= 0x20,
+	PCIE_LNK_WIDTH_UNKNOWN  = 0xFF,
+};
+
+static inline uint32_t polling_with_timeout(uintptr_t addr,
+					    uint32_t val,
+					    uint32_t mask,
+					    uint32_t usec_timeout,
+					    enum reg_width_type type)
+{
+	uint32_t data;
+
+	do {
+		udelay(1);
+		if (type == REG_16BIT)
+			data = mmio_read_16(addr) & mask;
+		else
+			data = mmio_read_32(addr) & mask;
+	} while (data != val  && --usec_timeout > 0);
+
+	if (usec_timeout == 0)
+		return data;
+
+	return 0;
+}
+
+static inline void reg_set(uintptr_t addr, uint32_t data, uint32_t mask)
+{
+	debug("<atf>: WR to addr = %#010lx, data = %#010x (mask = %#010x) - ",
+	      addr, data, mask);
+	debug("old value = %#010x ==> ", mmio_read_32(addr));
+	mmio_clrsetbits_32(addr, mask, data);
+
+	debug("new val %#010x\n", mmio_read_32(addr));
+}
+
+/* Clear PIPE selector - avoid collision with previous configuration */
+static void mvebu_cp110_comphy_clr_pipe_selector(uint64_t comphy_base,
+						 uint8_t comphy_index)
+{
+	uint32_t reg, mask, field;
+	uint32_t comphy_offset =
+			COMMON_SELECTOR_COMPHYN_FIELD_WIDTH * comphy_index;
+
+	mask = COMMON_SELECTOR_COMPHY_MASK << comphy_offset;
+	reg = mmio_read_32(comphy_base + COMMON_SELECTOR_PIPE_REG_OFFSET);
+	field = reg & mask;
+
+	if (field) {
+		reg &= ~mask;
+		mmio_write_32(comphy_base + COMMON_SELECTOR_PIPE_REG_OFFSET,
+			     reg);
+	}
+}
+
+/* Clear PHY selector - avoid collision with previous configuration */
+static void mvebu_cp110_comphy_clr_phy_selector(uint64_t comphy_base,
+						uint8_t comphy_index)
+{
+	uint32_t reg, mask, field;
+	uint32_t comphy_offset =
+			COMMON_SELECTOR_COMPHYN_FIELD_WIDTH * comphy_index;
+
+	mask = COMMON_SELECTOR_COMPHY_MASK << comphy_offset;
+	reg = mmio_read_32(comphy_base + COMMON_SELECTOR_PHY_REG_OFFSET);
+	field = reg & mask;
+
+	/* Clear comphy selector - if it was already configured.
+	 * (might be that this comphy was configured as PCIe/USB,
+	 * in such case, no need to clear comphy selector because PCIe/USB
+	 * are controlled by hpipe selector).
+	 */
+	if (field) {
+		reg &= ~mask;
+		mmio_write_32(comphy_base + COMMON_SELECTOR_PHY_REG_OFFSET,
+			      reg);
+	}
+}
+
+/* PHY selector configures SATA and Network modes */
+static void mvebu_cp110_comphy_set_phy_selector(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uint32_t reg, mask;
+	uint32_t comphy_offset =
+			COMMON_SELECTOR_COMPHYN_FIELD_WIDTH * comphy_index;
+	int mode;
+
+	/* If phy selector is used the pipe selector should be marked as
+	 * unconnected.
+	 */
+	mvebu_cp110_comphy_clr_pipe_selector(comphy_base, comphy_index);
+
+	/* Comphy mode (compound of the IO mode and id). Here, only the IO mode
+	 * is required to distinguish between SATA and network modes.
+	 */
+	mode = COMPHY_GET_MODE(comphy_mode);
+
+	mask = COMMON_SELECTOR_COMPHY_MASK << comphy_offset;
+	reg = mmio_read_32(comphy_base + COMMON_SELECTOR_PHY_REG_OFFSET);
+	reg &= ~mask;
+
+	/* SATA port 0/1 require the same configuration */
+	if (mode == COMPHY_SATA_MODE) {
+		/* SATA selector values is always 4 */
+		reg |= COMMON_SELECTOR_COMPHYN_SATA << comphy_offset;
+	} else {
+		switch (comphy_index) {
+		case(0):
+		case(1):
+		case(2):
+			/* For comphy 0,1, and 2:
+			 * Network selector value is always 1.
+			 */
+			reg |= COMMON_SELECTOR_COMPHY0_1_2_NETWORK <<
+				comphy_offset;
+			break;
+		case(3):
+			/* For comphy 3:
+			 * 0x1 = RXAUI_Lane1
+			 * 0x2 = SGMII/HS-SGMII Port1
+			 */
+			if (mode == COMPHY_RXAUI_MODE)
+				reg |= COMMON_SELECTOR_COMPHY3_RXAUI <<
+					comphy_offset;
+			else
+				reg |= COMMON_SELECTOR_COMPHY3_SGMII <<
+					comphy_offset;
+			break;
+		case(4):
+			 /* For comphy 4:
+			  * 0x1 = SGMII/HS-SGMII Port1, XFI1/SFI1
+			  * 0x2 = SGMII/HS-SGMII Port0: XFI0/SFI0, RXAUI_Lane0
+			  *
+			  * We want to check if SGMII1/HS_SGMII1 is the
+			  * requested mode in order to determine which value
+			  * should be set (all other modes use the same value)
+			  * so we need to strip the mode, and check the ID
+			  * because we might handle SGMII0/HS_SGMII0 too.
+			  */
+			  /* TODO: need to distinguish between CP110 and CP115
+			   * as SFI1/XFI1 available only for CP115.
+			   */
+			if ((mode == COMPHY_SGMII_MODE ||
+			    mode == COMPHY_HS_SGMII_MODE ||
+			    mode == COMPHY_SFI_MODE) &&
+			    COMPHY_GET_ID(comphy_mode) == 1)
+				reg |= COMMON_SELECTOR_COMPHY4_PORT1 <<
+					comphy_offset;
+			else
+				reg |= COMMON_SELECTOR_COMPHY4_ALL_OTHERS <<
+					comphy_offset;
+			break;
+		case(5):
+			/* For comphy 5:
+			 * 0x1 = SGMII/HS-SGMII Port2
+			 * 0x2 = RXAUI Lane1
+			 */
+			if (mode == COMPHY_RXAUI_MODE)
+				reg |= COMMON_SELECTOR_COMPHY5_RXAUI <<
+					comphy_offset;
+			else
+				reg |= COMMON_SELECTOR_COMPHY5_SGMII <<
+					comphy_offset;
+			break;
+		}
+	}
+
+	mmio_write_32(comphy_base + COMMON_SELECTOR_PHY_REG_OFFSET, reg);
+}
+
+/* PIPE selector configures for PCIe, USB 3.0 Host, and USB 3.0 Device mode */
+static void mvebu_cp110_comphy_set_pipe_selector(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uint32_t reg;
+	uint32_t shift = COMMON_SELECTOR_COMPHYN_FIELD_WIDTH * comphy_index;
+	int mode = COMPHY_GET_MODE(comphy_mode);
+	uint32_t mask = COMMON_SELECTOR_COMPHY_MASK << shift;
+	uint32_t pipe_sel = 0x0;
+
+	/* If pipe selector is used the phy selector should be marked as
+	 * unconnected.
+	 */
+	mvebu_cp110_comphy_clr_phy_selector(comphy_base, comphy_index);
+
+	reg = mmio_read_32(comphy_base + COMMON_SELECTOR_PIPE_REG_OFFSET);
+	reg &= ~mask;
+
+	switch (mode) {
+	case (COMPHY_PCIE_MODE):
+		/* For lanes support PCIE, selector value are all same */
+		pipe_sel = COMMON_SELECTOR_PIPE_COMPHY_PCIE;
+		break;
+
+	case (COMPHY_USB3H_MODE):
+		/* Only lane 1-4 support USB host, selector value is same */
+		if (comphy_index == COMPHY_LANE0 ||
+		    comphy_index == COMPHY_LANE5)
+			ERROR("COMPHY[%d] mode[%d] is invalid\n",
+			      comphy_index, mode);
+		else
+			pipe_sel = COMMON_SELECTOR_PIPE_COMPHY_USBH;
+		break;
+
+	case (COMPHY_USB3D_MODE):
+		/* Lane 1 and 4 support USB device, selector value is same */
+		if (comphy_index == COMPHY_LANE1 ||
+		    comphy_index == COMPHY_LANE4)
+			pipe_sel = COMMON_SELECTOR_PIPE_COMPHY_USBD;
+		else
+			ERROR("COMPHY[%d] mode[%d] is invalid\n", comphy_index,
+			      mode);
+		break;
+
+	default:
+		ERROR("COMPHY[%d] mode[%d] is invalid\n", comphy_index, mode);
+		break;
+	}
+
+	mmio_write_32(comphy_base + COMMON_SELECTOR_PIPE_REG_OFFSET, reg |
+		      (pipe_sel << shift));
+}
+
+int mvebu_cp110_comphy_is_pll_locked(uint64_t comphy_base, uint8_t comphy_index)
+{
+	uintptr_t sd_ip_addr, addr;
+	uint32_t mask, data;
+	int ret = 0;
+
+	debug_enter();
+
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_PLL_TX_MASK &
+		SD_EXTERNAL_STATUS0_PLL_RX_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask,
+				    PLL_LOCK_TIMEOUT, REG_32BIT);
+	if (data != 0) {
+		if (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK)
+			ERROR("RX PLL is not locked\n");
+		if (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK)
+			ERROR("TX PLL is not locked\n");
+
+		ret = -ETIMEDOUT;
+	}
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_cp110_comphy_sata_power_on(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uintptr_t hpipe_addr, sd_ip_addr, comphy_addr;
+	uint32_t mask, data;
+	int ret = 0;
+
+	debug_enter();
+
+	/* configure phy selector for SATA */
+	mvebu_cp110_comphy_set_phy_selector(comphy_base,
+					    comphy_index, comphy_mode);
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+
+	debug(" add hpipe 0x%lx, sd 0x%lx, comphy 0x%lx\n",
+					   hpipe_addr, sd_ip_addr, comphy_addr);
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Set select data  width 40Bit - SATA mode only */
+	reg_set(comphy_addr + COMMON_PHY_CFG6_REG,
+		0x1 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET,
+		COMMON_PHY_CFG6_IF_40_SEL_MASK);
+
+	/* release from hard reset in SD external */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+
+	debug("stage: Comphy configuration\n");
+	/* Start comphy Configuration */
+	/* Set reference clock to comes from group 1 - choose 25Mhz */
+	reg_set(hpipe_addr + HPIPE_MISC_REG,
+		0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET,
+		HPIPE_MISC_REFCLK_SEL_MASK);
+	/* Reference frequency select set 1 (for SATA = 25Mhz) */
+	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+	data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	/* PHY mode select (set SATA = 0x0 */
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x0 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+	/* Set max PHY generation setting - 6Gbps */
+	reg_set(hpipe_addr + HPIPE_INTERFACE_REG,
+		0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET,
+		HPIPE_INTERFACE_GEN_MAX_MASK);
+	/* Set select data  width 40Bit (SEL_BITS[2:0]) */
+	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG,
+		0x2 << HPIPE_LOOPBACK_SEL_OFFSET, HPIPE_LOOPBACK_SEL_MASK);
+
+	debug("stage: Analog parameters from ETP(HW)\n");
+	/* G1 settings */
+	mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+	data = 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
+	data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK;
+	data |= 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK;
+	data |= 0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK;
+	data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
+
+	mask = HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
+	data = 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
+	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
+	data |= 0x2 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
+	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+	data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_MASK;
+	data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET;
+	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_MASK;
+	data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+	/* G2 settings */
+	mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK;
+	data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK;
+	data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK;
+	data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_SELMUFF_MASK;
+	data |= 0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_MASK;
+	data |= 0x1 << HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask);
+
+	/* G3 settings */
+	mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK;
+	data = 0x2 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK;
+	data |= 0x2 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_RX_SELMUFI_MASK;
+	data |= 0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_RX_SELMUFF_MASK;
+	data |= 0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_RX_DFE_EN_MASK;
+	data |= 0x1 << HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_MASK;
+	data |= 0x2 << HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK;
+	data |= 0x0 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SET_1_REG, data, mask);
+
+	/* DTL Control */
+	mask = HPIPE_PWR_CTR_DTL_SQ_DET_EN_MASK;
+	data = 0x1 << HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_CLAMPING_SEL_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_CLK_MODE_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
+
+	/* Trigger sampler enable pulse */
+	mask = HPIPE_SMAPLER_MASK;
+	data = 0x1 << HPIPE_SMAPLER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+	mask = HPIPE_SMAPLER_MASK;
+	data = 0x0 << HPIPE_SMAPLER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+
+	/* VDD Calibration Control 3 */
+	mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+	data = 0x10 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
+	/* DFE Resolution Control */
+	mask = HPIPE_DFE_RES_FORCE_MASK;
+	data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+
+	/* DFE F3-F5 Coefficient Control */
+	mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
+	data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
+	mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK;
+	data = 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask);
+
+	/* G3 Setting 3 */
+	mask = HPIPE_G3_FFE_CAP_SEL_MASK;
+	data = 0xf << HPIPE_G3_FFE_CAP_SEL_OFFSET;
+	mask |= HPIPE_G3_FFE_RES_SEL_MASK;
+	data |= 0x4 << HPIPE_G3_FFE_RES_SEL_OFFSET;
+	mask |= HPIPE_G3_FFE_SETTING_FORCE_MASK;
+	data |= 0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET;
+	mask |= HPIPE_G3_FFE_DEG_RES_LEVEL_MASK;
+	data |= 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET;
+	mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK;
+	data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask);
+
+	/* G3 Setting 4 */
+	mask = HPIPE_G3_DFE_RES_MASK;
+	data = 0x1 << HPIPE_G3_DFE_RES_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask);
+
+	/* Offset Phase Control */
+	mask = HPIPE_OS_PH_OFFSET_MASK;
+	data = 0x61 << HPIPE_OS_PH_OFFSET_OFFSET;
+	mask |= HPIPE_OS_PH_OFFSET_FORCE_MASK;
+	data |= 0x1 << HPIPE_OS_PH_OFFSET_FORCE_OFFSET;
+	mask |= HPIPE_OS_PH_VALID_MASK;
+	data |= 0x0 << HPIPE_OS_PH_VALID_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
+	mask = HPIPE_OS_PH_VALID_MASK;
+	data = 0x1 << HPIPE_OS_PH_VALID_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
+	mask = HPIPE_OS_PH_VALID_MASK;
+	data = 0x0 << HPIPE_OS_PH_VALID_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
+
+	/* Set G1 TX amplitude and TX post emphasis value */
+	mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
+	data = 0x8 << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
+	mask |= HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK;
+	data |= 0x1 << HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET;
+	mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
+	data |= 0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+	mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK;
+	data |= 0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask);
+
+	/* Set G2 TX amplitude and TX post emphasis value */
+	mask = HPIPE_G2_SET_0_G2_TX_AMP_MASK;
+	data = 0xa << HPIPE_G2_SET_0_G2_TX_AMP_OFFSET;
+	mask |= HPIPE_G2_SET_0_G2_TX_AMP_ADJ_MASK;
+	data |= 0x1 << HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET;
+	mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_MASK;
+	data |= 0x2 << HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET;
+	mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_EN_MASK;
+	data |= 0x1 << HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G2_SET_0_REG, data, mask);
+
+	/* Set G3 TX amplitude and TX post emphasis value */
+	mask = HPIPE_G3_SET_0_G3_TX_AMP_MASK;
+	data = 0x1e << HPIPE_G3_SET_0_G3_TX_AMP_OFFSET;
+	mask |= HPIPE_G3_SET_0_G3_TX_AMP_ADJ_MASK;
+	data |= 0x1 << HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET;
+	mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_MASK;
+	data |= 0xe << HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET;
+	mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_EN_MASK;
+	data |= 0x1 << HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET;
+	mask |= HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_MASK;
+	data |= 0x4 << HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET;
+	mask |= HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_MASK;
+	data |= 0x0 << HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SET_0_REG, data, mask);
+
+	/* SERDES External Configuration 2 register */
+	mask = SD_EXTERNAL_CONFIG2_SSC_ENABLE_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG, data, mask);
+
+	/* DFE reset sequence */
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
+		0x1 << HPIPE_PWR_CTR_RST_DFE_OFFSET,
+		HPIPE_PWR_CTR_RST_DFE_MASK);
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
+		0x0 << HPIPE_PWR_CTR_RST_DFE_OFFSET,
+		HPIPE_PWR_CTR_RST_DFE_MASK);
+	/* SW reset for interrupt logic */
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
+		0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET,
+		HPIPE_PWR_CTR_SFT_RST_MASK);
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
+		0x0 << HPIPE_PWR_CTR_SFT_RST_OFFSET,
+		HPIPE_PWR_CTR_SFT_RST_MASK);
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_cp110_comphy_sgmii_power_on(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uintptr_t hpipe_addr, sd_ip_addr, comphy_addr, addr;
+	uint32_t mask, data, sgmii_speed = COMPHY_GET_SPEED(comphy_mode);
+	int ret = 0;
+
+	debug_enter();
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+
+	/* configure phy selector for SGMII */
+	mvebu_cp110_comphy_set_phy_selector(comphy_base, comphy_index,
+					    comphy_mode);
+
+	/* Confiugre the lane */
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK;
+
+	if (sgmii_speed == COMPHY_SPEED_1_25G) {
+		/* SGMII 1G, SerDes speed 1.25G */
+		data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
+		data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
+	} else if (sgmii_speed == COMPHY_SPEED_3_125G) {
+		/* HS SGMII (2.5G), SerDes speed 3.125G */
+		data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
+		data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
+	} else {
+		/* Other rates are not supported */
+		ERROR("unsupported SGMII speed on comphy%d\n", comphy_index);
+		return -EINVAL;
+	}
+
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK;
+	data |= 1 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+	/* Set hard reset */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Release hard reset */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+
+	/* Make sure that 40 data bits is disabled
+	 * This bit is not cleared by reset
+	 */
+	mask = COMMON_PHY_CFG6_IF_40_SEL_MASK;
+	data = 0 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG6_REG, data, mask);
+
+	/* Start comphy Configuration */
+	debug("stage: Comphy configuration\n");
+	/* set reference clock */
+	mask = HPIPE_MISC_REFCLK_SEL_MASK;
+	data = 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
+	/* Power and PLL Control */
+	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+	data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+	/* Loopback register */
+	mask = HPIPE_LOOPBACK_SEL_MASK;
+	data = 0x1 << HPIPE_LOOPBACK_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask);
+	/* rx control 1 */
+	mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK;
+	data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET;
+	mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK;
+	data |= 0x0 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask);
+	/* DTL Control */
+	mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
+	data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
+
+	/* Set analog parameters from ETP(HW) - for now use the default datas */
+	debug("stage: Analog parameters from ETP(HW)\n");
+
+	reg_set(hpipe_addr + HPIPE_G1_SET_0_REG,
+		0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET,
+		HPIPE_G1_SET_0_G1_TX_EMPH1_MASK);
+
+	debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
+	/* SERDES External Configuration */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+	ret = mvebu_cp110_comphy_is_pll_locked(comphy_base, comphy_index);
+	if (ret)
+		return ret;
+
+	/* RX init */
+	mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* check that RX init done */
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_RX_INIT_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask, 100, REG_32BIT);
+	if (data != 0) {
+		ERROR("RX init failed\n");
+		ret = -ETIMEDOUT;
+	}
+
+	debug("stage: RF Reset\n");
+	/* RF Reset */
+	mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_cp110_comphy_xfi_power_on(uint64_t comphy_base,
+					   uint8_t comphy_index,
+					   uint32_t comphy_mode)
+{
+	uintptr_t hpipe_addr, sd_ip_addr, comphy_addr, addr;
+	uint32_t mask, data, speed = COMPHY_GET_SPEED(comphy_mode);
+	int ret = 0;
+
+	debug_enter();
+
+	if ((speed != COMPHY_SPEED_5_15625G) &&
+	     (speed != COMPHY_SPEED_10_3125G) &&
+	     (speed != COMPHY_SPEED_DEFAULT)) {
+		ERROR("comphy:%d: unsupported sfi/xfi speed\n", comphy_index);
+		return -EINVAL;
+	}
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+
+	/* configure phy selector for XFI/SFI */
+	mvebu_cp110_comphy_set_phy_selector(comphy_base, comphy_index,
+					    comphy_mode);
+
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Make sure that 40 data bits is disabled
+	 * This bit is not cleared by reset
+	 */
+	mask = COMMON_PHY_CFG6_IF_40_SEL_MASK;
+	data = 0 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG6_REG, data, mask);
+
+	/* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK;
+	data |= 0xE << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK;
+	data |= 0xE << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK;
+	data |= 0 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+	/* release from hard reset */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+
+	/* Start comphy Configuration */
+	debug("stage: Comphy configuration\n");
+	/* set reference clock */
+	mask = HPIPE_MISC_ICP_FORCE_MASK;
+	data = (speed == COMPHY_SPEED_5_15625G) ?
+		(0x0 << HPIPE_MISC_ICP_FORCE_OFFSET) :
+		(0x1 << HPIPE_MISC_ICP_FORCE_OFFSET);
+	mask |= HPIPE_MISC_REFCLK_SEL_MASK;
+	data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
+	/* Power and PLL Control */
+	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+	data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+	/* Loopback register */
+	mask = HPIPE_LOOPBACK_SEL_MASK;
+	data = 0x1 << HPIPE_LOOPBACK_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask);
+	/* rx control 1 */
+	mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK;
+	data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET;
+	mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK;
+	data |= 0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask);
+	/* DTL Control */
+	mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
+	data = 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
+
+	/* Transmitter/Receiver Speed Divider Force */
+	if (speed == COMPHY_SPEED_5_15625G) {
+		mask = HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_MASK;
+		data = 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET;
+		mask |= HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_MASK;
+		data |= 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET;
+		mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_MASK;
+		data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET;
+		mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK;
+		data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET;
+	} else {
+		mask = HPIPE_TXDIGCK_DIV_FORCE_MASK;
+		data = 0x1 << HPIPE_TXDIGCK_DIV_FORCE_OFFSET;
+	}
+	reg_set(hpipe_addr + HPIPE_SPD_DIV_FORCE_REG, data, mask);
+
+	/* Set analog parameters from ETP(HW) */
+	debug("stage: Analog parameters from ETP(HW)\n");
+	/* SERDES External Configuration 2 */
+	mask = SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG, data, mask);
+	/* 0x7-DFE Resolution control */
+	mask = HPIPE_DFE_RES_FORCE_MASK;
+	data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+	/* 0xd-G1_Setting_0 */
+	if (speed == COMPHY_SPEED_5_15625G) {
+		mask = HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
+		data = 0x6 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+	} else {
+		mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
+		data = 0x1c << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
+		mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
+		data |= 0xe << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+	}
+	reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask);
+	/* Genration 1 setting 2 (G1_Setting_2) */
+	mask = HPIPE_G1_SET_2_G1_TX_EMPH0_MASK;
+	data = 0x0 << HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET;
+	mask |= HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK;
+	data |= 0x1 << HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SET_2_REG, data, mask);
+	/* Transmitter Slew Rate Control register (tx_reg1) */
+	mask = HPIPE_TX_REG1_TX_EMPH_RES_MASK;
+	data = 0x3 << HPIPE_TX_REG1_TX_EMPH_RES_OFFSET;
+	mask |= HPIPE_TX_REG1_SLC_EN_MASK;
+	data |= 0x3f << HPIPE_TX_REG1_SLC_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_REG1_REG, data, mask);
+	/* Impedance Calibration Control register (cal_reg1) */
+	mask = HPIPE_CAL_REG_1_EXT_TXIMP_MASK;
+	data = 0xe << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET;
+	mask |= HPIPE_CAL_REG_1_EXT_TXIMP_EN_MASK;
+	data |= 0x1 << HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_CAL_REG1_REG, data, mask);
+	/* Generation 1 Setting 5 (g1_setting_5) */
+	mask = HPIPE_G1_SETTING_5_G1_ICP_MASK;
+	data = 0 << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTING_5_REG, data, mask);
+
+	/* 0xE-G1_Setting_1 */
+	mask = HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK;
+	data = 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET;
+	if (speed == COMPHY_SPEED_5_15625G) {
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+		data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
+		data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
+	} else {
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+		data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
+		data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK;
+		data |= 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK;
+		data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
+		mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK;
+		data |= 0x3 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET;
+	}
+	reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
+
+	/* 0xA-DFE_Reg3 */
+	mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
+	data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
+	mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK;
+	data |= 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask);
+
+	/* 0x111-G1_Setting_4 */
+	mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK;
+	data = 0x1 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
+	/* Genration 1 setting 3 (G1_Setting_3) */
+	mask = HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK;
+	data = 0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET;
+	if (speed == COMPHY_SPEED_5_15625G) {
+		/* Force FFE (Feed Forward Equalization) to 5G */
+		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
+		data |= 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
+		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
+		data |= 0x4 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
+		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+		data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+	}
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+	/* Connfigure RX training timer */
+	mask = HPIPE_RX_TRAIN_TIMER_MASK;
+	data = 0x13 << HPIPE_RX_TRAIN_TIMER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_5_REG, data, mask);
+
+	/* Enable TX train peak to peak hold */
+	mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK;
+	data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_0_REG, data, mask);
+
+	/* Configure TX preset index */
+	mask = HPIPE_TX_PRESET_INDEX_MASK;
+	data = 0x2 << HPIPE_TX_PRESET_INDEX_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_PRESET_INDEX_REG, data, mask);
+
+	/* Disable pattern lock lost timeout */
+	mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK;
+	data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask);
+
+	/* Configure TX training pattern and TX training 16bit auto */
+	mask = HPIPE_TX_TRAIN_16BIT_AUTO_EN_MASK;
+	data = 0x1 << HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET;
+	mask |= HPIPE_TX_TRAIN_PAT_SEL_MASK;
+	data |= 0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_REG, data, mask);
+
+	/* Configure Training patten number */
+	mask = HPIPE_TRAIN_PAT_NUM_MASK;
+	data = 0x88 << HPIPE_TRAIN_PAT_NUM_OFFSET;
+	reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_0_REG, data, mask);
+
+	/* Configure differencial manchester encoter to ethernet mode */
+	mask = HPIPE_DME_ETHERNET_MODE_MASK;
+	data = 0x1 << HPIPE_DME_ETHERNET_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DME_REG, data, mask);
+
+	/* Configure VDD Continuous Calibration */
+	mask = HPIPE_CAL_VDD_CONT_MODE_MASK;
+	data = 0x1 << HPIPE_CAL_VDD_CONT_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_VDD_CAL_0_REG, data, mask);
+
+	/* Trigger sampler enable pulse (by toggleing the bit) */
+	mask = HPIPE_RX_SAMPLER_OS_GAIN_MASK;
+	data = 0x3 << HPIPE_RX_SAMPLER_OS_GAIN_OFFSET;
+	mask |= HPIPE_SMAPLER_MASK;
+	data |= 0x1 << HPIPE_SMAPLER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+	mask = HPIPE_SMAPLER_MASK;
+	data = 0x0 << HPIPE_SMAPLER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+
+	/* Set External RX Regulator Control */
+	mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+	data = 0x1A << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
+	debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
+	/* SERDES External Configuration */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+	/* check PLL rx & tx ready */
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_PLL_RX_MASK |
+	       SD_EXTERNAL_STATUS0_PLL_TX_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask,
+				    PLL_LOCK_TIMEOUT, REG_32BIT);
+	if (data != 0) {
+		if (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK)
+			ERROR("RX PLL is not locked\n");
+		if (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK)
+			ERROR("TX PLL is not locked\n");
+
+		ret = -ETIMEDOUT;
+	}
+
+	/* RX init */
+	mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* check that RX init done */
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_RX_INIT_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask, 100, REG_32BIT);
+	if (data != 0) {
+		ERROR("RX init failed\n");
+		ret = -ETIMEDOUT;
+	}
+
+	debug("stage: RF Reset\n");
+	/* RF Reset */
+	mask =  SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_cp110_comphy_pcie_power_on(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	int ret = 0;
+	uint32_t reg, mask, data, pcie_width;
+	uint32_t clk_dir;
+	uintptr_t hpipe_addr, comphy_addr, addr;
+	_Bool clk_src = COMPHY_GET_CLK_SRC(comphy_mode);
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+	pcie_width = COMPHY_GET_PCIE_WIDTH(comphy_mode);
+
+	debug_enter();
+
+	spin_lock(&cp110_mac_reset_lock);
+
+	reg = mmio_read_32(SYS_CTRL_FROM_COMPHY_ADDR(comphy_base) +
+						SYS_CTRL_UINIT_SOFT_RESET_REG);
+	switch (comphy_index) {
+	case COMPHY_LANE0:
+		reg |= PCIE_MAC_RESET_MASK_PORT0;
+		break;
+	case COMPHY_LANE4:
+		reg |= PCIE_MAC_RESET_MASK_PORT1;
+		break;
+	case COMPHY_LANE5:
+		reg |= PCIE_MAC_RESET_MASK_PORT2;
+		break;
+	}
+
+	mmio_write_32(SYS_CTRL_FROM_COMPHY_ADDR(comphy_base) +
+					    SYS_CTRL_UINIT_SOFT_RESET_REG, reg);
+	spin_unlock(&cp110_mac_reset_lock);
+
+	/* Configure PIPE selector for PCIE */
+	mvebu_cp110_comphy_set_pipe_selector(comphy_base, comphy_index,
+					     comphy_mode);
+
+	/*
+	 * Read SAR (Sample-At-Reset) configuration for the PCIe clock
+	 * direction.
+	 *
+	 * SerDes Lane 4/5 got the PCIe ref-clock #1,
+	 * and SerDes Lane 0 got PCIe ref-clock #0
+	 */
+	reg = mmio_read_32(DFX_FROM_COMPHY_ADDR(comphy_base) +
+			   SAR_STATUS_0_REG);
+	if (comphy_index == COMPHY_LANE4 || comphy_index == COMPHY_LANE5)
+		clk_dir = (reg & SAR_RST_PCIE1_CLOCK_CONFIG_CP1_MASK) >>
+					  SAR_RST_PCIE1_CLOCK_CONFIG_CP1_OFFSET;
+	else
+		clk_dir = (reg & SAR_RST_PCIE0_CLOCK_CONFIG_CP1_MASK) >>
+					  SAR_RST_PCIE0_CLOCK_CONFIG_CP1_OFFSET;
+
+	debug("On lane %d\n", comphy_index);
+	debug("PCIe clock direction = %x\n", clk_dir);
+	debug("PCIe Width = %d\n", pcie_width);
+
+	/* enable PCIe X4 and X2 */
+	if (comphy_index == COMPHY_LANE0) {
+		if (pcie_width == PCIE_LNK_X4) {
+			data = 0x1 << COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET;
+			mask = COMMON_PHY_SD_CTRL1_PCIE_X4_EN_MASK;
+			reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
+				data, mask);
+		} else if (pcie_width == PCIE_LNK_X2) {
+			data = 0x1 << COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET;
+			mask = COMMON_PHY_SD_CTRL1_PCIE_X2_EN_MASK;
+			reg_set(comphy_base + COMMON_PHY_SD_CTRL1, data, mask);
+		}
+	}
+
+	/* If PCIe clock is output and clock source from SerDes lane 5,
+	 * need to configure the clock-source MUX.
+	 * By default, the clock source is from lane 4
+	 */
+	if (clk_dir && clk_src && (comphy_index == COMPHY_LANE5)) {
+		data = DFX_DEV_GEN_PCIE_CLK_SRC_MUX <<
+						DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET;
+		mask = DFX_DEV_GEN_PCIE_CLK_SRC_MASK;
+		reg_set(DFX_FROM_COMPHY_ADDR(comphy_base) +
+			DFX_DEV_GEN_CTRL12_REG, data, mask);
+	}
+
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	mask |= COMMON_PHY_PHY_MODE_MASK;
+	data |= 0x0 << COMMON_PHY_PHY_MODE_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* release from hard reset */
+	mask = COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+	/* Start comphy Configuration */
+	debug("stage: Comphy configuration\n");
+	/* Set PIPE soft reset */
+	mask = HPIPE_RST_CLK_CTRL_PIPE_RST_MASK;
+	data = 0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET;
+	/* Set PHY datapath width mode for V0 */
+	mask |= HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK;
+	data |= 0x1 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET;
+	/* Set Data bus width USB mode for V0 */
+	mask |= HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK;
+	data |= 0x0 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET;
+	/* Set CORE_CLK output frequency for 250Mhz */
+	mask |= HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK;
+	data |= 0x0 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, data, mask);
+	/* Set PLL ready delay for 0x2 */
+	data = 0x2 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET;
+	mask = HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK;
+	if (pcie_width != PCIE_LNK_X1) {
+		data |= 0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET;
+		mask |= HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_MASK;
+		data |= 0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET;
+		mask |= HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_MASK;
+	}
+	reg_set(hpipe_addr + HPIPE_CLK_SRC_LO_REG, data, mask);
+
+	/* Set PIPE mode interface to PCIe3 - 0x1  & set lane order */
+	data = 0x1 << HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET;
+	mask = HPIPE_CLK_SRC_HI_MODE_PIPE_MASK;
+	if (pcie_width != PCIE_LNK_X1) {
+		mask |= HPIPE_CLK_SRC_HI_LANE_STRT_MASK;
+		mask |= HPIPE_CLK_SRC_HI_LANE_MASTER_MASK;
+		mask |= HPIPE_CLK_SRC_HI_LANE_BREAK_MASK;
+		if (comphy_index == 0) {
+			data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET;
+			data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET;
+		} else if (comphy_index == (pcie_width - 1)) {
+			data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET;
+		}
+	}
+	reg_set(hpipe_addr + HPIPE_CLK_SRC_HI_REG, data, mask);
+	/* Config update polarity equalization */
+	data = 0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET;
+	mask = HPIPE_CFG_UPDATE_POLARITY_MASK;
+	reg_set(hpipe_addr + HPIPE_LANE_EQ_CFG1_REG, data, mask);
+	/* Set PIPE version 4 to mode enable */
+	data = 0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET;
+	mask = HPIPE_DFE_CTRL_28_PIPE4_MASK;
+	reg_set(hpipe_addr + HPIPE_DFE_CTRL_28_REG, data, mask);
+	/* TODO: check if pcie clock is output/input - for bringup use input*/
+	/* Enable PIN clock 100M_125M */
+	mask = 0;
+	data = 0;
+	/* Only if clock is output, configure the clock-source mux */
+	if (clk_dir) {
+		mask |= HPIPE_MISC_CLK100M_125M_MASK;
+		data |= 0x1 << HPIPE_MISC_CLK100M_125M_OFFSET;
+	}
+	/* Set PIN_TXDCLK_2X Clock Freq. Selection for outputs 500MHz clock */
+	mask |= HPIPE_MISC_TXDCLK_2X_MASK;
+	data |= 0x0 << HPIPE_MISC_TXDCLK_2X_OFFSET;
+	/* Enable 500MHz Clock */
+	mask |= HPIPE_MISC_CLK500_EN_MASK;
+	data |= 0x1 << HPIPE_MISC_CLK500_EN_OFFSET;
+	if (clk_dir) { /* output */
+		/* Set reference clock comes from group 1 */
+		mask |= HPIPE_MISC_REFCLK_SEL_MASK;
+		data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
+	} else {
+		/* Set reference clock comes from group 2 */
+		mask |= HPIPE_MISC_REFCLK_SEL_MASK;
+		data |= 0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET;
+	}
+	mask |= HPIPE_MISC_ICP_FORCE_MASK;
+	data |= 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
+	if (clk_dir) { /* output */
+		/* Set reference frequcency select - 0x2 for 25MHz*/
+		mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+		data = 0x2 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	} else {
+		/* Set reference frequcency select - 0x0 for 100MHz*/
+		mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+		data = 0x0 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	}
+	/* Set PHY mode to PCIe */
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x3 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+
+	/* ref clock alignment */
+	if (pcie_width != PCIE_LNK_X1) {
+		mask = HPIPE_LANE_ALIGN_OFF_MASK;
+		data = 0x0 << HPIPE_LANE_ALIGN_OFF_OFFSET;
+		reg_set(hpipe_addr + HPIPE_LANE_ALIGN_REG, data, mask);
+	}
+
+	/* Set the amount of time spent in the LoZ state - set for 0x7 only if
+	 * the PCIe clock is output
+	 */
+	if (clk_dir)
+		reg_set(hpipe_addr + HPIPE_GLOBAL_PM_CTRL,
+			0x7 << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET,
+			HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK);
+
+	/* Set Maximal PHY Generation Setting(8Gbps) */
+	mask = HPIPE_INTERFACE_GEN_MAX_MASK;
+	data = 0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET;
+	/* Bypass frame detection and sync detection for RX DATA */
+	mask |= HPIPE_INTERFACE_DET_BYPASS_MASK;
+	data |= 0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET;
+	/* Set Link Train Mode (Tx training control pins are used) */
+	mask |= HPIPE_INTERFACE_LINK_TRAIN_MASK;
+	data |= 0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_INTERFACE_REG, data, mask);
+
+	/* Set Idle_sync enable */
+	mask = HPIPE_PCIE_IDLE_SYNC_MASK;
+	data = 0x1 << HPIPE_PCIE_IDLE_SYNC_OFFSET;
+	/* Select bits for PCIE Gen3(32bit) */
+	mask |= HPIPE_PCIE_SEL_BITS_MASK;
+	data |= 0x2 << HPIPE_PCIE_SEL_BITS_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PCIE_REG0, data, mask);
+
+	/* Enable Tx_adapt_g1 */
+	mask = HPIPE_TX_TRAIN_CTRL_G1_MASK;
+	data = 0x1 << HPIPE_TX_TRAIN_CTRL_G1_OFFSET;
+	/* Enable Tx_adapt_gn1 */
+	mask |= HPIPE_TX_TRAIN_CTRL_GN1_MASK;
+	data |= 0x1 << HPIPE_TX_TRAIN_CTRL_GN1_OFFSET;
+	/* Disable Tx_adapt_g0 */
+	mask |= HPIPE_TX_TRAIN_CTRL_G0_MASK;
+	data |= 0x0 << HPIPE_TX_TRAIN_CTRL_G0_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_REG, data, mask);
+
+	/* Set reg_tx_train_chk_init */
+	mask = HPIPE_TX_TRAIN_CHK_INIT_MASK;
+	data = 0x0 << HPIPE_TX_TRAIN_CHK_INIT_OFFSET;
+	/* Enable TX_COE_FM_PIN_PCIE3_EN */
+	mask |= HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK;
+	data |= 0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_REG, data, mask);
+
+	debug("stage: TRx training parameters\n");
+	/* Set Preset sweep configurations */
+	mask = HPIPE_TX_TX_STATUS_CHECK_MODE_MASK;
+	data = 0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET;
+	mask |= HPIPE_TX_NUM_OF_PRESET_MASK;
+	data |= 0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET;
+	mask |= HPIPE_TX_SWEEP_PRESET_EN_MASK;
+	data |= 0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_11_REG, data, mask);
+
+	/* Tx train start configuration */
+	mask = HPIPE_TX_TRAIN_START_SQ_EN_MASK;
+	data = 0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET;
+	mask |= HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK;
+	data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET;
+	mask |= HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK;
+	data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET;
+	mask |= HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK;
+	data |= 0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_5_REG, data, mask);
+
+	/* Enable Tx train P2P */
+	mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK;
+	data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_0_REG, data, mask);
+
+	/* Configure Tx train timeout */
+	mask = HPIPE_TRX_TRAIN_TIMER_MASK;
+	data = 0x17 << HPIPE_TRX_TRAIN_TIMER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_4_REG, data, mask);
+
+	/* Disable G0/G1/GN1 adaptation */
+	mask = HPIPE_TX_TRAIN_CTRL_G1_MASK | HPIPE_TX_TRAIN_CTRL_GN1_MASK
+		| HPIPE_TX_TRAIN_CTRL_G0_OFFSET;
+	data = 0;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_REG, data, mask);
+
+	/* Disable DTL frequency loop */
+	mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
+	data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
+
+	/* Configure G3 DFE */
+	mask = HPIPE_G3_DFE_RES_MASK;
+	data = 0x3 << HPIPE_G3_DFE_RES_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask);
+
+	/* Use TX/RX training result for DFE */
+	mask = HPIPE_DFE_RES_FORCE_MASK;
+	data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_REG0,  data, mask);
+
+	/* Configure initial and final coefficient value for receiver */
+	mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK;
+	data = 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET;
+
+	mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK;
+	data |= 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET;
+
+	mask |= HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK;
+	data |= 0x0 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SET_1_REG,  data, mask);
+
+	/* Trigger sampler enable pulse */
+	mask = HPIPE_SMAPLER_MASK;
+	data = 0x1 << HPIPE_SMAPLER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+	udelay(5);
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, 0, mask);
+
+	/* FFE resistor tuning for different bandwidth  */
+	mask = HPIPE_G3_FFE_DEG_RES_LEVEL_MASK;
+	data = 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET;
+	mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK;
+	data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask);
+
+	/* Pattern lock lost timeout disable */
+	mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK;
+	data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask);
+
+	/* Configure DFE adaptations */
+	mask = HPIPE_CDR_RX_MAX_DFE_ADAPT_0_MASK;
+	data = 0x0 << HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET;
+	mask |= HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK;
+	data |= 0x0 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET;
+	mask |= HPIPE_CDR_MAX_DFE_ADAPT_0_MASK;
+	data |= 0x0 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET;
+	mask |= HPIPE_CDR_MAX_DFE_ADAPT_1_MASK;
+	data |= 0x1 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET;
+	reg_set(hpipe_addr + HPIPE_CDR_CONTROL_REG, data, mask);
+
+	mask = HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK;
+	data = 0x0 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_CONTROL_REG, data, mask);
+
+	/* Genration 2 setting 1*/
+	mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK;
+	data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK;
+	data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK;
+	data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask);
+
+	/* DFE enable */
+	mask = HPIPE_G2_DFE_RES_MASK;
+	data = 0x3 << HPIPE_G2_DFE_RES_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G2_SETTINGS_4_REG, data, mask);
+
+	/* Configure DFE Resolution */
+	mask = HPIPE_LANE_CFG4_DFE_EN_SEL_MASK;
+	data = 0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask);
+
+	/* VDD calibration control */
+	mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+	data = 0x16 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
+	/* Set PLL Charge-pump Current Control */
+	mask = HPIPE_G3_SETTING_5_G3_ICP_MASK;
+	data = 0x4 << HPIPE_G3_SETTING_5_G3_ICP_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SETTING_5_REG, data, mask);
+
+	/* Set lane rqualization remote setting */
+	mask = HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK;
+	data = 0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET;
+	mask |= HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK;
+	data |= 0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET;
+	mask |= HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK;
+	data |= 0x6 << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LANE_EQ_REMOTE_SETTING_REG, data, mask);
+
+	mask = HPIPE_CFG_EQ_BUNDLE_DIS_MASK;
+	data = 0x1 << HPIPE_CFG_EQ_BUNDLE_DIS_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LANE_EQ_CFG2_REG, data, mask);
+
+	debug("stage: Comphy power up\n");
+
+	/* For PCIe X4 or X2:
+	 * release from reset only after finish to configure all lanes
+	 */
+	if ((pcie_width == PCIE_LNK_X1) || (comphy_index == (pcie_width - 1))) {
+		uint32_t i, start_lane, end_lane;
+
+		if (pcie_width != PCIE_LNK_X1) {
+			/* allows writing to all lanes in one write */
+			data = 0x0;
+			if (pcie_width == PCIE_LNK_X2)
+				mask = COMMON_PHY_SD_CTRL1_COMPHY_0_1_PORT_MASK;
+			else if (pcie_width == PCIE_LNK_X4)
+				mask = COMMON_PHY_SD_CTRL1_COMPHY_0_3_PORT_MASK;
+			reg_set(comphy_base + COMMON_PHY_SD_CTRL1, data, mask);
+			start_lane = 0;
+			end_lane = pcie_width;
+
+			/* Release from PIPE soft reset
+			 * For PCIe by4 or by2:
+			 * release from soft reset all lanes - can't use
+			 * read modify write
+			 */
+			reg_set(HPIPE_ADDR(
+				COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base), 0) +
+				HPIPE_RST_CLK_CTRL_REG, 0x24, 0xffffffff);
+		} else {
+			start_lane = comphy_index;
+			end_lane = comphy_index + 1;
+
+			/* Release from PIPE soft reset
+			 * for PCIe by4 or by2:
+			 * release from soft reset all lanes
+			 */
+			reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG,
+				0x0 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET,
+				HPIPE_RST_CLK_CTRL_PIPE_RST_MASK);
+		}
+
+		if (pcie_width != PCIE_LNK_X1) {
+			/* disable writing to all lanes with one write */
+			if (pcie_width == PCIE_LNK_X2) {
+				data = (COMPHY_LANE0 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_0_PORT_OFFSET) |
+				(COMPHY_LANE1 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_1_PORT_OFFSET);
+				mask = COMMON_PHY_SD_CTRL1_COMPHY_0_1_PORT_MASK;
+			} else if (pcie_width == PCIE_LNK_X4) {
+				data = (COMPHY_LANE0 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_0_PORT_OFFSET) |
+				(COMPHY_LANE1 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_1_PORT_OFFSET) |
+				(COMPHY_LANE2 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_2_PORT_OFFSET) |
+				(COMPHY_LANE3 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_3_PORT_OFFSET);
+				mask = COMMON_PHY_SD_CTRL1_COMPHY_0_3_PORT_MASK;
+			}
+			reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
+				data, mask);
+		}
+
+		debug("stage: Check PLL\n");
+		/* Read lane status */
+		for (i = start_lane; i < end_lane; i++) {
+			addr = HPIPE_ADDR(
+				COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base), i) +
+				HPIPE_LANE_STATUS1_REG;
+			data = HPIPE_LANE_STATUS1_PCLK_EN_MASK;
+			mask = data;
+			ret = polling_with_timeout(addr, data, mask,
+						   PLL_LOCK_TIMEOUT,
+						   REG_32BIT);
+			if (ret)
+				ERROR("Failed to lock PCIE PLL\n");
+		}
+	}
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_cp110_comphy_rxaui_power_on(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uintptr_t hpipe_addr, sd_ip_addr, comphy_addr, addr;
+	uint32_t mask, data;
+	int ret = 0;
+
+	debug_enter();
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+
+	/* configure phy selector for RXAUI */
+	mvebu_cp110_comphy_set_phy_selector(comphy_base, comphy_index,
+					    comphy_mode);
+
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	if (comphy_index == 2) {
+		reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
+			0x1 << COMMON_PHY_SD_CTRL1_RXAUI0_OFFSET,
+			COMMON_PHY_SD_CTRL1_RXAUI0_MASK);
+	}
+	if (comphy_index == 4) {
+		reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
+			0x1 << COMMON_PHY_SD_CTRL1_RXAUI1_OFFSET,
+			COMMON_PHY_SD_CTRL1_RXAUI1_MASK);
+	}
+
+	/* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK;
+	data |= 0xB << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK;
+	data |= 0xB << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_MEDIA_MODE_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_MEDIA_MODE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+	/* release from hard reset */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+
+	/* Start comphy Configuration */
+	debug("stage: Comphy configuration\n");
+	/* set reference clock */
+	reg_set(hpipe_addr + HPIPE_MISC_REG,
+		0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET,
+		HPIPE_MISC_REFCLK_SEL_MASK);
+	/* Power and PLL Control */
+	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+	data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+	/* Loopback register */
+	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG,
+		0x1 << HPIPE_LOOPBACK_SEL_OFFSET, HPIPE_LOOPBACK_SEL_MASK);
+	/* rx control 1 */
+	mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK;
+	data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET;
+	mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK;
+	data |= 0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask);
+	/* DTL Control */
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG,
+		0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET,
+		HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK);
+
+	/* Set analog parameters from ETP(HW) */
+	debug("stage: Analog parameters from ETP(HW)\n");
+	/* SERDES External Configuration 2 */
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG,
+		0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET,
+		SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK);
+	/* 0x7-DFE Resolution control */
+	reg_set(hpipe_addr + HPIPE_DFE_REG0, 0x1 << HPIPE_DFE_RES_FORCE_OFFSET,
+		HPIPE_DFE_RES_FORCE_MASK);
+	/* 0xd-G1_Setting_0 */
+	reg_set(hpipe_addr + HPIPE_G1_SET_0_REG,
+		0xd << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET,
+		HPIPE_G1_SET_0_G1_TX_EMPH1_MASK);
+	/* 0xE-G1_Setting_1 */
+	mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+	data = 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
+	data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK;
+	data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
+	/* 0xA-DFE_Reg3 */
+	mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
+	data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
+	mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK;
+	data |= 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask);
+
+	/* 0x111-G1_Setting_4 */
+	mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK;
+	data = 0x1 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
+
+	debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
+	/* SERDES External Configuration */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+
+	/* check PLL rx & tx ready */
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_PLL_RX_MASK |
+		SD_EXTERNAL_STATUS0_PLL_TX_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask, 15000, REG_32BIT);
+	if (data != 0) {
+		debug("Read from reg = %lx - value = 0x%x\n",
+		      sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
+		ERROR("SD_EXTERNAL_STATUS0_PLL_RX is %d, -\"-_PLL_TX is %d\n",
+		      (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
+		      (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
+		ret = -ETIMEDOUT;
+	}
+
+	/* RX init */
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG,
+		0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET,
+		SD_EXTERNAL_CONFIG1_RX_INIT_MASK);
+
+	/* check that RX init done */
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_RX_INIT_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask, 100, REG_32BIT);
+	if (data != 0) {
+		debug("Read from reg = %lx - value = 0x%x\n",
+		      sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
+		ERROR("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
+		ret = -ETIMEDOUT;
+	}
+
+	debug("stage: RF Reset\n");
+	/* RF Reset */
+	mask =  SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_cp110_comphy_usb3_power_on(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uintptr_t hpipe_addr, comphy_addr, addr;
+	uint32_t mask, data;
+	int ret = 0;
+
+	debug_enter();
+
+	/* Configure PIPE selector for USB3 */
+	mvebu_cp110_comphy_set_pipe_selector(comphy_base, comphy_index,
+					     comphy_mode);
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	mask |= COMMON_PHY_PHY_MODE_MASK;
+	data |= 0x1 << COMMON_PHY_PHY_MODE_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* release from hard reset */
+	mask = COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+
+	/* Start comphy Configuration */
+	debug("stage: Comphy configuration\n");
+	/* Set PIPE soft reset */
+	mask = HPIPE_RST_CLK_CTRL_PIPE_RST_MASK;
+	data = 0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET;
+	/* Set PHY datapath width mode for V0 */
+	mask |= HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK;
+	data |= 0x0 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET;
+	/* Set Data bus width USB mode for V0 */
+	mask |= HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK;
+	data |= 0x0 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET;
+	/* Set CORE_CLK output frequency for 250Mhz */
+	mask |= HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK;
+	data |= 0x0 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, data, mask);
+	/* Set PLL ready delay for 0x2 */
+	reg_set(hpipe_addr + HPIPE_CLK_SRC_LO_REG,
+		0x2 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET,
+		HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK);
+	/* Set reference clock to come from group 1 - 25Mhz */
+	reg_set(hpipe_addr + HPIPE_MISC_REG,
+		0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET,
+		HPIPE_MISC_REFCLK_SEL_MASK);
+	/* Set reference frequcency select - 0x2 */
+	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+	data = 0x2 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	/* Set PHY mode to USB - 0x5 */
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x5 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+	/* Set the amount of time spent in the LoZ state - set for 0x7 */
+	reg_set(hpipe_addr + HPIPE_GLOBAL_PM_CTRL,
+		0x7 << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET,
+		HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK);
+	/* Set max PHY generation setting - 5Gbps */
+	reg_set(hpipe_addr + HPIPE_INTERFACE_REG,
+		0x1 << HPIPE_INTERFACE_GEN_MAX_OFFSET,
+		HPIPE_INTERFACE_GEN_MAX_MASK);
+	/* Set select data width 20Bit (SEL_BITS[2:0]) */
+	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG,
+		0x1 << HPIPE_LOOPBACK_SEL_OFFSET,
+		HPIPE_LOOPBACK_SEL_MASK);
+	/* select de-emphasize 3.5db */
+	reg_set(hpipe_addr + HPIPE_LANE_CONFIG0_REG,
+		0x1 << HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET,
+		HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK);
+	/* override tx margining from the MAC */
+	reg_set(hpipe_addr + HPIPE_TST_MODE_CTRL_REG,
+		0x1 << HPIPE_TST_MODE_CTRL_MODE_MARGIN_OFFSET,
+		HPIPE_TST_MODE_CTRL_MODE_MARGIN_MASK);
+
+	/* Start analog parameters from ETP(HW) */
+	debug("stage: Analog parameters from ETP(HW)\n");
+	/* Set Pin DFE_PAT_DIS -> Bit[1]: PIN_DFE_PAT_DIS = 0x0 */
+	mask = HPIPE_LANE_CFG4_DFE_CTRL_MASK;
+	data = 0x1 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET;
+	/* Set Override PHY DFE control pins for 0x1 */
+	mask |= HPIPE_LANE_CFG4_DFE_OVER_MASK;
+	data |= 0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET;
+	/* Set Spread Spectrum Clock Enable fot 0x1 */
+	mask |= HPIPE_LANE_CFG4_SSC_CTRL_MASK;
+	data |= 0x1 << HPIPE_LANE_CFG4_SSC_CTRL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask);
+	/* Confifure SSC amplitude */
+	mask = HPIPE_G2_TX_SSC_AMP_MASK;
+	data = 0x1f << HPIPE_G2_TX_SSC_AMP_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G2_SET_2_REG, data, mask);
+	/* End of analog parameters */
+
+	debug("stage: Comphy power up\n");
+	/* Release from PIPE soft reset */
+	reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG,
+		0x0 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET,
+		HPIPE_RST_CLK_CTRL_PIPE_RST_MASK);
+
+	/* wait 15ms - for comphy calibration done */
+	debug("stage: Check PLL\n");
+	/* Read lane status */
+	addr = hpipe_addr + HPIPE_LANE_STATUS1_REG;
+	data = HPIPE_LANE_STATUS1_PCLK_EN_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask, 15000, REG_32BIT);
+	if (data != 0) {
+		debug("Read from reg = %lx - value = 0x%x\n",
+			hpipe_addr + HPIPE_LANE_STATUS1_REG, data);
+		ERROR("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
+		ret = -ETIMEDOUT;
+	}
+
+	debug_exit();
+
+	return ret;
+}
+
+/* This function performs RX training for one Feed Forward Equalization (FFE)
+ * value.
+ * The RX traiing result is stored in 'Saved DFE values Register' (SAV_F0D).
+ *
+ * Return '0' on success, error code in  a case of failure.
+ */
+static int mvebu_cp110_comphy_test_single_ffe(uint64_t comphy_base,
+					      uint8_t comphy_index,
+					      uint32_t ffe, uint32_t *result)
+{
+	uint32_t mask, data, timeout;
+	uintptr_t hpipe_addr, sd_ip_addr;
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+
+	/* Configure PRBS counters */
+	mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
+	data = 0xe << HPIPE_PHY_TEST_PATTERN_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
+
+	mask = HPIPE_PHY_TEST_DATA_MASK;
+	data = 0x64 << HPIPE_PHY_TEST_DATA_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PHY_TEST_DATA_REG, data, mask);
+
+	mask = HPIPE_PHY_TEST_EN_MASK;
+	data = 0x1 << HPIPE_PHY_TEST_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
+
+	mdelay(50);
+
+	/* Set the FFE value */
+	mask = HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
+	data = ffe << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+	/* Start RX training */
+	mask = SD_EXTERNAL_STATUS_START_RX_TRAINING_MASK;
+	data = 1 << SD_EXTERNAL_STATUS_START_RX_TRAINING_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_STATUS_REG, data, mask);
+
+	/* Check the result of RX training */
+	timeout = RX_TRAINING_TIMEOUT;
+	while (timeout) {
+		data = mmio_read_32(sd_ip_addr + SD_EXTERNAL_STATAUS1_REG);
+		if (data & SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_COMP_MASK)
+			break;
+		mdelay(1);
+		timeout--;
+	}
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	if (data & SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_FAILED_MASK)
+		return -EINVAL;
+
+	/* Stop RX training */
+	mask = SD_EXTERNAL_STATUS_START_RX_TRAINING_MASK;
+	data = 0 << SD_EXTERNAL_STATUS_START_RX_TRAINING_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_STATUS_REG, data, mask);
+
+	/* Read the result */
+	data = mmio_read_32(hpipe_addr + HPIPE_SAVED_DFE_VALUES_REG);
+	data &= HPIPE_SAVED_DFE_VALUES_SAV_F0D_MASK;
+	data >>= HPIPE_SAVED_DFE_VALUES_SAV_F0D_OFFSET;
+	*result = data;
+
+	mask = HPIPE_PHY_TEST_RESET_MASK;
+	data = 0x1 << HPIPE_PHY_TEST_RESET_OFFSET;
+	mask |= HPIPE_PHY_TEST_EN_MASK;
+	data |= 0x0 << HPIPE_PHY_TEST_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
+
+	mask = HPIPE_PHY_TEST_RESET_MASK;
+	data = 0x0 << HPIPE_PHY_TEST_RESET_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
+
+	return 0;
+}
+
+/* This function runs complete RX training sequence:
+ *	- Run RX training for all possible Feed Forward Equalization values
+ *	- Choose the FFE which gives the best result.
+ *	- Run RX training again with the best result.
+ *
+ * Return '0' on success, error code in  a case of failure.
+ */
+int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
+					      uint8_t comphy_index)
+{
+	uint32_t mask, data, max_rx_train = 0, max_rx_train_index = 0;
+	uintptr_t hpipe_addr;
+	uint32_t rx_train_result;
+	int ret, i;
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+
+	debug_enter();
+
+	/* Configure SQ threshold and CDR lock */
+	mask = HPIPE_SQUELCH_THRESH_IN_MASK;
+	data = 0xc << HPIPE_SQUELCH_THRESH_IN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SQUELCH_FFE_SETTING_REG, data, mask);
+
+	mask = HPIPE_SQ_DEGLITCH_WIDTH_P_MASK;
+	data = 0xf << HPIPE_SQ_DEGLITCH_WIDTH_P_OFFSET;
+	mask |= HPIPE_SQ_DEGLITCH_WIDTH_N_MASK;
+	data |= 0xf << HPIPE_SQ_DEGLITCH_WIDTH_N_OFFSET;
+	mask |= HPIPE_SQ_DEGLITCH_EN_MASK;
+	data |= 0x1 << HPIPE_SQ_DEGLITCH_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SQ_GLITCH_FILTER_CTRL, data, mask);
+
+	mask = HPIPE_CDR_LOCK_DET_EN_MASK;
+	data = 0x1 << HPIPE_CDR_LOCK_DET_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask);
+
+	udelay(100);
+
+	/* Determine if we have a cable attached to this comphy, if not,
+	 * we can't perform RX training.
+	 */
+	data = mmio_read_32(hpipe_addr + HPIPE_SQUELCH_FFE_SETTING_REG);
+	if (data & HPIPE_SQUELCH_DETECTED_MASK) {
+		ERROR("Squelsh is not detected, can't perform RX training\n");
+		return -EINVAL;
+	}
+
+	data = mmio_read_32(hpipe_addr + HPIPE_LOOPBACK_REG);
+	if (!(data & HPIPE_CDR_LOCK_MASK)) {
+		ERROR("CDR is not locked, can't perform RX training\n");
+		return -EINVAL;
+	}
+
+	/* Do preparations for RX training */
+	mask = HPIPE_DFE_RES_FORCE_MASK;
+	data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+
+	mask = HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
+	data = 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
+	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+	data |= 1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+	/* Perform RX training for all possible FFE (Feed Forward
+	 * Equalization, possible values are 0-7).
+	 * We update the best value reached and the FFE which gave this value.
+	 */
+	for (i = 0; i < MAX_NUM_OF_FFE; i++) {
+		rx_train_result = 0;
+		ret = mvebu_cp110_comphy_test_single_ffe(comphy_base,
+							 comphy_index, i,
+							 &rx_train_result);
+
+		if ((!ret) && (rx_train_result > max_rx_train)) {
+			max_rx_train = rx_train_result;
+			max_rx_train_index = i;
+		}
+	}
+
+	/* If we were able to determine which FFE gives the best value,
+	 * now we need to set it and run RX training again (only for this
+	 * FFE).
+	 */
+	if (max_rx_train) {
+		ret = mvebu_cp110_comphy_test_single_ffe(comphy_base,
+							 comphy_index,
+							 max_rx_train_index,
+							 &rx_train_result);
+
+		if (ret == 0)
+			debug("RX Training passed (FFE = %d, result = 0x%x)\n",
+			       max_rx_train_index, rx_train_result);
+	} else {
+		ERROR("RX Training failed for comphy%d\n", comphy_index);
+		ret = -EINVAL;
+	}
+
+	debug_exit();
+
+	return ret;
+}
+
+/* During AP the proper mode is auto-negotiated and the mac, pcs and serdes
+ * configuration are done by the firmware loaded to the MG's CM3 for appropriate
+ * negotiated mode. Therefore there is no need to configure the mac, pcs and
+ * serdes from u-boot. The only thing that need to be setup is powering up
+ * the comphy, which is done through Common PHY<n> Configuration 1 Register
+ * (CP0: 0xF2441000, CP1: 0xF4441000). This step can't be done by MG's CM3,
+ * since it doesn't have an access to this register-set (but it has access to
+ * the network registers like: MG, AP, MAC, PCS, Serdes etc.)
+ */
+static int mvebu_cp110_comphy_ap_power_on(uint64_t comphy_base,
+					  uint8_t comphy_index)
+{
+	uint32_t mask, data;
+	uintptr_t comphy_addr = comphy_addr =
+				COMPHY_ADDR(comphy_base, comphy_index);
+
+	debug_enter();
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+	debug_exit();
+
+	return 0;
+}
+
+/*
+ * This function allows to reset the digital synchronizers between
+ * the MAC and the PHY, it is required when the MAC changes its state.
+ */
+int mvebu_cp110_comphy_digital_reset(uint64_t comphy_base,
+				     uint8_t comphy_index,
+				     uint32_t comphy_mode, uint32_t command)
+{
+	int mode = COMPHY_GET_MODE(comphy_mode);
+	uintptr_t sd_ip_addr;
+	uint32_t mask, data;
+
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+
+	switch (mode) {
+	case (COMPHY_SGMII_MODE):
+	case (COMPHY_HS_SGMII_MODE):
+	case (COMPHY_XFI_MODE):
+	case (COMPHY_SFI_MODE):
+	case (COMPHY_RXAUI_MODE):
+		mask = SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+		data = ((command == COMPHY_COMMAND_DIGITAL_PWR_OFF) ?
+			0x0 : 0x1) << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+		reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+		break;
+	default:
+		ERROR("comphy%d: Digital PWR ON/OFF is not supported\n",
+			comphy_index);
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+int mvebu_cp110_comphy_power_on(uint64_t comphy_base, uint64_t comphy_index,
+				uint64_t comphy_mode)
+{
+	int mode = COMPHY_GET_MODE(comphy_mode);
+	int err = 0;
+
+	debug_enter();
+
+	switch (mode) {
+	case(COMPHY_SATA_MODE):
+		err = mvebu_cp110_comphy_sata_power_on(comphy_base,
+						       comphy_index,
+						       comphy_mode);
+		break;
+	case(COMPHY_SGMII_MODE):
+	case(COMPHY_HS_SGMII_MODE):
+		err = mvebu_cp110_comphy_sgmii_power_on(comphy_base,
+							comphy_index,
+							comphy_mode);
+		break;
+	/* From comphy perspective, XFI and SFI are the same */
+	case (COMPHY_XFI_MODE):
+	case (COMPHY_SFI_MODE):
+		err = mvebu_cp110_comphy_xfi_power_on(comphy_base,
+						      comphy_index,
+						      comphy_mode);
+		break;
+	case (COMPHY_PCIE_MODE):
+		err = mvebu_cp110_comphy_pcie_power_on(comphy_base,
+						       comphy_index,
+						       comphy_mode);
+		break;
+	case (COMPHY_RXAUI_MODE):
+		err = mvebu_cp110_comphy_rxaui_power_on(comphy_base,
+							comphy_index,
+							comphy_mode);
+	case (COMPHY_USB3H_MODE):
+	case (COMPHY_USB3D_MODE):
+		err = mvebu_cp110_comphy_usb3_power_on(comphy_base,
+						       comphy_index,
+						       comphy_mode);
+		break;
+	case (COMPHY_AP_MODE):
+		err = mvebu_cp110_comphy_ap_power_on(comphy_base, comphy_index);
+		break;
+	default:
+		ERROR("comphy%lld: unsupported comphy mode\n", comphy_index);
+		err = -EINVAL;
+		break;
+	}
+
+	debug_exit();
+
+	return err;
+}
+
+int mvebu_cp110_comphy_power_off(uint64_t comphy_base, uint64_t comphy_index)
+{
+	uintptr_t sd_ip_addr, comphy_ip_addr;
+	uint32_t mask, data;
+
+	debug_enter();
+
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+	comphy_ip_addr = COMPHY_ADDR(comphy_base, comphy_index);
+
+	/* Hard reset the comphy, for Ethernet modes and Sata */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* PCIe reset */
+	spin_lock(&cp110_mac_reset_lock);
+
+	/* The mvebu_cp110_comphy_power_off will be called only from Linux (to
+	 * override settings done by bootloader) and it will be relevant only
+	 * to PCIe (called before check if to skip pcie power off or not).
+	 */
+	data = mmio_read_32(SYS_CTRL_FROM_COMPHY_ADDR(comphy_base) +
+						 SYS_CTRL_UINIT_SOFT_RESET_REG);
+	switch (comphy_index) {
+	case COMPHY_LANE0:
+		data &= ~PCIE_MAC_RESET_MASK_PORT0;
+		break;
+	case COMPHY_LANE4:
+		data &= ~PCIE_MAC_RESET_MASK_PORT1;
+		break;
+	case COMPHY_LANE5:
+		data &= ~PCIE_MAC_RESET_MASK_PORT2;
+		break;
+	}
+
+	mmio_write_32(SYS_CTRL_FROM_COMPHY_ADDR(comphy_base) +
+					   SYS_CTRL_UINIT_SOFT_RESET_REG, data);
+	spin_unlock(&cp110_mac_reset_lock);
+
+	/* Hard reset the comphy, for PCIe and usb3 */
+	mask = COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data = 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	reg_set(comphy_ip_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Clear comphy PHY and PIPE selector, can't rely on previous config. */
+	mvebu_cp110_comphy_clr_phy_selector(comphy_base, comphy_index);
+	mvebu_cp110_comphy_clr_pipe_selector(comphy_base, comphy_index);
+
+	debug_exit();
+
+	return 0;
+}
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.h b/drivers/marvell/comphy/phy-comphy-cp110.h
new file mode 100644
index 00000000..ada6aeca
--- /dev/null
+++ b/drivers/marvell/comphy/phy-comphy-cp110.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Marvell CP110 SoC COMPHY unit driver */
+
+int mvebu_cp110_comphy_is_pll_locked(uint64_t comphy_base,
+				     uint64_t comphy_index);
+int mvebu_cp110_comphy_power_off(uint64_t comphy_base,
+				 uint64_t comphy_index);
+int mvebu_cp110_comphy_power_on(uint64_t comphy_base,
+				uint64_t comphy_index, uint64_t comphy_mode);
+int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
+				       uint8_t comphy_index);
+int mvebu_cp110_comphy_digital_reset(uint64_t comphy_base, uint8_t comphy_index,
+				     uint32_t comphy_mode, uint32_t command);
diff --git a/drivers/marvell/gwin.c b/drivers/marvell/gwin.c
new file mode 100644
index 00000000..2b17f35c
--- /dev/null
+++ b/drivers/marvell/gwin.c
@@ -0,0 +1,227 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* GWIN unit device driver for Marvell AP810 SoC */
+
+#include <a8k_common.h>
+#include <debug.h>
+#include <gwin.h>
+#include <mmio.h>
+#include <mvebu.h>
+#include <mvebu_def.h>
+
+#if LOG_LEVEL >= LOG_LEVEL_INFO
+#define DEBUG_ADDR_MAP
+#endif
+
+/* common defines */
+#define WIN_ENABLE_BIT			(0x1)
+#define WIN_TARGET_MASK			(0xF)
+#define WIN_TARGET_SHIFT		(0x8)
+#define WIN_TARGET(tgt)			(((tgt) & WIN_TARGET_MASK) \
+					<< WIN_TARGET_SHIFT)
+
+/* Bits[43:26] of the physical address are the window base,
+ * which is aligned to 64MB
+ */
+#define ADDRESS_RSHIFT			(26)
+#define ADDRESS_LSHIFT			(10)
+#define GWIN_ALIGNMENT_64M		(0x4000000)
+
+/* AP registers */
+#define GWIN_CR_OFFSET(ap, win)		(MVEBU_GWIN_BASE(ap) + 0x0 + \
+						(0x10 * (win)))
+#define GWIN_ALR_OFFSET(ap, win)	(MVEBU_GWIN_BASE(ap) + 0x8 + \
+						(0x10 * (win)))
+#define GWIN_AHR_OFFSET(ap, win)	(MVEBU_GWIN_BASE(ap) + 0xc + \
+						(0x10 * (win)))
+
+#define CCU_GRU_CR_OFFSET(ap)		(MVEBU_CCU_GRU_BASE(ap))
+#define CCR_GRU_CR_GWIN_MBYPASS		(1 << 1)
+
+static void gwin_check(struct addr_map_win *win)
+{
+	/* The base is always 64M aligned */
+	if (IS_NOT_ALIGN(win->base_addr, GWIN_ALIGNMENT_64M)) {
+		win->base_addr &= ~(GWIN_ALIGNMENT_64M - 1);
+		NOTICE("%s: Align the base address to 0x%llx\n",
+		       __func__, win->base_addr);
+	}
+
+	/* size parameter validity check */
+	if (IS_NOT_ALIGN(win->win_size, GWIN_ALIGNMENT_64M)) {
+		win->win_size = ALIGN_UP(win->win_size, GWIN_ALIGNMENT_64M);
+		NOTICE("%s: Aligning window size to 0x%llx\n",
+		       __func__, win->win_size);
+	}
+}
+
+static void gwin_enable_window(int ap_index, struct addr_map_win *win,
+			       uint32_t win_num)
+{
+	uint32_t alr, ahr;
+	uint64_t end_addr;
+
+	if ((win->target_id & WIN_TARGET_MASK) != win->target_id) {
+		ERROR("target ID = %d, is invalid\n", win->target_id);
+		return;
+	}
+
+	/* calculate 64bit end-address */
+	end_addr = (win->base_addr + win->win_size - 1);
+
+	alr = (uint32_t)((win->base_addr >> ADDRESS_RSHIFT) << ADDRESS_LSHIFT);
+	ahr = (uint32_t)((end_addr >> ADDRESS_RSHIFT) << ADDRESS_LSHIFT);
+
+	/* write start address and end address for GWIN */
+	mmio_write_32(GWIN_ALR_OFFSET(ap_index, win_num), alr);
+	mmio_write_32(GWIN_AHR_OFFSET(ap_index, win_num), ahr);
+
+	/* write the target ID and enable the window */
+	mmio_write_32(GWIN_CR_OFFSET(ap_index, win_num),
+		      WIN_TARGET(win->target_id) | WIN_ENABLE_BIT);
+}
+
+static void gwin_disable_window(int ap_index, uint32_t win_num)
+{
+	uint32_t win_reg;
+
+	win_reg = mmio_read_32(GWIN_CR_OFFSET(ap_index, win_num));
+	win_reg &= ~WIN_ENABLE_BIT;
+	mmio_write_32(GWIN_CR_OFFSET(ap_index, win_num), win_reg);
+}
+
+/* Insert/Remove temporary window for using the out-of reset default
+ * CPx base address to access the CP configuration space prior to
+ * the further base address update in accordance with address mapping
+ * design.
+ *
+ * NOTE: Use the same window array for insertion and removal of
+ *       temporary windows.
+ */
+void gwin_temp_win_insert(int ap_index, struct addr_map_win *win, int size)
+{
+	uint32_t win_id;
+
+	for (int i = 0; i < size; i++) {
+		win_id = MVEBU_GWIN_MAX_WINS - i - 1;
+		gwin_check(win);
+		gwin_enable_window(ap_index, win, win_id);
+		win++;
+	}
+}
+
+/*
+ * NOTE: Use the same window array for insertion and removal of
+ *       temporary windows.
+ */
+void gwin_temp_win_remove(int ap_index, struct addr_map_win *win, int size)
+{
+	uint32_t win_id;
+
+	for (int i = 0; i < size; i++) {
+		uint64_t base;
+		uint32_t target;
+
+		win_id = MVEBU_GWIN_MAX_WINS - i - 1;
+
+		target = mmio_read_32(GWIN_CR_OFFSET(ap_index, win_id));
+		target >>= WIN_TARGET_SHIFT;
+		target &= WIN_TARGET_MASK;
+
+		base = mmio_read_32(GWIN_ALR_OFFSET(ap_index, win_id));
+		base >>= ADDRESS_LSHIFT;
+		base <<= ADDRESS_RSHIFT;
+
+		if (win->target_id != target) {
+			ERROR("%s: Trying to remove bad window-%d!\n",
+			      __func__, win_id);
+			continue;
+		}
+		gwin_disable_window(ap_index, win_id);
+		win++;
+	}
+}
+
+#ifdef DEBUG_ADDR_MAP
+static void dump_gwin(int ap_index)
+{
+	uint32_t win_num;
+
+	/* Dump all GWIN windows */
+	tf_printf("\tbank  target     start              end\n");
+	tf_printf("\t----------------------------------------------------\n");
+	for (win_num = 0; win_num < MVEBU_GWIN_MAX_WINS; win_num++) {
+		uint32_t cr;
+		uint64_t alr, ahr;
+
+		cr  = mmio_read_32(GWIN_CR_OFFSET(ap_index, win_num));
+		/* Window enabled */
+		if (cr & WIN_ENABLE_BIT) {
+			alr = mmio_read_32(GWIN_ALR_OFFSET(ap_index, win_num));
+			alr = (alr >> ADDRESS_LSHIFT) << ADDRESS_RSHIFT;
+			ahr = mmio_read_32(GWIN_AHR_OFFSET(ap_index, win_num));
+			ahr = (ahr >> ADDRESS_LSHIFT) << ADDRESS_RSHIFT;
+			tf_printf("\tgwin   %d     0x%016llx 0x%016llx\n",
+				  (cr >> 8) & 0xF, alr, ahr);
+		}
+	}
+}
+#endif
+
+int init_gwin(int ap_index)
+{
+	struct addr_map_win *win;
+	uint32_t win_id;
+	uint32_t win_count;
+	uint32_t win_reg;
+
+	INFO("Initializing GWIN Address decoding\n");
+
+	/* Get the array of the windows and its size */
+	marvell_get_gwin_memory_map(ap_index, &win, &win_count);
+	if (win_count <= 0) {
+		INFO("no windows configurations found\n");
+		return 0;
+	}
+
+	if (win_count > MVEBU_GWIN_MAX_WINS) {
+		ERROR("number of windows is bigger than %d\n",
+		      MVEBU_GWIN_MAX_WINS);
+		return 0;
+	}
+
+	/* disable all windows */
+	for (win_id = 0; win_id < MVEBU_GWIN_MAX_WINS; win_id++)
+		gwin_disable_window(ap_index, win_id);
+
+	/* enable relevant windows */
+	for (win_id = 0; win_id < win_count; win_id++, win++) {
+		gwin_check(win);
+		gwin_enable_window(ap_index, win, win_id);
+	}
+
+	/* GWIN Miss feature has not verified, therefore any access towards
+	 * remote AP should be accompanied with proper configuration to
+	 * GWIN registers group and therefore the GWIN Miss feature
+	 * should be set into Bypass mode, need to make sure all GWIN regions
+	 * are defined correctly that will assure no GWIN miss occurrance
+	 * JIRA-AURORA2-1630
+	 */
+	INFO("Update GWIN miss bypass\n");
+	win_reg = mmio_read_32(CCU_GRU_CR_OFFSET(ap_index));
+	win_reg |= CCR_GRU_CR_GWIN_MBYPASS;
+	mmio_write_32(CCU_GRU_CR_OFFSET(ap_index), win_reg);
+
+#ifdef DEBUG_ADDR_MAP
+	dump_gwin(ap_index);
+#endif
+
+	INFO("Done GWIN Address decoding Initializing\n");
+
+	return 0;
+}
diff --git a/drivers/marvell/i2c/a8k_i2c.c b/drivers/marvell/i2c/a8k_i2c.c
new file mode 100644
index 00000000..737dd0a7
--- /dev/null
+++ b/drivers/marvell/i2c/a8k_i2c.c
@@ -0,0 +1,613 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* This driver provides I2C support for Marvell A8K and compatible SoCs */
+
+#include <a8k_i2c.h>
+#include <debug.h>
+#include <delay_timer.h>
+#include <errno.h>
+#include <mmio.h>
+#include <mvebu_def.h>
+
+#if LOG_LEVEL >= LOG_LEVEL_VERBOSE
+#define DEBUG_I2C
+#endif
+
+#define CONFIG_SYS_TCLK			250000000
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		0x0
+#define I2C_TIMEOUT_VALUE		0x500
+#define I2C_MAX_RETRY_CNT		1000
+#define I2C_CMD_WRITE			0x0
+#define I2C_CMD_READ			0x1
+
+#define I2C_DATA_ADDR_7BIT_OFFS		0x1
+#define I2C_DATA_ADDR_7BIT_MASK		(0xFF << I2C_DATA_ADDR_7BIT_OFFS)
+
+#define I2C_CONTROL_ACK			0x00000004
+#define I2C_CONTROL_IFLG		0x00000008
+#define I2C_CONTROL_STOP		0x00000010
+#define I2C_CONTROL_START		0x00000020
+#define I2C_CONTROL_TWSIEN		0x00000040
+#define I2C_CONTROL_INTEN		0x00000080
+
+#define I2C_STATUS_START			0x08
+#define I2C_STATUS_REPEATED_START		0x10
+#define I2C_STATUS_ADDR_W_ACK			0x18
+#define I2C_STATUS_DATA_W_ACK			0x28
+#define I2C_STATUS_LOST_ARB_DATA_ADDR_TRANSFER	0x38
+#define I2C_STATUS_ADDR_R_ACK			0x40
+#define I2C_STATUS_DATA_R_ACK			0x50
+#define I2C_STATUS_DATA_R_NAK			0x58
+#define I2C_STATUS_LOST_ARB_GENERAL_CALL	0x78
+#define I2C_STATUS_IDLE				0xF8
+
+#define I2C_UNSTUCK_TRIGGER			0x1
+#define I2C_UNSTUCK_ONGOING			0x2
+#define I2C_UNSTUCK_ERROR			0x4
+struct  marvell_i2c_regs {
+	uint32_t slave_address;
+	uint32_t data;
+	uint32_t control;
+	union {
+		uint32_t status;	/* when reading */
+		uint32_t baudrate;	/* when writing */
+	} u;
+	uint32_t xtnd_slave_addr;
+	uint32_t reserved[2];
+	uint32_t soft_reset;
+	uint8_t  reserved2[0xa0 - 0x20];
+	uint32_t unstuck;
+};
+
+static struct marvell_i2c_regs *base;
+
+static int marvell_i2c_lost_arbitration(uint32_t *status)
+{
+	*status = mmio_read_32((uintptr_t)&base->u.status);
+	if ((*status == I2C_STATUS_LOST_ARB_DATA_ADDR_TRANSFER) ||
+	    (*status == I2C_STATUS_LOST_ARB_GENERAL_CALL))
+		return -EAGAIN;
+
+	return 0;
+}
+
+static void marvell_i2c_interrupt_clear(void)
+{
+	uint32_t reg;
+
+	reg = mmio_read_32((uintptr_t)&base->control);
+	reg &= ~(I2C_CONTROL_IFLG);
+	mmio_write_32((uintptr_t)&base->control, reg);
+	/* Wait for 1 us for the clear to take effect */
+	udelay(1);
+}
+
+static int marvell_i2c_interrupt_get(void)
+{
+	uint32_t reg;
+
+	/* get the interrupt flag bit */
+	reg = mmio_read_32((uintptr_t)&base->control);
+	reg &= I2C_CONTROL_IFLG;
+	return reg && I2C_CONTROL_IFLG;
+}
+
+static int marvell_i2c_wait_interrupt(void)
+{
+	uint32_t timeout = 0;
+
+	while (!marvell_i2c_interrupt_get() && (timeout++ < I2C_TIMEOUT_VALUE))
+		;
+	if (timeout >= I2C_TIMEOUT_VALUE)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int marvell_i2c_start_bit_set(void)
+{
+	int is_int_flag = 0;
+	uint32_t status;
+
+	if (marvell_i2c_interrupt_get())
+		is_int_flag = 1;
+
+	/* set start bit */
+	mmio_write_32((uintptr_t)&base->control,
+		      mmio_read_32((uintptr_t)&base->control) |
+		      I2C_CONTROL_START);
+
+	/* in case that the int flag was set before i.e. repeated start bit */
+	if (is_int_flag) {
+		VERBOSE("%s: repeated start Bit\n", __func__);
+		marvell_i2c_interrupt_clear();
+	}
+
+	if (marvell_i2c_wait_interrupt()) {
+		ERROR("Start clear bit timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	/* check that start bit went down */
+	if ((mmio_read_32((uintptr_t)&base->control) &
+	    I2C_CONTROL_START) != 0) {
+		ERROR("Start bit didn't went down\n");
+		return -EPERM;
+	}
+
+	/* check the status */
+	if (marvell_i2c_lost_arbitration(&status)) {
+		ERROR("%s - %d: Lost arbitration, got status %x\n",
+		      __func__, __LINE__, status);
+		return -EAGAIN;
+	}
+	if ((status != I2C_STATUS_START) &&
+	    (status != I2C_STATUS_REPEATED_START)) {
+		ERROR("Got status %x after enable start bit.\n", status);
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+static int marvell_i2c_stop_bit_set(void)
+{
+	int timeout;
+	uint32_t status;
+
+	/* Generate stop bit */
+	mmio_write_32((uintptr_t)&base->control,
+		      mmio_read_32((uintptr_t)&base->control) |
+		      I2C_CONTROL_STOP);
+	marvell_i2c_interrupt_clear();
+
+	timeout = 0;
+	/* Read control register, check the control stop bit */
+	while ((mmio_read_32((uintptr_t)&base->control) & I2C_CONTROL_STOP) &&
+	       (timeout++ < I2C_TIMEOUT_VALUE))
+		;
+	if (timeout >= I2C_TIMEOUT_VALUE) {
+		ERROR("Stop bit didn't went down\n");
+		return -ETIMEDOUT;
+	}
+
+	/* check that stop bit went down */
+	if ((mmio_read_32((uintptr_t)&base->control) & I2C_CONTROL_STOP) != 0) {
+		ERROR("Stop bit didn't went down\n");
+		return -EPERM;
+	}
+
+	/* check the status */
+	if (marvell_i2c_lost_arbitration(&status)) {
+		ERROR("%s - %d: Lost arbitration, got status %x\n",
+		      __func__, __LINE__, status);
+		return -EAGAIN;
+	}
+	if (status != I2C_STATUS_IDLE) {
+		ERROR("Got status %x after enable stop bit.\n", status);
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+static int marvell_i2c_address_set(uint8_t chain, int command)
+{
+	uint32_t reg, status;
+
+	reg = (chain << I2C_DATA_ADDR_7BIT_OFFS) & I2C_DATA_ADDR_7BIT_MASK;
+	reg |= command;
+	mmio_write_32((uintptr_t)&base->data, reg);
+	udelay(1);
+
+	marvell_i2c_interrupt_clear();
+
+	if (marvell_i2c_wait_interrupt()) {
+		ERROR("Start clear bit timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	/* check the status */
+	if (marvell_i2c_lost_arbitration(&status)) {
+		ERROR("%s - %d: Lost arbitration, got status %x\n",
+		      __func__, __LINE__, status);
+		return -EAGAIN;
+	}
+	if (((status != I2C_STATUS_ADDR_R_ACK) && (command == I2C_CMD_READ)) ||
+	   ((status != I2C_STATUS_ADDR_W_ACK) && (command == I2C_CMD_WRITE))) {
+		/* only in debug, since in boot we try to read the SPD
+		 * of both DRAM, and we don't want error messages in cas
+		 * DIMM doesn't exist.
+		 */
+		INFO("%s: ERROR - status %x addr in %s mode.\n", __func__,
+		     status, (command == I2C_CMD_WRITE) ? "Write" : "Read");
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+/*
+ * The I2C module contains a clock divider to generate the SCL clock.
+ * This function calculates and sets the <N> and <M> fields in the I2C Baud
+ * Rate Register (t=01) to obtain given 'requested_speed'.
+ * The requested_speed will be equal to:
+ * CONFIG_SYS_TCLK / (10 * (M + 1) * (2 << N))
+ * Where M is the value represented by bits[6:3] and N is the value represented
+ * by bits[2:0] of "I2C Baud Rate Register".
+ * Therefore max M which can be set is 16 (2^4) and max N is 8 (2^3). So the
+ * lowest possible baudrate is:
+ * CONFIG_SYS_TCLK/(10 * (16 +1) * (2 << 8), which equals to:
+ * CONFIG_SYS_TCLK/87040. Assuming that CONFIG_SYS_TCLK=250MHz, the lowest
+ * possible frequency is ~2,872KHz.
+ */
+static unsigned int marvell_i2c_bus_speed_set(unsigned int requested_speed)
+{
+	unsigned int n, m, freq, margin, min_margin = 0xffffffff;
+	unsigned int actual_n = 0, actual_m = 0;
+	int val;
+
+	/* Calculate N and M for the TWSI clock baud rate */
+	for (n = 0; n < 8; n++) {
+		for (m = 0; m < 16; m++) {
+			freq = CONFIG_SYS_TCLK / (10 * (m + 1) * (2 << n));
+			val = requested_speed - freq;
+			margin = (val > 0) ? val : -val;
+
+			if ((freq <= requested_speed) &&
+			    (margin < min_margin)) {
+				min_margin = margin;
+				actual_n = n;
+				actual_m = m;
+			}
+		}
+	}
+	VERBOSE("%s: actual_n = %u, actual_m = %u\n",
+		__func__, actual_n, actual_m);
+	/* Set the baud rate */
+	mmio_write_32((uintptr_t)&base->u.baudrate, (actual_m << 3) | actual_n);
+
+	return 0;
+}
+
+#ifdef DEBUG_I2C
+static int marvell_i2c_probe(uint8_t chip)
+{
+	int ret = 0;
+
+	ret = marvell_i2c_start_bit_set();
+	if (ret != 0) {
+		marvell_i2c_stop_bit_set();
+		ERROR("%s - %d: %s", __func__, __LINE__,
+		      "marvell_i2c_start_bit_set failed\n");
+		return -EPERM;
+	}
+
+	ret = marvell_i2c_address_set(chip, I2C_CMD_WRITE);
+	if (ret != 0) {
+		marvell_i2c_stop_bit_set();
+		ERROR("%s - %d: %s", __func__, __LINE__,
+		      "marvell_i2c_address_set failed\n");
+		return -EPERM;
+	}
+
+	marvell_i2c_stop_bit_set();
+
+	VERBOSE("%s: successful I2C probe\n", __func__);
+
+	return ret;
+}
+#endif
+
+/* regular i2c transaction */
+static int marvell_i2c_data_receive(uint8_t *p_block, uint32_t block_size)
+{
+	uint32_t reg, status, block_size_read = block_size;
+
+	/* Wait for cause interrupt */
+	if (marvell_i2c_wait_interrupt()) {
+		ERROR("Start clear bit timeout\n");
+		return -ETIMEDOUT;
+	}
+	while (block_size_read) {
+		if (block_size_read == 1) {
+			reg = mmio_read_32((uintptr_t)&base->control);
+			reg &= ~(I2C_CONTROL_ACK);
+			mmio_write_32((uintptr_t)&base->control, reg);
+		}
+		marvell_i2c_interrupt_clear();
+
+		if (marvell_i2c_wait_interrupt()) {
+			ERROR("Start clear bit timeout\n");
+			return -ETIMEDOUT;
+		}
+		/* check the status */
+		if (marvell_i2c_lost_arbitration(&status)) {
+			ERROR("%s - %d: Lost arbitration, got status %x\n",
+			      __func__, __LINE__, status);
+			return -EAGAIN;
+		}
+		if ((status != I2C_STATUS_DATA_R_ACK) &&
+		    (block_size_read != 1)) {
+			ERROR("Status %x in read transaction\n", status);
+			return -EPERM;
+		}
+		if ((status != I2C_STATUS_DATA_R_NAK) &&
+		    (block_size_read == 1)) {
+			ERROR("Status %x in Rd Terminate\n", status);
+			return -EPERM;
+		}
+
+		/* read the data */
+		*p_block = (uint8_t) mmio_read_32((uintptr_t)&base->data);
+		VERBOSE("%s: place %d read %x\n", __func__,
+			block_size - block_size_read, *p_block);
+		p_block++;
+		block_size_read--;
+	}
+
+	return 0;
+}
+
+static int marvell_i2c_data_transmit(uint8_t *p_block, uint32_t block_size)
+{
+	uint32_t status, block_size_write = block_size;
+
+	if (marvell_i2c_wait_interrupt()) {
+		ERROR("Start clear bit timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	while (block_size_write) {
+		/* write the data */
+		mmio_write_32((uintptr_t)&base->data, (uint32_t) *p_block);
+		VERBOSE("%s: index = %d, data = %x\n", __func__,
+			block_size - block_size_write, *p_block);
+		p_block++;
+		block_size_write--;
+
+		marvell_i2c_interrupt_clear();
+
+		if (marvell_i2c_wait_interrupt()) {
+			ERROR("Start clear bit timeout\n");
+			return -ETIMEDOUT;
+		}
+
+		/* check the status */
+		if (marvell_i2c_lost_arbitration(&status)) {
+			ERROR("%s - %d: Lost arbitration, got status %x\n",
+			      __func__, __LINE__, status);
+			return -EAGAIN;
+		}
+		if (status != I2C_STATUS_DATA_W_ACK) {
+			ERROR("Status %x in write transaction\n", status);
+			return -EPERM;
+		}
+	}
+
+	return 0;
+}
+
+static int marvell_i2c_target_offset_set(uint8_t chip, uint32_t addr, int alen)
+{
+	uint8_t off_block[2];
+	uint32_t off_size;
+
+	if (alen == 2) { /* 2-byte addresses support */
+		off_block[0] = (addr >> 8) & 0xff;
+		off_block[1] = addr & 0xff;
+		off_size = 2;
+	} else { /* 1-byte addresses support */
+		off_block[0] = addr & 0xff;
+		off_size = 1;
+	}
+	VERBOSE("%s: off_size = %x addr1 = %x addr2 = %x\n", __func__,
+		off_size, off_block[0], off_block[1]);
+	return marvell_i2c_data_transmit(off_block, off_size);
+}
+
+static int marvell_i2c_unstuck(int ret)
+{
+	uint32_t v;
+
+	if (ret != -ETIMEDOUT)
+		return ret;
+	VERBOSE("Trying to \"unstuck i2c\"... ");
+	i2c_init(base);
+	mmio_write_32((uintptr_t)&base->unstuck, I2C_UNSTUCK_TRIGGER);
+	do {
+		v = mmio_read_32((uintptr_t)&base->unstuck);
+	} while (v & I2C_UNSTUCK_ONGOING);
+
+	if (v & I2C_UNSTUCK_ERROR) {
+		VERBOSE("failed - soft reset i2c\n");
+		ret = -EPERM;
+	} else {
+		VERBOSE("ok\n");
+		i2c_init(base);
+		ret = -EAGAIN;
+	}
+	return ret;
+}
+
+/*
+ * API Functions
+ */
+void i2c_init(void *i2c_base)
+{
+	/* For I2C speed and slave address, now we do not set them since
+	 * we just provide the working speed and slave address in plat_def.h
+	 * for i2c_init
+	 */
+	base = (struct marvell_i2c_regs *)i2c_base;
+
+	/* Reset the I2C logic */
+	mmio_write_32((uintptr_t)&base->soft_reset, 0);
+
+	udelay(200);
+
+	marvell_i2c_bus_speed_set(CONFIG_SYS_I2C_SPEED);
+
+	/* Enable the I2C and slave */
+	mmio_write_32((uintptr_t)&base->control,
+		      I2C_CONTROL_TWSIEN | I2C_CONTROL_ACK);
+
+	/* set the I2C slave address */
+	mmio_write_32((uintptr_t)&base->xtnd_slave_addr, 0);
+	mmio_write_32((uintptr_t)&base->slave_address, CONFIG_SYS_I2C_SLAVE);
+
+	/* unmask I2C interrupt */
+	mmio_write_32((uintptr_t)&base->control,
+		      mmio_read_32((uintptr_t)&base->control) |
+		      I2C_CONTROL_INTEN);
+
+	udelay(10);
+}
+
+/*
+ * i2c_read: - Read multiple bytes from an i2c device
+ *
+ * The higher level routines take into account that this function is only
+ * called with len < page length of the device (see configuration file)
+ *
+ * @chip:	address of the chip which is to be read
+ * @addr:	i2c data address within the chip
+ * @alen:	length of the i2c data address (1..2 bytes)
+ * @buffer:	where to write the data
+ * @len:	how much byte do we want to read
+ * @return:	0 in case of success
+ */
+int i2c_read(uint8_t chip, uint32_t addr, int alen, uint8_t *buffer, int len)
+{
+	int ret = 0;
+	uint32_t counter = 0;
+
+#ifdef DEBUG_I2C
+	marvell_i2c_probe(chip);
+#endif
+
+	do {
+		if (ret != -EAGAIN && ret) {
+			ERROR("i2c transaction failed, after %d retries\n",
+			      counter);
+			marvell_i2c_stop_bit_set();
+			return ret;
+		}
+
+		/* wait for 1 us for the interrupt clear to take effect */
+		if (counter > 0)
+			udelay(1);
+		counter++;
+
+		ret = marvell_i2c_start_bit_set();
+		if (ret) {
+			ret = marvell_i2c_unstuck(ret);
+			continue;
+		}
+
+		/* if EEPROM device */
+		if (alen != 0) {
+			ret = marvell_i2c_address_set(chip, I2C_CMD_WRITE);
+			if (ret)
+				continue;
+
+			ret = marvell_i2c_target_offset_set(chip, addr, alen);
+			if (ret)
+				continue;
+			ret = marvell_i2c_start_bit_set();
+			if (ret)
+				continue;
+		}
+
+		ret =  marvell_i2c_address_set(chip, I2C_CMD_READ);
+		if (ret)
+			continue;
+
+		ret = marvell_i2c_data_receive(buffer, len);
+		if (ret)
+			continue;
+
+		ret =  marvell_i2c_stop_bit_set();
+	} while ((ret == -EAGAIN) && (counter < I2C_MAX_RETRY_CNT));
+
+	if (counter == I2C_MAX_RETRY_CNT) {
+		ERROR("I2C transactions failed, got EAGAIN %d times\n",
+		      I2C_MAX_RETRY_CNT);
+		ret = -EPERM;
+	}
+	mmio_write_32((uintptr_t)&base->control,
+		      mmio_read_32((uintptr_t)&base->control) |
+		      I2C_CONTROL_ACK);
+
+	udelay(1);
+	return ret;
+}
+
+/*
+ * i2c_write: -  Write multiple bytes to an i2c device
+ *
+ * The higher level routines take into account that this function is only
+ * called with len < page length of the device (see configuration file)
+ *
+ * @chip:	address of the chip which is to be written
+ * @addr:	i2c data address within the chip
+ * @alen:	length of the i2c data address (1..2 bytes)
+ * @buffer:	where to find the data to be written
+ * @len:	how much byte do we want to read
+ * @return:	0 in case of success
+ */
+int i2c_write(uint8_t chip, uint32_t addr, int alen, uint8_t *buffer, int len)
+{
+	int ret = 0;
+	uint32_t counter = 0;
+
+	do {
+		if (ret != -EAGAIN && ret) {
+			ERROR("i2c transaction failed\n");
+			marvell_i2c_stop_bit_set();
+			return ret;
+		}
+		/* wait for 1 us for the interrupt clear to take effect */
+		if (counter > 0)
+			udelay(1);
+		counter++;
+
+		ret = marvell_i2c_start_bit_set();
+		if (ret) {
+			ret = marvell_i2c_unstuck(ret);
+			continue;
+		}
+
+		ret = marvell_i2c_address_set(chip, I2C_CMD_WRITE);
+		if (ret)
+			continue;
+
+		/* if EEPROM device */
+		if (alen != 0) {
+			ret = marvell_i2c_target_offset_set(chip, addr, alen);
+			if (ret)
+				continue;
+		}
+
+		ret = marvell_i2c_data_transmit(buffer, len);
+		if (ret)
+			continue;
+
+		ret = marvell_i2c_stop_bit_set();
+	} while ((ret == -EAGAIN) && (counter < I2C_MAX_RETRY_CNT));
+
+	if (counter == I2C_MAX_RETRY_CNT) {
+		ERROR("I2C transactions failed, got EAGAIN %d times\n",
+		      I2C_MAX_RETRY_CNT);
+		ret = -EPERM;
+	}
+
+	udelay(1);
+	return ret;
+}
diff --git a/drivers/marvell/io_win.c b/drivers/marvell/io_win.c
new file mode 100644
index 00000000..701dbb81
--- /dev/null
+++ b/drivers/marvell/io_win.c
@@ -0,0 +1,267 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* IO Window unit device driver for Marvell AP807, AP807 and AP810 SoCs */
+
+#include <a8k_common.h>
+#include <debug.h>
+#include <io_win.h>
+#include <mmio.h>
+#include <mvebu.h>
+#include <mvebu_def.h>
+
+#if LOG_LEVEL >= LOG_LEVEL_INFO
+#define DEBUG_ADDR_MAP
+#endif
+
+/* common defines */
+#define WIN_ENABLE_BIT			(0x1)
+/* Physical address of the base of the window = {Addr[19:0],20`h0} */
+#define ADDRESS_SHIFT			(20 - 4)
+#define ADDRESS_MASK			(0xFFFFFFF0)
+#define IO_WIN_ALIGNMENT_1M		(0x100000)
+#define IO_WIN_ALIGNMENT_64K		(0x10000)
+
+/* AP registers */
+#define IO_WIN_ALR_OFFSET(ap, win)	(MVEBU_IO_WIN_BASE(ap) + 0x0 + \
+						(0x10 * win))
+#define IO_WIN_AHR_OFFSET(ap, win)	(MVEBU_IO_WIN_BASE(ap) + 0x8 + \
+						(0x10 * win))
+#define IO_WIN_CR_OFFSET(ap, win)	(MVEBU_IO_WIN_BASE(ap) + 0xC + \
+						(0x10 * win))
+
+/* For storage of CR, ALR, AHR abd GCR */
+static uint32_t io_win_regs_save[MVEBU_IO_WIN_MAX_WINS * 3 + 1];
+
+static void io_win_check(struct addr_map_win *win)
+{
+	/* for IO The base is always 1M aligned */
+	/* check if address is aligned to 1M */
+	if (IS_NOT_ALIGN(win->base_addr, IO_WIN_ALIGNMENT_1M)) {
+		win->base_addr = ALIGN_UP(win->base_addr, IO_WIN_ALIGNMENT_1M);
+		NOTICE("%s: Align up the base address to 0x%llx\n",
+		       __func__, win->base_addr);
+	}
+
+	/* size parameter validity check */
+	if (IS_NOT_ALIGN(win->win_size, IO_WIN_ALIGNMENT_1M)) {
+		win->win_size = ALIGN_UP(win->win_size, IO_WIN_ALIGNMENT_1M);
+		NOTICE("%s: Aligning size to 0x%llx\n",
+		       __func__, win->win_size);
+	}
+}
+
+static void io_win_enable_window(int ap_index, struct addr_map_win *win,
+				 uint32_t win_num)
+{
+	uint32_t alr, ahr;
+	uint64_t end_addr;
+
+	if (win->target_id < 0 || win->target_id >= MVEBU_IO_WIN_MAX_WINS) {
+		ERROR("target ID = %d, is invalid\n", win->target_id);
+		return;
+	}
+
+	if ((win_num == 0) || (win_num > MVEBU_IO_WIN_MAX_WINS)) {
+		ERROR("Enabling wrong IOW window %d!\n", win_num);
+		return;
+	}
+
+	/* calculate the end-address */
+	end_addr = (win->base_addr + win->win_size - 1);
+
+	alr = (uint32_t)((win->base_addr >> ADDRESS_SHIFT) & ADDRESS_MASK);
+	alr |= WIN_ENABLE_BIT;
+	ahr = (uint32_t)((end_addr >> ADDRESS_SHIFT) & ADDRESS_MASK);
+
+	/* write start address and end address for IO window */
+	mmio_write_32(IO_WIN_ALR_OFFSET(ap_index, win_num), alr);
+	mmio_write_32(IO_WIN_AHR_OFFSET(ap_index, win_num), ahr);
+
+	/* write window target */
+	mmio_write_32(IO_WIN_CR_OFFSET(ap_index, win_num), win->target_id);
+}
+
+static void io_win_disable_window(int ap_index, uint32_t win_num)
+{
+	uint32_t win_reg;
+
+	if ((win_num == 0) || (win_num > MVEBU_IO_WIN_MAX_WINS)) {
+		ERROR("Disabling wrong IOW window %d!\n", win_num);
+		return;
+	}
+
+	win_reg = mmio_read_32(IO_WIN_ALR_OFFSET(ap_index, win_num));
+	win_reg &= ~WIN_ENABLE_BIT;
+	mmio_write_32(IO_WIN_ALR_OFFSET(ap_index, win_num), win_reg);
+}
+
+/* Insert/Remove temporary window for using the out-of reset default
+ * CPx base address to access the CP configuration space prior to
+ * the further base address update in accordance with address mapping
+ * design.
+ *
+ * NOTE: Use the same window array for insertion and removal of
+ *       temporary windows.
+ */
+void iow_temp_win_insert(int ap_index, struct addr_map_win *win, int size)
+{
+	uint32_t win_id;
+
+	for (int i = 0; i < size; i++) {
+		win_id = MVEBU_IO_WIN_MAX_WINS - i - 1;
+		io_win_check(win);
+		io_win_enable_window(ap_index, win, win_id);
+		win++;
+	}
+}
+
+/*
+ * NOTE: Use the same window array for insertion and removal of
+ *       temporary windows.
+ */
+void iow_temp_win_remove(int ap_index, struct addr_map_win *win, int size)
+{
+	uint32_t win_id;
+
+	/* Start from the last window and do not touch Win0 */
+	for (int i = 0; i < size; i++) {
+		uint64_t base;
+		uint32_t target;
+
+		win_id = MVEBU_IO_WIN_MAX_WINS - i - 1;
+
+		target = mmio_read_32(IO_WIN_CR_OFFSET(ap_index, win_id));
+		base = mmio_read_32(IO_WIN_ALR_OFFSET(ap_index, win_id));
+		base &= ~WIN_ENABLE_BIT;
+		base <<= ADDRESS_SHIFT;
+
+		if ((win->target_id != target) || (win->base_addr != base)) {
+			ERROR("%s: Trying to remove bad window-%d!\n",
+			      __func__, win_id);
+			continue;
+		}
+		io_win_disable_window(ap_index, win_id);
+		win++;
+	}
+}
+
+#ifdef DEBUG_ADDR_MAP
+static void dump_io_win(int ap_index)
+{
+	uint32_t trgt_id, win_id;
+	uint32_t alr, ahr;
+	uint64_t start, end;
+
+	/* Dump all IO windows */
+	tf_printf("\tbank  target     start              end\n");
+	tf_printf("\t----------------------------------------------------\n");
+	for (win_id = 0; win_id < MVEBU_IO_WIN_MAX_WINS; win_id++) {
+		alr = mmio_read_32(IO_WIN_ALR_OFFSET(ap_index, win_id));
+		if (alr & WIN_ENABLE_BIT) {
+			alr &= ~WIN_ENABLE_BIT;
+			ahr = mmio_read_32(IO_WIN_AHR_OFFSET(ap_index, win_id));
+			trgt_id = mmio_read_32(IO_WIN_CR_OFFSET(ap_index,
+								win_id));
+			start = ((uint64_t)alr << ADDRESS_SHIFT);
+			end = (((uint64_t)ahr + 0x10) << ADDRESS_SHIFT);
+			tf_printf("\tio-win %d     0x%016llx 0x%016llx\n",
+				  trgt_id, start, end);
+		}
+	}
+	tf_printf("\tio-win gcr is %x\n",
+		  mmio_read_32(MVEBU_IO_WIN_BASE(ap_index) +
+		MVEBU_IO_WIN_GCR_OFFSET));
+}
+#endif
+
+static void iow_save_win_range(int ap_id, int win_first, int win_last,
+			       uint32_t *buffer)
+{
+	int win_id, idx;
+
+	/* Save IOW */
+	for (idx = 0, win_id = win_first; win_id <= win_last; win_id++) {
+		buffer[idx++] = mmio_read_32(IO_WIN_CR_OFFSET(ap_id, win_id));
+		buffer[idx++] = mmio_read_32(IO_WIN_ALR_OFFSET(ap_id, win_id));
+		buffer[idx++] = mmio_read_32(IO_WIN_AHR_OFFSET(ap_id, win_id));
+	}
+	buffer[idx] = mmio_read_32(MVEBU_IO_WIN_BASE(ap_id) +
+				   MVEBU_IO_WIN_GCR_OFFSET);
+}
+
+static void iow_restore_win_range(int ap_id, int win_first, int win_last,
+				  uint32_t *buffer)
+{
+	int win_id, idx;
+
+	/* Restore IOW */
+	for (idx = 0, win_id = win_first; win_id <= win_last; win_id++) {
+		mmio_write_32(IO_WIN_CR_OFFSET(ap_id, win_id), buffer[idx++]);
+		mmio_write_32(IO_WIN_ALR_OFFSET(ap_id, win_id), buffer[idx++]);
+		mmio_write_32(IO_WIN_AHR_OFFSET(ap_id, win_id), buffer[idx++]);
+	}
+	mmio_write_32(MVEBU_IO_WIN_BASE(ap_id) + MVEBU_IO_WIN_GCR_OFFSET,
+		      buffer[idx++]);
+}
+
+void iow_save_win_all(int ap_id)
+{
+	iow_save_win_range(ap_id, 0, MVEBU_IO_WIN_MAX_WINS - 1,
+			   io_win_regs_save);
+}
+
+void iow_restore_win_all(int ap_id)
+{
+	iow_restore_win_range(ap_id, 0, MVEBU_IO_WIN_MAX_WINS - 1,
+			      io_win_regs_save);
+}
+
+int init_io_win(int ap_index)
+{
+	struct addr_map_win *win;
+	uint32_t win_id, win_reg;
+	uint32_t win_count;
+
+	INFO("Initializing IO WIN Address decoding\n");
+
+	/* Get the array of the windows and its size */
+	marvell_get_io_win_memory_map(ap_index, &win, &win_count);
+	if (win_count <= 0)
+		INFO("no windows configurations found\n");
+
+	if (win_count > MVEBU_IO_WIN_MAX_WINS) {
+		INFO("number of windows is bigger than %d\n",
+		     MVEBU_IO_WIN_MAX_WINS);
+		return 0;
+	}
+
+	/* Get the default target id to set the GCR */
+	win_reg = marvell_get_io_win_gcr_target(ap_index);
+	mmio_write_32(MVEBU_IO_WIN_BASE(ap_index) + MVEBU_IO_WIN_GCR_OFFSET,
+		      win_reg);
+
+	/* disable all IO windows */
+	for (win_id = 1; win_id < MVEBU_IO_WIN_MAX_WINS; win_id++)
+		io_win_disable_window(ap_index, win_id);
+
+	/* enable relevant windows, starting from win_id = 1 because
+	 * index 0 dedicated for BootROM
+	 */
+	for (win_id = 1; win_id <= win_count; win_id++, win++) {
+		io_win_check(win);
+		io_win_enable_window(ap_index, win, win_id);
+	}
+
+#ifdef DEBUG_ADDR_MAP
+	dump_io_win(ap_index);
+#endif
+
+	INFO("Done IO WIN Address decoding Initializing\n");
+
+	return 0;
+}
diff --git a/drivers/marvell/iob.c b/drivers/marvell/iob.c
new file mode 100644
index 00000000..9f9d0479
--- /dev/null
+++ b/drivers/marvell/iob.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2016 - 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* IOW unit device driver for Marvell CP110 and CP115 SoCs */
+
+#include <a8k_common.h>
+#include <arch_helpers.h>
+#include <debug.h>
+#include <iob.h>
+#include <mmio.h>
+#include <mvebu.h>
+#include <mvebu_def.h>
+
+#if LOG_LEVEL >= LOG_LEVEL_INFO
+#define DEBUG_ADDR_MAP
+#endif
+
+#define MVEBU_IOB_OFFSET		(0x190000)
+#define MVEBU_IOB_MAX_WINS		16
+
+/* common defines */
+#define WIN_ENABLE_BIT			(0x1)
+/* Physical address of the base of the window = {AddrLow[19:0],20`h0} */
+#define ADDRESS_SHIFT			(20 - 4)
+#define ADDRESS_MASK			(0xFFFFFFF0)
+#define IOB_WIN_ALIGNMENT		(0x100000)
+
+/* IOB registers */
+#define IOB_WIN_CR_OFFSET(win)		(iob_base + 0x0 + (0x20 * win))
+#define IOB_TARGET_ID_OFFSET		(8)
+#define IOB_TARGET_ID_MASK		(0xF)
+
+#define IOB_WIN_SCR_OFFSET(win)		(iob_base + 0x4 + (0x20 * win))
+#define IOB_WIN_ENA_CTRL_WRITE_SECURE	(0x1)
+#define IOB_WIN_ENA_CTRL_READ_SECURE	(0x2)
+#define IOB_WIN_ENA_WRITE_SECURE	(0x4)
+#define IOB_WIN_ENA_READ_SECURE		(0x8)
+
+#define IOB_WIN_ALR_OFFSET(win)		(iob_base + 0x8 + (0x20 * win))
+#define IOB_WIN_AHR_OFFSET(win)		(iob_base + 0xC + (0x20 * win))
+
+uintptr_t iob_base;
+
+static void iob_win_check(struct addr_map_win *win, uint32_t win_num)
+{
+	/* check if address is aligned to the size */
+	if (IS_NOT_ALIGN(win->base_addr, IOB_WIN_ALIGNMENT)) {
+		win->base_addr = ALIGN_UP(win->base_addr, IOB_WIN_ALIGNMENT);
+		ERROR("Window %d: base address unaligned to 0x%x\n",
+		      win_num, IOB_WIN_ALIGNMENT);
+		tf_printf("Align up the base address to 0x%llx\n",
+			  win->base_addr);
+	}
+
+	/* size parameter validity check */
+	if (IS_NOT_ALIGN(win->win_size, IOB_WIN_ALIGNMENT)) {
+		win->win_size = ALIGN_UP(win->win_size, IOB_WIN_ALIGNMENT);
+		ERROR("Window %d: window size unaligned to 0x%x\n", win_num,
+		      IOB_WIN_ALIGNMENT);
+		tf_printf("Aligning size to 0x%llx\n", win->win_size);
+	}
+}
+
+static void iob_enable_win(struct addr_map_win *win, uint32_t win_id)
+{
+	uint32_t iob_win_reg;
+	uint32_t alr, ahr;
+	uint64_t end_addr;
+
+	end_addr = (win->base_addr + win->win_size - 1);
+	alr = (uint32_t)((win->base_addr >> ADDRESS_SHIFT) & ADDRESS_MASK);
+	ahr = (uint32_t)((end_addr >> ADDRESS_SHIFT) & ADDRESS_MASK);
+
+	mmio_write_32(IOB_WIN_ALR_OFFSET(win_id), alr);
+	mmio_write_32(IOB_WIN_AHR_OFFSET(win_id), ahr);
+
+	iob_win_reg = WIN_ENABLE_BIT;
+	iob_win_reg |= (win->target_id & IOB_TARGET_ID_MASK)
+		       << IOB_TARGET_ID_OFFSET;
+	mmio_write_32(IOB_WIN_CR_OFFSET(win_id), iob_win_reg);
+
+}
+
+#ifdef DEBUG_ADDR_MAP
+static void dump_iob(void)
+{
+	uint32_t win_id, win_cr, alr, ahr;
+	uint8_t target_id;
+	uint64_t start, end;
+	char *iob_target_name[IOB_MAX_TID] = {
+		"CFG  ", "MCI0 ", "PEX1 ", "PEX2 ",
+		"PEX0 ", "NAND ", "RUNIT", "MCI1 " };
+
+	/* Dump all IOB windows */
+	tf_printf("bank  id target  start              end\n");
+	tf_printf("----------------------------------------------------\n");
+	for (win_id = 0; win_id < MVEBU_IOB_MAX_WINS; win_id++) {
+		win_cr = mmio_read_32(IOB_WIN_CR_OFFSET(win_id));
+		if (win_cr & WIN_ENABLE_BIT) {
+			target_id = (win_cr >> IOB_TARGET_ID_OFFSET) &
+				     IOB_TARGET_ID_MASK;
+			alr = mmio_read_32(IOB_WIN_ALR_OFFSET(win_id));
+			start = ((uint64_t)alr << ADDRESS_SHIFT);
+			if (win_id != 0) {
+				ahr = mmio_read_32(IOB_WIN_AHR_OFFSET(win_id));
+				end = (((uint64_t)ahr + 0x10) << ADDRESS_SHIFT);
+			} else {
+				/* Window #0 size is hardcoded to 16MB, as it's
+				 * reserved for CP configuration space.
+				 */
+				end = start + (16 << 20);
+			}
+			tf_printf("iob   %02d %s   0x%016llx 0x%016llx\n",
+				  win_id, iob_target_name[target_id],
+				  start, end);
+		}
+	}
+}
+#endif
+
+void iob_cfg_space_update(int ap_idx, int cp_idx, uintptr_t base,
+			  uintptr_t new_base)
+{
+	debug_enter();
+
+	iob_base = base + MVEBU_IOB_OFFSET;
+
+	NOTICE("Change the base address of AP%d-CP%d to %lx\n",
+	       ap_idx, cp_idx, new_base);
+	mmio_write_32(IOB_WIN_ALR_OFFSET(0), new_base >> ADDRESS_SHIFT);
+
+	iob_base = new_base + MVEBU_IOB_OFFSET;
+
+	/* Make sure the address was configured by the CPU before
+	 * any possible access to the CP.
+	 */
+	dsb();
+
+	debug_exit();
+}
+
+int init_iob(uintptr_t base)
+{
+	struct addr_map_win *win;
+	uint32_t win_id, win_reg;
+	uint32_t win_count;
+
+	INFO("Initializing IOB Address decoding\n");
+
+	/* Get the base address of the address decoding MBUS */
+	iob_base = base + MVEBU_IOB_OFFSET;
+
+	/* Get the array of the windows and fill the map data */
+	marvell_get_iob_memory_map(&win, &win_count, base);
+	if (win_count <= 0) {
+		INFO("no windows configurations found\n");
+		return 0;
+	} else if (win_count > (MVEBU_IOB_MAX_WINS - 1)) {
+		ERROR("IOB mem map array > than max available windows (%d)\n",
+		      MVEBU_IOB_MAX_WINS);
+		win_count = MVEBU_IOB_MAX_WINS;
+	}
+
+	/* disable all IOB windows, start from win_id = 1
+	 * because can't disable internal register window
+	 */
+	for (win_id = 1; win_id < MVEBU_IOB_MAX_WINS; win_id++) {
+		win_reg = mmio_read_32(IOB_WIN_CR_OFFSET(win_id));
+		win_reg &= ~WIN_ENABLE_BIT;
+		mmio_write_32(IOB_WIN_CR_OFFSET(win_id), win_reg);
+
+		win_reg = ~IOB_WIN_ENA_CTRL_WRITE_SECURE;
+		win_reg &= ~IOB_WIN_ENA_CTRL_READ_SECURE;
+		win_reg &= ~IOB_WIN_ENA_WRITE_SECURE;
+		win_reg &= ~IOB_WIN_ENA_READ_SECURE;
+		mmio_write_32(IOB_WIN_SCR_OFFSET(win_id), win_reg);
+	}
+
+	for (win_id = 1; win_id < win_count + 1; win_id++, win++) {
+		iob_win_check(win, win_id);
+		iob_enable_win(win, win_id);
+	}
+
+#ifdef DEBUG_ADDR_MAP
+	dump_iob();
+#endif
+
+	INFO("Done IOB Address decoding Initializing\n");
+
+	return 0;
+}
diff --git a/drivers/marvell/mci.c b/drivers/marvell/mci.c
new file mode 100644
index 00000000..721504e0
--- /dev/null
+++ b/drivers/marvell/mci.c
@@ -0,0 +1,832 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* MCI bus driver for Marvell ARMADA 8K and 8K+ SoCs */
+
+#include <debug.h>
+#include <delay_timer.h>
+#include <mmio.h>
+#include <mci.h>
+#include <mvebu.h>
+#include <mvebu_def.h>
+#include <plat_marvell.h>
+
+/* /HB /Units /Direct_regs /Direct regs
+ * /Configuration Register Write/Read Data Register
+ */
+#define MCI_WRITE_READ_DATA_REG(mci_index)	\
+					MVEBU_MCI_REG_BASE_REMAP(mci_index)
+/* /HB /Units /Direct_regs /Direct regs
+ * /Configuration Register Access Command Register
+ */
+#define MCI_ACCESS_CMD_REG(mci_index)		\
+				(MVEBU_MCI_REG_BASE_REMAP(mci_index) + 0x4)
+
+/* Access Command fields :
+ * bit[3:0]   - Sub command: 1 => Peripheral Config Register Read,
+ *			     0 => Peripheral Config Register Write,
+ *			     2 => Peripheral Assign ID request,
+ *			     3 => Circular Config Write
+ * bit[5]     - 1 => Local (same chip access) 0 => Remote
+ * bit[15:8]  - Destination hop ID. Put Global ID (GID) here (see scheme below).
+ * bit[23:22] - 0x3 IHB PHY REG address space, 0x0 IHB Controller space
+ * bit[21:16] - Low 6 bits of offset. Hight 2 bits are taken from bit[28:27]
+ *		of IHB_PHY_CTRL
+ *		(must be set before any PHY register access occurs):
+ *		/IHB_REG /IHB_REGInterchip Hopping Bus Registers
+ *		/IHB Version Control Register
+ *
+ *		ixi_ihb_top		IHB PHY
+ *  AXI -----------------------------   -------------
+ *   <--| axi_hb_top | ihb_pipe_top |-->|           |
+ *   -->|   GID=1    |     GID=0    |<--|           |
+ *      -----------------------------   -------------
+ */
+#define MCI_INDIRECT_CTRL_READ_CMD		0x1
+#define MCI_INDIRECT_CTRL_ASSIGN_CMD		0x2
+#define MCI_INDIRECT_CTRL_CIRCULAR_CMD		0x3
+#define MCI_INDIRECT_CTRL_LOCAL_PKT		(1 << 5)
+#define MCI_INDIRECT_CTRL_CMD_DONE_OFFSET	6
+#define MCI_INDIRECT_CTRL_CMD_DONE		\
+				(1 << MCI_INDIRECT_CTRL_CMD_DONE_OFFSET)
+#define MCI_INDIRECT_CTRL_DATA_READY_OFFSET	7
+#define MCI_INDIRECT_CTRL_DATA_READY		\
+				(1 << MCI_INDIRECT_CTRL_DATA_READY_OFFSET)
+#define MCI_INDIRECT_CTRL_HOPID_OFFSET		8
+#define MCI_INDIRECT_CTRL_HOPID(id)		\
+			(((id) & 0xFF) << MCI_INDIRECT_CTRL_HOPID_OFFSET)
+#define MCI_INDIRECT_CTRL_REG_CHIPID_OFFSET	16
+#define MCI_INDIRECT_REG_CTRL_ADDR(reg_num)	\
+			(reg_num << MCI_INDIRECT_CTRL_REG_CHIPID_OFFSET)
+
+/* Hop ID values */
+#define GID_IHB_PIPE					0
+#define GID_AXI_HB					1
+#define GID_IHB_EXT					2
+
+#define MCI_DID_GLOBAL_ASSIGNMENT_REQUEST_REG		0x2
+/* Target MCi Local ID (LID, which is = self DID) */
+#define MCI_DID_GLOBAL_ASSIGN_REQ_MCI_LOCAL_ID(val)	(((val) & 0xFF) << 16)
+/* Bits [15:8]: Number of MCis on chip of target MCi */
+#define MCI_DID_GLOBAL_ASSIGN_REQ_MCI_COUNT(val)	(((val) & 0xFF) << 8)
+/* Bits [7:0]: Number of hops on chip of target MCi */
+#define MCI_DID_GLOBAL_ASSIGN_REQ_HOPS_NUM(val)		(((val) & 0xFF) << 0)
+
+/* IHB_REG domain registers */
+/* /HB /Units /IHB_REG /IHB_REGInterchip Hopping Bus Registers/
+ * Rx Memory Configuration Register (RX_MEM_CFG)
+ */
+#define MCI_CTRL_RX_MEM_CFG_REG_NUM			0x0
+#define MCI_CTRL_RX_TX_MEM_CFG_RQ_THRESH(val)		(((val) & 0xFF) << 24)
+#define MCI_CTRL_RX_TX_MEM_CFG_PQ_THRESH(val)		(((val) & 0xFF) << 16)
+#define MCI_CTRL_RX_TX_MEM_CFG_NQ_THRESH(val)		(((val) & 0xFF) << 8)
+#define MCI_CTRL_RX_TX_MEM_CFG_DELTA_THRESH(val)	(((val) & 0xF) << 4)
+#define MCI_CTRL_RX_TX_MEM_CFG_RTC(val)			(((val) & 0x3) << 2)
+#define MCI_CTRL_RX_TX_MEM_CFG_WTC(val)			(((val) & 0x3) << 0)
+#define MCI_CTRL_RX_MEM_CFG_REG_DEF_CP_VAL		\
+				(MCI_CTRL_RX_TX_MEM_CFG_RQ_THRESH(0x07) | \
+				MCI_CTRL_RX_TX_MEM_CFG_PQ_THRESH(0x3f) | \
+				MCI_CTRL_RX_TX_MEM_CFG_NQ_THRESH(0x3f) | \
+				MCI_CTRL_RX_TX_MEM_CFG_DELTA_THRESH(0xf) | \
+				MCI_CTRL_RX_TX_MEM_CFG_RTC(1) | \
+				MCI_CTRL_RX_TX_MEM_CFG_WTC(1))
+
+#define MCI_CTRL_RX_MEM_CFG_REG_DEF_AP_VAL		\
+				(MCI_CTRL_RX_TX_MEM_CFG_RQ_THRESH(0x3f) | \
+				MCI_CTRL_RX_TX_MEM_CFG_PQ_THRESH(0x03) | \
+				MCI_CTRL_RX_TX_MEM_CFG_NQ_THRESH(0x3f) | \
+				MCI_CTRL_RX_TX_MEM_CFG_DELTA_THRESH(0xf) | \
+				MCI_CTRL_RX_TX_MEM_CFG_RTC(1) | \
+				MCI_CTRL_RX_TX_MEM_CFG_WTC(1))
+
+
+/* /HB /Units /IHB_REG /IHB_REGInterchip Hopping Bus Registers/
+ * Tx Memory Configuration Register (TX_MEM_CFG)
+ */
+#define MCI_CTRL_TX_MEM_CFG_REG_NUM			0x1
+/* field mapping for TX mem config register
+ * are the same as for RX register - see register above
+ */
+#define MCI_CTRL_TX_MEM_CFG_REG_DEF_VAL			\
+				(MCI_CTRL_RX_TX_MEM_CFG_RQ_THRESH(0x20) | \
+				MCI_CTRL_RX_TX_MEM_CFG_PQ_THRESH(0x20) | \
+				MCI_CTRL_RX_TX_MEM_CFG_NQ_THRESH(0x20) | \
+				MCI_CTRL_RX_TX_MEM_CFG_DELTA_THRESH(2) | \
+				MCI_CTRL_RX_TX_MEM_CFG_RTC(1) | \
+				MCI_CTRL_RX_TX_MEM_CFG_WTC(1))
+
+/* /HB /Units /IHB_REG /IHB_REGInterchip Hopping Bus Registers
+ * /IHB Link CRC Control
+ */
+/* MCi Link CRC Control Register (MCi_CRC_CTRL) */
+#define MCI_LINK_CRC_CTRL_REG_NUM			0x4
+
+/* /HB /Units /IHB_REG /IHB_REGInterchip Hopping Bus Registers
+ * /IHB Status Register
+ */
+/* MCi Status Register (MCi_STS) */
+#define MCI_CTRL_STATUS_REG_NUM				0x5
+#define MCI_CTRL_STATUS_REG_PHY_READY			(1 << 12)
+#define MCI_CTRL_STATUS_REG_LINK_PRESENT		(1 << 15)
+#define MCI_CTRL_STATUS_REG_PHY_CID_VIO_OFFSET		24
+#define MCI_CTRL_STATUS_REG_PHY_CID_VIO_MASK		\
+				(0xF << MCI_CTRL_STATUS_REG_PHY_CID_VIO_OFFSET)
+/* Expected successful Link result, including reserved bit */
+#define MCI_CTRL_PHY_READY		(MCI_CTRL_STATUS_REG_PHY_READY | \
+					MCI_CTRL_STATUS_REG_LINK_PRESENT | \
+					MCI_CTRL_STATUS_REG_PHY_CID_VIO_MASK)
+
+/* /HB /Units /IHB_REG /IHB_REGInterchip Hopping Bus Registers/
+ * MCi PHY Speed Settings Register (MCi_PHY_SETTING)
+ */
+#define MCI_CTRL_MCI_PHY_SETTINGS_REG_NUM		0x8
+#define MCI_CTRL_MCI_PHY_SET_DLO_FIFO_FULL_TRESH(val)	(((val) & 0xF) << 28)
+#define MCI_CTRL_MCI_PHY_SET_PHY_MAX_SPEED(val)		(((val) & 0xF) << 12)
+#define MCI_CTRL_MCI_PHY_SET_PHYCLK_SEL(val)		(((val) & 0xF) << 8)
+#define MCI_CTRL_MCI_PHY_SET_REFCLK_FREQ_SEL(val)	(((val) & 0xF) << 4)
+#define MCI_CTRL_MCI_PHY_SET_AUTO_LINK_EN(val)		(((val) & 0x1) << 1)
+#define MCI_CTRL_MCI_PHY_SET_REG_DEF_VAL		\
+			(MCI_CTRL_MCI_PHY_SET_DLO_FIFO_FULL_TRESH(0x3) | \
+			MCI_CTRL_MCI_PHY_SET_PHY_MAX_SPEED(0x3) | \
+			MCI_CTRL_MCI_PHY_SET_PHYCLK_SEL(0x2) | \
+			MCI_CTRL_MCI_PHY_SET_REFCLK_FREQ_SEL(0x1))
+#define MCI_CTRL_MCI_PHY_SET_REG_DEF_VAL2		\
+			(MCI_CTRL_MCI_PHY_SET_DLO_FIFO_FULL_TRESH(0x3) | \
+			MCI_CTRL_MCI_PHY_SET_PHY_MAX_SPEED(0x3) | \
+			MCI_CTRL_MCI_PHY_SET_PHYCLK_SEL(0x5) | \
+			MCI_CTRL_MCI_PHY_SET_REFCLK_FREQ_SEL(0x1))
+
+/* /HB /Units /IHB_REG /IHB_REGInterchip Hopping Bus Registers
+ * /IHB Mode Config
+ */
+#define MCI_CTRL_IHB_MODE_CFG_REG_NUM			0x25
+#define MCI_CTRL_IHB_MODE_HBCLK_DIV(val)		((val) & 0xFF)
+#define MCI_CTRL_IHB_MODE_CHUNK_MOD_OFFSET		8
+#define MCI_CTRL_IHB_MODE_CHUNK_MOD			\
+				(1 << MCI_CTRL_IHB_MODE_CHUNK_MOD_OFFSET)
+#define MCI_CTRL_IHB_MODE_FWD_MOD_OFFSET		9
+#define MCI_CTRL_IHB_MODE_FWD_MOD			\
+				(1 << MCI_CTRL_IHB_MODE_FWD_MOD_OFFSET)
+#define MCI_CTRL_IHB_MODE_SEQFF_FINE_MOD(val)		(((val) & 0xF) << 12)
+#define MCI_CTRL_IHB_MODE_RX_COMB_THRESH(val)		(((val) & 0xFF) << 16)
+#define MCI_CTRL_IHB_MODE_TX_COMB_THRESH(val)		(((val) & 0xFF) << 24)
+
+#define MCI_CTRL_IHB_MODE_CFG_REG_DEF_VAL		\
+				(MCI_CTRL_IHB_MODE_HBCLK_DIV(6) | \
+				MCI_CTRL_IHB_MODE_FWD_MOD | \
+				MCI_CTRL_IHB_MODE_SEQFF_FINE_MOD(0xF) | \
+				MCI_CTRL_IHB_MODE_RX_COMB_THRESH(0x3f) | \
+				MCI_CTRL_IHB_MODE_TX_COMB_THRESH(0x40))
+/* AXI_HB registers */
+#define MCI_AXI_ACCESS_DATA_REG_NUM			0x0
+#define MCI_AXI_ACCESS_PCIE_MODE			1
+#define MCI_AXI_ACCESS_CACHE_CHECK_OFFSET		5
+#define MCI_AXI_ACCESS_CACHE_CHECK			\
+				(1 << MCI_AXI_ACCESS_CACHE_CHECK_OFFSET)
+#define MCI_AXI_ACCESS_FORCE_POST_WR_OFFSET		6
+#define MCI_AXI_ACCESS_FORCE_POST_WR			\
+				(1 << MCI_AXI_ACCESS_FORCE_POST_WR_OFFSET)
+#define MCI_AXI_ACCESS_DISABLE_CLK_GATING_OFFSET	9
+#define MCI_AXI_ACCESS_DISABLE_CLK_GATING		\
+				(1 << MCI_AXI_ACCESS_DISABLE_CLK_GATING_OFFSET)
+
+/* /HB /Units /HB_REG /HB_REGHopping Bus Registers
+ * /Window 0 Address Mask Register
+ */
+#define MCI_HB_CTRL_WIN0_ADDRESS_MASK_REG_NUM		0x2
+
+/* /HB /Units /HB_REG /HB_REGHopping Bus Registers
+ * /Window 0 Destination Register
+ */
+#define MCI_HB_CTRL_WIN0_DESTINATION_REG_NUM		0x3
+#define MCI_HB_CTRL_WIN0_DEST_VALID_FLAG(val)		(((val) & 0x1) << 16)
+#define MCI_HB_CTRL_WIN0_DEST_ID(val)			(((val) & 0xFF) << 0)
+
+/* /HB /Units /HB_REG /HB_REGHopping Bus Registers /Tx Control Register */
+#define MCI_HB_CTRL_TX_CTRL_REG_NUM			0xD
+#define MCI_HB_CTRL_TX_CTRL_PCIE_MODE_OFFSET		24
+#define MCI_HB_CTRL_TX_CTRL_PCIE_MODE			\
+				(1 << MCI_HB_CTRL_TX_CTRL_PCIE_MODE_OFFSET)
+#define MCI_HB_CTRL_TX_CTRL_PRI_TH_QOS(val)		(((val) & 0xF) << 12)
+#define MCI_HB_CTRL_TX_CTRL_MAX_RD_CNT(val)		(((val) & 0x1F) << 6)
+#define MCI_HB_CTRL_TX_CTRL_MAX_WR_CNT(val)		(((val) & 0x1F) << 0)
+
+/* /HB /Units /IHB_REG /IHB_REGInterchip Hopping Bus Registers
+ * /IHB Version Control Register
+ */
+#define MCI_PHY_CTRL_REG_NUM				0x7
+#define MCI_PHY_CTRL_MCI_MINOR				0x8 /* BITS [3:0] */
+#define MCI_PHY_CTRL_MCI_MAJOR_OFFSET			4
+#define MCI_PHY_CTRL_MCI_MAJOR				\
+				(1 << MCI_PHY_CTRL_MCI_MAJOR_OFFSET)
+#define MCI_PHY_CTRL_MCI_SLEEP_REQ_OFFSET		11
+#define MCI_PHY_CTRL_MCI_SLEEP_REQ			\
+				(1 << MCI_PHY_CTRL_MCI_SLEEP_REQ_OFFSET)
+/* Host=1 / Device=0 PHY mode */
+#define MCI_PHY_CTRL_MCI_PHY_MODE_OFFSET		24
+#define MCI_PHY_CTRL_MCI_PHY_MODE_HOST			\
+				(1 << MCI_PHY_CTRL_MCI_PHY_MODE_OFFSET)
+/* Register=1 / PWM=0 interface */
+#define MCI_PHY_CTRL_MCI_PHY_REG_IF_MODE_OFFSET		25
+#define MCI_PHY_CTRL_MCI_PHY_REG_IF_MODE		\
+				(1 << MCI_PHY_CTRL_MCI_PHY_REG_IF_MODE_OFFSET)
+ /* PHY code InReset=1 */
+#define MCI_PHY_CTRL_MCI_PHY_RESET_CORE_OFFSET		26
+#define MCI_PHY_CTRL_MCI_PHY_RESET_CORE			\
+				(1 << MCI_PHY_CTRL_MCI_PHY_RESET_CORE_OFFSET)
+#define MCI_PHY_CTRL_PHY_ADDR_MSB_OFFSET		27
+#define MCI_PHY_CTRL_PHY_ADDR_MSB(addr)			\
+				(((addr) & 0x3) << \
+				MCI_PHY_CTRL_PHY_ADDR_MSB_OFFSET)
+#define MCI_PHY_CTRL_PIDI_MODE_OFFSET			31
+#define MCI_PHY_CTRL_PIDI_MODE				\
+				(1 << MCI_PHY_CTRL_PIDI_MODE_OFFSET)
+
+/* Number of times to wait for the MCI link ready after MCI configurations
+ * Normally takes 34-35 successive reads
+ */
+#define LINK_READY_TIMEOUT				100
+
+enum mci_register_type {
+	MCI_REG_TYPE_PHY = 0,
+	MCI_REG_TYPE_CTRL,
+};
+
+enum {
+	MCI_CMD_WRITE,
+	MCI_CMD_READ
+};
+
+/* Write wrapper callback for debug:
+ * will print written data in case LOG_LEVEL >= 40
+ */
+static void mci_mmio_write_32(uintptr_t addr, uint32_t value)
+{
+	VERBOSE("Write:\t0x%x = 0x%x\n", (uint32_t)addr, value);
+	mmio_write_32(addr, value);
+}
+/* Read wrapper callback for debug:
+ * will print read data in case LOG_LEVEL >= 40
+ */
+static uint32_t mci_mmio_read_32(uintptr_t addr)
+{
+	uint32_t value;
+
+	value = mmio_read_32(addr);
+	VERBOSE("Read:\t0x%x = 0x%x\n", (uint32_t)addr, value);
+	return value;
+}
+
+/* MCI indirect access command completion polling:
+ * Each write/read command done via MCI indirect registers must be polled
+ * for command completions status.
+ *
+ * Returns 1 in case of error
+ * Returns 0 in case of command completed successfully.
+ */
+static int mci_poll_command_completion(int mci_index, int command_type)
+{
+	uint32_t mci_cmd_value = 0, retry_count = 100, ret = 0;
+	uint32_t completion_flags = MCI_INDIRECT_CTRL_CMD_DONE;
+
+	debug_enter();
+	/* Read commands require validating that requested data is ready */
+	if (command_type == MCI_CMD_READ)
+		completion_flags |= MCI_INDIRECT_CTRL_DATA_READY;
+
+	do {
+		/* wait 1 ms before each polling */
+		mdelay(1);
+		mci_cmd_value = mci_mmio_read_32(MCI_ACCESS_CMD_REG(mci_index));
+	} while (((mci_cmd_value & completion_flags) != completion_flags) &&
+			 (retry_count-- > 0));
+
+	if (retry_count == 0) {
+		ERROR("%s: MCI command timeout (command status = 0x%x)\n",
+		      __func__, mci_cmd_value);
+		ret = 1;
+	}
+
+	debug_exit();
+	return ret;
+}
+
+int mci_read(int mci_idx, uint32_t cmd, uint32_t *value)
+{
+	int rval;
+
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_idx), cmd);
+
+	rval = mci_poll_command_completion(mci_idx, MCI_CMD_READ);
+
+	*value = mci_mmio_read_32(MCI_WRITE_READ_DATA_REG(mci_idx));
+
+	return rval;
+}
+
+int  mci_write(int mci_idx, uint32_t cmd, uint32_t data)
+{
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_idx), data);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_idx), cmd);
+
+	return mci_poll_command_completion(mci_idx, MCI_CMD_WRITE);
+}
+
+/* Perform 3 configurations in one command: PCI mode,
+ * queues separation and cache bit
+ */
+static int mci_axi_set_pcie_mode(int mci_index)
+{
+	uint32_t reg_data, ret = 1;
+
+	debug_enter();
+	/* This configuration makes MCI IP behave consistently with AXI protocol
+	 * It should be configured at one side only (for example locally at AP).
+	 * The IP takes care of performing the same configurations at MCI on
+	 * another side (for example remotely at CP).
+	 */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index),
+			  MCI_AXI_ACCESS_PCIE_MODE |
+			  MCI_AXI_ACCESS_CACHE_CHECK |
+			  MCI_AXI_ACCESS_FORCE_POST_WR |
+			  MCI_AXI_ACCESS_DISABLE_CLK_GATING);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_AXI_ACCESS_DATA_REG_NUM)  |
+			  MCI_INDIRECT_CTRL_HOPID(GID_AXI_HB) |
+			  MCI_INDIRECT_CTRL_LOCAL_PKT |
+			  MCI_INDIRECT_CTRL_CIRCULAR_CMD);
+
+	/* if Write command was successful, verify PCIe mode */
+	if (mci_poll_command_completion(mci_index, MCI_CMD_WRITE) == 0) {
+		/* Verify the PCIe mode selected */
+		mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+				  MCI_INDIRECT_REG_CTRL_ADDR(
+					MCI_HB_CTRL_TX_CTRL_REG_NUM)  |
+				  MCI_INDIRECT_CTRL_HOPID(GID_AXI_HB) |
+				  MCI_INDIRECT_CTRL_LOCAL_PKT |
+				  MCI_INDIRECT_CTRL_READ_CMD);
+		/* if read was completed, verify PCIe mode */
+		if (mci_poll_command_completion(mci_index, MCI_CMD_READ) == 0) {
+			reg_data = mci_mmio_read_32(
+					MCI_WRITE_READ_DATA_REG(mci_index));
+			if (reg_data & MCI_HB_CTRL_TX_CTRL_PCIE_MODE)
+				ret = 0;
+		}
+	}
+
+	debug_exit();
+	return ret;
+}
+
+/* Reduce sequence FIFO timer expiration threshold */
+static int mci_axi_set_fifo_thresh(int mci_index)
+{
+	uint32_t reg_data, ret = 0;
+
+	debug_enter();
+	/* This configuration reduces sequence FIFO timer expiration threshold
+	 * (to 0x7 instead of 0xA).
+	 * In MCI 1.6 version this configuration prevents possible functional
+	 * issues.
+	 * In version 1.82 the configuration prevents performance degradation
+	 */
+
+	/* Configure local AP side */
+	reg_data = MCI_PHY_CTRL_PIDI_MODE |
+		   MCI_PHY_CTRL_MCI_PHY_REG_IF_MODE |
+		   MCI_PHY_CTRL_MCI_PHY_MODE_HOST |
+		   MCI_PHY_CTRL_MCI_MAJOR |
+		   MCI_PHY_CTRL_MCI_MINOR;
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index), reg_data);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(MCI_PHY_CTRL_REG_NUM) |
+			  MCI_INDIRECT_CTRL_LOCAL_PKT);
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* Reduce the threshold */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index),
+			  MCI_CTRL_IHB_MODE_CFG_REG_DEF_VAL);
+
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_CTRL_IHB_MODE_CFG_REG_NUM) |
+			  MCI_INDIRECT_CTRL_LOCAL_PKT);
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* Exit PIDI mode */
+	reg_data = MCI_PHY_CTRL_MCI_PHY_REG_IF_MODE |
+		   MCI_PHY_CTRL_MCI_PHY_MODE_HOST |
+		   MCI_PHY_CTRL_MCI_MAJOR |
+		   MCI_PHY_CTRL_MCI_MINOR;
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index), reg_data);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(MCI_PHY_CTRL_REG_NUM) |
+			  MCI_INDIRECT_CTRL_LOCAL_PKT);
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* Configure remote CP side */
+	reg_data = MCI_PHY_CTRL_PIDI_MODE |
+		   MCI_PHY_CTRL_MCI_MAJOR |
+		   MCI_PHY_CTRL_MCI_MINOR |
+		   MCI_PHY_CTRL_MCI_PHY_REG_IF_MODE;
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index), reg_data);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(MCI_PHY_CTRL_REG_NUM) |
+			  MCI_CTRL_IHB_MODE_FWD_MOD);
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* Reduce the threshold */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index),
+			  MCI_CTRL_IHB_MODE_CFG_REG_DEF_VAL);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_CTRL_IHB_MODE_CFG_REG_NUM) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_IHB_EXT));
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* Exit PIDI mode */
+	reg_data = MCI_PHY_CTRL_MCI_MAJOR |
+		   MCI_PHY_CTRL_MCI_MINOR |
+		   MCI_PHY_CTRL_MCI_PHY_REG_IF_MODE;
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index), reg_data);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(MCI_PHY_CTRL_REG_NUM) |
+			  MCI_CTRL_IHB_MODE_FWD_MOD);
+
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	debug_exit();
+	return ret;
+}
+
+/* Configure:
+ * 1. AP & CP TX thresholds and delta configurations
+ * 2. DLO & DLI FIFO full threshold
+ * 3. RX thresholds and delta configurations
+ * 4. CP AR and AW outstanding
+ * 5. AP AR and AW outstanding
+ */
+static int mci_axi_set_fifo_rx_tx_thresh(int mci_index)
+{
+	uint32_t ret = 0;
+
+	debug_enter();
+	/* AP TX thresholds and delta configurations (IHB_reg 0x1) */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index),
+			  MCI_CTRL_TX_MEM_CFG_REG_DEF_VAL);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_CTRL_TX_MEM_CFG_REG_NUM) |
+			  MCI_INDIRECT_CTRL_LOCAL_PKT);
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* CP TX thresholds and delta configurations (IHB_reg 0x1) */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index),
+			  MCI_CTRL_TX_MEM_CFG_REG_DEF_VAL);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_CTRL_TX_MEM_CFG_REG_NUM) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_IHB_EXT));
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* AP DLO & DLI FIFO full threshold & Auto-Link enable (IHB_reg 0x8) */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index),
+			  MCI_CTRL_MCI_PHY_SET_REG_DEF_VAL |
+			  MCI_CTRL_MCI_PHY_SET_AUTO_LINK_EN(1));
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_CTRL_MCI_PHY_SETTINGS_REG_NUM) |
+			  MCI_INDIRECT_CTRL_LOCAL_PKT);
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* CP DLO & DLI FIFO full threshold (IHB_reg 0x8) */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index),
+			  MCI_CTRL_MCI_PHY_SET_REG_DEF_VAL);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_CTRL_MCI_PHY_SETTINGS_REG_NUM) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_IHB_EXT));
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* AP RX thresholds and delta configurations (IHB_reg 0x0) */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index),
+			  MCI_CTRL_RX_MEM_CFG_REG_DEF_AP_VAL);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_CTRL_RX_MEM_CFG_REG_NUM) |
+			  MCI_INDIRECT_CTRL_LOCAL_PKT);
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* CP RX thresholds and delta configurations (IHB_reg 0x0) */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index),
+			  MCI_CTRL_RX_MEM_CFG_REG_DEF_CP_VAL);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_CTRL_RX_MEM_CFG_REG_NUM) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_IHB_EXT));
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* AP AR & AW maximum AXI outstanding request cfg (HB_reg 0xd) */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index),
+			  MCI_HB_CTRL_TX_CTRL_PRI_TH_QOS(8) |
+			  MCI_HB_CTRL_TX_CTRL_MAX_RD_CNT(3) |
+			  MCI_HB_CTRL_TX_CTRL_MAX_WR_CNT(3));
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_HB_CTRL_TX_CTRL_REG_NUM) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_AXI_HB) |
+			  MCI_INDIRECT_CTRL_LOCAL_PKT);
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* CP AR & AW maximum AXI outstanding request cfg (HB_reg 0xd) */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(mci_index),
+			  MCI_HB_CTRL_TX_CTRL_PRI_TH_QOS(8) |
+			  MCI_HB_CTRL_TX_CTRL_MAX_RD_CNT(0xB) |
+			  MCI_HB_CTRL_TX_CTRL_MAX_WR_CNT(0x11));
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(mci_index),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_HB_CTRL_TX_CTRL_REG_NUM) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_IHB_EXT) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_AXI_HB));
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	debug_exit();
+	return ret;
+}
+
+/* configure MCI to allow read & write transactions to arrive at the same time.
+ * Without the below configuration, MCI won't sent response to CPU for
+ * transactions which arrived simultaneously and will lead to CPU hang.
+ * The below will configure MCI to be able to pass transactions from/to CP/AP.
+ */
+static int mci_enable_simultaneous_transactions(int mci_index)
+{
+	uint32_t ret = 0;
+
+	debug_enter();
+	/* ID assignment (assigning global ID offset to CP) */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(0),
+			  MCI_DID_GLOBAL_ASSIGN_REQ_MCI_LOCAL_ID(2) |
+			  MCI_DID_GLOBAL_ASSIGN_REQ_MCI_COUNT(2) |
+			  MCI_DID_GLOBAL_ASSIGN_REQ_HOPS_NUM(2));
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(0),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_DID_GLOBAL_ASSIGNMENT_REQUEST_REG) |
+			  MCI_INDIRECT_CTRL_ASSIGN_CMD);
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* Assigning dest. ID=3 to all transactions entering from AXI at AP */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(0),
+			  MCI_HB_CTRL_WIN0_DEST_VALID_FLAG(1) |
+			  MCI_HB_CTRL_WIN0_DEST_ID(3));
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(0),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_HB_CTRL_WIN0_DESTINATION_REG_NUM) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_AXI_HB) |
+			  MCI_INDIRECT_CTRL_LOCAL_PKT);
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* Assigning dest. ID=1 to all transactions entering from AXI at CP */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(0),
+			  MCI_HB_CTRL_WIN0_DEST_VALID_FLAG(1) |
+			  MCI_HB_CTRL_WIN0_DEST_ID(1));
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(0),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_HB_CTRL_WIN0_DESTINATION_REG_NUM) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_IHB_EXT) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_AXI_HB));
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* End address to all transactions entering from AXI at AP.
+	 * This will lead to get match for any AXI address
+	 * and receive destination ID=3
+	 */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(0), 0xffffffff);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(0),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_HB_CTRL_WIN0_ADDRESS_MASK_REG_NUM) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_AXI_HB) |
+			  MCI_INDIRECT_CTRL_LOCAL_PKT);
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	/* End address to all transactions entering from AXI at CP.
+	 * This will lead to get match for any AXI address
+	 * and receive destination ID=1
+	 */
+	mci_mmio_write_32(MCI_WRITE_READ_DATA_REG(0), 0xffffffff);
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(0),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_HB_CTRL_WIN0_ADDRESS_MASK_REG_NUM) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_IHB_EXT) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_AXI_HB));
+	ret |= mci_poll_command_completion(mci_index, MCI_CMD_WRITE);
+
+	debug_exit();
+	return ret;
+}
+
+/* Check if MCI simultaneous transaction was already enabled.
+ * Currently bootrom does this mci configuration only when the boot source is
+ * SAR_MCIX4, in other cases it should be done at this stage.
+ * It is worth noticing that in case of booting from uart, the bootrom
+ * flow is different and this mci initialization is skipped even if boot
+ * source is SAR_MCIX4. Therefore new verification bases on appropriate mci's
+ * register content: if the appropriate reg contains 0x0 it means that the
+ * bootrom didn't perform required mci configuration.
+ *
+ * Returns:
+ * 0 - configuration already done
+ * 1 - configuration missing
+ */
+static _Bool mci_simulatenous_trans_missing(int mci_index)
+{
+	uint32_t reg, ret;
+
+	/* read 'Window 0 Destination ID assignment' from HB register 0x3
+	 * (TX_CFG_W0_DST_ID) to check whether ID assignment was already
+	 * performed by BootROM.
+	 */
+	debug_enter();
+	mci_mmio_write_32(MCI_ACCESS_CMD_REG(0),
+			  MCI_INDIRECT_REG_CTRL_ADDR(
+				MCI_HB_CTRL_WIN0_DESTINATION_REG_NUM) |
+			  MCI_INDIRECT_CTRL_HOPID(GID_AXI_HB) |
+			  MCI_INDIRECT_CTRL_LOCAL_PKT |
+			  MCI_INDIRECT_CTRL_READ_CMD);
+	ret = mci_poll_command_completion(mci_index, MCI_CMD_READ);
+
+	reg = mci_mmio_read_32(MCI_WRITE_READ_DATA_REG(mci_index));
+
+	if (ret)
+		ERROR("Failed to verify MCI simultaneous read/write status\n");
+
+	debug_exit();
+	/* default ID assignment is 0, so if register doesn't contain zeros
+	 * it means that bootrom already performed required configuration.
+	 */
+	if (reg != 0)
+		return 0;
+
+	return 1;
+}
+
+/* For A1 revision, configure the MCI link for performance improvement:
+ * - set MCI to support read/write transactions to arrive at the same time
+ * - Switch AXI to PCIe mode
+ * - Reduce sequence FIFO threshold
+ * - Configure RX/TX FIFO thresholds
+ *
+ *   Note:
+ *   We don't exit on error code from any sub routine, to try (best effort) to
+ *   complete the MCI configuration.
+ *   (If we exit - Bootloader will surely fail to boot)
+ */
+int mci_configure(int mci_index)
+{
+	int rval;
+
+	debug_enter();
+	/* According to design guidelines the MCI simultaneous transaction
+	 * shouldn't be enabled more then once - therefore make sure that it
+	 * wasn't already enabled in bootrom.
+	 */
+	if (mci_simulatenous_trans_missing(mci_index)) {
+		VERBOSE("Enabling MCI simultaneous transaction\n");
+		/* set MCI to support read/write transactions
+		 * to arrive at the same time
+		 */
+		rval = mci_enable_simultaneous_transactions(mci_index);
+		if (rval)
+			ERROR("Failed to set MCI simultaneous read/write\n");
+	} else
+		VERBOSE("Skip MCI ID assignment - already done by bootrom\n");
+
+	/* Configure MCI for more consistent behavior with AXI protocol */
+	rval = mci_axi_set_pcie_mode(mci_index);
+	if (rval)
+		ERROR("Failed to set MCI to AXI PCIe mode\n");
+
+	/* reduce FIFO global threshold */
+	rval = mci_axi_set_fifo_thresh(mci_index);
+	if (rval)
+		ERROR("Failed to set MCI FIFO global threshold\n");
+
+	/* configure RX/TX FIFO thresholds */
+	rval = mci_axi_set_fifo_rx_tx_thresh(mci_index);
+	if (rval)
+		ERROR("Failed to set MCI RX/TX FIFO threshold\n");
+
+	debug_exit();
+	return 1;
+}
+
+int mci_get_link_status(void)
+{
+	uint32_t cmd, data;
+
+	cmd = (MCI_INDIRECT_REG_CTRL_ADDR(MCI_CTRL_STATUS_REG_NUM) |
+		MCI_INDIRECT_CTRL_LOCAL_PKT | MCI_INDIRECT_CTRL_READ_CMD);
+	if (mci_read(0, cmd, &data)) {
+		ERROR("Failed to read status register\n");
+		return -1;
+	}
+
+	/* Check if the link is ready */
+	if (data != MCI_CTRL_PHY_READY) {
+		ERROR("Bad link status %x\n", data);
+		return -1;
+	}
+
+	return 0;
+}
+
+void mci_turn_link_down(void)
+{
+	uint32_t cmd, data;
+	int rval = 0;
+
+	debug_enter();
+
+	/* Turn off auto-link */
+	cmd = (MCI_INDIRECT_REG_CTRL_ADDR(MCI_CTRL_MCI_PHY_SETTINGS_REG_NUM) |
+			MCI_INDIRECT_CTRL_LOCAL_PKT);
+	data = (MCI_CTRL_MCI_PHY_SET_REG_DEF_VAL2 |
+		MCI_CTRL_MCI_PHY_SET_AUTO_LINK_EN(0));
+	rval = mci_write(0, cmd, data);
+	if (rval)
+		ERROR("Failed to turn off auto-link\n");
+
+	/* Reset AP PHY */
+	cmd = (MCI_INDIRECT_REG_CTRL_ADDR(MCI_PHY_CTRL_REG_NUM) |
+		MCI_INDIRECT_CTRL_LOCAL_PKT);
+	data = (MCI_PHY_CTRL_MCI_MINOR |
+		MCI_PHY_CTRL_MCI_MAJOR |
+		MCI_PHY_CTRL_MCI_PHY_MODE_HOST |
+		MCI_PHY_CTRL_MCI_PHY_RESET_CORE);
+	rval = mci_write(0, cmd, data);
+	if (rval)
+		ERROR("Failed to reset AP PHY\n");
+
+	/* Clear all status & CRC values */
+	cmd = (MCI_INDIRECT_REG_CTRL_ADDR(MCI_LINK_CRC_CTRL_REG_NUM) |
+	       MCI_INDIRECT_CTRL_LOCAL_PKT);
+	data = 0x0;
+	mci_write(0, cmd, data);
+	cmd = (MCI_INDIRECT_REG_CTRL_ADDR(MCI_CTRL_STATUS_REG_NUM) |
+	       MCI_INDIRECT_CTRL_LOCAL_PKT);
+	data = 0x0;
+	rval = mci_write(0, cmd, data);
+	if (rval)
+		ERROR("Failed to reset AP PHY\n");
+
+	/* Wait 5ms before un-reset the PHY */
+	mdelay(5);
+
+	/* Un-reset AP PHY */
+	cmd = (MCI_INDIRECT_REG_CTRL_ADDR(MCI_PHY_CTRL_REG_NUM) |
+	       MCI_INDIRECT_CTRL_LOCAL_PKT);
+	data = (MCI_PHY_CTRL_MCI_MINOR | MCI_PHY_CTRL_MCI_MAJOR |
+		MCI_PHY_CTRL_MCI_PHY_MODE_HOST);
+	rval = mci_write(0, cmd, data);
+	if (rval)
+		ERROR("Failed to un-reset AP PHY\n");
+
+	debug_exit();
+}
+
+void mci_turn_link_on(void)
+{
+	uint32_t cmd, data;
+	int rval = 0;
+
+	debug_enter();
+	/* Turn on auto-link */
+	cmd = (MCI_INDIRECT_REG_CTRL_ADDR(MCI_CTRL_MCI_PHY_SETTINGS_REG_NUM) |
+			MCI_INDIRECT_CTRL_LOCAL_PKT);
+	data = (MCI_CTRL_MCI_PHY_SET_REG_DEF_VAL2 |
+		MCI_CTRL_MCI_PHY_SET_AUTO_LINK_EN(1));
+	rval = mci_write(0, cmd, data);
+	if (rval)
+		ERROR("Failed to turn on auto-link\n");
+
+	debug_exit();
+}
+
+/* Initialize MCI for performance improvements */
+int mci_initialize(int mci_index)
+{
+	int ret;
+
+	debug_enter();
+	INFO("MCI%d initialization:\n", mci_index);
+
+	ret = mci_configure(mci_index);
+
+	debug_exit();
+	return ret;
+}
diff --git a/drivers/marvell/mochi/ap807_setup.c b/drivers/marvell/mochi/ap807_setup.c
new file mode 100644
index 00000000..075ca31f
--- /dev/null
+++ b/drivers/marvell/mochi/ap807_setup.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* AP807 Marvell SoC driver */
+
+#include <ap_setup.h>
+#include <cache_llc.h>
+#include <ccu.h>
+#include <debug.h>
+#include <io_win.h>
+#include <mci.h>
+#include <mmio.h>
+#include <mvebu_def.h>
+
+#define SMMU_sACR				(MVEBU_SMMU_BASE + 0x10)
+#define SMMU_sACR_PG_64K			(1 << 16)
+
+#define CCU_GSPMU_CR				(MVEBU_CCU_BASE(MVEBU_AP0) \
+								+ 0x3F0)
+#define GSPMU_CPU_CONTROL			(0x1 << 0)
+
+#define CCU_HTC_CR				(MVEBU_CCU_BASE(MVEBU_AP0) \
+								+ 0x200)
+#define CCU_SET_POC_OFFSET			5
+
+#define DSS_CR0					(MVEBU_RFU_BASE + 0x100)
+#define DVM_48BIT_VA_ENABLE			(1 << 21)
+
+/* Secure MoChi incoming access */
+#define SEC_MOCHI_IN_ACC_REG			(MVEBU_RFU_BASE + 0x4738)
+#define SEC_MOCHI_IN_ACC_IHB0_EN		(1)
+#define SEC_MOCHI_IN_ACC_IHB1_EN		(1 << 3)
+#define SEC_MOCHI_IN_ACC_IHB2_EN		(1 << 6)
+#define SEC_MOCHI_IN_ACC_PIDI_EN		(1 << 9)
+#define SEC_IN_ACCESS_ENA_ALL_MASTERS		(SEC_MOCHI_IN_ACC_IHB0_EN | \
+						 SEC_MOCHI_IN_ACC_IHB1_EN | \
+						 SEC_MOCHI_IN_ACC_IHB2_EN | \
+						 SEC_MOCHI_IN_ACC_PIDI_EN)
+
+/* SYSRST_OUTn Config definitions */
+#define MVEBU_SYSRST_OUT_CONFIG_REG		(MVEBU_MISC_SOC_BASE + 0x4)
+#define WD_MASK_SYS_RST_OUT			(1 << 2)
+
+/* DSS PHY for DRAM */
+#define DSS_SCR_REG				(MVEBU_RFU_BASE + 0x208)
+#define DSS_PPROT_OFFS				4
+#define DSS_PPROT_MASK				0x7
+#define DSS_PPROT_PRIV_SECURE_DATA		0x1
+
+/* Used for Units of AP-807 (e.g. SDIO and etc) */
+#define MVEBU_AXI_ATTR_BASE			(MVEBU_REGS_BASE + 0x6F4580)
+#define MVEBU_AXI_ATTR_REG(index)		(MVEBU_AXI_ATTR_BASE + \
+							0x4 * index)
+
+enum axi_attr {
+	AXI_SDIO_ATTR = 0,
+	AXI_DFX_ATTR,
+	AXI_MAX_ATTR,
+};
+
+static void ap_sec_masters_access_en(uint32_t enable)
+{
+	uint32_t reg;
+
+	/* Open/Close incoming access for all masters.
+	 * The access is disabled in trusted boot mode
+	 * Could only be done in EL3
+	 */
+	reg = mmio_read_32(SEC_MOCHI_IN_ACC_REG);
+	if (enable)
+		mmio_write_32(SEC_MOCHI_IN_ACC_REG, reg |
+			      SEC_IN_ACCESS_ENA_ALL_MASTERS);
+	else
+		mmio_write_32(SEC_MOCHI_IN_ACC_REG,
+			      reg & ~SEC_IN_ACCESS_ENA_ALL_MASTERS);
+}
+
+static void setup_smmu(void)
+{
+	uint32_t reg;
+
+	/* Set the SMMU page size to 64 KB */
+	reg = mmio_read_32(SMMU_sACR);
+	reg |= SMMU_sACR_PG_64K;
+	mmio_write_32(SMMU_sACR, reg);
+}
+
+static void init_aurora2(void)
+{
+	uint32_t reg;
+
+	/* Enable GSPMU control by CPU */
+	reg = mmio_read_32(CCU_GSPMU_CR);
+	reg |= GSPMU_CPU_CONTROL;
+	mmio_write_32(CCU_GSPMU_CR, reg);
+
+#if LLC_ENABLE
+	/* Enable LLC for AP807 in exclusive mode */
+	llc_enable(0, 1);
+
+	/* Set point of coherency to DDR.
+	 * This is required by units which have
+	 * SW cache coherency
+	 */
+	reg = mmio_read_32(CCU_HTC_CR);
+	reg |= (0x1 << CCU_SET_POC_OFFSET);
+	mmio_write_32(CCU_HTC_CR, reg);
+#endif /* LLC_ENABLE */
+}
+
+
+/* MCIx indirect access register are based by default at 0xf4000000/0xf6000000
+ * to avoid conflict of internal registers of units connected via MCIx, which
+ * can be based on the same address (i.e CP1 base is also 0xf4000000),
+ * the following routines remaps the MCIx indirect bases to another domain
+ */
+static void mci_remap_indirect_access_base(void)
+{
+	uint32_t mci;
+
+	for (mci = 0; mci < MCI_MAX_UNIT_ID; mci++)
+		mmio_write_32(MCIX4_REG_START_ADDRESS_REG(mci),
+				  MVEBU_MCI_REG_BASE_REMAP(mci) >>
+				  MCI_REMAP_OFF_SHIFT);
+}
+
+static void ap807_axi_attr_init(void)
+{
+	uint32_t index, data;
+
+	/* Initialize AXI attributes for AP807 */
+	/* Go over the AXI attributes and set Ax-Cache and Ax-Domain */
+	for (index = 0; index < AXI_MAX_ATTR; index++) {
+		switch (index) {
+		/* DFX works with no coherent only -
+		 * there's no option to configure the Ax-Cache and Ax-Domain
+		 */
+		case AXI_DFX_ATTR:
+			continue;
+		default:
+			/* Set Ax-Cache as cacheable, no allocate, modifiable,
+			 * bufferable.
+			 * The values are different because Read & Write
+			 * definition is different in Ax-Cache
+			 */
+			data = mmio_read_32(MVEBU_AXI_ATTR_REG(index));
+			data &= ~MVEBU_AXI_ATTR_ARCACHE_MASK;
+			data |= (CACHE_ATTR_WRITE_ALLOC |
+				 CACHE_ATTR_CACHEABLE   |
+				 CACHE_ATTR_BUFFERABLE) <<
+				 MVEBU_AXI_ATTR_ARCACHE_OFFSET;
+			data &= ~MVEBU_AXI_ATTR_AWCACHE_MASK;
+			data |= (CACHE_ATTR_READ_ALLOC |
+				 CACHE_ATTR_CACHEABLE  |
+				 CACHE_ATTR_BUFFERABLE) <<
+				 MVEBU_AXI_ATTR_AWCACHE_OFFSET;
+			/* Set Ax-Domain as Outer domain */
+			data &= ~MVEBU_AXI_ATTR_ARDOMAIN_MASK;
+			data |= DOMAIN_OUTER_SHAREABLE <<
+				MVEBU_AXI_ATTR_ARDOMAIN_OFFSET;
+			data &= ~MVEBU_AXI_ATTR_AWDOMAIN_MASK;
+			data |= DOMAIN_OUTER_SHAREABLE <<
+				MVEBU_AXI_ATTR_AWDOMAIN_OFFSET;
+			mmio_write_32(MVEBU_AXI_ATTR_REG(index), data);
+		}
+	}
+}
+
+static void misc_soc_configurations(void)
+{
+	uint32_t reg;
+
+	/* Enable 48-bit VA */
+	mmio_setbits_32(DSS_CR0, DVM_48BIT_VA_ENABLE);
+
+	/* Un-mask Watchdog reset from influencing the SYSRST_OUTn.
+	 * Otherwise, upon WD timeout, the WD reset signal won't trigger reset
+	 */
+	reg = mmio_read_32(MVEBU_SYSRST_OUT_CONFIG_REG);
+	reg &= ~(WD_MASK_SYS_RST_OUT);
+	mmio_write_32(MVEBU_SYSRST_OUT_CONFIG_REG, reg);
+}
+
+void ap_init(void)
+{
+	/* Setup Aurora2. */
+	init_aurora2();
+
+	/* configure MCI mapping */
+	mci_remap_indirect_access_base();
+
+	/* configure IO_WIN windows */
+	init_io_win(MVEBU_AP0);
+
+	/* configure CCU windows */
+	init_ccu(MVEBU_AP0);
+
+	/* configure the SMMU */
+	setup_smmu();
+
+	/* Open AP incoming access for all masters */
+	ap_sec_masters_access_en(1);
+
+	/* configure axi for AP */
+	ap807_axi_attr_init();
+
+	/* misc configuration of the SoC */
+	misc_soc_configurations();
+}
+
+static void ap807_dram_phy_access_config(void)
+{
+	uint32_t reg_val;
+	/* Update DSS port access permission to DSS_PHY */
+	reg_val = mmio_read_32(DSS_SCR_REG);
+	reg_val &= ~(DSS_PPROT_MASK << DSS_PPROT_OFFS);
+	reg_val |= ((DSS_PPROT_PRIV_SECURE_DATA & DSS_PPROT_MASK) <<
+		    DSS_PPROT_OFFS);
+	mmio_write_32(DSS_SCR_REG, reg_val);
+}
+
+void ap_ble_init(void)
+{
+	/* Enable DSS port */
+	ap807_dram_phy_access_config();
+}
+
+int ap_get_count(void)
+{
+	return 1;
+}
+
+
diff --git a/drivers/marvell/mochi/apn806_setup.c b/drivers/marvell/mochi/apn806_setup.c
new file mode 100644
index 00000000..1d33be93
--- /dev/null
+++ b/drivers/marvell/mochi/apn806_setup.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* AP806 Marvell SoC driver */
+
+#include <ap_setup.h>
+#include <ccu.h>
+#include <cache_llc.h>
+#include <debug.h>
+#include <io_win.h>
+#include <mci.h>
+#include <mmio.h>
+#include <mvebu_def.h>
+
+#define SMMU_sACR				(MVEBU_SMMU_BASE + 0x10)
+#define SMMU_sACR_PG_64K			(1 << 16)
+
+#define CCU_GSPMU_CR				(MVEBU_CCU_BASE(MVEBU_AP0) + \
+							0x3F0)
+#define GSPMU_CPU_CONTROL			(0x1 << 0)
+
+#define CCU_HTC_CR				(MVEBU_CCU_BASE(MVEBU_AP0) + \
+							0x200)
+#define CCU_SET_POC_OFFSET			5
+
+#define CCU_RGF(win)				(MVEBU_CCU_BASE(MVEBU_AP0) + \
+							0x90 + 4 * (win))
+
+#define DSS_CR0					(MVEBU_RFU_BASE + 0x100)
+#define DVM_48BIT_VA_ENABLE			(1 << 21)
+
+/* Secure MoChi incoming access */
+#define SEC_MOCHI_IN_ACC_REG			(MVEBU_RFU_BASE + 0x4738)
+#define SEC_MOCHI_IN_ACC_IHB0_EN		(1)
+#define SEC_MOCHI_IN_ACC_IHB1_EN		(1 << 3)
+#define SEC_MOCHI_IN_ACC_IHB2_EN		(1 << 6)
+#define SEC_MOCHI_IN_ACC_PIDI_EN		(1 << 9)
+#define SEC_IN_ACCESS_ENA_ALL_MASTERS		(SEC_MOCHI_IN_ACC_IHB0_EN | \
+						 SEC_MOCHI_IN_ACC_IHB1_EN | \
+						 SEC_MOCHI_IN_ACC_IHB2_EN | \
+						 SEC_MOCHI_IN_ACC_PIDI_EN)
+
+/* SYSRST_OUTn Config definitions */
+#define MVEBU_SYSRST_OUT_CONFIG_REG		(MVEBU_MISC_SOC_BASE + 0x4)
+#define WD_MASK_SYS_RST_OUT			(1 << 2)
+
+/* Generic Timer System Controller */
+#define MVEBU_MSS_GTCR_REG			(MVEBU_REGS_BASE + 0x581000)
+#define MVEBU_MSS_GTCR_ENABLE_BIT		0x1
+
+/*
+ * AXI Configuration.
+ */
+
+/* Used for Units of AP-806 (e.g. SDIO and etc) */
+#define MVEBU_AXI_ATTR_BASE			(MVEBU_REGS_BASE + 0x6F4580)
+#define MVEBU_AXI_ATTR_REG(index)		(MVEBU_AXI_ATTR_BASE + \
+							0x4 * index)
+
+enum axi_attr {
+	AXI_SDIO_ATTR = 0,
+	AXI_DFX_ATTR,
+	AXI_MAX_ATTR,
+};
+
+static void apn_sec_masters_access_en(uint32_t enable)
+{
+	uint32_t reg;
+
+	/* Open/Close incoming access for all masters.
+	 * The access is disabled in trusted boot mode
+	 * Could only be done in EL3
+	 */
+	reg = mmio_read_32(SEC_MOCHI_IN_ACC_REG);
+	if (enable)
+		mmio_write_32(SEC_MOCHI_IN_ACC_REG, reg |
+			      SEC_IN_ACCESS_ENA_ALL_MASTERS);
+	else
+		mmio_write_32(SEC_MOCHI_IN_ACC_REG, reg &
+			      ~SEC_IN_ACCESS_ENA_ALL_MASTERS);
+}
+
+static void setup_smmu(void)
+{
+	uint32_t reg;
+
+	/* Set the SMMU page size to 64 KB */
+	reg = mmio_read_32(SMMU_sACR);
+	reg |= SMMU_sACR_PG_64K;
+	mmio_write_32(SMMU_sACR, reg);
+}
+
+static void apn806_errata_wa_init(void)
+{
+	/*
+	 * ERRATA ID: RES-3033912 - Internal Address Space Init state causes
+	 * a hang upon accesses to [0xf070_0000, 0xf07f_ffff]
+	 * Workaround: Boot Firmware (ATF) should configure CCU_RGF_WIN(4) to
+	 * split [0x6e_0000, 0xff_ffff] to values [0x6e_0000, 0x6f_ffff] and
+	 * [0x80_0000, 0xff_ffff] that cause accesses to the
+	 * segment of [0xf070_0000, 0xf07f_ffff] to act as RAZWI.
+	 */
+	mmio_write_32(CCU_RGF(4), 0x37f9b809);
+	mmio_write_32(CCU_RGF(5), 0x7ffa0009);
+}
+
+static void init_aurora2(void)
+{
+	uint32_t reg;
+
+	/* Enable GSPMU control by CPU */
+	reg = mmio_read_32(CCU_GSPMU_CR);
+	reg |= GSPMU_CPU_CONTROL;
+	mmio_write_32(CCU_GSPMU_CR, reg);
+
+#if LLC_ENABLE
+	/* Enable LLC for AP806 in exclusive mode */
+	llc_enable(0, 1);
+
+	/* Set point of coherency to DDR.
+	 * This is required by units which have
+	 * SW cache coherency
+	 */
+	reg = mmio_read_32(CCU_HTC_CR);
+	reg |= (0x1 << CCU_SET_POC_OFFSET);
+	mmio_write_32(CCU_HTC_CR, reg);
+#endif /* LLC_ENABLE */
+
+	apn806_errata_wa_init();
+}
+
+
+/* MCIx indirect access register are based by default at 0xf4000000/0xf6000000
+ * to avoid conflict of internal registers of units connected via MCIx, which
+ * can be based on the same address (i.e CP1 base is also 0xf4000000),
+ * the following routines remaps the MCIx indirect bases to another domain
+ */
+static void mci_remap_indirect_access_base(void)
+{
+	uint32_t mci;
+
+	for (mci = 0; mci < MCI_MAX_UNIT_ID; mci++)
+		mmio_write_32(MCIX4_REG_START_ADDRESS_REG(mci),
+			      MVEBU_MCI_REG_BASE_REMAP(mci) >>
+			      MCI_REMAP_OFF_SHIFT);
+}
+
+static void apn806_axi_attr_init(void)
+{
+	uint32_t index, data;
+
+	/* Initialize AXI attributes for APN806 */
+
+	/* Go over the AXI attributes and set Ax-Cache and Ax-Domain */
+	for (index = 0; index < AXI_MAX_ATTR; index++) {
+		switch (index) {
+		/* DFX works with no coherent only -
+		 * there's no option to configure the Ax-Cache and Ax-Domain
+		 */
+		case AXI_DFX_ATTR:
+			continue;
+		default:
+			/* Set Ax-Cache as cacheable, no allocate, modifiable,
+			 * bufferable
+			 * The values are different because Read & Write
+			 * definition is different in Ax-Cache
+			 */
+			data = mmio_read_32(MVEBU_AXI_ATTR_REG(index));
+			data &= ~MVEBU_AXI_ATTR_ARCACHE_MASK;
+			data |= (CACHE_ATTR_WRITE_ALLOC |
+				 CACHE_ATTR_CACHEABLE   |
+				 CACHE_ATTR_BUFFERABLE) <<
+				 MVEBU_AXI_ATTR_ARCACHE_OFFSET;
+			data &= ~MVEBU_AXI_ATTR_AWCACHE_MASK;
+			data |= (CACHE_ATTR_READ_ALLOC |
+				 CACHE_ATTR_CACHEABLE  |
+				 CACHE_ATTR_BUFFERABLE) <<
+				 MVEBU_AXI_ATTR_AWCACHE_OFFSET;
+			/* Set Ax-Domain as Outer domain */
+			data &= ~MVEBU_AXI_ATTR_ARDOMAIN_MASK;
+			data |= DOMAIN_OUTER_SHAREABLE <<
+				MVEBU_AXI_ATTR_ARDOMAIN_OFFSET;
+			data &= ~MVEBU_AXI_ATTR_AWDOMAIN_MASK;
+			data |= DOMAIN_OUTER_SHAREABLE <<
+				MVEBU_AXI_ATTR_AWDOMAIN_OFFSET;
+			mmio_write_32(MVEBU_AXI_ATTR_REG(index), data);
+		}
+	}
+}
+
+static void dss_setup(void)
+{
+	/* Enable 48-bit VA */
+	mmio_setbits_32(DSS_CR0, DVM_48BIT_VA_ENABLE);
+}
+
+void misc_soc_configurations(void)
+{
+	uint32_t reg;
+
+	/* Un-mask Watchdog reset from influencing the SYSRST_OUTn.
+	 * Otherwise, upon WD timeout, the WD reset signal won't trigger reset
+	 */
+	reg = mmio_read_32(MVEBU_SYSRST_OUT_CONFIG_REG);
+	reg &= ~(WD_MASK_SYS_RST_OUT);
+	mmio_write_32(MVEBU_SYSRST_OUT_CONFIG_REG, reg);
+}
+
+void ap_init(void)
+{
+	/* Setup Aurora2. */
+	init_aurora2();
+
+	/* configure MCI mapping */
+	mci_remap_indirect_access_base();
+
+	/* configure IO_WIN windows */
+	init_io_win(MVEBU_AP0);
+
+	/* configure CCU windows */
+	init_ccu(MVEBU_AP0);
+
+	/* configure DSS */
+	dss_setup();
+
+	/* configure the SMMU */
+	setup_smmu();
+
+	/* Open APN incoming access for all masters */
+	apn_sec_masters_access_en(1);
+
+	/* configure axi for APN*/
+	apn806_axi_attr_init();
+
+	/* misc configuration of the SoC */
+	misc_soc_configurations();
+}
+
+void ap_ble_init(void)
+{
+}
+
+int ap_get_count(void)
+{
+	return 1;
+}
+
diff --git a/drivers/marvell/mochi/cp110_setup.c b/drivers/marvell/mochi/cp110_setup.c
new file mode 100644
index 00000000..c4cb307f
--- /dev/null
+++ b/drivers/marvell/mochi/cp110_setup.c
@@ -0,0 +1,429 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* CP110 Marvell SoC driver */
+
+#include <amb_adec.h>
+#include <cp110_setup.h>
+#include <debug.h>
+#include <delay_timer.h>
+#include <iob.h>
+#include <plat_marvell.h>
+
+/*
+ * AXI Configuration.
+ */
+
+ /* Used for Units of CP-110 (e.g. USB device, USB Host, and etc) */
+#define MVEBU_AXI_ATTR_OFFSET			(0x441300)
+#define MVEBU_AXI_ATTR_REG(index)		(MVEBU_AXI_ATTR_OFFSET + \
+							0x4 * index)
+
+/* AXI Protection bits */
+#define MVEBU_AXI_PROT_OFFSET				(0x441200)
+
+/* AXI Protection regs */
+#define MVEBU_AXI_PROT_REG(index)		((index <= 4) ? \
+						(MVEBU_AXI_PROT_OFFSET + \
+							0x4 * index) : \
+						(MVEBU_AXI_PROT_OFFSET + 0x18))
+#define MVEBU_AXI_PROT_REGS_NUM			(6)
+
+#define MVEBU_SOC_CFGS_OFFSET			(0x441900)
+#define MVEBU_SOC_CFG_REG(index)		(MVEBU_SOC_CFGS_OFFSET + \
+							0x4 * index)
+#define MVEBU_SOC_CFG_REG_NUM			(0)
+#define MVEBU_SOC_CFG_GLOG_SECURE_EN_MASK	(0xE)
+
+/* SATA3 MBUS to AXI regs */
+#define MVEBU_BRIDGE_WIN_DIS_REG		(MVEBU_SOC_CFGS_OFFSET + 0x10)
+#define MVEBU_BRIDGE_WIN_DIS_OFF		(0x0)
+
+/* SATA3 MBUS to AXI regs */
+#define MVEBU_SATA_M2A_AXI_PORT_CTRL_REG	(0x54ff04)
+
+/* AXI to MBUS bridge registers */
+#define MVEBU_AMB_IP_OFFSET			(0x13ff00)
+#define MVEBU_AMB_IP_BRIDGE_WIN_REG(win)	(MVEBU_AMB_IP_OFFSET + \
+							(win * 0x8))
+#define MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET	0
+#define MVEBU_AMB_IP_BRIDGE_WIN_EN_MASK		\
+				(0x1 << MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET)
+#define MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET	16
+#define MVEBU_AMB_IP_BRIDGE_WIN_SIZE_MASK	\
+				(0xffff << MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET)
+
+#define MVEBU_SAMPLE_AT_RESET_REG	(0x440600)
+#define SAR_PCIE1_CLK_CFG_OFFSET	31
+#define SAR_PCIE1_CLK_CFG_MASK		(0x1 << SAR_PCIE1_CLK_CFG_OFFSET)
+#define SAR_PCIE0_CLK_CFG_OFFSET	30
+#define SAR_PCIE0_CLK_CFG_MASK		(0x1 << SAR_PCIE0_CLK_CFG_OFFSET)
+#define SAR_I2C_INIT_EN_OFFSET		24
+#define SAR_I2C_INIT_EN_MASK		(1 << SAR_I2C_INIT_EN_OFFSET)
+
+/*******************************************************************************
+ * PCIE clock buffer control
+ ******************************************************************************/
+#define MVEBU_PCIE_REF_CLK_BUF_CTRL			(0x4404F0)
+#define PCIE1_REFCLK_BUFF_SOURCE			0x800
+#define PCIE0_REFCLK_BUFF_SOURCE			0x400
+
+/*******************************************************************************
+ * MSS Device Push Set Register
+ ******************************************************************************/
+#define MVEBU_CP_MSS_DPSHSR_REG				(0x280040)
+#define MSS_DPSHSR_REG_PCIE_CLK_SEL			0x8
+
+/*******************************************************************************
+ * RTC Configuration
+ ******************************************************************************/
+#define MVEBU_RTC_BASE					(0x284000)
+#define MVEBU_RTC_STATUS_REG				(MVEBU_RTC_BASE + 0x0)
+#define MVEBU_RTC_STATUS_ALARM1_MASK			0x1
+#define MVEBU_RTC_STATUS_ALARM2_MASK			0x2
+#define MVEBU_RTC_IRQ_1_CONFIG_REG			(MVEBU_RTC_BASE + 0x4)
+#define MVEBU_RTC_IRQ_2_CONFIG_REG			(MVEBU_RTC_BASE + 0x8)
+#define MVEBU_RTC_TIME_REG				(MVEBU_RTC_BASE + 0xC)
+#define MVEBU_RTC_ALARM_1_REG				(MVEBU_RTC_BASE + 0x10)
+#define MVEBU_RTC_ALARM_2_REG				(MVEBU_RTC_BASE + 0x14)
+#define MVEBU_RTC_CCR_REG				(MVEBU_RTC_BASE + 0x18)
+#define MVEBU_RTC_NOMINAL_TIMING			0x2000
+#define MVEBU_RTC_NOMINAL_TIMING_MASK			0x7FFF
+#define MVEBU_RTC_TEST_CONFIG_REG			(MVEBU_RTC_BASE + 0x1C)
+#define MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG		(MVEBU_RTC_BASE + 0x80)
+#define MVEBU_RTC_WRCLK_PERIOD_MASK			0xFFFF
+#define MVEBU_RTC_WRCLK_PERIOD_DEFAULT			0x3FF
+#define MVEBU_RTC_WRCLK_SETUP_OFFS			16
+#define MVEBU_RTC_WRCLK_SETUP_MASK			0xFFFF0000
+#define MVEBU_RTC_WRCLK_SETUP_DEFAULT			0x29
+#define MVEBU_RTC_BRIDGE_TIMING_CTRL1_REG		(MVEBU_RTC_BASE + 0x84)
+#define MVEBU_RTC_READ_OUTPUT_DELAY_MASK		0xFFFF
+#define MVEBU_RTC_READ_OUTPUT_DELAY_DEFAULT		0x1F
+
+enum axi_attr {
+	AXI_ADUNIT_ATTR = 0,
+	AXI_COMUNIT_ATTR,
+	AXI_EIP197_ATTR,
+	AXI_USB3D_ATTR,
+	AXI_USB3H0_ATTR,
+	AXI_USB3H1_ATTR,
+	AXI_SATA0_ATTR,
+	AXI_SATA1_ATTR,
+	AXI_DAP_ATTR,
+	AXI_DFX_ATTR,
+	AXI_DBG_TRC_ATTR = 12,
+	AXI_SDIO_ATTR,
+	AXI_MSS_ATTR,
+	AXI_MAX_ATTR,
+};
+
+/* Most stream IDS are configured centrally in the CP-110 RFU
+ * but some are configured inside the unit registers
+ */
+#define RFU_STREAM_ID_BASE	(0x450000)
+#define USB3H_0_STREAM_ID_REG	(RFU_STREAM_ID_BASE + 0xC)
+#define USB3H_1_STREAM_ID_REG	(RFU_STREAM_ID_BASE + 0x10)
+#define SATA_0_STREAM_ID_REG	(RFU_STREAM_ID_BASE + 0x14)
+#define SATA_1_STREAM_ID_REG	(RFU_STREAM_ID_BASE + 0x18)
+
+#define CP_DMA_0_STREAM_ID_REG  (0x6B0010)
+#define CP_DMA_1_STREAM_ID_REG  (0x6D0010)
+
+/* We allocate IDs 128-255 for PCIe */
+#define MAX_STREAM_ID		(0x80)
+
+uintptr_t stream_id_reg[] = {
+	USB3H_0_STREAM_ID_REG,
+	USB3H_1_STREAM_ID_REG,
+	CP_DMA_0_STREAM_ID_REG,
+	CP_DMA_1_STREAM_ID_REG,
+	SATA_0_STREAM_ID_REG,
+	SATA_1_STREAM_ID_REG,
+	0
+};
+
+static void cp110_errata_wa_init(uintptr_t base)
+{
+	uint32_t data;
+
+	/* ERRATA GL-4076863:
+	 * Reset value for global_secure_enable inputs must be changed
+	 * from '1' to '0'.
+	 * When asserted, only "secured" transactions can enter IHB
+	 * configuration space.
+	 * However, blocking AXI transactions is performed by IOB.
+	 * Performing it also at IHB/HB complicates programming model.
+	 *
+	 * Enable non-secure access in SOC configuration register
+	 */
+	data = mmio_read_32(base + MVEBU_SOC_CFG_REG(MVEBU_SOC_CFG_REG_NUM));
+	data &= ~MVEBU_SOC_CFG_GLOG_SECURE_EN_MASK;
+	mmio_write_32(base + MVEBU_SOC_CFG_REG(MVEBU_SOC_CFG_REG_NUM), data);
+}
+
+static void cp110_pcie_clk_cfg(uintptr_t base)
+{
+	uint32_t pcie0_clk, pcie1_clk, reg;
+
+	/*
+	 * Determine the pcie0/1 clock direction (input/output) from the
+	 * sample at reset.
+	 */
+	reg = mmio_read_32(base + MVEBU_SAMPLE_AT_RESET_REG);
+	pcie0_clk = (reg & SAR_PCIE0_CLK_CFG_MASK) >> SAR_PCIE0_CLK_CFG_OFFSET;
+	pcie1_clk = (reg & SAR_PCIE1_CLK_CFG_MASK) >> SAR_PCIE1_CLK_CFG_OFFSET;
+
+	/* CP110 revision A2 */
+	if (cp110_rev_id_get(base) == MVEBU_CP110_REF_ID_A2) {
+		/*
+		 * PCIe Reference Clock Buffer Control register must be
+		 * set according to the clock direction (input/output)
+		 */
+		reg = mmio_read_32(base + MVEBU_PCIE_REF_CLK_BUF_CTRL);
+		reg &= ~(PCIE0_REFCLK_BUFF_SOURCE | PCIE1_REFCLK_BUFF_SOURCE);
+		if (!pcie0_clk)
+			reg |= PCIE0_REFCLK_BUFF_SOURCE;
+		if (!pcie1_clk)
+			reg |= PCIE1_REFCLK_BUFF_SOURCE;
+
+		mmio_write_32(base + MVEBU_PCIE_REF_CLK_BUF_CTRL, reg);
+	}
+
+	/* CP110 revision A1 */
+	if (cp110_rev_id_get(base) == MVEBU_CP110_REF_ID_A1) {
+		if (!pcie0_clk || !pcie1_clk) {
+			/*
+			 * if one of the pcie clocks is set to input,
+			 * we need to set mss_push[131] field, otherwise,
+			 * the pcie clock might not work.
+			 */
+			reg = mmio_read_32(base + MVEBU_CP_MSS_DPSHSR_REG);
+			reg |= MSS_DPSHSR_REG_PCIE_CLK_SEL;
+			mmio_write_32(base + MVEBU_CP_MSS_DPSHSR_REG, reg);
+		}
+	}
+}
+
+/* Set a unique stream id for all DMA capable devices */
+static void cp110_stream_id_init(uintptr_t base, uint32_t stream_id)
+{
+	int i = 0;
+
+	while (stream_id_reg[i]) {
+		if (i > MAX_STREAM_ID_PER_CP) {
+			NOTICE("Only first %d (maximum) Stream IDs allocated\n",
+			       MAX_STREAM_ID_PER_CP);
+			return;
+		}
+
+		if ((stream_id_reg[i] == CP_DMA_0_STREAM_ID_REG) ||
+		    (stream_id_reg[i] == CP_DMA_1_STREAM_ID_REG))
+			mmio_write_32(base + stream_id_reg[i],
+				      stream_id << 16 |  stream_id);
+		else
+			mmio_write_32(base + stream_id_reg[i], stream_id);
+
+		/* SATA port 0/1 are in the same SATA unit, and they should use
+		 * the same STREAM ID number
+		 */
+		if (stream_id_reg[i] != SATA_0_STREAM_ID_REG)
+			stream_id++;
+
+		i++;
+	}
+}
+
+static void cp110_axi_attr_init(uintptr_t base)
+{
+	uint32_t index, data;
+
+	/* Initialize AXI attributes for Armada-7K/8K SoC */
+
+	/* Go over the AXI attributes and set Ax-Cache and Ax-Domain */
+	for (index = 0; index < AXI_MAX_ATTR; index++) {
+		switch (index) {
+		/* DFX and MSS unit works with no coherent only -
+		 * there's no option to configure the Ax-Cache and Ax-Domain
+		 */
+		case AXI_DFX_ATTR:
+		case AXI_MSS_ATTR:
+			continue;
+		default:
+			/* Set Ax-Cache as cacheable, no allocate, modifiable,
+			 * bufferable
+			 * The values are different because Read & Write
+			 * definition is different in Ax-Cache
+			 */
+			data = mmio_read_32(base + MVEBU_AXI_ATTR_REG(index));
+			data &= ~MVEBU_AXI_ATTR_ARCACHE_MASK;
+			data |= (CACHE_ATTR_WRITE_ALLOC |
+				 CACHE_ATTR_CACHEABLE   |
+				 CACHE_ATTR_BUFFERABLE) <<
+				 MVEBU_AXI_ATTR_ARCACHE_OFFSET;
+			data &= ~MVEBU_AXI_ATTR_AWCACHE_MASK;
+			data |= (CACHE_ATTR_READ_ALLOC |
+				 CACHE_ATTR_CACHEABLE  |
+				 CACHE_ATTR_BUFFERABLE) <<
+				 MVEBU_AXI_ATTR_AWCACHE_OFFSET;
+			/* Set Ax-Domain as Outer domain */
+			data &= ~MVEBU_AXI_ATTR_ARDOMAIN_MASK;
+			data |= DOMAIN_OUTER_SHAREABLE <<
+				MVEBU_AXI_ATTR_ARDOMAIN_OFFSET;
+			data &= ~MVEBU_AXI_ATTR_AWDOMAIN_MASK;
+			data |= DOMAIN_OUTER_SHAREABLE <<
+				MVEBU_AXI_ATTR_AWDOMAIN_OFFSET;
+			mmio_write_32(base + MVEBU_AXI_ATTR_REG(index), data);
+		}
+	}
+
+	/* SATA IOCC supported, cache attributes
+	 * for SATA MBUS to AXI configuration.
+	 */
+	data = mmio_read_32(base + MVEBU_SATA_M2A_AXI_PORT_CTRL_REG);
+	data &= ~MVEBU_SATA_M2A_AXI_AWCACHE_MASK;
+	data |= (CACHE_ATTR_WRITE_ALLOC |
+		 CACHE_ATTR_CACHEABLE   |
+		 CACHE_ATTR_BUFFERABLE) <<
+		 MVEBU_SATA_M2A_AXI_AWCACHE_OFFSET;
+	data &= ~MVEBU_SATA_M2A_AXI_ARCACHE_MASK;
+	data |= (CACHE_ATTR_READ_ALLOC |
+		 CACHE_ATTR_CACHEABLE  |
+		 CACHE_ATTR_BUFFERABLE) <<
+		 MVEBU_SATA_M2A_AXI_ARCACHE_OFFSET;
+	mmio_write_32(base + MVEBU_SATA_M2A_AXI_PORT_CTRL_REG, data);
+
+	/* Set all IO's AXI attribute to non-secure access. */
+	for (index = 0; index < MVEBU_AXI_PROT_REGS_NUM; index++)
+		mmio_write_32(base + MVEBU_AXI_PROT_REG(index),
+			      DOMAIN_SYSTEM_SHAREABLE);
+}
+
+static void amb_bridge_init(uintptr_t base)
+{
+	uint32_t reg;
+
+	/* Open AMB bridge Window to Access COMPHY/MDIO registers */
+	reg = mmio_read_32(base + MVEBU_AMB_IP_BRIDGE_WIN_REG(0));
+	reg &= ~(MVEBU_AMB_IP_BRIDGE_WIN_SIZE_MASK |
+		 MVEBU_AMB_IP_BRIDGE_WIN_EN_MASK);
+	reg |= (0x7ff << MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET) |
+	       (0x1 << MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET);
+	mmio_write_32(base + MVEBU_AMB_IP_BRIDGE_WIN_REG(0), reg);
+}
+
+static void cp110_rtc_init(uintptr_t base)
+{
+	/* Update MBus timing parameters before accessing RTC registers */
+	mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG,
+			   MVEBU_RTC_WRCLK_PERIOD_MASK,
+			   MVEBU_RTC_WRCLK_PERIOD_DEFAULT);
+
+	mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG,
+			   MVEBU_RTC_WRCLK_SETUP_MASK,
+			   MVEBU_RTC_WRCLK_SETUP_DEFAULT <<
+			   MVEBU_RTC_WRCLK_SETUP_OFFS);
+
+	mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL1_REG,
+			   MVEBU_RTC_READ_OUTPUT_DELAY_MASK,
+			   MVEBU_RTC_READ_OUTPUT_DELAY_DEFAULT);
+
+	/*
+	 * Issue reset to the RTC if Clock Correction register
+	 * contents did not sustain the reboot/power-on.
+	 */
+	if ((mmio_read_32(base + MVEBU_RTC_CCR_REG) &
+	    MVEBU_RTC_NOMINAL_TIMING_MASK) != MVEBU_RTC_NOMINAL_TIMING) {
+		/* Reset Test register */
+		mmio_write_32(base + MVEBU_RTC_TEST_CONFIG_REG, 0);
+		mdelay(500);
+
+		/* Reset Time register */
+		mmio_write_32(base + MVEBU_RTC_TIME_REG, 0);
+		udelay(62);
+
+		/* Reset Status register */
+		mmio_write_32(base + MVEBU_RTC_STATUS_REG,
+			      (MVEBU_RTC_STATUS_ALARM1_MASK |
+			      MVEBU_RTC_STATUS_ALARM2_MASK));
+		udelay(62);
+
+		/* Turn off Int1 and Int2 sources & clear the Alarm count */
+		mmio_write_32(base + MVEBU_RTC_IRQ_1_CONFIG_REG, 0);
+		mmio_write_32(base + MVEBU_RTC_IRQ_2_CONFIG_REG, 0);
+		mmio_write_32(base + MVEBU_RTC_ALARM_1_REG, 0);
+		mmio_write_32(base + MVEBU_RTC_ALARM_2_REG, 0);
+
+		/* Setup nominal register access timing */
+		mmio_write_32(base + MVEBU_RTC_CCR_REG,
+			      MVEBU_RTC_NOMINAL_TIMING);
+
+		/* Reset Time register */
+		mmio_write_32(base + MVEBU_RTC_TIME_REG, 0);
+		udelay(10);
+
+		/* Reset Status register */
+		mmio_write_32(base + MVEBU_RTC_STATUS_REG,
+			      (MVEBU_RTC_STATUS_ALARM1_MASK |
+			      MVEBU_RTC_STATUS_ALARM2_MASK));
+		udelay(50);
+	}
+}
+
+static void cp110_amb_adec_init(uintptr_t base)
+{
+	/* enable AXI-MBUS by clearing "Bridge Windows Disable" */
+	mmio_clrbits_32(base + MVEBU_BRIDGE_WIN_DIS_REG,
+			(1 << MVEBU_BRIDGE_WIN_DIS_OFF));
+
+	/* configure AXI-MBUS windows for CP */
+	init_amb_adec(base);
+}
+
+void cp110_init(uintptr_t cp110_base, uint32_t stream_id)
+{
+	INFO("%s: Initialize CPx - base = %lx\n", __func__, cp110_base);
+
+	/* configure IOB windows for CP0*/
+	init_iob(cp110_base);
+
+	/* configure AXI-MBUS windows for CP0*/
+	cp110_amb_adec_init(cp110_base);
+
+	/* configure axi for CP0*/
+	cp110_axi_attr_init(cp110_base);
+
+	/* Execute SW WA for erratas */
+	cp110_errata_wa_init(cp110_base);
+
+	/* Confiure pcie clock according to clock direction */
+	cp110_pcie_clk_cfg(cp110_base);
+
+	/* configure stream id for CP0 */
+	cp110_stream_id_init(cp110_base, stream_id);
+
+	/* Open AMB bridge for comphy for CP0 & CP1*/
+	amb_bridge_init(cp110_base);
+
+	/* Reset RTC if needed */
+	cp110_rtc_init(cp110_base);
+}
+
+/* Do the minimal setup required to configure the CP in BLE */
+void cp110_ble_init(uintptr_t cp110_base)
+{
+#if PCI_EP_SUPPORT
+	INFO("%s: Initialize CPx - base = %lx\n", __func__, cp110_base);
+
+	amb_bridge_init(cp110_base);
+
+	/* Configure PCIe clock */
+	cp110_pcie_clk_cfg(cp110_base);
+
+	/* Configure PCIe endpoint */
+	ble_plat_pcie_ep_setup();
+#endif
+}
diff --git a/drivers/marvell/thermal.c b/drivers/marvell/thermal.c
new file mode 100644
index 00000000..c7ceb929
--- /dev/null
+++ b/drivers/marvell/thermal.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Driver for thermal unit located in Marvell ARMADA 8K and compatible SoCs */
+
+#include <debug.h>
+#include <thermal.h>
+
+int marvell_thermal_init(struct tsen_config *tsen_cfg)
+{
+	if (tsen_cfg->tsen_ready == 1) {
+		INFO("thermal sensor is already initialized\n");
+		return 0;
+	}
+
+	if (tsen_cfg->ptr_tsen_probe == NULL) {
+		ERROR("initial thermal sensor configuration is missing\n");
+		return -1;
+	}
+
+	if (tsen_cfg->ptr_tsen_probe(tsen_cfg)) {
+		ERROR("thermal sensor initialization failed\n");
+		return -1;
+	}
+
+	VERBOSE("thermal sensor was initialized\n");
+
+	return 0;
+}
+
+int marvell_thermal_read(struct tsen_config *tsen_cfg, int *temp)
+{
+	if (temp == NULL) {
+		ERROR("NULL pointer for temperature read\n");
+		return -1;
+	}
+
+	if (tsen_cfg->ptr_tsen_read == NULL ||
+	    tsen_cfg->tsen_ready == 0) {
+		ERROR("thermal sensor was not initialized\n");
+		return -1;
+	}
+
+	if (tsen_cfg->ptr_tsen_read(tsen_cfg, temp)) {
+		ERROR("temperature read failed\n");
+		return -1;
+	}
+
+	return 0;
+}
diff --git a/include/drivers/marvell/a8k_i2c.h b/include/drivers/marvell/a8k_i2c.h
new file mode 100644
index 00000000..8a9abe8d
--- /dev/null
+++ b/include/drivers/marvell/a8k_i2c.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* This driver provides I2C support for Marvell A8K and compatible SoCs */
+
+#ifndef _A8K_I2C_H_
+#define _A8K_I2C_H_
+
+#include <stdint.h>
+
+/*
+ * Initialization, must be called once on start up, may be called
+ * repeatedly to change the speed and slave addresses.
+ */
+void i2c_init(void *i2c_base);
+
+/*
+ * Read/Write interface:
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(uint8_t chip,
+	     unsigned int addr, int alen, uint8_t *buffer, int len);
+
+int i2c_write(uint8_t chip,
+	      unsigned int addr, int alen, uint8_t *buffer, int len);
+#endif
diff --git a/include/drivers/marvell/addr_map.h b/include/drivers/marvell/addr_map.h
new file mode 100644
index 00000000..6b957a16
--- /dev/null
+++ b/include/drivers/marvell/addr_map.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Address map types for Marvell address translation unit drivers */
+
+#ifndef _ADDR_MAP_H_
+#define _ADDR_MAP_H_
+
+#include <stdint.h>
+
+struct addr_map_win {
+	uint64_t base_addr;
+	uint64_t win_size;
+	uint32_t target_id;
+};
+
+#endif /* _ADDR_MAP_H_ */
diff --git a/include/drivers/marvell/amb_adec.h b/include/drivers/marvell/amb_adec.h
new file mode 100644
index 00000000..087864a4
--- /dev/null
+++ b/include/drivers/marvell/amb_adec.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* AXI to M-Bridge decoding unit driver for Marvell Armada 8K and 8K+ SoCs */
+
+#ifndef _AMB_ADEC_H_
+#define _AMB_ADEC_H_
+
+#include <stdint.h>
+
+enum amb_attribute_ids {
+	AMB_SPI0_CS0_ID = 0x1E,
+	AMB_SPI0_CS1_ID = 0x5E,
+	AMB_SPI0_CS2_ID = 0x9E,
+	AMB_SPI0_CS3_ID = 0xDE,
+	AMB_SPI1_CS0_ID = 0x1A,
+	AMB_SPI1_CS1_ID = 0x5A,
+	AMB_SPI1_CS2_ID = 0x9A,
+	AMB_SPI1_CS3_ID = 0xDA,
+	AMB_DEV_CS0_ID = 0x3E,
+	AMB_DEV_CS1_ID = 0x3D,
+	AMB_DEV_CS2_ID = 0x3B,
+	AMB_DEV_CS3_ID = 0x37,
+	AMB_BOOT_CS_ID = 0x2f,
+	AMB_BOOT_ROM_ID = 0x1D,
+};
+
+#define AMB_MAX_WIN_ID		7
+
+int init_amb_adec(uintptr_t base);
+
+#endif /* _AMB_ADEC_H_ */
diff --git a/include/drivers/marvell/aro.h b/include/drivers/marvell/aro.h
new file mode 100644
index 00000000..3627a201
--- /dev/null
+++ b/include/drivers/marvell/aro.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2017 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+#ifndef _ARO_H_
+#define _ARO_H_
+
+enum hws_freq {
+	CPU_FREQ_2000,
+	CPU_FREQ_1800,
+	CPU_FREQ_1600,
+	CPU_FREQ_1400,
+	CPU_FREQ_1300,
+	CPU_FREQ_1200,
+	CPU_FREQ_1000,
+	CPU_FREQ_600,
+	CPU_FREQ_800,
+	DDR_FREQ_LAST,
+	DDR_FREQ_SAR
+};
+
+enum cpu_clock_freq_mode {
+	CPU_2000_DDR_1200_RCLK_1200 = 0x0,
+	CPU_2000_DDR_1050_RCLK_1050 = 0x1,
+	CPU_1600_DDR_800_RCLK_800   = 0x4,
+	CPU_1800_DDR_1200_RCLK_1200 = 0x6,
+	CPU_1800_DDR_1050_RCLK_1050 = 0x7,
+	CPU_1600_DDR_900_RCLK_900   = 0x0B,
+	CPU_1600_DDR_1050_RCLK_1050 = 0x0D,
+	CPU_1600_DDR_900_RCLK_900_2 = 0x0E,
+	CPU_1000_DDR_650_RCLK_650   = 0x13,
+	CPU_1300_DDR_800_RCLK_800   = 0x14,
+	CPU_1300_DDR_650_RCLK_650   = 0x17,
+	CPU_1200_DDR_800_RCLK_800   = 0x19,
+	CPU_1400_DDR_800_RCLK_800   = 0x1a,
+	CPU_600_DDR_800_RCLK_800    = 0x1B,
+	CPU_800_DDR_800_RCLK_800    = 0x1C,
+	CPU_1000_DDR_800_RCLK_800   = 0x1D,
+	CPU_DDR_RCLK_INVALID
+};
+
+int init_aro(void);
+
+#endif /* _ARO_H_ */
diff --git a/include/drivers/marvell/cache_llc.h b/include/drivers/marvell/cache_llc.h
new file mode 100644
index 00000000..9e417939
--- /dev/null
+++ b/include/drivers/marvell/cache_llc.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* LLC driver is the Last Level Cache (L3C) driver
+ * for Marvell SoCs in AP806, AP807, and AP810
+ */
+
+#ifndef _CACHE_LLC_H_
+#define _CACHE_LLC_H_
+
+#define LLC_CTRL(ap)			(MVEBU_LLC_BASE(ap) + 0x100)
+#define LLC_SYNC(ap)			(MVEBU_LLC_BASE(ap) + 0x700)
+#define L2X0_INV_WAY(ap)		(MVEBU_LLC_BASE(ap) + 0x77C)
+#define L2X0_CLEAN_WAY(ap)		(MVEBU_LLC_BASE(ap) + 0x7BC)
+#define L2X0_CLEAN_INV_WAY(ap)		(MVEBU_LLC_BASE(ap) + 0x7FC)
+#define LLC_TC0_LOCK(ap)		(MVEBU_LLC_BASE(ap) + 0x920)
+
+#define MASTER_LLC_CTRL			LLC_CTRL(MVEBU_AP0)
+#define MASTER_L2X0_INV_WAY		L2X0_INV_WAY(MVEBU_AP0)
+#define MASTER_LLC_TC0_LOCK		LLC_TC0_LOCK(MVEBU_AP0)
+
+#define LLC_CTRL_EN			1
+#define LLC_EXCLUSIVE_EN		0x100
+#define LLC_WAY_MASK			0xFFFFFFFF
+
+#ifndef __ASSEMBLY__
+void llc_cache_sync(int ap_index);
+void llc_flush_all(int ap_index);
+void llc_clean_all(int ap_index);
+void llc_inv_all(int ap_index);
+void llc_disable(int ap_index);
+void llc_enable(int ap_index, int excl_mode);
+int llc_is_exclusive(int ap_index);
+void llc_runtime_enable(int ap_index);
+#endif
+
+#endif /* _CACHE_LLC_H_ */
+
diff --git a/include/drivers/marvell/ccu.h b/include/drivers/marvell/ccu.h
new file mode 100644
index 00000000..ff30a76a
--- /dev/null
+++ b/include/drivers/marvell/ccu.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* CCU unit device driver for Marvell AP807, AP807 and AP810 SoCs */
+
+#ifndef _CCU_H_
+#define _CCU_H_
+
+#ifndef __ASSEMBLY__
+#include <addr_map.h>
+#endif
+
+/* CCU registers definitions */
+#define CCU_WIN_CR_OFFSET(ap, win)		(MVEBU_CCU_BASE(ap) + 0x0 + \
+						(0x10 * win))
+#define CCU_TARGET_ID_OFFSET			(8)
+#define CCU_TARGET_ID_MASK			(0x7F)
+
+#define CCU_WIN_SCR_OFFSET(ap, win)		(MVEBU_CCU_BASE(ap) + 0x4 + \
+						(0x10 * win))
+#define CCU_WIN_ENA_WRITE_SECURE		(0x1)
+#define CCU_WIN_ENA_READ_SECURE			(0x2)
+
+#define CCU_WIN_ALR_OFFSET(ap, win)		(MVEBU_CCU_BASE(ap) + 0x8 + \
+						(0x10 * win))
+#define CCU_WIN_AHR_OFFSET(ap, win)		(MVEBU_CCU_BASE(ap) + 0xC + \
+						(0x10 * win))
+
+#define CCU_WIN_GCR_OFFSET(ap)			(MVEBU_CCU_BASE(ap) + 0xD0)
+#define CCU_GCR_TARGET_OFFSET			(8)
+#define CCU_GCR_TARGET_MASK			(0xFF)
+
+#define CCU_SRAM_WIN_CR				CCU_WIN_CR_OFFSET(MVEBU_AP0, 1)
+
+#ifndef __ASSEMBLY__
+int init_ccu(int);
+void ccu_win_check(struct addr_map_win *win);
+void ccu_enable_win(int ap_index, struct addr_map_win *win, uint32_t win_id);
+void ccu_temp_win_insert(int ap_index, struct addr_map_win *win, int size);
+void ccu_temp_win_remove(int ap_index, struct addr_map_win *win, int size);
+void ccu_dram_win_config(int ap_index, struct addr_map_win *win);
+void ccu_dram_target_set(int ap_index, uint32_t target);
+void ccu_save_win_all(int ap_id);
+void ccu_restore_win_all(int ap_id);
+#endif
+
+#endif /* _CCU_H_ */
diff --git a/include/drivers/marvell/gwin.h b/include/drivers/marvell/gwin.h
new file mode 100644
index 00000000..5dc9f244
--- /dev/null
+++ b/include/drivers/marvell/gwin.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* GWIN unit device driver for Marvell AP810 SoC */
+
+#ifndef _GWIN_H_
+#define _GWIN_H_
+
+#include <addr_map.h>
+
+int init_gwin(int ap_index);
+void gwin_temp_win_insert(int ap_index, struct addr_map_win *win, int size);
+void gwin_temp_win_remove(int ap_index, struct addr_map_win *win, int size);
+
+#endif /* _GWIN_H_ */
diff --git a/include/drivers/marvell/i2c.h b/include/drivers/marvell/i2c.h
new file mode 100644
index 00000000..bd143852
--- /dev/null
+++ b/include/drivers/marvell/i2c.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef _I2C_H_
+#define _I2C_H_
+
+
+void i2c_init(void);
+
+int i2c_read(uint8_t chip,
+	     unsigned int addr, int alen, uint8_t *buffer, int len);
+
+int i2c_write(uint8_t chip,
+	      unsigned int addr, int alen, uint8_t *buffer, int len);
+#endif
diff --git a/include/drivers/marvell/io_win.h b/include/drivers/marvell/io_win.h
new file mode 100644
index 00000000..4102a11a
--- /dev/null
+++ b/include/drivers/marvell/io_win.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* IO Window unit device driver for Marvell AP807, AP807 and AP810 SoCs */
+
+#ifndef _IO_WIN_H_
+#define _IO_WIN_H_
+
+#include <addr_map.h>
+
+int init_io_win(int ap_index);
+void iow_temp_win_insert(int ap_index, struct addr_map_win *win, int size);
+void iow_temp_win_remove(int ap_index, struct addr_map_win *win, int size);
+void iow_save_win_all(int ap_id);
+void iow_restore_win_all(int ap_id);
+
+#endif /* _IO_WIN_H_ */
diff --git a/include/drivers/marvell/iob.h b/include/drivers/marvell/iob.h
new file mode 100644
index 00000000..9848c0ab
--- /dev/null
+++ b/include/drivers/marvell/iob.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* IOW unit device driver for Marvell CP110 and CP115 SoCs */
+
+#ifndef _IOB_H_
+#define _IOB_H_
+
+#include <addr_map.h>
+
+enum target_ids_iob {
+	INTERNAL_TID	= 0x0,
+	MCI0_TID	= 0x1,
+	PEX1_TID	= 0x2,
+	PEX2_TID	= 0x3,
+	PEX0_TID	= 0x4,
+	NAND_TID	= 0x5,
+	RUNIT_TID	= 0x6,
+	MCI1_TID	= 0x7,
+	IOB_MAX_TID
+};
+
+int init_iob(uintptr_t base);
+void iob_cfg_space_update(int ap_idx, int cp_idx,
+			  uintptr_t base, uintptr_t new_base);
+
+#endif /* _IOB_H_ */
diff --git a/include/drivers/marvell/mci.h b/include/drivers/marvell/mci.h
new file mode 100644
index 00000000..789b3b96
--- /dev/null
+++ b/include/drivers/marvell/mci.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* MCI bus driver for Marvell ARMADA 8K and 8K+ SoCs */
+
+#ifndef _MCI_H_
+#define _MCI_H_
+
+int mci_initialize(int mci_index);
+void mci_turn_link_down(void);
+void mci_turn_link_on(void);
+int mci_get_link_status(void);
+
+#endif /* _MCI_H_ */
diff --git a/include/drivers/marvell/mochi/ap_setup.h b/include/drivers/marvell/mochi/ap_setup.h
new file mode 100644
index 00000000..41f2bac3
--- /dev/null
+++ b/include/drivers/marvell/mochi/ap_setup.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* AP8xx Marvell SoC driver */
+
+#ifndef __AP_SETUP_H__
+#define __AP_SETUP_H__
+
+void ap_init(void);
+void ap_ble_init(void);
+int ap_get_count(void);
+
+#endif /* __AP_SETUP_H__ */
diff --git a/include/drivers/marvell/mochi/cp110_setup.h b/include/drivers/marvell/mochi/cp110_setup.h
new file mode 100644
index 00000000..1c88980a
--- /dev/null
+++ b/include/drivers/marvell/mochi/cp110_setup.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* CP110 Marvell SoC driver */
+
+#ifndef __CP110_SETUP_H__
+#define __CP110_SETUP_H__
+
+#include <mmio.h>
+#include <mvebu_def.h>
+
+#define MVEBU_DEVICE_ID_REG		(MVEBU_CP_DFX_OFFSET + 0x40)
+#define MVEBU_DEVICE_ID_OFFSET		(0)
+#define MVEBU_DEVICE_ID_MASK		(0xffff << MVEBU_DEVICE_ID_OFFSET)
+#define MVEBU_DEVICE_REV_OFFSET		(16)
+#define MVEBU_DEVICE_REV_MASK		(0xf << MVEBU_DEVICE_REV_OFFSET)
+#define MVEBU_70X0_DEV_ID		(0x7040)
+#define MVEBU_70X0_CP115_DEV_ID		(0x7045)
+#define MVEBU_80X0_DEV_ID		(0x8040)
+#define MVEBU_80X0_CP115_DEV_ID		(0x8045)
+#define MVEBU_CP110_SA_DEV_ID		(0x110)
+#define MVEBU_CP110_REF_ID_A1		1
+#define MVEBU_CP110_REF_ID_A2		2
+#define MAX_STREAM_ID_PER_CP		(0x10)
+#define STREAM_ID_BASE			(0x40)
+
+static inline uint32_t cp110_device_id_get(uintptr_t base)
+{
+	/* Returns:
+	 * - MVEBU_70X0_DEV_ID for A70X0 family
+	 * - MVEBU_80X0_DEV_ID for A80X0 family
+	 * - MVEBU_CP110_SA_DEV_ID for CP that connected stand alone
+	 */
+	return (mmio_read_32(base + MVEBU_DEVICE_ID_REG) >>
+		MVEBU_DEVICE_ID_OFFSET) &
+		MVEBU_DEVICE_ID_MASK;
+}
+
+static inline uint32_t cp110_rev_id_get(uintptr_t base)
+{
+	return (mmio_read_32(base + MVEBU_DEVICE_ID_REG) &
+		MVEBU_DEVICE_REV_MASK) >>
+		MVEBU_DEVICE_REV_OFFSET;
+}
+
+void cp110_init(uintptr_t cp110_base, uint32_t stream_id);
+void cp110_ble_init(uintptr_t cp110_base);
+
+#endif /* __CP110_SETUP_H__ */
diff --git a/include/drivers/marvell/thermal.h b/include/drivers/marvell/thermal.h
new file mode 100644
index 00000000..191f97ba
--- /dev/null
+++ b/include/drivers/marvell/thermal.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Driver for thermal unit located in Marvell ARMADA 8K and compatible SoCs */
+
+#ifndef _THERMAL_H
+#define _THERMAL_H
+
+struct tsen_config {
+	/* thermal temperature parameters */
+	int tsen_offset;
+	int tsen_gain;
+	int tsen_divisor;
+	/* thermal data */
+	int tsen_ready;
+	void *regs_base;
+	/* thermal functionality */
+	int (*ptr_tsen_probe)(struct tsen_config *cfg);
+	int (*ptr_tsen_read)(struct tsen_config *cfg, int *temp);
+};
+
+/* Thermal driver APIs */
+int marvell_thermal_init(struct tsen_config *tsen_cfg);
+int marvell_thermal_read(struct tsen_config *tsen_cfg, int *temp);
+struct tsen_config *marvell_thermal_config_get(void);
+
+#endif /* _THERMAL_H */
diff --git a/include/lib/cpus/aarch64/cortex_a72.h b/include/lib/cpus/aarch64/cortex_a72.h
index 9f184706..f5ca2ee7 100644
--- a/include/lib/cpus/aarch64/cortex_a72.h
+++ b/include/lib/cpus/aarch64/cortex_a72.h
@@ -38,6 +38,13 @@
 #define CORTEX_A72_CPUACTLR_EL1_DIS_INSTR_PREFETCH		(ULL(1) << 32)
 
 /*******************************************************************************
+ *  L2 Auxiliary Control register specific definitions.
+ ******************************************************************************/
+#define CORTEX_A72_L2ACTLR_EL1					S3_1_C15_C0_0
+
+#define CORTEX_A72_L2ACTLR_ENABLE_UNIQUE_CLEAN			(ULL(1) << 14)
+
+/*******************************************************************************
  * L2 Control register specific definitions.
  ******************************************************************************/
 #define CORTEX_A72_L2CTLR_EL1				S3_1_C11_C0_2
diff --git a/include/plat/marvell/a8k/common/a8k_common.h b/include/plat/marvell/a8k/common/a8k_common.h
new file mode 100644
index 00000000..e7274679
--- /dev/null
+++ b/include/plat/marvell/a8k/common/a8k_common.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __A8K_COMMON_H__
+#define __A8K_COMMON_H__
+
+#include <amb_adec.h>
+#include <io_win.h>
+#include <iob.h>
+#include <ccu.h>
+
+/*
+ * This struct supports skip image request
+ * detection_method: the method used to detect the request "signal".
+ * info:
+ *	GPIO:
+ *		detection_method: HIGH (pressed button), LOW (unpressed button),
+ *		num (button mpp number).
+ *	i2c:
+ *		i2c_addr: the address of the i2c chosen.
+ *		i2d_reg: the i2c register chosen.
+ *	test:
+ *		choose the DIE you picked the button in (AP or CP).
+ *		in case of CP(cp_index = 0 if CP0, cp_index = 1 if CP1)
+ */
+struct skip_image {
+	enum {
+		GPIO,
+		I2C,
+		USER_DEFINED
+	} detection_method;
+
+	struct {
+		struct {
+			int num;
+			enum {
+				HIGH,
+				LOW
+			} button_state;
+
+		} gpio;
+
+		struct {
+			int i2c_addr;
+			int i2c_reg;
+		} i2c;
+
+		struct {
+			enum {
+				CP,
+				AP
+			} cp_ap;
+			int cp_index;
+		} test;
+	} info;
+};
+
+/*
+ * This struct supports SoC power off method
+ * type: the method used to power off the SoC
+ * cfg:
+ *	PMIC_GPIO:
+ *	pin_count: current GPIO pin number used for toggling the signal for
+ *		   notifying external PMIC
+ *	info:	   holds the GPIOs information, CP GPIO should be used and
+ *		   all GPIOs should be within same GPIO config. register
+ *	step_count: current step number to toggle the GPIO for PMIC
+ *	seq:       GPIO toggling values in sequence, each bit represents a GPIO.
+ *		   For example, bit0 represents first GPIO used for toggling
+ *		   the GPIO the last step is used to trigger the power off
+ *		   signal
+ *	delay_ms:  transition interval for the GPIO setting to take effect
+ *		   in unit of ms
+ */
+/* Max GPIO number used to notify PMIC to power off the SoC */
+#define PMIC_GPIO_MAX_NUMBER		8
+/* Max GPIO toggling steps in sequence to power off the SoC */
+#define PMIC_GPIO_MAX_TOGGLE_STEP	8
+
+enum gpio_output_state {
+	GPIO_LOW = 0,
+	GPIO_HIGH
+};
+
+typedef struct gpio_info {
+	int cp_index;
+	int gpio_index;
+} gpio_info_t;
+
+struct power_off_method {
+	enum {
+		PMIC_GPIO,
+	} type;
+
+	struct {
+		struct {
+			int pin_count;
+			struct gpio_info info[PMIC_GPIO_MAX_NUMBER];
+			int step_count;
+			uint32_t seq[PMIC_GPIO_MAX_TOGGLE_STEP];
+			int delay_ms;
+		} gpio;
+	} cfg;
+};
+
+int marvell_gpio_config(void);
+uint32_t marvell_get_io_win_gcr_target(int ap_idx);
+uint32_t marvell_get_ccu_gcr_target(int ap_idx);
+
+
+/*
+ * The functions below are defined as Weak and may be overridden
+ * in specific Marvell standard platform
+ */
+int marvell_get_amb_memory_map(struct addr_map_win **win,
+			       uint32_t *size, uintptr_t base);
+int marvell_get_io_win_memory_map(int ap_idx, struct addr_map_win **win,
+				  uint32_t *size);
+int marvell_get_iob_memory_map(struct addr_map_win **win,
+			       uint32_t *size, uintptr_t base);
+int marvell_get_ccu_memory_map(int ap_idx, struct addr_map_win **win,
+			       uint32_t *size);
+
+#endif /* __A8K_COMMON_H__ */
diff --git a/include/plat/marvell/a8k/common/board_marvell_def.h b/include/plat/marvell/a8k/common/board_marvell_def.h
new file mode 100644
index 00000000..b1054db2
--- /dev/null
+++ b/include/plat/marvell/a8k/common/board_marvell_def.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __BOARD_MARVELL_DEF_H__
+#define __BOARD_MARVELL_DEF_H__
+
+/*
+ * Required platform porting definitions common to all ARM
+ * development platforms
+ */
+
+/* Size of cacheable stacks */
+#if DEBUG_XLAT_TABLE
+# define PLATFORM_STACK_SIZE 0x800
+#elif IMAGE_BL1
+#if TRUSTED_BOARD_BOOT
+# define PLATFORM_STACK_SIZE 0x1000
+#else
+# define PLATFORM_STACK_SIZE 0x440
+#endif
+#elif IMAGE_BL2
+# if TRUSTED_BOARD_BOOT
+#  define PLATFORM_STACK_SIZE 0x1000
+# else
+#  define PLATFORM_STACK_SIZE 0x400
+# endif
+#elif IMAGE_BL31
+# define PLATFORM_STACK_SIZE 0x400
+#elif IMAGE_BL32
+# define PLATFORM_STACK_SIZE 0x440
+#endif
+
+/*
+ * PLAT_MARVELL_MMAP_ENTRIES depends on the number of entries in the
+ * plat_arm_mmap array defined for each BL stage.
+ */
+#if IMAGE_BLE
+#  define PLAT_MARVELL_MMAP_ENTRIES	3
+#endif
+#if IMAGE_BL1
+#  if TRUSTED_BOARD_BOOT
+#   define PLAT_MARVELL_MMAP_ENTRIES	7
+#  else
+#   define PLAT_MARVELL_MMAP_ENTRIES	6
+#  endif	/* TRUSTED_BOARD_BOOT */
+#endif
+#if IMAGE_BL2
+#  define PLAT_MARVELL_MMAP_ENTRIES		8
+#endif
+#if IMAGE_BL31
+#define PLAT_MARVELL_MMAP_ENTRIES		5
+#endif
+
+/*
+ * Platform specific page table and MMU setup constants
+ */
+#if IMAGE_BL1
+#define MAX_XLAT_TABLES			4
+#elif IMAGE_BLE
+#  define MAX_XLAT_TABLES		4
+#elif IMAGE_BL2
+#  define MAX_XLAT_TABLES		4
+#elif IMAGE_BL31
+# define MAX_XLAT_TABLES		4
+#elif IMAGE_BL32
+#  define MAX_XLAT_TABLES               4
+#endif
+
+#define MAX_IO_DEVICES			3
+#define MAX_IO_HANDLES			4
+
+#define PLAT_MARVELL_TRUSTED_SRAM_SIZE	0x80000	/* 512 KB */
+
+
+#endif /* __BOARD_MARVELL_DEF_H__ */
diff --git a/include/plat/marvell/a8k/common/marvell_def.h b/include/plat/marvell/a8k/common/marvell_def.h
new file mode 100644
index 00000000..7dacf820
--- /dev/null
+++ b/include/plat/marvell/a8k/common/marvell_def.h
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MARVELL_DEF_H__
+#define __MARVELL_DEF_H__
+
+#include <arch.h>
+#include <common_def.h>
+#include <platform_def.h>
+#include <tbbr_img_def.h>
+#include <xlat_tables.h>
+
+
+/******************************************************************************
+ * Definitions common to all MARVELL standard platforms
+ *****************************************************************************/
+
+/* Special value used to verify platform parameters from BL2 to BL31 */
+#define MARVELL_BL31_PLAT_PARAM_VAL		0x0f1e2d3c4b5a6978ULL
+
+
+#define MARVELL_CACHE_WRITEBACK_SHIFT	6
+
+/*
+ * Macros mapping the MPIDR Affinity levels to MARVELL Platform Power levels.
+ * The power levels have a 1:1 mapping with the MPIDR affinity levels.
+ */
+#define MARVELL_PWR_LVL0		MPIDR_AFFLVL0
+#define MARVELL_PWR_LVL1		MPIDR_AFFLVL1
+#define MARVELL_PWR_LVL2		MPIDR_AFFLVL2
+
+/*
+ *  Macros for local power states in Marvell platforms encoded by
+ *  State-ID field within the power-state parameter.
+ */
+/* Local power state for power domains in Run state. */
+#define MARVELL_LOCAL_STATE_RUN	0
+/* Local power state for retention. Valid only for CPU power domains */
+#define MARVELL_LOCAL_STATE_RET	1
+/*
+ * Local power state for OFF/power-down. Valid for CPU
+ * and cluster power domains
+ */
+#define MARVELL_LOCAL_STATE_OFF	2
+
+/* The first 4KB of Trusted SRAM are used as shared memory */
+#define MARVELL_TRUSTED_SRAM_BASE	PLAT_MARVELL_ATF_BASE
+#define MARVELL_SHARED_RAM_BASE		MARVELL_TRUSTED_SRAM_BASE
+#define MARVELL_SHARED_RAM_SIZE		0x00001000	/* 4 KB */
+
+/* The remaining Trusted SRAM is used to load the BL images */
+#define MARVELL_BL_RAM_BASE		(MARVELL_SHARED_RAM_BASE +	\
+					 MARVELL_SHARED_RAM_SIZE)
+#define MARVELL_BL_RAM_SIZE		(PLAT_MARVELL_TRUSTED_SRAM_SIZE - \
+					 MARVELL_SHARED_RAM_SIZE)
+/* Non-shared DRAM */
+#define MARVELL_DRAM_BASE		ULL(0x0)
+#define MARVELL_DRAM_SIZE		ULL(0x80000000)
+#define MARVELL_DRAM_END		(MARVELL_DRAM_BASE + \
+					 MARVELL_DRAM_SIZE - 1)
+
+#define MARVELL_IRQ_SEC_PHY_TIMER	29
+
+#define MARVELL_IRQ_SEC_SGI_0		8
+#define MARVELL_IRQ_SEC_SGI_1		9
+#define MARVELL_IRQ_SEC_SGI_2		10
+#define MARVELL_IRQ_SEC_SGI_3		11
+#define MARVELL_IRQ_SEC_SGI_4		12
+#define MARVELL_IRQ_SEC_SGI_5		13
+#define MARVELL_IRQ_SEC_SGI_6		14
+#define MARVELL_IRQ_SEC_SGI_7		15
+
+#define MARVELL_MAP_SHARED_RAM		MAP_REGION_FLAT(		\
+						MARVELL_SHARED_RAM_BASE,\
+						MARVELL_SHARED_RAM_SIZE,\
+						MT_MEMORY | MT_RW | MT_SECURE)
+
+#define MARVELL_MAP_DRAM		MAP_REGION_FLAT(		\
+						MARVELL_DRAM_BASE,	\
+						MARVELL_DRAM_SIZE,	\
+						MT_MEMORY | MT_RW | MT_NS)
+
+
+/*
+ * The number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+#if USE_COHERENT_MEM
+#define MARVELL_BL_REGIONS		3
+#else
+#define MARVELL_BL_REGIONS		2
+#endif
+
+#define MAX_MMAP_REGIONS		(PLAT_MARVELL_MMAP_ENTRIES +	\
+					 MARVELL_BL_REGIONS)
+
+#define MARVELL_CONSOLE_BAUDRATE	115200
+
+/******************************************************************************
+ * Required platform porting definitions common to all MARVELL std. platforms
+ *****************************************************************************/
+
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE		MARVELL_LOCAL_STATE_RET
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE		MARVELL_LOCAL_STATE_OFF
+
+
+#define PLATFORM_CORE_COUNT		PLAT_MARVELL_CORE_COUNT
+#define PLAT_NUM_PWR_DOMAINS		(PLAT_MARVELL_CLUSTER_COUNT +	\
+					 PLATFORM_CORE_COUNT)
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE		(1 << MARVELL_CACHE_WRITEBACK_SHIFT)
+
+
+/*******************************************************************************
+ * BL1 specific defines.
+ * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
+ * addresses.
+ ******************************************************************************/
+#define BL1_RO_BASE			PLAT_MARVELL_TRUSTED_ROM_BASE
+#define BL1_RO_LIMIT			(PLAT_MARVELL_TRUSTED_ROM_BASE	\
+					 + PLAT_MARVELL_TRUSTED_ROM_SIZE)
+/*
+ * Put BL1 RW at the top of the Trusted SRAM.
+ */
+#define BL1_RW_BASE		(MARVELL_BL_RAM_BASE +		\
+					MARVELL_BL_RAM_SIZE -	\
+					PLAT_MARVELL_MAX_BL1_RW_SIZE)
+#define BL1_RW_LIMIT		(MARVELL_BL_RAM_BASE + MARVELL_BL_RAM_SIZE)
+
+/*******************************************************************************
+ * BLE specific defines.
+ ******************************************************************************/
+#define BLE_BASE			PLAT_MARVELL_SRAM_BASE
+#define BLE_LIMIT			PLAT_MARVELL_SRAM_END
+
+/*******************************************************************************
+ * BL2 specific defines.
+ ******************************************************************************/
+/*
+ * Put BL2 just below BL31.
+ */
+#define BL2_BASE			(BL31_BASE - PLAT_MARVELL_MAX_BL2_SIZE)
+#define BL2_LIMIT			BL31_BASE
+
+/*******************************************************************************
+ * BL31 specific defines.
+ ******************************************************************************/
+/*
+ * Put BL31 at the top of the Trusted SRAM.
+ */
+#define BL31_BASE			(MARVELL_BL_RAM_BASE +		\
+						MARVELL_BL_RAM_SIZE -	\
+						PLAT_MARVEL_MAX_BL31_SIZE)
+#define BL31_PROGBITS_LIMIT		BL1_RW_BASE
+#define BL31_LIMIT			(MARVELL_BL_RAM_BASE +	\
+					 MARVELL_BL_RAM_SIZE)
+
+
+#endif /* __MARVELL_DEF_H__ */
diff --git a/include/plat/marvell/a8k/common/plat_marvell.h b/include/plat/marvell/a8k/common/plat_marvell.h
new file mode 100644
index 00000000..aad5da79
--- /dev/null
+++ b/include/plat/marvell/a8k/common/plat_marvell.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PLAT_MARVELL_H__
+#define __PLAT_MARVELL_H__
+
+#include <cassert.h>
+#include <cpu_data.h>
+#include <stdint.h>
+#include <utils.h>
+#include <xlat_tables.h>
+
+/*
+ * Extern declarations common to Marvell standard platforms
+ */
+extern const mmap_region_t plat_marvell_mmap[];
+
+#define MARVELL_CASSERT_MMAP						\
+	CASSERT((ARRAY_SIZE(plat_marvell_mmap) + MARVELL_BL_REGIONS)	\
+		<= MAX_MMAP_REGIONS,					\
+		assert_max_mmap_regions)
+
+/*
+ * Utility functions common to Marvell standard platforms
+ */
+void marvell_setup_page_tables(uintptr_t total_base,
+			       size_t total_size,
+			       uintptr_t code_start,
+			       uintptr_t code_limit,
+			       uintptr_t rodata_start,
+			       uintptr_t rodata_limit
+#if USE_COHERENT_MEM
+			     , uintptr_t coh_start,
+			       uintptr_t coh_limit
+#endif
+);
+
+/* IO storage utility functions */
+void marvell_io_setup(void);
+
+/* Systimer utility function */
+void marvell_configure_sys_timer(void);
+
+/* Topology utility function */
+int marvell_check_mpidr(u_register_t mpidr);
+
+/* BLE utility functions */
+int ble_plat_setup(int *skip);
+void plat_marvell_dram_update_topology(void);
+void ble_plat_pcie_ep_setup(void);
+struct pci_hw_cfg *plat_get_pcie_hw_data(void);
+
+/* BL1 utility functions */
+void marvell_bl1_early_platform_setup(void);
+void marvell_bl1_platform_setup(void);
+void marvell_bl1_plat_arch_setup(void);
+
+/* BL2 utility functions */
+void marvell_bl2_early_platform_setup(meminfo_t *mem_layout);
+void marvell_bl2_platform_setup(void);
+void marvell_bl2_plat_arch_setup(void);
+uint32_t marvell_get_spsr_for_bl32_entry(void);
+uint32_t marvell_get_spsr_for_bl33_entry(void);
+
+/* BL31 utility functions */
+void marvell_bl31_early_platform_setup(bl31_params_t *from_bl2,
+				void *plat_params_from_bl2);
+void marvell_bl31_platform_setup(void);
+void marvell_bl31_plat_runtime_setup(void);
+void marvell_bl31_plat_arch_setup(void);
+
+/* Power management config to power off the SoC */
+void *plat_marvell_get_pm_cfg(void);
+
+/* Check if MSS AP CM3 firmware contains PM support */
+_Bool is_pm_fw_running(void);
+
+/* Bootrom image recovery utility functions */
+void *plat_marvell_get_skip_image_data(void);
+
+/* FIP TOC validity check */
+int marvell_io_is_toc_valid(void);
+
+/*
+ * PSCI functionality
+ */
+void marvell_psci_arch_init(int ap_idx);
+void plat_marvell_system_reset(void);
+
+/*
+ * Optional functions required in Marvell standard platforms
+ */
+void plat_marvell_io_setup(void);
+int plat_marvell_get_alt_image_source(
+	unsigned int image_id,
+	uintptr_t *dev_handle,
+	uintptr_t *image_spec);
+unsigned int plat_marvell_calc_core_pos(u_register_t mpidr);
+
+const mmap_region_t *plat_marvell_get_mmap(void);
+void marvell_ble_prepare_exit(void);
+void marvell_exit_bootrom(uintptr_t base);
+
+int plat_marvell_early_cpu_powerdown(void);
+#endif /* __PLAT_MARVELL_H__ */
diff --git a/include/plat/marvell/a8k/common/plat_pm_trace.h b/include/plat/marvell/a8k/common/plat_pm_trace.h
new file mode 100644
index 00000000..0878959c
--- /dev/null
+++ b/include/plat/marvell/a8k/common/plat_pm_trace.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PLAT_PM_TRACE_H
+#define __PLAT_PM_TRACE_H
+
+
+/*
+ * PM Trace is for Debug purpose only!!!
+ * It should not be enabled during System Run time
+ */
+#undef PM_TRACE_ENABLE
+
+
+/* trace entry time */
+struct pm_trace_entry {
+	/* trace entry time stamp */
+	unsigned int timestamp;
+
+	/* trace info
+	 * [16-31] - API Trace Id
+	 * [00-15] - API Step Id
+	 */
+	unsigned int trace_info;
+};
+
+struct pm_trace_ctrl {
+	/* trace pointer - points to next free entry in trace cyclic queue */
+	unsigned int trace_pointer;
+
+	/* trace count - number of entries in the queue, clear upon read */
+	unsigned int trace_count;
+};
+
+/* trace size definition */
+#define AP_MSS_ATF_CORE_INFO_SIZE	(256)
+#define AP_MSS_ATF_CORE_ENTRY_SIZE	(8)
+#define AP_MSS_ATF_TRACE_SIZE_MASK	(0xFF)
+
+/* trace address definition */
+#define AP_MSS_TIMER_BASE		(MVEBU_REGS_BASE_MASK + 0x580110)
+
+#define AP_MSS_ATF_CORE_0_CTRL_BASE	(MVEBU_REGS_BASE_MASK + 0x520140)
+#define AP_MSS_ATF_CORE_1_CTRL_BASE	(MVEBU_REGS_BASE_MASK + 0x520150)
+#define AP_MSS_ATF_CORE_2_CTRL_BASE	(MVEBU_REGS_BASE_MASK + 0x520160)
+#define AP_MSS_ATF_CORE_3_CTRL_BASE	(MVEBU_REGS_BASE_MASK + 0x520170)
+#define AP_MSS_ATF_CORE_CTRL_BASE	(AP_MSS_ATF_CORE_0_CTRL_BASE)
+
+#define AP_MSS_ATF_CORE_0_INFO_BASE	(MVEBU_REGS_BASE_MASK + 0x5201C0)
+#define AP_MSS_ATF_CORE_0_INFO_TRACE	(MVEBU_REGS_BASE_MASK + 0x5201C4)
+#define AP_MSS_ATF_CORE_1_INFO_BASE	(MVEBU_REGS_BASE_MASK + 0x5209C0)
+#define AP_MSS_ATF_CORE_1_INFO_TRACE	(MVEBU_REGS_BASE_MASK + 0x5209C4)
+#define AP_MSS_ATF_CORE_2_INFO_BASE	(MVEBU_REGS_BASE_MASK + 0x5211C0)
+#define AP_MSS_ATF_CORE_2_INFO_TRACE	(MVEBU_REGS_BASE_MASK + 0x5211C4)
+#define AP_MSS_ATF_CORE_3_INFO_BASE	(MVEBU_REGS_BASE_MASK + 0x5219C0)
+#define AP_MSS_ATF_CORE_3_INFO_TRACE	(MVEBU_REGS_BASE_MASK + 0x5219C4)
+#define AP_MSS_ATF_CORE_INFO_BASE	(AP_MSS_ATF_CORE_0_INFO_BASE)
+
+/* trace info definition */
+#define TRACE_PWR_DOMAIN_OFF		(0x10000)
+#define TRACE_PWR_DOMAIN_SUSPEND	(0x20000)
+#define TRACE_PWR_DOMAIN_SUSPEND_FINISH	(0x30000)
+#define TRACE_PWR_DOMAIN_ON		(0x40000)
+#define TRACE_PWR_DOMAIN_ON_FINISH	(0x50000)
+
+#define TRACE_PWR_DOMAIN_ON_MASK	(0xFF)
+
+#ifdef PM_TRACE_ENABLE
+
+/* trace API definition */
+void pm_core_0_trace(unsigned int trace);
+void pm_core_1_trace(unsigned int trace);
+void pm_core_2_trace(unsigned int trace);
+void pm_core_3_trace(unsigned int trace);
+
+typedef void (*core_trace_func)(unsigned int);
+
+extern core_trace_func funcTbl[PLATFORM_CORE_COUNT];
+
+#define PM_TRACE(trace) funcTbl[plat_my_core_pos()](trace)
+
+#else
+
+#define PM_TRACE(trace)
+
+#endif
+
+/*******************************************************************************
+ * pm_trace_add
+ *
+ * DESCRIPTION: Add PM trace
+ ******************************************************************************
+ */
+void pm_trace_add(unsigned int trace, unsigned int core);
+
+#endif /* __PLAT_PM_TRACE_H */
diff --git a/include/plat/marvell/common/aarch64/cci_macros.S b/include/plat/marvell/common/aarch64/cci_macros.S
new file mode 100644
index 00000000..d6080cfd
--- /dev/null
+++ b/include/plat/marvell/common/aarch64/cci_macros.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __CCI_MACROS_S__
+#define __CCI_MACROS_S__
+
+#include <cci.h>
+#include <platform_def.h>
+
+.section .rodata.cci_reg_name, "aS"
+cci_iface_regs:
+	.asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
+
+	/* ------------------------------------------------
+	 * The below required platform porting macro prints
+	 * out relevant interconnect registers whenever an
+	 * unhandled exception is taken in BL31.
+	 * Clobbers: x0 - x9, sp
+	 * ------------------------------------------------
+	 */
+	.macro print_cci_regs
+	adr	x6, cci_iface_regs
+	/* Store in x7 the base address of the first interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER0_SL_IFACE_IX))
+	ldr	w8, [x7, #SNOOP_CTRL_REG]
+	/* Store in x7 the base address of the second interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER1_SL_IFACE_IX))
+	ldr	w9, [x7, #SNOOP_CTRL_REG]
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+	.endm
+
+#endif /* __CCI_MACROS_S__ */
diff --git a/include/plat/marvell/common/aarch64/marvell_macros.S b/include/plat/marvell/common/aarch64/marvell_macros.S
new file mode 100644
index 00000000..0102af04
--- /dev/null
+++ b/include/plat/marvell/common/aarch64/marvell_macros.S
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MARVELL_MACROS_S__
+#define __MARVELL_MACROS_S__
+
+#include <cci.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include <gicv3.h>
+#include <platform_def.h>
+
+/*
+ *	These Macros are required by ATF
+ */
+
+.section .rodata.gic_reg_name, "aS"
+/* Applicable only to GICv2 and GICv3 with SRE disabled (legacy mode) */
+gicc_regs:
+	.asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
+
+#ifdef USE_CCI
+/* Applicable only to GICv3 with SRE enabled */
+icc_regs:
+	.asciz "icc_hppir0_el1", "icc_hppir1_el1", "icc_ctlr_el3", ""
+#endif
+/* Registers common to both GICv2 and GICv3 */
+gicd_pend_reg:
+	.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n"	\
+		" Offset:\t\t\tvalue\n"
+newline:
+	.asciz "\n"
+spacer:
+	.asciz ":\t\t0x"
+
+	/* ---------------------------------------------
+	 * The below utility macro prints out relevant GIC
+	 * registers whenever an unhandled exception is
+	 * taken in BL31 on ARM standard platforms.
+	 * Expects: GICD base in x16, GICC base in x17
+	 * Clobbers: x0 - x10, sp
+	 * ---------------------------------------------
+	 */
+	.macro arm_print_gic_regs
+	/* Check for GICv3 system register access */
+	mrs	x7, id_aa64pfr0_el1
+	ubfx	x7, x7, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH
+	cmp	x7, #1
+	b.ne	print_gicv2
+
+	/* Check for SRE enable */
+	mrs	x8, ICC_SRE_EL3
+	tst	x8, #ICC_SRE_SRE_BIT
+	b.eq	print_gicv2
+
+#ifdef USE_CCI
+	/* Load the icc reg list to x6 */
+	adr	x6, icc_regs
+	/* Load the icc regs to gp regs used by str_in_crash_buf_print */
+	mrs	x8, ICC_HPPIR0_EL1
+	mrs	x9, ICC_HPPIR1_EL1
+	mrs	x10, ICC_CTLR_EL3
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+#endif
+	b	print_gic_common
+
+print_gicv2:
+	/* Load the gicc reg list to x6 */
+	adr	x6, gicc_regs
+	/* Load the gicc regs to gp regs used by str_in_crash_buf_print */
+	ldr	w8, [x17, #GICC_HPPIR]
+	ldr	w9, [x17, #GICC_AHPPIR]
+	ldr	w10, [x17, #GICC_CTLR]
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+
+print_gic_common:
+	/* Print the GICD_ISPENDR regs */
+	add	x7, x16, #GICD_ISPENDR
+	adr	x4, gicd_pend_reg
+	bl	asm_print_str
+gicd_ispendr_loop:
+	sub	x4, x7, x16
+	cmp	x4, #0x280
+	b.eq	exit_print_gic_regs
+	bl	asm_print_hex
+
+	adr	x4, spacer
+	bl	asm_print_str
+
+	ldr	x4, [x7], #8
+	bl	asm_print_hex
+
+	adr	x4, newline
+	bl	asm_print_str
+	b	gicd_ispendr_loop
+exit_print_gic_regs:
+	.endm
+
+
+.section .rodata.cci_reg_name, "aS"
+cci_iface_regs:
+	.asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
+
+	/* ------------------------------------------------
+	 * The below required platform porting macro prints
+	 * out relevant interconnect registers whenever an
+	 * unhandled exception is taken in BL31.
+	 * Clobbers: x0 - x9, sp
+	 * ------------------------------------------------
+	 */
+	.macro print_cci_regs
+#ifdef USE_CCI
+	adr	x6, cci_iface_regs
+	/* Store in x7 the base address of the first interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER0_SL_IFACE_IX))
+	ldr	w8, [x7, #SNOOP_CTRL_REG]
+	/* Store in x7 the base address of the second interface */
+	mov_imm	x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET(	\
+			PLAT_MARVELL_CCI_CLUSTER1_SL_IFACE_IX))
+	ldr	w9, [x7, #SNOOP_CTRL_REG]
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+#endif
+	.endm
+
+
+#endif /* __MARVELL_MACROS_S__ */
diff --git a/include/plat/marvell/common/marvell_plat_priv.h b/include/plat/marvell/common/marvell_plat_priv.h
new file mode 100644
index 00000000..c1dad0ef
--- /dev/null
+++ b/include/plat/marvell/common/marvell_plat_priv.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MARVELL_PLAT_PRIV_H__
+#define __MARVELL_PLAT_PRIV_H__
+
+#include <utils.h>
+
+/*****************************************************************************
+ * Function and variable prototypes
+ *****************************************************************************
+ */
+void plat_delay_timer_init(void);
+
+uint64_t mvebu_get_dram_size(uint64_t ap_base_addr);
+
+/*
+ * GIC operation, mandatory functions required in Marvell standard platforms
+ */
+void plat_marvell_gic_driver_init(void);
+void plat_marvell_gic_init(void);
+void plat_marvell_gic_cpuif_enable(void);
+void plat_marvell_gic_cpuif_disable(void);
+void plat_marvell_gic_pcpu_init(void);
+void plat_marvell_gic_irq_save(void);
+void plat_marvell_gic_irq_restore(void);
+void plat_marvell_gic_irq_pcpu_save(void);
+void plat_marvell_gic_irq_pcpu_restore(void);
+
+#endif /* __MARVELL_PLAT_PRIV_H__ */
diff --git a/include/plat/marvell/common/marvell_pm.h b/include/plat/marvell/common/marvell_pm.h
new file mode 100644
index 00000000..2817a462
--- /dev/null
+++ b/include/plat/marvell/common/marvell_pm.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef _MARVELL_PM_H_
+#define _MARVELL_PM_H_
+
+#define MVEBU_MAILBOX_MAGIC_NUM		PLAT_MARVELL_MAILBOX_MAGIC_NUM
+#define MVEBU_MAILBOX_SUSPEND_STATE	0xb007de7c
+
+/* Mailbox entry indexes */
+/* Magic number for validity check */
+#define	MBOX_IDX_MAGIC			0
+/* Recovery from suspend entry point */
+#define	MBOX_IDX_SEC_ADDR		1
+/* Suspend state magic number */
+#define	MBOX_IDX_SUSPEND_MAGIC		2
+/* Recovery jump address for ROM bypass */
+#define	MBOX_IDX_ROM_EXIT_ADDR		3
+/* BLE execution start counter value */
+#define	MBOX_IDX_START_CNT		4
+
+#endif /* _MARVELL_PM_H_ */
diff --git a/include/plat/marvell/common/mvebu.h b/include/plat/marvell/common/mvebu.h
new file mode 100644
index 00000000..a20e538e
--- /dev/null
+++ b/include/plat/marvell/common/mvebu.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C)  2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef _MVEBU_H_
+#define _MVEBU_H_
+
+/* Use this functions only when printf is allowed */
+#define debug_enter()	VERBOSE("----> Enter %s\n", __func__)
+#define debug_exit()	VERBOSE("<---- Exit  %s\n", __func__)
+
+/* Macro for testing alignment. Positive if number is NOT aligned */
+#define IS_NOT_ALIGN(number, align)	((number) & ((align) - 1))
+
+/* Macro for alignment up. For example, ALIGN_UP(0x0330, 0x20) = 0x0340 */
+#define ALIGN_UP(number, align) (((number) & ((align) - 1)) ? \
+		(((number) + (align)) & ~((align)-1)) : (number))
+
+/* Macro for testing whether a number is a power of 2. Positive if so */
+#define IS_POWER_OF_2(number)	((number) != 0 && \
+				(((number) & ((number) - 1)) == 0))
+
+/*
+ * Macro for ronding up to next power of 2
+ * it is done by count leading 0 (clz assembly opcode) and see msb set bit.
+ * then you can shift it left and get number which power of 2
+ * Note: this Macro is for 32 bit number
+ */
+#define ROUND_UP_TO_POW_OF_2(number)	(1 << \
+					(32 - __builtin_clz((number) - 1)))
+
+#define _1MB_				(1024ULL*1024ULL)
+#define _1GB_				(_1MB_*1024ULL)
+
+#endif	/* MVEBU_H */
diff --git a/maintainers.rst b/maintainers.rst
index 638f66a7..76fede82 100644
--- a/maintainers.rst
+++ b/maintainers.rst
@@ -66,6 +66,14 @@ MediaTek platform ports
 :G: `mtk09422`_
 :F: plat/mediatek/
 
+Marvell platform ports and SoC drivers
+--------------------------------------
+:M: Konstantin Porotchkin <kostap@marvell.com>
+:G: `kostapr`_
+:F: docs/plat/marvell/
+:F: plat/marvell/
+:F: drivers/marvell/
+
 NVidia platform ports
 ---------------------
 :M: Varun Wadekar <vwadekar@nvidia.com>
@@ -165,6 +173,7 @@ Xilinx platform port
 .. _glneo: https://github.com/glneo
 .. _hzhuang1: https://github.com/hzhuang1
 .. _jenswi-linaro: https://github.com/jenswi-linaro
+.. _kostapr: https://github.com/kostapr
 .. _masahir0y: https://github.com/masahir0y
 .. _mtk09422: https://github.com/mtk09422
 .. _qoriq-open-source: https://github.com/qoriq-open-source
diff --git a/make_helpers/build_macros.mk b/make_helpers/build_macros.mk
index 2a6ded49..1184b7af 100644
--- a/make_helpers/build_macros.mk
+++ b/make_helpers/build_macros.mk
@@ -290,6 +290,7 @@ define MAKE_BL
         $(eval DUMP       := $(call IMG_DUMP,$(1)))
         $(eval BIN        := $(call IMG_BIN,$(1)))
         $(eval BL_LINKERFILE := $(BL$(call uppercase,$(1))_LINKERFILE))
+        $(eval BL_LIBS    := $(BL$(call uppercase,$(1))_LIBS))
         # We use sort only to get a list of unique object directory names.
         # ordering is not relevant but sort removes duplicates.
         $(eval TEMP_OBJ_DIRS := $(sort $(dir ${OBJS} ${LINKERFILE})))
@@ -312,7 +313,7 @@ bl${1}_dirs: | ${OBJ_DIRS}
 $(eval $(call MAKE_OBJS,$(BUILD_DIR),$(SOURCES),$(1)))
 $(eval $(call MAKE_LD,$(LINKERFILE),$(BL_LINKERFILE),$(1)))
 
-$(ELF): $(OBJS) $(LINKERFILE) | bl$(1)_dirs
+$(ELF): $(OBJS) $(LINKERFILE) | bl$(1)_dirs $(BL_LIBS)
 	@echo "  LD      $$@"
 ifdef MAKE_BUILD_STRINGS
 	$(call MAKE_BUILD_STRINGS, $(BUILD_DIR)/build_message.o)
@@ -322,7 +323,7 @@ else
 		$$(CC) $$(TF_CFLAGS) $$(CFLAGS) -xc -c - -o $(BUILD_DIR)/build_message.o
 endif
 	$$(Q)$$(LD) -o $$@ $$(TF_LDFLAGS) $$(LDFLAGS) -Map=$(MAPFILE) \
-		--script $(LINKERFILE) $(BUILD_DIR)/build_message.o $(OBJS) $(LDLIBS)
+		--script $(LINKERFILE) $(BUILD_DIR)/build_message.o $(OBJS) $(LDLIBS) $(BL_LIBS)
 
 $(DUMP): $(ELF)
 	@echo "  OD      $$@"
diff --git a/plat/marvell/a8k/a70x0/board/dram_port.c b/plat/marvell/a8k/a70x0/board/dram_port.c
new file mode 100644
index 00000000..c6702589
--- /dev/null
+++ b/plat/marvell/a8k/a70x0/board/dram_port.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch_helpers.h>
+#include <debug.h>
+#include <mv_ddr_if.h>
+#include <plat_marvell.h>
+
+/*
+ * This function may modify the default DRAM parameters
+ * based on information received from SPD or bootloader
+ * configuration located on non volatile storage
+ */
+void plat_marvell_dram_update_topology(void)
+{
+}
+
+/*
+ * This struct provides the DRAM training code with
+ * the appropriate board DRAM configuration
+ */
+static struct mv_ddr_topology_map board_topology_map = {
+/* FIXME: MISL board 2CS 4Gb x8 devices of micron - 2133P */
+	DEBUG_LEVEL_ERROR,
+	0x1, /* active interfaces */
+	/* cs_mask, mirror, dqs_swap, ck_swap X subphys */
+	{ { { {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0} },
+	   SPEED_BIN_DDR_2133P,		/* speed_bin */
+	   MV_DDR_DEV_WIDTH_8BIT,	/* sdram device width */
+	   MV_DDR_DIE_CAP_4GBIT,	/* die capacity */
+	   MV_DDR_FREQ_SAR,		/* frequency */
+	   0, 0,			/* cas_l, cas_wl */
+	   MV_DDR_TEMP_LOW} },		/* temperature */
+	MV_DDR_32BIT_ECC_PUP8_BUS_MASK,	/* subphys mask */
+	MV_DDR_CFG_DEFAULT,		/* ddr configuration data source */
+	{ {0} },			/* raw spd data */
+	{0},				/* timing parameters */
+	{				/* electrical configuration */
+		{			/* memory electrical configuration */
+			MV_DDR_RTT_NOM_PARK_RZQ_DISABLE,	/* rtt_nom */
+			{
+				MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */
+				MV_DDR_RTT_NOM_PARK_RZQ_DIV1  /* rtt_park 2cs */
+			},
+			{
+				MV_DDR_RTT_WR_DYN_ODT_OFF,	/* rtt_wr 1cs */
+				MV_DDR_RTT_WR_RZQ_DIV2		/* rtt_wr 2cs */
+			},
+			MV_DDR_DIC_RZQ_DIV7	/* dic */
+		},
+		{			/* phy electrical configuration */
+			MV_DDR_OHM_30,	/* data_drv_p */
+			MV_DDR_OHM_30,	/* data_drv_n */
+			MV_DDR_OHM_30,	/* ctrl_drv_p */
+			MV_DDR_OHM_30,	/* ctrl_drv_n */
+			{
+				MV_DDR_OHM_60,	/* odt_p 1cs */
+				MV_DDR_OHM_120	/* odt_p 2cs */
+			},
+			{
+				MV_DDR_OHM_60,	/* odt_n 1cs */
+				MV_DDR_OHM_120	/* odt_n 2cs */
+			},
+		},
+		{			/* mac electrical configuration */
+			MV_DDR_ODT_CFG_NORMAL,		/* odtcfg_pattern */
+			MV_DDR_ODT_CFG_ALWAYS_ON,	/* odtcfg_write */
+			MV_DDR_ODT_CFG_NORMAL,		/* odtcfg_read */
+		},
+	}
+};
+
+struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
+{
+	/* Return the board topology as defined in the board code */
+	return &board_topology_map;
+}
diff --git a/plat/marvell/a8k/a70x0/board/marvell_plat_config.c b/plat/marvell/a8k/a70x0/board/marvell_plat_config.c
new file mode 100644
index 00000000..91719867
--- /dev/null
+++ b/plat/marvell/a8k/a70x0/board/marvell_plat_config.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <a8k_common.h>
+
+/*
+ * If bootrom is currently at BLE there's no need to include the memory
+ * maps structure at this point
+ */
+#include <mvebu_def.h>
+#ifndef IMAGE_BLE
+
+/*****************************************************************************
+ * AMB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win amb_memory_map[] = {
+	/* CP0 SPI1 CS0 Direct Mode access */
+	{0xf900,	0x1000000,	AMB_SPI1_CS0_ID},
+};
+
+int marvell_get_amb_memory_map(struct addr_map_win **win,
+			       uint32_t *size, uintptr_t base)
+{
+	*win = amb_memory_map;
+	if (*win == NULL)
+		*size = 0;
+	else
+		*size = ARRAY_SIZE(amb_memory_map);
+
+	return 0;
+}
+#endif
+
+/*****************************************************************************
+ * IO_WIN Configuration
+ *****************************************************************************
+ */
+struct addr_map_win io_win_memory_map[] = {
+#ifndef IMAGE_BLE
+	/* MCI 0 indirect window */
+	{MVEBU_MCI_REG_BASE_REMAP(0),	0x100000, MCI_0_TID},
+	/* MCI 1 indirect window */
+	{MVEBU_MCI_REG_BASE_REMAP(1),	0x100000, MCI_1_TID},
+#endif
+};
+
+uint32_t marvell_get_io_win_gcr_target(int ap_index)
+{
+	return PIDI_TID;
+}
+
+int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
+				  uint32_t *size)
+{
+	*win = io_win_memory_map;
+	if (*win == NULL)
+		*size = 0;
+	else
+		*size = ARRAY_SIZE(io_win_memory_map);
+
+	return 0;
+}
+
+#ifndef IMAGE_BLE
+/*****************************************************************************
+ * IOB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win iob_memory_map[] = {
+	/* PEX1_X1 window */
+	{0x00000000f7000000,	0x1000000,	PEX1_TID},
+	/* PEX2_X1 window */
+	{0x00000000f8000000,	0x1000000,	PEX2_TID},
+	/* PEX0_X4 window */
+	{0x00000000f6000000,	0x1000000,	PEX0_TID},
+	/* SPI1_CS0 (RUNIT) window */
+	{0x00000000f9000000,	0x1000000,	RUNIT_TID},
+};
+
+int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
+			       uintptr_t base)
+{
+	*win = iob_memory_map;
+	*size = ARRAY_SIZE(iob_memory_map);
+
+	return 0;
+}
+#endif
+
+/*****************************************************************************
+ * CCU Configuration
+ *****************************************************************************
+ */
+struct addr_map_win ccu_memory_map[] = {	/* IO window */
+#ifdef IMAGE_BLE
+	{0x00000000f2000000,	0x4000000,	IO_0_TID}, /* IO window */
+#else
+	{0x00000000f2000000,	0xe000000,	IO_0_TID},
+#endif
+};
+
+uint32_t marvell_get_ccu_gcr_target(int ap)
+{
+	return DRAM_0_TID;
+}
+
+int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win,
+			       uint32_t *size)
+{
+	*win = ccu_memory_map;
+	*size = ARRAY_SIZE(ccu_memory_map);
+
+	return 0;
+}
+
+#ifdef IMAGE_BLE
+/*****************************************************************************
+ * SKIP IMAGE Configuration
+ *****************************************************************************
+ */
+#if PLAT_RECOVERY_IMAGE_ENABLE
+struct skip_image skip_im = {
+	.detection_method = GPIO,
+	.info.gpio.num = 33,
+	.info.gpio.button_state = HIGH,
+	.info.test.cp_ap = CP,
+	.info.test.cp_index = 0,
+};
+
+void *plat_marvell_get_skip_image_data(void)
+{
+	/* Return the skip_image configurations */
+	return &skip_im;
+}
+#endif
+#endif
diff --git a/plat/marvell/a8k/a70x0/mvebu_def.h b/plat/marvell/a8k/a70x0/mvebu_def.h
new file mode 100644
index 00000000..a7c5abbb
--- /dev/null
+++ b/plat/marvell/a8k/a70x0/mvebu_def.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MVEBU_DEF_H__
+#define __MVEBU_DEF_H__
+
+#include <a8k_plat_def.h>
+
+#define CP_COUNT		1	/* A70x0 has single CP0 */
+
+#endif /* __MVEBU_DEF_H__ */
diff --git a/plat/marvell/a8k/a70x0/platform.mk b/plat/marvell/a8k/a70x0/platform.mk
new file mode 100644
index 00000000..29dfd953
--- /dev/null
+++ b/plat/marvell/a8k/a70x0/platform.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:     BSD-3-Clause
+# https://spdx.org/licenses
+#
+
+PCI_EP_SUPPORT		:= 0
+
+DOIMAGE_SEC     	:=	tools/doimage/secure/sec_img_7K.cfg
+
+MARVELL_MOCHI_DRV	:=	drivers/marvell/mochi/apn806_setup.c
+
+include plat/marvell/a8k/common/a8k_common.mk
+
+include plat/marvell/common/marvell_common.mk
diff --git a/plat/marvell/a8k/a70x0_amc/board/dram_port.c b/plat/marvell/a8k/a70x0_amc/board/dram_port.c
new file mode 100644
index 00000000..ab1df465
--- /dev/null
+++ b/plat/marvell/a8k/a70x0_amc/board/dram_port.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch_helpers.h>
+#include <debug.h>
+#include <mv_ddr_if.h>
+#include <plat_marvell.h>
+
+/*
+ * This function may modify the default DRAM parameters
+ * based on information received from SPD or bootloader
+ * configuration located on non volatile storage
+ */
+void plat_marvell_dram_update_topology(void)
+{
+}
+
+/*
+ * This struct provides the DRAM training code with
+ * the appropriate board DRAM configuration
+ */
+static struct mv_ddr_topology_map board_topology_map = {
+/* FIXME: MISL board 2CS 8Gb x8 devices of micron - 2133P */
+	DEBUG_LEVEL_ERROR,
+	0x1, /* active interfaces */
+	/* cs_mask, mirror, dqs_swap, ck_swap X subphys */
+	{ { { {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0},
+	      {0x3, 0x2, 0, 0} },
+	   SPEED_BIN_DDR_2400T,		/* speed_bin */
+	   MV_DDR_DEV_WIDTH_8BIT,	/* sdram device width */
+	   MV_DDR_DIE_CAP_8GBIT,	/* die capacity */
+	   MV_DDR_FREQ_SAR,		/* frequency */
+	   0, 0,			/* cas_l, cas_wl */
+	   MV_DDR_TEMP_LOW} },		/* temperature */
+	MV_DDR_32BIT_ECC_PUP8_BUS_MASK,	/* subphys mask */
+	MV_DDR_CFG_DEFAULT,		/* ddr configuration data source */
+	{ {0} },			/* raw spd data */
+	{0},				/* timing parameters */
+	{				/* electrical configuration */
+		{			/* memory electrical configuration */
+			MV_DDR_RTT_NOM_PARK_RZQ_DISABLE,	/* rtt_nom */
+			{
+				MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */
+				MV_DDR_RTT_NOM_PARK_RZQ_DIV1  /* rtt_park 2cs */
+			},
+			{
+				MV_DDR_RTT_WR_DYN_ODT_OFF,	/* rtt_wr 1cs */
+				MV_DDR_RTT_WR_RZQ_DIV2		/* rtt_wr 2cs */
+			},
+			MV_DDR_DIC_RZQ_DIV7	/* dic */
+		},
+		{			/* phy electrical configuration */
+			MV_DDR_OHM_30,	/* data_drv_p */
+			MV_DDR_OHM_30,	/* data_drv_n */
+			MV_DDR_OHM_30,	/* ctrl_drv_p */
+			MV_DDR_OHM_30,	/* ctrl_drv_n */
+			{
+				MV_DDR_OHM_60,	/* odt_p 1cs */
+				MV_DDR_OHM_120	/* odt_p 2cs */
+			},
+			{
+				MV_DDR_OHM_60,	/* odt_n 1cs */
+				MV_DDR_OHM_120	/* odt_n 2cs */
+			},
+		},
+		{			/* mac electrical configuration */
+			MV_DDR_ODT_CFG_NORMAL,		/* odtcfg_pattern */
+			MV_DDR_ODT_CFG_ALWAYS_ON,	/* odtcfg_write */
+			MV_DDR_ODT_CFG_NORMAL,		/* odtcfg_read */
+		},
+	}
+};
+
+struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
+{
+	/* Return the board topology as defined in the board code */
+	return &board_topology_map;
+}
diff --git a/plat/marvell/a8k/a70x0_amc/board/marvell_plat_config.c b/plat/marvell/a8k/a70x0_amc/board/marvell_plat_config.c
new file mode 100644
index 00000000..ec4124c1
--- /dev/null
+++ b/plat/marvell/a8k/a70x0_amc/board/marvell_plat_config.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <a8k_common.h>
+
+/*
+ * If bootrom is currently at BLE there's no need to include the memory
+ * maps structure at this point
+ */
+#include <mvebu_def.h>
+#ifndef IMAGE_BLE
+
+/*****************************************************************************
+ * AMB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win *amb_memory_map;
+
+int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size,
+			       uintptr_t base)
+{
+	*win = amb_memory_map;
+	if (*win == NULL)
+		*size = 0;
+	else
+		*size = ARRAY_SIZE(amb_memory_map);
+
+	return 0;
+}
+#endif
+
+/*****************************************************************************
+ * IO WIN Configuration
+ *****************************************************************************
+ */
+struct addr_map_win io_win_memory_map[] = {
+#ifndef IMAGE_BLE
+	/* MCI 0 indirect window */
+	{MVEBU_MCI_REG_BASE_REMAP(0),	0x100000,	MCI_0_TID},
+	/* MCI 1 indirect window */
+	{MVEBU_MCI_REG_BASE_REMAP(1),	0x100000,	MCI_1_TID},
+#endif
+};
+
+uint32_t marvell_get_io_win_gcr_target(int ap_index)
+{
+	return PIDI_TID;
+}
+
+int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
+				  uint32_t *size)
+{
+	*win = io_win_memory_map;
+	if (*win == NULL)
+		*size = 0;
+	else
+		*size = ARRAY_SIZE(io_win_memory_map);
+
+	return 0;
+}
+
+#ifndef IMAGE_BLE
+/*****************************************************************************
+ * IOB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win iob_memory_map[] = {
+	/* PEX0_X4 window */
+	{0x00000000f6000000,	0x6000000,	PEX0_TID},
+	{0x00000000c0000000,    0x30000000,     PEX0_TID},
+	{0x0000000800000000,    0x200000000,    PEX0_TID},
+};
+
+int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
+			       uintptr_t base)
+{
+	*win = iob_memory_map;
+	*size = ARRAY_SIZE(iob_memory_map);
+
+	return 0;
+}
+#endif
+
+/*****************************************************************************
+ * CCU Configuration
+ *****************************************************************************
+ */
+struct addr_map_win ccu_memory_map[] = {
+#ifdef IMAGE_BLE
+	{0x00000000f2000000,	0x4000000,	IO_0_TID}, /* IO window */
+#else
+	{0x00000000f2000000,	0xe000000,	IO_0_TID},
+	{0x00000000c0000000,    0x30000000,	IO_0_TID}, /* IO window */
+	{0x0000000800000000,    0x200000000,	IO_0_TID}, /* IO window */
+#endif
+};
+
+uint32_t marvell_get_ccu_gcr_target(int ap)
+{
+	return DRAM_0_TID;
+}
+
+int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win,
+			       uint32_t *size)
+{
+	*win = ccu_memory_map;
+	*size = ARRAY_SIZE(ccu_memory_map);
+
+	return 0;
+}
+
+#ifdef IMAGE_BLE
+
+struct pci_hw_cfg *plat_get_pcie_hw_data(void)
+{
+	return NULL;
+}
+
+/*****************************************************************************
+ * SKIP IMAGE Configuration
+ *****************************************************************************
+ */
+#if PLAT_RECOVERY_IMAGE_ENABLE
+struct skip_image skip_im = {
+	.detection_method = GPIO,
+	.info.gpio.num = 33,
+	.info.gpio.button_state = HIGH,
+	.info.test.cp_ap = CP,
+	.info.test.cp_index = 0,
+};
+
+void *plat_marvell_get_skip_image_data(void)
+{
+	/* Return the skip_image configurations */
+	return &skip_im;
+}
+#endif
+#endif
diff --git a/plat/marvell/a8k/a70x0_amc/mvebu_def.h b/plat/marvell/a8k/a70x0_amc/mvebu_def.h
new file mode 100644
index 00000000..5c665528
--- /dev/null
+++ b/plat/marvell/a8k/a70x0_amc/mvebu_def.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MVEBU_DEF_H__
+#define __MVEBU_DEF_H__
+
+#include <a8k_plat_def.h>
+
+#define CP_COUNT		1	/* A70x0 has single CP0 */
+
+/***********************************************************************
+ * Required platform porting definitions common to all
+ * Management Compute SubSystems (MSS)
+ ***********************************************************************
+ */
+/*
+ * Load address of SCP_BL2
+ * SCP_BL2 is loaded to the same place as BL31.
+ * Once SCP_BL2 is transferred to the SCP,
+ * it is discarded and BL31 is loaded over the top.
+ */
+#ifdef SCP_IMAGE
+#define SCP_BL2_BASE		BL31_BASE
+#endif
+
+
+#endif /* __MVEBU_DEF_H__ */
diff --git a/plat/marvell/a8k/a70x0_amc/platform.mk b/plat/marvell/a8k/a70x0_amc/platform.mk
new file mode 100644
index 00000000..29dfd953
--- /dev/null
+++ b/plat/marvell/a8k/a70x0_amc/platform.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:     BSD-3-Clause
+# https://spdx.org/licenses
+#
+
+PCI_EP_SUPPORT		:= 0
+
+DOIMAGE_SEC     	:=	tools/doimage/secure/sec_img_7K.cfg
+
+MARVELL_MOCHI_DRV	:=	drivers/marvell/mochi/apn806_setup.c
+
+include plat/marvell/a8k/common/a8k_common.mk
+
+include plat/marvell/common/marvell_common.mk
diff --git a/plat/marvell/a8k/a80x0/board/dram_port.c b/plat/marvell/a8k/a80x0/board/dram_port.c
new file mode 100644
index 00000000..c720c117
--- /dev/null
+++ b/plat/marvell/a8k/a80x0/board/dram_port.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch_helpers.h>
+#include <a8k_i2c.h>
+#include <debug.h>
+#include <mmio.h>
+#include <mv_ddr_if.h>
+#include <mvebu_def.h>
+#include <plat_marvell.h>
+
+#define MVEBU_AP_MPP_CTRL0_7_REG		MVEBU_AP_MPP_REGS(0)
+#define MVEBU_AP_MPP_CTRL4_OFFS			16
+#define MVEBU_AP_MPP_CTRL5_OFFS			20
+#define MVEBU_AP_MPP_CTRL4_I2C0_SDA_ENA		0x3
+#define MVEBU_AP_MPP_CTRL5_I2C0_SCK_ENA		0x3
+
+#define MVEBU_CP_MPP_CTRL37_OFFS		20
+#define MVEBU_CP_MPP_CTRL38_OFFS		24
+#define MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA	0x2
+#define MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA	0x2
+
+#define MVEBU_MPP_CTRL_MASK			0xf
+
+/*
+ * This struct provides the DRAM training code with
+ * the appropriate board DRAM configuration
+ */
+static struct mv_ddr_topology_map board_topology_map = {
+	/* MISL board with 1CS 8Gb x4 devices of Micron 2400T */
+	DEBUG_LEVEL_ERROR,
+	0x1, /* active interfaces */
+	/* cs_mask, mirror, dqs_swap, ck_swap X subphys */
+	{ { { {0x1, 0x0, 0, 0},	/* FIXME: change the cs mask for all 64 bit */
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0} },
+	   /* TODO: double check if the speed bin is 2400T */
+	   SPEED_BIN_DDR_2400T,		/* speed_bin */
+	   MV_DDR_DEV_WIDTH_8BIT,	/* sdram device width */
+	   MV_DDR_DIE_CAP_8GBIT,	/* die capacity */
+	   MV_DDR_FREQ_SAR,		/* frequency */
+	   0, 0,			/* cas_l, cas_wl */
+	   MV_DDR_TEMP_LOW} },		/* temperature */
+	MV_DDR_64BIT_ECC_PUP8_BUS_MASK, /* subphys mask */
+	MV_DDR_CFG_SPD,			/* ddr configuration data source */
+	{ {0} },			/* raw spd data */
+	{0},				/* timing parameters */
+	{				/* electrical configuration */
+		{			/* memory electrical configuration */
+			MV_DDR_RTT_NOM_PARK_RZQ_DISABLE,	/* rtt_nom */
+			{
+				MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */
+				MV_DDR_RTT_NOM_PARK_RZQ_DIV1  /* rtt_park 2cs */
+			},
+			{
+				MV_DDR_RTT_WR_DYN_ODT_OFF,	/* rtt_wr 1cs */
+				MV_DDR_RTT_WR_RZQ_DIV2		/* rtt_wr 2cs */
+			},
+			MV_DDR_DIC_RZQ_DIV7	/* dic */
+		},
+		{			/* phy electrical configuration */
+			MV_DDR_OHM_30,	/* data_drv_p */
+			MV_DDR_OHM_30,	/* data_drv_n */
+			MV_DDR_OHM_30,	/* ctrl_drv_p */
+			MV_DDR_OHM_30,	/* ctrl_drv_n */
+			{
+				MV_DDR_OHM_60,	/* odt_p 1cs */
+				MV_DDR_OHM_120	/* odt_p 2cs */
+			},
+			{
+				MV_DDR_OHM_60,	/* odt_n 1cs */
+				MV_DDR_OHM_120	/* odt_n 2cs */
+			},
+		},
+		{			/* mac electrical configuration */
+			MV_DDR_ODT_CFG_NORMAL,		/* odtcfg_pattern */
+			MV_DDR_ODT_CFG_ALWAYS_ON,	/* odtcfg_write */
+			MV_DDR_ODT_CFG_NORMAL,		/* odtcfg_read */
+		},
+	}
+};
+
+struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
+{
+	/* Return the board topology as defined in the board code */
+	return &board_topology_map;
+}
+
+static void mpp_config(void)
+{
+	uintptr_t reg;
+	uint32_t val;
+
+	reg = MVEBU_CP_MPP_REGS(0, 4);
+	/* configure CP0 MPP 37 and 38 to i2c */
+	val = mmio_read_32(reg);
+	val &= ~((MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL37_OFFS) |
+		(MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL38_OFFS));
+	val |= (MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA <<
+			MVEBU_CP_MPP_CTRL37_OFFS) |
+		(MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA <<
+			MVEBU_CP_MPP_CTRL38_OFFS);
+	mmio_write_32(reg, val);
+}
+
+/*
+ * This function may modify the default DRAM parameters
+ * based on information received from SPD or bootloader
+ * configuration located on non volatile storage
+ */
+void plat_marvell_dram_update_topology(void)
+{
+	struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
+
+	INFO("Gathering DRAM information\n");
+
+	if (tm->cfg_src == MV_DDR_CFG_SPD) {
+		/* configure MPPs to enable i2c */
+		mpp_config();
+
+		/* initialize i2c */
+		i2c_init((void *)MVEBU_CP0_I2C_BASE);
+
+		/* select SPD memory page 0 to access DRAM configuration */
+		i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 1);
+
+		/* read data from spd */
+		i2c_read(I2C_SPD_ADDR, 0x0, 1, tm->spd_data.all_bytes,
+			 sizeof(tm->spd_data.all_bytes));
+	}
+}
diff --git a/plat/marvell/a8k/a80x0/board/marvell_plat_config.c b/plat/marvell/a8k/a80x0/board/marvell_plat_config.c
new file mode 100644
index 00000000..43beffab
--- /dev/null
+++ b/plat/marvell/a8k/a80x0/board/marvell_plat_config.c
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <a8k_common.h>
+/*
+ * If bootrom is currently at BLE there's no need to include the memory
+ * maps structure at this point
+ */
+#include <mvebu_def.h>
+#ifndef IMAGE_BLE
+
+/*****************************************************************************
+ * AMB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win amb_memory_map[] = {
+	/* CP1 SPI1 CS0 Direct Mode access */
+	{0xf900,	0x1000000,	AMB_SPI1_CS0_ID},
+};
+
+int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size,
+			       uintptr_t base)
+{
+	*win = amb_memory_map;
+	if (*win == NULL)
+		*size = 0;
+	else
+		*size = ARRAY_SIZE(amb_memory_map);
+
+	return 0;
+}
+#endif
+
+/*****************************************************************************
+ * IO WIN Configuration
+ *****************************************************************************
+ */
+struct addr_map_win io_win_memory_map[] = {
+	/* CP1 (MCI0) internal regs */
+	{0x00000000f4000000,		0x2000000,  MCI_0_TID},
+#ifndef IMAGE_BLE
+	/* PCIe0 and SPI1_CS0 (RUNIT) on CP1*/
+	{0x00000000f9000000,		0x2000000,  MCI_0_TID},
+	/* PCIe1 on CP1*/
+	{0x00000000fb000000,		0x1000000,  MCI_0_TID},
+	/* PCIe2 on CP1*/
+	{0x00000000fc000000,		0x1000000,  MCI_0_TID},
+	/* MCI 0 indirect window */
+	{MVEBU_MCI_REG_BASE_REMAP(0),	0x100000,  MCI_0_TID},
+	/* MCI 1 indirect window */
+	{MVEBU_MCI_REG_BASE_REMAP(1),	0x100000,  MCI_1_TID},
+#endif
+};
+
+uint32_t marvell_get_io_win_gcr_target(int ap_index)
+{
+	return PIDI_TID;
+}
+
+int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
+				  uint32_t *size)
+{
+	*win = io_win_memory_map;
+	if (*win == NULL)
+		*size = 0;
+	else
+		*size = ARRAY_SIZE(io_win_memory_map);
+
+	return 0;
+}
+
+#ifndef IMAGE_BLE
+/*****************************************************************************
+ * IOB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win iob_memory_map_cp0[] = {
+	/* CP0 */
+	/* PEX1_X1 window */
+	{0x00000000f7000000,	0x1000000,	PEX1_TID},
+	/* PEX2_X1 window */
+	{0x00000000f8000000,	0x1000000,	PEX2_TID},
+	/* PEX0_X4 window */
+	{0x00000000f6000000,	0x1000000,	PEX0_TID}
+};
+
+struct addr_map_win iob_memory_map_cp1[] = {
+	/* CP1 */
+	/* SPI1_CS0 (RUNIT) window */
+	{0x00000000f9000000,	0x1000000,	RUNIT_TID},
+	/* PEX1_X1 window */
+	{0x00000000fb000000,	0x1000000,	PEX1_TID},
+	/* PEX2_X1 window */
+	{0x00000000fc000000,	0x1000000,	PEX2_TID},
+	/* PEX0_X4 window */
+	{0x00000000fa000000,	0x1000000,	PEX0_TID}
+};
+
+int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
+			       uintptr_t base)
+{
+	switch (base) {
+	case MVEBU_CP_REGS_BASE(0):
+		*win = iob_memory_map_cp0;
+		*size = ARRAY_SIZE(iob_memory_map_cp0);
+		return 0;
+	case MVEBU_CP_REGS_BASE(1):
+		*win = iob_memory_map_cp1;
+		*size = ARRAY_SIZE(iob_memory_map_cp1);
+		return 0;
+	default:
+		*size = 0;
+		*win = 0;
+		return 1;
+	}
+}
+#endif
+
+/*****************************************************************************
+ * CCU Configuration
+ *****************************************************************************
+ */
+struct addr_map_win ccu_memory_map[] = {
+#ifdef IMAGE_BLE
+	{0x00000000f2000000,	0x4000000,  IO_0_TID}, /* IO window */
+#else
+	{0x00000000f2000000,	0xe000000,  IO_0_TID}, /* IO window */
+#endif
+};
+
+uint32_t marvell_get_ccu_gcr_target(int ap)
+{
+	return DRAM_0_TID;
+}
+
+int marvell_get_ccu_memory_map(int ap, struct addr_map_win **win,
+			       uint32_t *size)
+{
+	*win = ccu_memory_map;
+	*size = ARRAY_SIZE(ccu_memory_map);
+
+	return 0;
+}
+
+#ifndef IMAGE_BLE
+/*****************************************************************************
+ * SoC PM configuration
+ *****************************************************************************
+ */
+/* CP GPIO should be used and the GPIOs should be within same GPIO register */
+struct power_off_method pm_cfg = {
+	.type = PMIC_GPIO,
+	.cfg.gpio.pin_count = 1,
+	.cfg.gpio.info = {{0, 35} },
+	.cfg.gpio.step_count = 7,
+	.cfg.gpio.seq = {1, 0, 1, 0, 1, 0, 1},
+	.cfg.gpio.delay_ms = 10,
+};
+
+void *plat_marvell_get_pm_cfg(void)
+{
+	/* Return the PM configurations */
+	return &pm_cfg;
+}
+
+/* In reference to #ifndef IMAGE_BLE, this part is used for BLE only. */
+#else
+/*****************************************************************************
+ * SKIP IMAGE Configuration
+ *****************************************************************************
+ */
+#if PLAT_RECOVERY_IMAGE_ENABLE
+struct skip_image skip_im = {
+	.detection_method = GPIO,
+	.info.gpio.num = 33,
+	.info.gpio.button_state = HIGH,
+	.info.test.cp_ap = CP,
+	.info.test.cp_index = 0,
+};
+
+void *plat_marvell_get_skip_image_data(void)
+{
+	/* Return the skip_image configurations */
+	return &skip_im;
+}
+#endif
+#endif
diff --git a/plat/marvell/a8k/a80x0/mvebu_def.h b/plat/marvell/a8k/a80x0/mvebu_def.h
new file mode 100644
index 00000000..5bff12ce
--- /dev/null
+++ b/plat/marvell/a8k/a80x0/mvebu_def.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MVEBU_DEF_H__
+#define __MVEBU_DEF_H__
+
+#include <a8k_plat_def.h>
+
+#define CP_COUNT		2	/* A80x0 has both CP0 & CP1 */
+#define I2C_SPD_ADDR		0x53	/* Access SPD data */
+#define I2C_SPD_P0_ADDR		0x36	/* Select SPD data page 0 */
+
+#endif /* __MVEBU_DEF_H__ */
diff --git a/plat/marvell/a8k/a80x0/platform.mk b/plat/marvell/a8k/a80x0/platform.mk
new file mode 100644
index 00000000..0fe235b6
--- /dev/null
+++ b/plat/marvell/a8k/a80x0/platform.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:     BSD-3-Clause
+# https://spdx.org/licenses
+#
+
+PCI_EP_SUPPORT		:= 0
+
+DOIMAGE_SEC     	:=	tools/doimage/secure/sec_img_8K.cfg
+
+MARVELL_MOCHI_DRV	:=	drivers/marvell/mochi/apn806_setup.c
+
+include plat/marvell/a8k/common/a8k_common.mk
+
+include plat/marvell/common/marvell_common.mk
diff --git a/plat/marvell/a8k/a80x0_mcbin/board/dram_port.c b/plat/marvell/a8k/a80x0_mcbin/board/dram_port.c
new file mode 100644
index 00000000..b455b837
--- /dev/null
+++ b/plat/marvell/a8k/a80x0_mcbin/board/dram_port.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch_helpers.h>
+#include <a8k_i2c.h>
+#include <debug.h>
+#include <mmio.h>
+#include <mv_ddr_if.h>
+#include <mvebu_def.h>
+#include <plat_marvell.h>
+
+#define MVEBU_CP_MPP_CTRL37_OFFS		20
+#define MVEBU_CP_MPP_CTRL38_OFFS		24
+#define MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA	0x2
+#define MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA	0x2
+
+#define MVEBU_MPP_CTRL_MASK			0xf
+
+/*
+ * This struct provides the DRAM training code with
+ * the appropriate board DRAM configuration
+ */
+static struct mv_ddr_topology_map board_topology_map = {
+	/* Board with 1CS 8Gb x4 devices of Micron 2400T */
+	DEBUG_LEVEL_ERROR,
+	0x1, /* active interfaces */
+	/* cs_mask, mirror, dqs_swap, ck_swap X subphys */
+	{ { { {0x1, 0x0, 0, 0},	/* FIXME: change the cs mask for all 64 bit */
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0},
+	      {0x1, 0x0, 0, 0} },
+	   /* TODO: double check if the speed bin is 2400T */
+	   SPEED_BIN_DDR_2400T,		/* speed_bin */
+	   MV_DDR_DEV_WIDTH_8BIT,	/* sdram device width */
+	   MV_DDR_DIE_CAP_8GBIT,	/* die capacity */
+	   MV_DDR_FREQ_SAR,		/* frequency */
+	   0, 0,			/* cas_l, cas_wl */
+	   MV_DDR_TEMP_LOW} },		/* temperature */
+	   MV_DDR_64BIT_BUS_MASK,	/* subphys mask */
+	   MV_DDR_CFG_SPD,		/* ddr configuration data source */
+	{ {0} },			/* raw spd data */
+	{0},				/* timing parameters */
+	{				/* electrical configuration */
+		{			/* memory electrical configuration */
+			MV_DDR_RTT_NOM_PARK_RZQ_DISABLE,	/* rtt_nom */
+			{
+				MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */
+				MV_DDR_RTT_NOM_PARK_RZQ_DIV1  /* rtt_park 2cs */
+			},
+			{
+				MV_DDR_RTT_WR_DYN_ODT_OFF,	/* rtt_wr 1cs */
+				MV_DDR_RTT_WR_RZQ_DIV2		/* rtt_wr 2cs */
+			},
+			MV_DDR_DIC_RZQ_DIV7	/* dic */
+		},
+		{			/* phy electrical configuration */
+			MV_DDR_OHM_30,	/* data_drv_p */
+			MV_DDR_OHM_30,	/* data_drv_n */
+			MV_DDR_OHM_30,	/* ctrl_drv_p */
+			MV_DDR_OHM_30,	/* ctrl_drv_n */
+			{
+				MV_DDR_OHM_60,	/* odt_p 1cs */
+				MV_DDR_OHM_120	/* odt_p 2cs */
+			},
+			{
+				MV_DDR_OHM_60,	/* odt_n 1cs */
+				MV_DDR_OHM_120	/* odt_n 2cs */
+			},
+		},
+		{			/* mac electrical configuration */
+			MV_DDR_ODT_CFG_NORMAL,		/* odtcfg_pattern */
+			MV_DDR_ODT_CFG_ALWAYS_ON,	/* odtcfg_write */
+			MV_DDR_ODT_CFG_NORMAL,		/* odtcfg_read */
+		},
+	}
+};
+
+struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
+{
+	/* Return the board topology as defined in the board code */
+	return &board_topology_map;
+}
+
+static void mpp_config(void)
+{
+	uint32_t val;
+	uintptr_t reg = MVEBU_CP_MPP_REGS(0, 4);
+
+	/* configure CP0 MPP 37 and 38 to i2c */
+	val = mmio_read_32(reg);
+	val &= ~((MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL37_OFFS) |
+		(MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL38_OFFS));
+	val |= (MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA << MVEBU_CP_MPP_CTRL37_OFFS) |
+		(MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA << MVEBU_CP_MPP_CTRL38_OFFS);
+	mmio_write_32(reg, val);
+}
+
+/*
+ * This function may modify the default DRAM parameters
+ * based on information received from SPD or bootloader
+ * configuration located on non volatile storage
+ */
+void plat_marvell_dram_update_topology(void)
+{
+	struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
+
+	INFO("Gathering DRAM information\n");
+
+	if (tm->cfg_src == MV_DDR_CFG_SPD) {
+		/* configure MPPs to enable i2c */
+		mpp_config();
+		/* initialize the i2c */
+		i2c_init((void *)MVEBU_CP0_I2C_BASE);
+		/* select SPD memory page 0 to access DRAM configuration */
+		i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 1);
+		/* read data from spd */
+		i2c_read(I2C_SPD_ADDR, 0x0, 1, tm->spd_data.all_bytes,
+			 sizeof(tm->spd_data.all_bytes));
+	}
+}
diff --git a/plat/marvell/a8k/a80x0_mcbin/board/marvell_plat_config.c b/plat/marvell/a8k/a80x0_mcbin/board/marvell_plat_config.c
new file mode 100644
index 00000000..079bd8fe
--- /dev/null
+++ b/plat/marvell/a8k/a80x0_mcbin/board/marvell_plat_config.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <a8k_common.h>
+#include <delay_timer.h>
+#include <mmio.h>
+/*
+ * If bootrom is currently at BLE there's no need to include the memory
+ * maps structure at this point
+ */
+#include <mvebu_def.h>
+#ifndef IMAGE_BLE
+
+/*****************************************************************************
+ * GPIO Configuration
+ *****************************************************************************
+ */
+#define MPP_CONTROL_REGISTER		0xf2440018
+#define MPP_CONTROL_MPP_SEL_52_MASK	0xf0000
+#define GPIO_DATA_OUT1_REGISTER		0xf2440140
+#define GPIO_DATA_OUT_EN_CTRL1_REGISTER 0xf2440144
+#define GPIO52_MASK			0x100000
+
+/* Reset PCIe via GPIO number 52 */
+int marvell_gpio_config(void)
+{
+	uint32_t reg;
+
+	reg = mmio_read_32(MPP_CONTROL_REGISTER);
+	reg |= MPP_CONTROL_MPP_SEL_52_MASK;
+	mmio_write_32(MPP_CONTROL_REGISTER, reg);
+
+	reg = mmio_read_32(GPIO_DATA_OUT1_REGISTER);
+	reg |= GPIO52_MASK;
+	mmio_write_32(GPIO_DATA_OUT1_REGISTER, reg);
+
+	reg = mmio_read_32(GPIO_DATA_OUT_EN_CTRL1_REGISTER);
+	reg &= ~GPIO52_MASK;
+	mmio_write_32(GPIO_DATA_OUT_EN_CTRL1_REGISTER, reg);
+	udelay(100);
+
+	return 0;
+}
+
+/*****************************************************************************
+ * AMB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win amb_memory_map[] = {
+	/* CP1 SPI1 CS0 Direct Mode access */
+	{0xf900,	0x1000000,	AMB_SPI1_CS0_ID},
+};
+
+int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size,
+			       uintptr_t base)
+{
+	*win = amb_memory_map;
+	if (*win == NULL)
+		*size = 0;
+	else
+		*size = ARRAY_SIZE(amb_memory_map);
+
+	return 0;
+}
+#endif
+
+/*****************************************************************************
+ * IO WIN Configuration
+ *****************************************************************************
+ */
+struct addr_map_win io_win_memory_map[] = {
+	/* CP1 (MCI0) internal regs */
+	{0x00000000f4000000,		0x2000000,  MCI_0_TID},
+#ifndef IMAGE_BLE
+	/* PCIe0 and SPI1_CS0 (RUNIT) on CP1*/
+	{0x00000000f9000000,		0x2000000,  MCI_0_TID},
+	/* PCIe1 on CP1*/
+	{0x00000000fb000000,		0x1000000,  MCI_0_TID},
+	/* PCIe2 on CP1*/
+	{0x00000000fc000000,		0x1000000,  MCI_0_TID},
+	/* MCI 0 indirect window */
+	{MVEBU_MCI_REG_BASE_REMAP(0),	0x100000,   MCI_0_TID},
+	/* MCI 1 indirect window */
+	{MVEBU_MCI_REG_BASE_REMAP(1),	0x100000,   MCI_1_TID},
+#endif
+};
+
+uint32_t marvell_get_io_win_gcr_target(int ap_index)
+{
+	return PIDI_TID;
+}
+
+int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
+				  uint32_t *size)
+{
+	*win = io_win_memory_map;
+	if (*win == NULL)
+		*size = 0;
+	else
+		*size = ARRAY_SIZE(io_win_memory_map);
+
+	return 0;
+}
+
+#ifndef IMAGE_BLE
+/*****************************************************************************
+ * IOB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win iob_memory_map_cp0[] = {
+	/* CP0 */
+	/* PEX1_X1 window */
+	{0x00000000f7000000,	0x1000000,	PEX1_TID},
+	/* PEX2_X1 window */
+	{0x00000000f8000000,	0x1000000,	PEX2_TID},
+	/* PEX0_X4 window */
+	{0x00000000f6000000,	0x1000000,	PEX0_TID},
+	{0x00000000c0000000,	0x30000000,	PEX0_TID},
+	{0x0000000800000000,	0x100000000,	PEX0_TID},
+};
+
+struct addr_map_win iob_memory_map_cp1[] = {
+	/* CP1 */
+	/* SPI1_CS0 (RUNIT) window */
+	{0x00000000f9000000,	0x1000000,	RUNIT_TID},
+	/* PEX1_X1 window */
+	{0x00000000fb000000,	0x1000000,	PEX1_TID},
+	/* PEX2_X1 window */
+	{0x00000000fc000000,	0x1000000,	PEX2_TID},
+	/* PEX0_X4 window */
+	{0x00000000fa000000,	0x1000000,	PEX0_TID}
+};
+
+int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
+			       uintptr_t base)
+{
+	switch (base) {
+	case MVEBU_CP_REGS_BASE(0):
+		*win = iob_memory_map_cp0;
+		*size = ARRAY_SIZE(iob_memory_map_cp0);
+		return 0;
+	case MVEBU_CP_REGS_BASE(1):
+		*win = iob_memory_map_cp1;
+		*size = ARRAY_SIZE(iob_memory_map_cp1);
+		return 0;
+	default:
+		*size = 0;
+		*win = 0;
+		return 1;
+	}
+}
+#endif
+
+/*****************************************************************************
+ * CCU Configuration
+ *****************************************************************************
+ */
+struct addr_map_win ccu_memory_map[] = {
+#ifdef IMAGE_BLE
+	{0x00000000f2000000,	0x4000000,  IO_0_TID}, /* IO window */
+#else
+	{0x00000000f2000000,	0xe000000,  IO_0_TID}, /* IO window */
+	{0x00000000c0000000,	0x30000000,  IO_0_TID}, /* IO window */
+	{0x0000000800000000,	0x100000000,  IO_0_TID}, /* IO window */
+#endif
+};
+
+uint32_t marvell_get_ccu_gcr_target(int ap)
+{
+	return DRAM_0_TID;
+}
+
+int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win,
+			       uint32_t *size)
+{
+	*win = ccu_memory_map;
+	*size = ARRAY_SIZE(ccu_memory_map);
+
+	return 0;
+}
+
+/* In reference to #ifndef IMAGE_BLE, this part is used for BLE only. */
+
+/*****************************************************************************
+ * SKIP IMAGE Configuration
+ *****************************************************************************
+ */
+void *plat_marvell_get_skip_image_data(void)
+{
+	/* No recovery button on A8k-MCBIN board */
+	return NULL;
+}
diff --git a/plat/marvell/a8k/a80x0_mcbin/mvebu_def.h b/plat/marvell/a8k/a80x0_mcbin/mvebu_def.h
new file mode 100644
index 00000000..5bff12ce
--- /dev/null
+++ b/plat/marvell/a8k/a80x0_mcbin/mvebu_def.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MVEBU_DEF_H__
+#define __MVEBU_DEF_H__
+
+#include <a8k_plat_def.h>
+
+#define CP_COUNT		2	/* A80x0 has both CP0 & CP1 */
+#define I2C_SPD_ADDR		0x53	/* Access SPD data */
+#define I2C_SPD_P0_ADDR		0x36	/* Select SPD data page 0 */
+
+#endif /* __MVEBU_DEF_H__ */
diff --git a/plat/marvell/a8k/a80x0_mcbin/platform.mk b/plat/marvell/a8k/a80x0_mcbin/platform.mk
new file mode 100644
index 00000000..0fe235b6
--- /dev/null
+++ b/plat/marvell/a8k/a80x0_mcbin/platform.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:     BSD-3-Clause
+# https://spdx.org/licenses
+#
+
+PCI_EP_SUPPORT		:= 0
+
+DOIMAGE_SEC     	:=	tools/doimage/secure/sec_img_8K.cfg
+
+MARVELL_MOCHI_DRV	:=	drivers/marvell/mochi/apn806_setup.c
+
+include plat/marvell/a8k/common/a8k_common.mk
+
+include plat/marvell/common/marvell_common.mk
diff --git a/plat/marvell/a8k/common/a8k_common.mk b/plat/marvell/a8k/common/a8k_common.mk
new file mode 100644
index 00000000..3bcce96b
--- /dev/null
+++ b/plat/marvell/a8k/common/a8k_common.mk
@@ -0,0 +1,122 @@
+#
+# Copyright (C) 2016 - 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:     BSD-3-Clause
+# https://spdx.org/licenses
+
+include tools/doimage/doimage.mk
+
+PLAT_FAMILY		:= a8k
+PLAT_FAMILY_BASE	:= plat/marvell/$(PLAT_FAMILY)
+PLAT_INCLUDE_BASE	:= include/plat/marvell/$(PLAT_FAMILY)
+PLAT_COMMON_BASE	:= $(PLAT_FAMILY_BASE)/common
+MARVELL_DRV_BASE	:= drivers/marvell
+MARVELL_COMMON_BASE	:= plat/marvell/common
+
+ERRATA_A72_859971	:= 1
+
+# Enable MSS support for a8k family
+MSS_SUPPORT		:= 1
+
+# Disable EL3 cache for power management
+BL31_CACHE_DISABLE	:= 1
+$(eval $(call add_define,BL31_CACHE_DISABLE))
+
+$(eval $(call add_define,PCI_EP_SUPPORT))
+$(eval $(call assert_boolean,PCI_EP_SUPPORT))
+
+DOIMAGEPATH		?=	tools/doimage
+DOIMAGETOOL		?=	${DOIMAGEPATH}/doimage
+
+ROM_BIN_EXT ?= $(BUILD_PLAT)/ble.bin
+DOIMAGE_FLAGS	+= -b $(ROM_BIN_EXT) $(NAND_DOIMAGE_FLAGS) $(DOIMAGE_SEC_FLAGS)
+
+# This define specifies DDR type for BLE
+$(eval $(call add_define,CONFIG_DDR4))
+
+MARVELL_GIC_SOURCES	:=	drivers/arm/gic/common/gic_common.c	\
+				drivers/arm/gic/v2/gicv2_main.c		\
+				drivers/arm/gic/v2/gicv2_helpers.c	\
+				plat/common/plat_gicv2.c
+
+ATF_INCLUDES		:=	-Iinclude/common/tbbr
+
+PLAT_INCLUDES		:=	-I$(PLAT_FAMILY_BASE)/$(PLAT)		\
+				-I$(PLAT_COMMON_BASE)/include		\
+				-I$(PLAT_INCLUDE_BASE)/common		\
+				-Iinclude/drivers/marvell		\
+				-Iinclude/drivers/marvell/mochi		\
+				$(ATF_INCLUDES)
+
+PLAT_BL_COMMON_SOURCES	:=	$(PLAT_COMMON_BASE)/aarch64/a8k_common.c \
+				drivers/console/aarch64/console.S	 \
+				drivers/ti/uart/aarch64/16550_console.S
+
+BLE_PORTING_SOURCES	:=	$(PLAT_FAMILY_BASE)/$(PLAT)/board/dram_port.c \
+				$(PLAT_FAMILY_BASE)/$(PLAT)/board/marvell_plat_config.c
+
+MARVELL_MOCHI_DRV	+=	$(MARVELL_DRV_BASE)/mochi/cp110_setup.c
+
+BLE_SOURCES		:=	$(PLAT_COMMON_BASE)/plat_ble_setup.c		\
+				$(MARVELL_MOCHI_DRV)			       \
+				$(MARVELL_DRV_BASE)/i2c/a8k_i2c.c	 	\
+				$(PLAT_COMMON_BASE)/plat_pm.c		 	\
+				$(MARVELL_DRV_BASE)/thermal.c			\
+				$(PLAT_COMMON_BASE)/plat_thermal.c		\
+				$(BLE_PORTING_SOURCES)				\
+				$(MARVELL_DRV_BASE)/ccu.c			\
+				$(MARVELL_DRV_BASE)/io_win.c
+
+BL1_SOURCES		+=	$(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \
+				lib/cpus/aarch64/cortex_a72.S
+
+MARVELL_DRV		:= 	$(MARVELL_DRV_BASE)/io_win.c	\
+				$(MARVELL_DRV_BASE)/iob.c	\
+				$(MARVELL_DRV_BASE)/mci.c	\
+				$(MARVELL_DRV_BASE)/amb_adec.c	\
+				$(MARVELL_DRV_BASE)/ccu.c	\
+				$(MARVELL_DRV_BASE)/cache_llc.c	\
+				$(MARVELL_DRV_BASE)/comphy/phy-comphy-cp110.c
+
+BL31_PORTING_SOURCES	:=	$(PLAT_FAMILY_BASE)/$(PLAT)/board/marvell_plat_config.c
+
+BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a72.S		       \
+				$(PLAT_COMMON_BASE)/aarch64/plat_helpers.S     \
+				$(PLAT_COMMON_BASE)/aarch64/plat_arch_config.c \
+				$(PLAT_COMMON_BASE)/plat_pm.c		       \
+				$(PLAT_COMMON_BASE)/plat_bl31_setup.c	       \
+				$(MARVELL_COMMON_BASE)/marvell_gicv2.c	       \
+				$(MARVELL_COMMON_BASE)/mrvl_sip_svc.c	       \
+				$(MARVELL_COMMON_BASE)/marvell_ddr_info.c      \
+				$(BL31_PORTING_SOURCES)			       \
+				$(MARVELL_DRV)				       \
+				$(MARVELL_MOCHI_DRV)			       \
+				$(MARVELL_GIC_SOURCES)
+
+# Add trace functionality for PM
+BL31_SOURCES		+=	$(PLAT_COMMON_BASE)/plat_pm_trace.c
+
+# Disable the PSCI platform compatibility layer (allows porting
+# from Old Platform APIs to the new APIs).
+# It is not needed since Marvell platform already used the new platform APIs.
+ENABLE_PLAT_COMPAT	:= 	0
+
+# Force builds with BL2 image on a80x0 platforms
+ifndef SCP_BL2
+ $(error "Error: SCP_BL2 image is mandatory for a8k family")
+endif
+
+# MSS (SCP) build
+include $(PLAT_COMMON_BASE)/mss/mss_a8k.mk
+
+# BLE (ROM context execution code, AKA binary extension)
+BLE_PATH	?=  ble
+
+include ${BLE_PATH}/ble.mk
+$(eval $(call MAKE_BL,e))
+
+mrvl_flash: ${BUILD_PLAT}/${FIP_NAME} ${DOIMAGETOOL} ${BUILD_PLAT}/ble.bin
+	$(shell truncate -s %128K ${BUILD_PLAT}/bl1.bin)
+	$(shell cat ${BUILD_PLAT}/bl1.bin ${BUILD_PLAT}/${FIP_NAME} > ${BUILD_PLAT}/${BOOT_IMAGE})
+	${DOIMAGETOOL} ${DOIMAGE_FLAGS} ${BUILD_PLAT}/${BOOT_IMAGE} ${BUILD_PLAT}/${FLASH_IMAGE}
+
diff --git a/plat/marvell/a8k/common/aarch64/a8k_common.c b/plat/marvell/a8k/common/aarch64/a8k_common.c
new file mode 100644
index 00000000..7c2bf318
--- /dev/null
+++ b/plat/marvell/a8k/common/aarch64/a8k_common.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <plat_marvell.h>
+
+
+/* MMU entry for internal (register) space access */
+#define MAP_DEVICE0	MAP_REGION_FLAT(DEVICE0_BASE,			\
+					DEVICE0_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+/*
+ * Table of regions for various BL stages to map using the MMU.
+ */
+#if IMAGE_BL1
+const mmap_region_t plat_marvell_mmap[] = {
+	MARVELL_MAP_SHARED_RAM,
+	MAP_DEVICE0,
+	{0}
+};
+#endif
+#if IMAGE_BL2
+const mmap_region_t plat_marvell_mmap[] = {
+	MARVELL_MAP_SHARED_RAM,
+	MAP_DEVICE0,
+	MARVELL_MAP_DRAM,
+	{0}
+};
+#endif
+
+#if IMAGE_BL2U
+const mmap_region_t plat_marvell_mmap[] = {
+	MAP_DEVICE0,
+	{0}
+};
+#endif
+
+#if IMAGE_BLE
+const mmap_region_t plat_marvell_mmap[] = {
+	MAP_DEVICE0,
+	{0}
+};
+#endif
+
+#if IMAGE_BL31
+const mmap_region_t plat_marvell_mmap[] = {
+	MARVELL_MAP_SHARED_RAM,
+	MAP_DEVICE0,
+	MARVELL_MAP_DRAM,
+	{0}
+};
+#endif
+#if IMAGE_BL32
+const mmap_region_t plat_marvell_mmap[] = {
+	MAP_DEVICE0,
+	{0}
+};
+#endif
+
+MARVELL_CASSERT_MMAP;
diff --git a/plat/marvell/a8k/common/aarch64/plat_arch_config.c b/plat/marvell/a8k/common/aarch64/plat_arch_config.c
new file mode 100644
index 00000000..86673314
--- /dev/null
+++ b/plat/marvell/a8k/common/aarch64/plat_arch_config.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <platform.h>
+#include <arch_helpers.h>
+#include <mmio.h>
+#include <debug.h>
+#include <cache_llc.h>
+
+
+#define CCU_HTC_ASET			(MVEBU_CCU_BASE(MVEBU_AP0) + 0x264)
+#define MVEBU_IO_AFFINITY		(0xF00)
+
+
+static void plat_enable_affinity(void)
+{
+	int cluster_id;
+	int affinity;
+
+	/* set CPU Affinity */
+	cluster_id = plat_my_core_pos() / PLAT_MARVELL_CLUSTER_CORE_COUNT;
+	affinity = (MVEBU_IO_AFFINITY | (1 << cluster_id));
+	mmio_write_32(CCU_HTC_ASET, affinity);
+
+	/* set barier */
+	isb();
+}
+
+void marvell_psci_arch_init(int die_index)
+{
+#if LLC_ENABLE
+	/* check if LLC is in exclusive mode
+	 * as L2 is configured to UniqueClean eviction
+	 * (in a8k reset handler)
+	 */
+	if (llc_is_exclusive(0) == 0)
+		ERROR("LLC should be configured to exclusice mode\n");
+#endif
+
+	/* Enable Affinity */
+	plat_enable_affinity();
+}
diff --git a/plat/marvell/a8k/common/aarch64/plat_helpers.S b/plat/marvell/a8k/common/aarch64/plat_helpers.S
new file mode 100644
index 00000000..fadc4c26
--- /dev/null
+++ b/plat/marvell/a8k/common/aarch64/plat_helpers.S
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <asm_macros.S>
+#include <platform_def.h>
+#include <marvell_pm.h>
+
+	.globl	plat_secondary_cold_boot_setup
+	.globl	plat_get_my_entrypoint
+	.globl	plat_is_my_cpu_primary
+	.globl  plat_reset_handler
+
+	/* -----------------------------------------------------
+	 * void plat_secondary_cold_boot_setup (void);
+	 *
+	 * This function performs any platform specific actions
+	 * needed for a secondary cpu after a cold reset. Right
+	 * now this is a stub function.
+	 * -----------------------------------------------------
+	 */
+func plat_secondary_cold_boot_setup
+	mov	x0, #0
+	ret
+endfunc plat_secondary_cold_boot_setup
+
+	/* ---------------------------------------------------------------------
+	 * unsigned long plat_get_my_entrypoint (void);
+	 *
+	 * Main job of this routine is to distinguish
+	 * between a cold and warm boot
+	 * For a cold boot, return 0.
+	 * For a warm boot, read the mailbox and return the address it contains.
+	 *
+	 * ---------------------------------------------------------------------
+	 */
+func plat_get_my_entrypoint
+	/* Read first word and compare it with magic num */
+	mov_imm x0, PLAT_MARVELL_MAILBOX_BASE
+	ldr     x1, [x0]
+	mov_imm x2, MVEBU_MAILBOX_MAGIC_NUM
+	cmp     x1, x2
+	beq     warm_boot  /* If compare failed, return 0, i.e. cold boot */
+	mov     x0, #0
+	ret
+warm_boot:
+	mov_imm x1, MBOX_IDX_SEC_ADDR		/* Get the jump address */
+	subs	x1, x1, #1
+	mov	x2, #(MBOX_IDX_SEC_ADDR * 8)
+	lsl	x3, x2, x1
+	add     x0, x0, x3
+	ldr     x0, [x0]
+	ret
+endfunc plat_get_my_entrypoint
+
+	/* -----------------------------------------------------
+	 * unsigned int plat_is_my_cpu_primary (void);
+	 *
+	 * Find out whether the current cpu is the primary
+	 * cpu.
+	 * -----------------------------------------------------
+	 */
+func plat_is_my_cpu_primary
+	mrs	x0, mpidr_el1
+	and	x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
+	cmp	x0, #MVEBU_PRIMARY_CPU
+	cset	w0, eq
+	ret
+endfunc plat_is_my_cpu_primary
+
+        /* -----------------------------------------------------
+	 * void plat_reset_handler (void);
+         *
+	 * Platform specific configuration right after cpu is
+	 * is our of reset.
+	 *
+         * The plat_reset_handler can clobber x0 - x18, x30.
+         * -----------------------------------------------------
+         */
+func plat_reset_handler
+	/*
+	 * Note: the configurations below  should be done before MMU,
+	 *	  I Cache and L2are enabled.
+	 *	  The reset handler is executed right after reset
+	 * 	  and before Caches are enabled.
+	 */
+
+	/* Enable L1/L2 ECC and Parity */
+	mrs x5, s3_1_c11_c0_2  /* L2 Ctrl */
+	orr x5, x5, #(1 << 21) /* Enable L1/L2 cache ECC & Parity */
+	msr s3_1_c11_c0_2, x5  /* L2 Ctrl */
+
+#if LLC_ENABLE
+	/*
+	 * Enable L2 UniqueClean evictions
+	 *  Note: this configuration assumes that LLC is configured
+	 *	  in exclusive mode.
+	 *	  Later on in the code this assumption will be validated
+	 */
+	mrs x5, s3_1_c15_c0_0  /* L2 Ctrl */
+	orr x5, x5, #(1 << 14) /* Enable UniqueClean evictions with data */
+	msr s3_1_c15_c0_0, x5  /* L2 Ctrl */
+#endif
+
+	/* Instruction Barrier to allow msr command completion */
+	isb
+
+        ret
+endfunc plat_reset_handler
diff --git a/plat/marvell/a8k/common/include/a8k_plat_def.h b/plat/marvell/a8k/common/include/a8k_plat_def.h
new file mode 100644
index 00000000..4ed8c7e6
--- /dev/null
+++ b/plat/marvell/a8k/common/include/a8k_plat_def.h
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __A8K_PLAT_DEF_H__
+#define __A8K_PLAT_DEF_H__
+
+#include <marvell_def.h>
+
+#define MVEBU_PRIMARY_CPU		0x0
+#define MVEBU_AP0			0x0
+
+/* APN806 revision ID */
+#define MVEBU_CSS_GWD_CTRL_IIDR2_REG	(MVEBU_REGS_BASE + 0x610FCC)
+#define GWD_IIDR2_REV_ID_OFFSET		12
+#define GWD_IIDR2_REV_ID_MASK		0xF
+#define GWD_IIDR2_CHIP_ID_OFFSET	20
+#define GWD_IIDR2_CHIP_ID_MASK		(0xFFF << GWD_IIDR2_CHIP_ID_OFFSET)
+
+#define CHIP_ID_AP806			0x806
+#define CHIP_ID_AP807			0x807
+
+#define COUNTER_FREQUENCY		25000000
+
+#define MVEBU_REGS_BASE			0xF0000000
+#define MVEBU_REGS_BASE_MASK		0xF0000000
+#define MVEBU_REGS_BASE_AP(ap)		MVEBU_REGS_BASE
+#define MVEBU_CP_REGS_BASE(cp_index)	(0xF2000000 + (cp_index) * 0x2000000)
+#define MVEBU_RFU_BASE			(MVEBU_REGS_BASE + 0x6F0000)
+#define MVEBU_IO_WIN_BASE(ap_index)	(MVEBU_RFU_BASE)
+#define MVEBU_IO_WIN_GCR_OFFSET		(0x70)
+#define MVEBU_IO_WIN_MAX_WINS		(7)
+
+/* Misc SoC configurations Base */
+#define MVEBU_MISC_SOC_BASE		(MVEBU_REGS_BASE + 0x6F4300)
+
+#define MVEBU_CCU_BASE(ap_index)	(MVEBU_REGS_BASE + 0x4000)
+#define MVEBU_CCU_MAX_WINS		(8)
+
+#define MVEBU_LLC_BASE(ap_index)	(MVEBU_REGS_BASE + 0x8000)
+#define MVEBU_DRAM_MAC_BASE		(MVEBU_REGS_BASE + 0x20000)
+#define MVEBU_DRAM_PHY_BASE		(MVEBU_REGS_BASE + 0x20000)
+#define MVEBU_SMMU_BASE			(MVEBU_REGS_BASE + 0x100000)
+#define MVEBU_CP_MPP_REGS(cp_index, n)	(MVEBU_CP_REGS_BASE(cp_index) + \
+						0x440000 + ((n) << 2))
+#define MVEBU_PM_MPP_REGS(cp_index, n)	(MVEBU_CP_REGS_BASE(cp_index) + \
+						0x440000 + ((n / 8) << 2))
+#define MVEBU_CP_GPIO_DATA_OUT(cp_index, n) \
+					(MVEBU_CP_REGS_BASE(cp_index) + \
+					0x440100 + ((n > 32) ? 0x40 : 0x00))
+#define MVEBU_CP_GPIO_DATA_OUT_EN(cp_index, n) \
+					(MVEBU_CP_REGS_BASE(cp_index) + \
+					0x440104 + ((n > 32) ? 0x40 : 0x00))
+#define MVEBU_CP_GPIO_DATA_IN(cp_index, n) (MVEBU_CP_REGS_BASE(cp_index) + \
+					0x440110 + ((n > 32) ? 0x40 : 0x00))
+#define MVEBU_AP_MPP_REGS(n)		(MVEBU_RFU_BASE + 0x4000 + ((n) << 2))
+#define MVEBU_AP_GPIO_REGS		(MVEBU_RFU_BASE + 0x5040)
+#define MVEBU_AP_GPIO_DATA_IN		(MVEBU_AP_GPIO_REGS + 0x10)
+#define MVEBU_AP_I2C_BASE		(MVEBU_REGS_BASE + 0x511000)
+#define MVEBU_CP0_I2C_BASE		(MVEBU_CP_REGS_BASE(0) + 0x701000)
+#define MVEBU_AP_EXT_TSEN_BASE		(MVEBU_RFU_BASE + 0x8084)
+
+#define MVEBU_AP_MC_TRUSTZONE_REG_LOW(ap, win)	(MVEBU_REGS_BASE_AP(ap) + \
+							0x20080 + ((win) * 0x8))
+#define MVEBU_AP_MC_TRUSTZONE_REG_HIGH(ap, win)	(MVEBU_REGS_BASE_AP(ap) + \
+							0x20084 + ((win) * 0x8))
+
+/* MCI indirect access definitions */
+#define MCI_MAX_UNIT_ID				2
+/* SoC RFU / IHBx4 Control */
+#define MCIX4_REG_START_ADDRESS_REG(unit_id)	(MVEBU_RFU_BASE + \
+						0x4218 + (unit_id * 0x20))
+#define MCI_REMAP_OFF_SHIFT			8
+
+#define MVEBU_MCI_REG_BASE_REMAP(index)		(0xFD000000 + \
+						((index) * 0x1000000))
+
+#define MVEBU_PCIE_X4_MAC_BASE(x)	(MVEBU_CP_REGS_BASE(x) + 0x600000)
+#define MVEBU_COMPHY_BASE(x)		(MVEBU_CP_REGS_BASE(x) + 0x441000)
+#define MVEBU_HPIPE_BASE(x)		(MVEBU_CP_REGS_BASE(x) + 0x120000)
+#define MVEBU_CP_DFX_OFFSET		(0x400200)
+
+/*****************************************************************************
+ * MVEBU memory map related constants
+ *****************************************************************************
+ */
+/* Aggregate of all devices in the first GB */
+#define DEVICE0_BASE			MVEBU_REGS_BASE
+#define DEVICE0_SIZE			0x10000000
+
+/*****************************************************************************
+ * GIC-400 & interrupt handling related constants
+ *****************************************************************************
+ */
+/* Base MVEBU compatible GIC memory map */
+#define MVEBU_GICD_BASE			0x210000
+#define MVEBU_GICC_BASE			0x220000
+
+
+/*****************************************************************************
+ * AXI Configuration
+ *****************************************************************************
+ */
+#define MVEBU_AXI_ATTR_ARCACHE_OFFSET		4
+#define MVEBU_AXI_ATTR_ARCACHE_MASK		(0xF << \
+						 MVEBU_AXI_ATTR_ARCACHE_OFFSET)
+#define MVEBU_AXI_ATTR_ARDOMAIN_OFFSET		12
+#define MVEBU_AXI_ATTR_ARDOMAIN_MASK		(0x3 << \
+						 MVEBU_AXI_ATTR_ARDOMAIN_OFFSET)
+#define MVEBU_AXI_ATTR_AWCACHE_OFFSET		20
+#define MVEBU_AXI_ATTR_AWCACHE_MASK		(0xF << \
+						 MVEBU_AXI_ATTR_AWCACHE_OFFSET)
+#define MVEBU_AXI_ATTR_AWDOMAIN_OFFSET		28
+#define MVEBU_AXI_ATTR_AWDOMAIN_MASK		(0x3 << \
+						 MVEBU_AXI_ATTR_AWDOMAIN_OFFSET)
+
+/* SATA MBUS to AXI configuration */
+#define MVEBU_SATA_M2A_AXI_ARCACHE_OFFSET	1
+#define MVEBU_SATA_M2A_AXI_ARCACHE_MASK		(0xF << \
+					MVEBU_SATA_M2A_AXI_ARCACHE_OFFSET)
+#define MVEBU_SATA_M2A_AXI_AWCACHE_OFFSET	5
+#define MVEBU_SATA_M2A_AXI_AWCACHE_MASK		(0xF << \
+					MVEBU_SATA_M2A_AXI_AWCACHE_OFFSET)
+
+/* ARM cache attributes */
+#define CACHE_ATTR_BUFFERABLE			0x1
+#define CACHE_ATTR_CACHEABLE			0x2
+#define CACHE_ATTR_READ_ALLOC			0x4
+#define CACHE_ATTR_WRITE_ALLOC			0x8
+/* Domain */
+#define DOMAIN_NON_SHAREABLE			0x0
+#define DOMAIN_INNER_SHAREABLE			0x1
+#define DOMAIN_OUTER_SHAREABLE			0x2
+#define DOMAIN_SYSTEM_SHAREABLE			0x3
+
+/************************************************************************
+ * Required platform porting definitions common to all
+ * Management Compute SubSystems (MSS)
+ ************************************************************************
+ */
+/*
+ * Load address of SCP_BL2
+ * SCP_BL2 is loaded to the same place as BL31.
+ * Once SCP_BL2 is transferred to the SCP,
+ * it is discarded and BL31 is loaded over the top.
+ */
+#ifdef SCP_IMAGE
+#define SCP_BL2_BASE                    BL31_BASE
+#endif
+
+#ifndef __ASSEMBLER__
+enum ap806_sar_target_dev {
+	SAR_PIDI_MCIX2		= 0x0,
+	SAR_MCIX4		= 0x1,
+	SAR_SPI			= 0x2,
+	SAR_SD			= 0x3,
+	SAR_PIDI_MCIX2_BD	= 0x4, /* BootRom disabled */
+	SAR_MCIX4_DB		= 0x5, /* BootRom disabled */
+	SAR_SPI_DB		= 0x6, /* BootRom disabled */
+	SAR_EMMC		= 0x7
+};
+
+enum io_win_target_ids {
+	MCI_0_TID	 = 0x0,
+	MCI_1_TID	 = 0x1,
+	MCI_2_TID	 = 0x2,
+	PIDI_TID	 = 0x3,
+	SPI_TID		 = 0x4,
+	STM_TID		 = 0x5,
+	BOOTROM_TID	 = 0x6,
+	IO_WIN_MAX_TID
+};
+
+enum ccu_target_ids {
+	IO_0_TID        = 0x00,
+	DRAM_0_TID      = 0x03,
+	IO_1_TID        = 0x0F,
+	CFG_REG_TID     = 0x10,
+	RAR_TID         = 0x20,
+	SRAM_TID        = 0x40,
+	DRAM_1_TID      = 0xC0,
+	CCU_MAX_TID,
+	INVALID_TID     = 0xFF
+};
+#endif /* __ASSEMBLER__ */
+
+#endif /* __A8K_PLAT_DEF_H__ */
diff --git a/plat/marvell/a8k/common/include/ddr_info.h b/plat/marvell/a8k/common/include/ddr_info.h
new file mode 100644
index 00000000..e19036a2
--- /dev/null
+++ b/plat/marvell/a8k/common/include/ddr_info.h
@@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#define DRAM_MAX_IFACE			1
+#define DRAM_CH0_MMAP_LOW_OFFSET	0x20200
diff --git a/plat/marvell/a8k/common/include/plat_macros.S b/plat/marvell/a8k/common/include/plat_macros.S
new file mode 100644
index 00000000..2a6ccf27
--- /dev/null
+++ b/plat/marvell/a8k/common/include/plat_macros.S
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PLAT_MACROS_S__
+#define __PLAT_MACROS_S__
+
+#include <marvell_macros.S>
+
+/*
+ * Required platform porting macros
+ * (Provided by included headers)
+ */
+.macro plat_crash_print_regs
+.endm
+
+#endif /* __PLAT_MACROS_S__ */
diff --git a/plat/marvell/a8k/common/include/platform_def.h b/plat/marvell/a8k/common/include/platform_def.h
new file mode 100644
index 00000000..f7bd23fa
--- /dev/null
+++ b/plat/marvell/a8k/common/include/platform_def.h
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PLATFORM_DEF_H__
+#define __PLATFORM_DEF_H__
+
+#include <board_marvell_def.h>
+#include <gic_common.h>
+#include <interrupt_props.h>
+#include <mvebu_def.h>
+#ifndef __ASSEMBLY__
+#include <stdio.h>
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Most platform porting definitions provided by included headers
+ */
+
+/*
+ * DRAM Memory layout:
+ *		+-----------------------+
+ *		:			:
+ *		:	Linux		:
+ * 0x04X00000-->+-----------------------+
+ *		|	BL3-3(u-boot)	|>>}>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+ *		|-----------------------|  }				       |
+ *		|	BL3-[0,1, 2]	|  }---------------------------------> |
+ *		|-----------------------|  }				||     |
+ *		|	BL2		|  }->FIP (loaded by            ||     |
+ *		|-----------------------|  }       BootROM to DRAM)     ||     |
+ *		|	FIP_TOC		|  }                            ||     |
+ * 0x04120000-->|-----------------------|				||     |
+ *		|	BL1 (RO)	|				||     |
+ * 0x04100000-->+-----------------------+				||     |
+ *		:			:				||     |
+ *		: Trusted SRAM section	:				\/     |
+ * 0x04040000-->+-----------------------+  Replaced by BL2  +----------------+ |
+ *		|	BL1 (RW)	|  <<<<<<<<<<<<<<<< | BL3-1 NOBITS   | |
+ * 0x04037000-->|-----------------------|  <<<<<<<<<<<<<<<< |----------------| |
+ *		|			|  <<<<<<<<<<<<<<<< | BL3-1 PROGBITS | |
+ * 0x04023000-->|-----------------------|		    +----------------+ |
+ *		|	BL2		|				       |
+ *		|-----------------------|				       |
+ *		|			|				       |
+ * 0x04001000-->|-----------------------|				       |
+ *		|	Shared		|				       |
+ * 0x04000000-->+-----------------------+				       |
+ *		:			:				       |
+ *		:	Linux		:				       |
+ *		:			:				       |
+ *		|-----------------------|				       |
+ *		|			|	U-Boot(BL3-3) Loaded by BL2    |
+ *		|	U-Boot		|	<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
+ * 0x00000000-->+-----------------------+
+ *
+ * Trusted SRAM section 0x4000000..0x4200000:
+ * ----------------------------------------
+ * SRAM_BASE		= 0x4001000
+ * BL2_BASE			= 0x4006000
+ * BL2_LIMIT		= BL31_BASE
+ * BL31_BASE		= 0x4023000 = (64MB + 256KB - 0x1D000)
+ * BL31_PROGBITS_LIMIT	= BL1_RW_BASE
+ * BL1_RW_BASE		= 0x4037000 = (64MB + 256KB - 0x9000)
+ * BL1_RW_LIMIT		= BL31_LIMIT = 0x4040000
+ *
+ *
+ * PLAT_MARVELL_FIP_BASE	= 0x4120000
+ */
+
+/*
+ * Since BL33 is loaded by BL2 (and validated by BL31) to DRAM offset 0,
+ * it is allowed to load/copy images to 'NULL' pointers
+ */
+#if defined(IMAGE_BL2) || defined(IMAGE_BL31)
+#define PLAT_ALLOW_ZERO_ADDR_COPY
+#endif
+
+#define PLAT_MARVELL_SRAM_BASE			0xFFE1C048
+#define PLAT_MARVELL_SRAM_END			0xFFE78000
+
+#define PLAT_MARVELL_ATF_BASE			0x4000000
+#define PLAT_MARVELL_ATF_LOAD_ADDR		(PLAT_MARVELL_ATF_BASE + \
+								0x100000)
+
+#define PLAT_MARVELL_FIP_BASE			(PLAT_MARVELL_ATF_LOAD_ADDR + \
+								0x20000)
+#define PLAT_MARVELL_FIP_MAX_SIZE		0x4000000
+
+#define PLAT_MARVELL_NORTHB_COUNT		1
+
+#define PLAT_MARVELL_CLUSTER_COUNT		2
+#define PLAT_MARVELL_CLUSTER_CORE_COUNT		2
+
+#define PLAT_MARVELL_CORE_COUNT			(PLAT_MARVELL_CLUSTER_COUNT * \
+						PLAT_MARVELL_CLUSTER_CORE_COUNT)
+
+/* DRAM[2MB..66MB] is used as Trusted ROM */
+#define PLAT_MARVELL_TRUSTED_ROM_BASE		PLAT_MARVELL_ATF_LOAD_ADDR
+/* 64 MB TODO: reduce this to minimum needed according to fip image size */
+#define PLAT_MARVELL_TRUSTED_ROM_SIZE		0x04000000
+/* Reserve 16M for SCP (Secure PayLoad) Trusted DRAM */
+#define PLAT_MARVELL_TRUSTED_DRAM_BASE		0x04400000
+#define PLAT_MARVELL_TRUSTED_DRAM_SIZE		0x01000000	/* 16 MB */
+
+/*
+ * PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
+ * plus a little space for growth.
+ */
+#define PLAT_MARVELL_MAX_BL1_RW_SIZE		0xA000
+
+/*
+ * PLAT_ARM_MAX_BL2_SIZE is calculated using the current BL2 debug size plus a
+ * little space for growth.
+ */
+#define PLAT_MARVELL_MAX_BL2_SIZE		0xF000
+
+/*
+ * PLAT_ARM_MAX_BL31_SIZE is calculated using the current BL31 debug size plus a
+ * little space for growth.
+ */
+#define PLAT_MARVEL_MAX_BL31_SIZE		0x5D000
+
+#define PLAT_MARVELL_CPU_ENTRY_ADDR		BL1_RO_BASE
+
+/* GIC related definitions */
+#define PLAT_MARVELL_GICD_BASE		(MVEBU_REGS_BASE + MVEBU_GICD_BASE)
+#define PLAT_MARVELL_GICC_BASE		(MVEBU_REGS_BASE + MVEBU_GICC_BASE)
+
+#define PLAT_MARVELL_G0_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(MARVELL_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(MARVELL_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL)
+
+#define PLAT_MARVELL_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(MARVELL_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, \
+			grp, GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(MARVELL_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(MARVELL_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(MARVELL_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(MARVELL_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(MARVELL_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(MARVELL_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL)
+
+#define PLAT_MARVELL_SHARED_RAM_CACHED		1
+
+/*
+ * Load address of BL3-3 for this platform port
+ */
+#define PLAT_MARVELL_NS_IMAGE_OFFSET		0x0
+
+/* System Reference Clock*/
+#define PLAT_REF_CLK_IN_HZ			COUNTER_FREQUENCY
+
+/*
+ * PL011 related constants
+ */
+#define PLAT_MARVELL_BOOT_UART_BASE		(MVEBU_REGS_BASE + 0x512000)
+#define PLAT_MARVELL_BOOT_UART_CLK_IN_HZ	200000000
+
+#define PLAT_MARVELL_CRASH_UART_BASE		PLAT_MARVELL_BOOT_UART_BASE
+#define PLAT_MARVELL_CRASH_UART_CLK_IN_HZ	PLAT_MARVELL_BOOT_UART_CLK_IN_HZ
+
+#define PLAT_MARVELL_BL31_RUN_UART_BASE		PLAT_MARVELL_BOOT_UART_BASE
+#define PLAT_MARVELL_BL31_RUN_UART_CLK_IN_HZ	PLAT_MARVELL_BOOT_UART_CLK_IN_HZ
+
+/* Recovery image enable */
+#define PLAT_RECOVERY_IMAGE_ENABLE		0
+
+/* Required platform porting definitions */
+#define PLAT_MAX_PWR_LVL			MPIDR_AFFLVL1
+
+/* System timer related constants */
+#define PLAT_MARVELL_NSTIMER_FRAME_ID		1
+
+/* Mailbox base address (note the lower memory space
+ * is reserved for BLE data)
+ */
+#define PLAT_MARVELL_MAILBOX_BASE		(MARVELL_TRUSTED_SRAM_BASE \
+							+ 0x400)
+#define PLAT_MARVELL_MAILBOX_SIZE		0x100
+#define PLAT_MARVELL_MAILBOX_MAGIC_NUM		0x6D72766C	/* mrvl */
+
+/* Securities */
+#define IRQ_SEC_OS_TICK_INT			MARVELL_IRQ_SEC_PHY_TIMER
+
+#define TRUSTED_DRAM_BASE			PLAT_MARVELL_TRUSTED_DRAM_BASE
+#define TRUSTED_DRAM_SIZE			PLAT_MARVELL_TRUSTED_DRAM_SIZE
+
+#define BL32_BASE				TRUSTED_DRAM_BASE
+
+#endif /* __PLATFORM_DEF_H__ */
diff --git a/plat/marvell/a8k/common/mss/mss_a8k.mk b/plat/marvell/a8k/common/mss/mss_a8k.mk
new file mode 100644
index 00000000..58f23d8d
--- /dev/null
+++ b/plat/marvell/a8k/common/mss/mss_a8k.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:	BSD-3-Clause
+# https://spdx.org/licenses
+#
+
+PLAT_MARVELL		:=	plat/marvell
+A8K_MSS_SOURCE		:=	$(PLAT_MARVELL)/a8k/common/mss
+
+BL2_SOURCES		+=	$(A8K_MSS_SOURCE)/mss_bl2_setup.c
+
+BL31_SOURCES		+=	$(A8K_MSS_SOURCE)/mss_pm_ipc.c
+
+PLAT_INCLUDES		+=	-I$(A8K_MSS_SOURCE)
+
+ifneq (${SCP_BL2},)
+# This define is used to inidcate the SCP image is present
+$(eval $(call add_define,SCP_IMAGE))
+endif
diff --git a/plat/marvell/a8k/common/mss/mss_bl2_setup.c b/plat/marvell/a8k/common/mss/mss_bl2_setup.c
new file mode 100644
index 00000000..6688551f
--- /dev/null
+++ b/plat/marvell/a8k/common/mss/mss_bl2_setup.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <a8k_common.h>
+#include <bl_common.h>
+#include <ccu.h>
+#include <cp110_setup.h>
+#include <debug.h>
+#include <marvell_plat_priv.h> /* timer functionality */
+#include <mmio.h>
+#include <platform_def.h>
+
+#include "mss_scp_bootloader.h"
+
+/* IO windows configuration */
+#define IOW_GCR_OFFSET		(0x70)
+
+/* MSS windows configuration */
+#define MSS_AEBR(base)			(base + 0x160)
+#define MSS_AIBR(base)			(base + 0x164)
+#define MSS_AEBR_MASK			0xFFF
+#define MSS_AIBR_MASK			0xFFF
+
+#define MSS_EXTERNAL_SPACE		0x50000000
+#define MSS_EXTERNAL_ACCESS_BIT		28
+#define MSS_EXTERNAL_ADDR_MASK		0xfffffff
+#define MSS_INTERNAL_ACCESS_BIT		28
+
+struct addr_map_win ccu_mem_map[] = {
+	{MVEBU_CP_REGS_BASE(0), 0x4000000, IO_0_TID}
+};
+
+/* Since the scp_bl2 image can contain firmware for cp1 and cp0 coprocessors,
+ * the access to cp0 and cp1 need to be provided. More precisely it is
+ * required to:
+ *  - get the information about device id which is stored in CP0 registers
+ *    (to distinguish between cases where we have cp0 and cp1 or standalone cp0)
+ *  - get the access to cp which is needed for loading fw for cp0/cp1
+ *    coprocessors
+ * This function configures ccu windows accordingly.
+ *
+ * Note: there is no need to restore previous ccu configuration, since in next
+ * phase (BL31) the init_ccu will be called (via apn806_init/
+ * bl31_plat_arch_setu) and therefore the ccu configuration will be overwritten.
+ */
+static int bl2_plat_mmap_init(void)
+{
+	int cfg_num, win_id, cfg_idx;
+
+	cfg_num =  ARRAY_SIZE(ccu_mem_map);
+
+	/* CCU window-0 should not be counted - it's already used */
+	if (cfg_num > (MVEBU_CCU_MAX_WINS - 1)) {
+		ERROR("BL2: %s: trying to open too many windows\n", __func__);
+		return -1;
+	}
+
+	/* Enable required CCU windows
+	 * Do not touch CCU window 0,
+	 * it's used for the internal registers access
+	 */
+	for (cfg_idx = 0, win_id = 1; cfg_idx < cfg_num; cfg_idx++, win_id++) {
+		/* Enable required CCU windows */
+		ccu_win_check(&ccu_mem_map[cfg_idx]);
+		ccu_enable_win(MVEBU_AP0, &ccu_mem_map[cfg_idx], win_id);
+	}
+
+	/* Set the default target id to PIDI */
+	mmio_write_32(MVEBU_IO_WIN_BASE(MVEBU_AP0) + IOW_GCR_OFFSET, PIDI_TID);
+
+	return 0;
+}
+
+/*****************************************************************************
+ * Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
+ * Return 0 on success, -1 otherwise.
+ *****************************************************************************
+ */
+int bl2_plat_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+{
+	int ret;
+
+	INFO("BL2: Initiating SCP_BL2 transfer to SCP\n");
+	printf("BL2: Initiating SCP_BL2 transfer to SCP\n");
+
+	/* initialize time (for delay functionality) */
+	plat_delay_timer_init();
+
+	ret = bl2_plat_mmap_init();
+	if (ret != 0)
+		return ret;
+
+	ret = scp_bootloader_transfer((void *)scp_bl2_image_info->image_base,
+		scp_bl2_image_info->image_size);
+
+	if (ret == 0)
+		INFO("BL2: SCP_BL2 transferred to SCP\n");
+	else
+		ERROR("BL2: SCP_BL2 transfer failure\n");
+
+	return ret;
+}
+
+uintptr_t bl2_plat_get_cp_mss_regs(int ap_idx, int cp_idx)
+{
+	return MVEBU_CP_REGS_BASE(cp_idx) + 0x280000;
+}
+
+uintptr_t bl2_plat_get_ap_mss_regs(int ap_idx)
+{
+	return MVEBU_REGS_BASE + 0x580000;
+}
+
+uint32_t bl2_plat_get_cp_count(int ap_idx)
+{
+	uint32_t revision = cp110_device_id_get(MVEBU_CP_REGS_BASE(0));
+	/* A8040: two CPs.
+	 * A7040: one CP.
+	 */
+	if (revision == MVEBU_80X0_DEV_ID ||
+	    revision == MVEBU_80X0_CP115_DEV_ID)
+		return 2;
+	else
+		return 1;
+}
+
+uint32_t bl2_plat_get_ap_count(void)
+{
+	/* A8040 and A7040 have only one AP */
+	return 1;
+}
+
+void bl2_plat_configure_mss_windows(uintptr_t mss_regs)
+{
+	/* set AXI External and Internal Address Bus extension */
+	mmio_write_32(MSS_AEBR(mss_regs),
+		      ((0x0 >> MSS_EXTERNAL_ACCESS_BIT) & MSS_AEBR_MASK));
+	mmio_write_32(MSS_AIBR(mss_regs),
+		      ((mss_regs >> MSS_INTERNAL_ACCESS_BIT) & MSS_AIBR_MASK));
+}
diff --git a/plat/marvell/a8k/common/mss/mss_pm_ipc.c b/plat/marvell/a8k/common/mss/mss_pm_ipc.c
new file mode 100644
index 00000000..6ff4abcc
--- /dev/null
+++ b/plat/marvell/a8k/common/mss/mss_pm_ipc.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <debug.h>
+#include <mmio.h>
+#include <psci.h>
+#include <string.h>
+
+#include <mss_pm_ipc.h>
+
+/*
+ * SISR is 32 bit interrupt register representing 32 interrupts
+ *
+ * +======+=============+=============+
+ * + Bits + 31          + 30 - 00     +
+ * +======+=============+=============+
+ * + Desc + MSS Msg Int + Reserved    +
+ * +======+=============+=============+
+ */
+#define MSS_SISR		(MVEBU_REGS_BASE + 0x5800D0)
+#define MSS_SISTR		(MVEBU_REGS_BASE + 0x5800D8)
+
+#define MSS_MSG_INT_MASK	(0x80000000)
+#define MSS_TIMER_BASE		(MVEBU_REGS_BASE_MASK + 0x580110)
+#define MSS_TRIGGER_TIMEOUT	(1000)
+
+/*****************************************************************************
+ * mss_pm_ipc_msg_send
+ *
+ * DESCRIPTION: create and transmit IPC message
+ *****************************************************************************
+ */
+int mss_pm_ipc_msg_send(unsigned int channel_id, unsigned int msg_id,
+			const psci_power_state_t *target_state)
+{
+	/* Transmit IPC message */
+#ifndef DISABLE_CLUSTER_LEVEL
+	mv_pm_ipc_msg_tx(channel_id, msg_id,
+			 (unsigned int)target_state->pwr_domain_state[
+					MPIDR_AFFLVL1]);
+#else
+	mv_pm_ipc_msg_tx(channel_id, msg_id, 0);
+#endif
+
+	return 0;
+}
+
+/*****************************************************************************
+ * mss_pm_ipc_msg_trigger
+ *
+ * DESCRIPTION: Trigger IPC message interrupt to MSS
+ *****************************************************************************
+ */
+int mss_pm_ipc_msg_trigger(void)
+{
+	unsigned int timeout;
+	unsigned int t_end;
+	unsigned int t_start = mmio_read_32(MSS_TIMER_BASE);
+
+	mmio_write_32(MSS_SISR, MSS_MSG_INT_MASK);
+
+	do {
+		/* wait while SCP process incoming interrupt */
+		if (mmio_read_32(MSS_SISTR) != MSS_MSG_INT_MASK)
+			break;
+
+		/* check timeout */
+		t_end = mmio_read_32(MSS_TIMER_BASE);
+
+		timeout = ((t_start > t_end) ?
+			   (t_start - t_end) : (t_end - t_start));
+		if (timeout > MSS_TRIGGER_TIMEOUT) {
+			ERROR("PM MSG Trigger Timeout\n");
+			break;
+		}
+
+	} while (1);
+
+	return 0;
+}
diff --git a/plat/marvell/a8k/common/mss/mss_pm_ipc.h b/plat/marvell/a8k/common/mss/mss_pm_ipc.h
new file mode 100644
index 00000000..0f694570
--- /dev/null
+++ b/plat/marvell/a8k/common/mss/mss_pm_ipc.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MSS_PM_IPC_H
+#define __MSS_PM_IPC_H
+
+#include <mss_ipc_drv.h>
+
+/* Currently MSS does not support Cluster level Power Down */
+#define DISABLE_CLUSTER_LEVEL
+
+
+/*****************************************************************************
+ * mss_pm_ipc_msg_send
+ *
+ * DESCRIPTION: create and transmit IPC message
+ *****************************************************************************
+ */
+int mss_pm_ipc_msg_send(unsigned int channel_id, unsigned int msg_id,
+			const psci_power_state_t *target_state);
+
+/*****************************************************************************
+ * mss_pm_ipc_msg_trigger
+ *
+ * DESCRIPTION: Trigger IPC message interrupt to MSS
+ *****************************************************************************
+ */
+int mss_pm_ipc_msg_trigger(void);
+
+
+#endif /* __MSS_PM_IPC_H */
diff --git a/plat/marvell/a8k/common/plat_bl1_setup.c b/plat/marvell/a8k/common/plat_bl1_setup.c
new file mode 100644
index 00000000..5d851027
--- /dev/null
+++ b/plat/marvell/a8k/common/plat_bl1_setup.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <mmio.h>
+#include <plat_marvell.h>
+
+void marvell_bl1_setup_mpps(void)
+{
+	/* Enable UART MPPs.
+	 ** In a normal system, this is done by Bootrom.
+	 */
+	mmio_write_32(MVEBU_AP_MPP_REGS(1), 0x3000);
+	mmio_write_32(MVEBU_AP_MPP_REGS(2), 0x3000);
+}
diff --git a/plat/marvell/a8k/common/plat_bl31_setup.c b/plat/marvell/a8k/common/plat_bl31_setup.c
new file mode 100644
index 00000000..6c85fcc3
--- /dev/null
+++ b/plat/marvell/a8k/common/plat_bl31_setup.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <a8k_common.h>
+#include <ap_setup.h>
+#include <cp110_setup.h>
+#include <debug.h>
+#include <marvell_plat_priv.h>
+#include <marvell_pm.h>
+#include <mmio.h>
+#include <mci.h>
+#include <plat_marvell.h>
+
+#include <mss_ipc_drv.h>
+#include <mss_mem.h>
+
+/* In Armada-8k family AP806/AP807, CP0 connected to PIDI
+ * and CP1 connected to IHB via MCI #0
+ */
+#define MVEBU_MCI0		0
+
+static _Bool pm_fw_running;
+
+/* Set a weak stub for platforms that don't need to configure GPIO */
+#pragma weak marvell_gpio_config
+int marvell_gpio_config(void)
+{
+	return 0;
+}
+
+static void marvell_bl31_mpp_init(int cp)
+{
+	uint32_t reg;
+
+	/* need to do for CP#0 only */
+	if (cp)
+		return;
+
+
+	/*
+	 * Enable CP0 I2C MPPs (MPP: 37-38)
+	 * U-Boot rely on proper MPP settings for I2C EEPROM usage
+	 * (only for CP0)
+	 */
+	reg = mmio_read_32(MVEBU_CP_MPP_REGS(0, 4));
+	mmio_write_32(MVEBU_CP_MPP_REGS(0, 4), reg | 0x2200000);
+}
+
+void marvell_bl31_mss_init(void)
+{
+	struct mss_pm_ctrl_block *mss_pm_crtl =
+			(struct mss_pm_ctrl_block *)MSS_SRAM_PM_CONTROL_BASE;
+
+	/* Check that the image was loaded successfully */
+	if (mss_pm_crtl->handshake != HOST_ACKNOWLEDGMENT) {
+		NOTICE("MSS PM is not supported in this build\n");
+		return;
+	}
+
+	/* If we got here it means that the PM firmware is running */
+	pm_fw_running = 1;
+
+	INFO("MSS IPC init\n");
+
+	if (mss_pm_crtl->ipc_state == IPC_INITIALIZED)
+		mv_pm_ipc_init(mss_pm_crtl->ipc_base_address | MVEBU_REGS_BASE);
+}
+
+_Bool is_pm_fw_running(void)
+{
+	return pm_fw_running;
+}
+
+/* This function overruns the same function in marvell_bl31_setup.c */
+void bl31_plat_arch_setup(void)
+{
+	int cp;
+	uintptr_t *mailbox = (void *)PLAT_MARVELL_MAILBOX_BASE;
+
+	/* initialize the timer for mdelay/udelay functionality */
+	plat_delay_timer_init();
+
+	/* configure apn806 */
+	ap_init();
+
+	/* In marvell_bl31_plat_arch_setup, el3 mmu is configured.
+	 * el3 mmu configuration MUST be called after apn806_init, if not,
+	 * this will cause an hang in init_io_win
+	 * (after setting the IO windows GCR values).
+	 */
+	if (mailbox[MBOX_IDX_MAGIC] != MVEBU_MAILBOX_MAGIC_NUM ||
+	    mailbox[MBOX_IDX_SUSPEND_MAGIC] != MVEBU_MAILBOX_SUSPEND_STATE)
+		marvell_bl31_plat_arch_setup();
+
+	for (cp = 0; cp < CP_COUNT; cp++) {
+	/* configure cp110 for CP0*/
+		if (cp == 1)
+			mci_initialize(MVEBU_MCI0);
+
+	/* initialize MCI & CP1 */
+		cp110_init(MVEBU_CP_REGS_BASE(cp),
+			   STREAM_ID_BASE + (cp * MAX_STREAM_ID_PER_CP));
+
+	/* Should be called only after setting IOB windows */
+		marvell_bl31_mpp_init(cp);
+	}
+
+	/* initialize IPC between MSS and ATF */
+	if (mailbox[MBOX_IDX_MAGIC] != MVEBU_MAILBOX_MAGIC_NUM ||
+	    mailbox[MBOX_IDX_SUSPEND_MAGIC] != MVEBU_MAILBOX_SUSPEND_STATE)
+		marvell_bl31_mss_init();
+
+	/* Configure GPIO */
+	marvell_gpio_config();
+}
diff --git a/plat/marvell/a8k/common/plat_ble_setup.c b/plat/marvell/a8k/common/plat_ble_setup.c
new file mode 100644
index 00000000..0cd62cbd
--- /dev/null
+++ b/plat/marvell/a8k/common/plat_ble_setup.c
@@ -0,0 +1,570 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <a8k_common.h>
+#include <ap_setup.h>
+#include <aro.h>
+#include <ccu.h>
+#include <cp110_setup.h>
+#include <debug.h>
+#include <io_win.h>
+#include <mv_ddr_if.h>
+#include <mvebu_def.h>
+#include <plat_marvell.h>
+
+/* Register for skip image use */
+#define SCRATCH_PAD_REG2		0xF06F00A8
+#define SCRATCH_PAD_SKIP_VAL		0x01
+#define NUM_OF_GPIO_PER_REG 32
+
+#define MMAP_SAVE_AND_CONFIG	0
+#define MMAP_RESTORE_SAVED	1
+
+/* SAR clock settings */
+#define MVEBU_AP_GEN_MGMT_BASE		(MVEBU_RFU_BASE + 0x8000)
+#define MVEBU_AP_SAR_REG_BASE(r)	(MVEBU_AP_GEN_MGMT_BASE + 0x200 +\
+								((r) << 2))
+
+#define SAR_CLOCK_FREQ_MODE_OFFSET	(0)
+#define SAR_CLOCK_FREQ_MODE_MASK	(0x1f << SAR_CLOCK_FREQ_MODE_OFFSET)
+#define SAR_PIDI_LOW_SPEED_OFFSET	(20)
+#define SAR_PIDI_LOW_SPEED_MASK		(1 << SAR_PIDI_LOW_SPEED_OFFSET)
+#define SAR_PIDI_LOW_SPEED_SHIFT	(15)
+#define SAR_PIDI_LOW_SPEED_SET		(1 << SAR_PIDI_LOW_SPEED_SHIFT)
+
+#define FREQ_MODE_AP_SAR_REG_NUM	(0)
+#define SAR_CLOCK_FREQ_MODE(v)		(((v) & SAR_CLOCK_FREQ_MODE_MASK) >> \
+					SAR_CLOCK_FREQ_MODE_OFFSET)
+
+#define AVS_EN_CTRL_REG			(MVEBU_AP_GEN_MGMT_BASE + 0x130)
+#define AVS_ENABLE_OFFSET		(0)
+#define AVS_SOFT_RESET_OFFSET		(2)
+#define AVS_LOW_VDD_LIMIT_OFFSET	(4)
+#define AVS_HIGH_VDD_LIMIT_OFFSET	(12)
+#define AVS_TARGET_DELTA_OFFSET		(21)
+#define AVS_VDD_LOW_LIMIT_MASK	        (0xFF << AVS_LOW_VDD_LIMIT_OFFSET)
+#define AVS_VDD_HIGH_LIMIT_MASK	        (0xFF << AVS_HIGH_VDD_LIMIT_OFFSET)
+/* VDD limit is 0.9V for A70x0 @ CPU frequency < 1600MHz */
+#define AVS_A7K_LOW_CLK_VALUE		((0x80 << AVS_TARGET_DELTA_OFFSET) | \
+					 (0x1A << AVS_HIGH_VDD_LIMIT_OFFSET) | \
+					 (0x1A << AVS_LOW_VDD_LIMIT_OFFSET) | \
+					 (0x1 << AVS_SOFT_RESET_OFFSET) | \
+					 (0x1 << AVS_ENABLE_OFFSET))
+/* VDD limit is 1.0V for all A80x0 devices */
+#define AVS_A8K_CLK_VALUE		((0x80 << AVS_TARGET_DELTA_OFFSET) | \
+					 (0x24 << AVS_HIGH_VDD_LIMIT_OFFSET) | \
+					 (0x24 << AVS_LOW_VDD_LIMIT_OFFSET) | \
+					 (0x1 << AVS_SOFT_RESET_OFFSET) | \
+					 (0x1 << AVS_ENABLE_OFFSET))
+
+#define AVS_A3900_CLK_VALUE		((0x80 << 24) | \
+					 (0x2c2 << 13) | \
+					 (0x2c2 << 3) | \
+					 (0x1 << AVS_SOFT_RESET_OFFSET) | \
+					 (0x1 << AVS_ENABLE_OFFSET))
+
+#define MVEBU_AP_EFUSE_SRV_CTRL_REG	(MVEBU_AP_GEN_MGMT_BASE + 0x8)
+#define EFUSE_SRV_CTRL_LD_SELECT_OFFS	6
+#define EFUSE_SRV_CTRL_LD_SEL_USER_MASK	(1 << EFUSE_SRV_CTRL_LD_SELECT_OFFS)
+
+/* Notify bootloader on DRAM setup */
+#define AP807_CPU_ARO_0_CTRL_0		(MVEBU_RFU_BASE + 0x82A8)
+#define AP807_CPU_ARO_1_CTRL_0		(MVEBU_RFU_BASE + 0x8D00)
+
+/* 0 - ARO clock is enabled, 1 - ARO clock is disabled */
+#define AP807_CPU_ARO_CLK_EN_OFFSET	0
+#define AP807_CPU_ARO_CLK_EN_MASK	(0x1 << AP807_CPU_ARO_CLK_EN_OFFSET)
+
+/* 0 - ARO is the clock source, 1 - PLL is the clock source */
+#define AP807_CPU_ARO_SEL_PLL_OFFSET	5
+#define AP807_CPU_ARO_SEL_PLL_MASK	(0x1 << AP807_CPU_ARO_SEL_PLL_OFFSET)
+
+/*
+ * - AVS work points in the LD0 eFuse:
+ *	SVC1 work point:     LD0[88:81]
+ *	SVC2 work point:     LD0[96:89]
+ *	SVC3 work point:     LD0[104:97]
+ *	SVC4 work point:     LD0[112:105]
+ * - Identification information in the LD-0 eFuse:
+ *	DRO:           LD0[74:65] - Not used by the SW
+ *	Revision:      LD0[78:75] - Not used by the SW
+ *	Bin:           LD0[80:79] - Not used by the SW
+ *	SW Revision:   LD0[115:113]
+ *	Cluster 1 PWR: LD0[193] - if set to 1, power down CPU Cluster-1
+ *				  resulting in 2 CPUs active only (7020)
+ */
+#define MVEBU_AP_LD_EFUSE_BASE		(MVEBU_AP_GEN_MGMT_BASE + 0xF00)
+/* Bits [94:63] - 32 data bits total */
+#define MVEBU_AP_LD0_94_63_EFUSE_OFFS	(MVEBU_AP_LD_EFUSE_BASE + 0x8)
+/* Bits [125:95] - 31 data bits total, 32nd bit is parity for bits [125:63] */
+#define MVEBU_AP_LD0_125_95_EFUSE_OFFS	(MVEBU_AP_LD_EFUSE_BASE + 0xC)
+/* Bits [220:189] - 32 data bits total */
+#define MVEBU_AP_LD0_220_189_EFUSE_OFFS	(MVEBU_AP_LD_EFUSE_BASE + 0x18)
+/* Offsets for the above 2 fields combined into single 64-bit value [125:63] */
+#define EFUSE_AP_LD0_DRO_OFFS		2		/* LD0[74:65] */
+#define EFUSE_AP_LD0_DRO_MASK		0x3FF
+#define EFUSE_AP_LD0_REVID_OFFS		12		/* LD0[78:75] */
+#define EFUSE_AP_LD0_REVID_MASK		0xF
+#define EFUSE_AP_LD0_BIN_OFFS		16		/* LD0[80:79] */
+#define EFUSE_AP_LD0_BIN_MASK		0x3
+#define EFUSE_AP_LD0_SWREV_OFFS		50		/* LD0[115:113] */
+#define EFUSE_AP_LD0_SWREV_MASK		0x7
+
+#define EFUSE_AP_LD0_SVC1_OFFS		18		/* LD0[88:81] */
+#define EFUSE_AP_LD0_SVC2_OFFS		26		/* LD0[96:89] */
+#define EFUSE_AP_LD0_SVC3_OFFS		34		/* LD0[104:97] */
+#define EFUSE_AP_LD0_SVC4_OFFS		42		/* LD0[112:105] */
+#define EFUSE_AP_LD0_WP_MASK		0xFF
+
+#define EFUSE_AP_LD0_CLUSTER_DOWN_OFFS	4
+
+/* Return the AP revision of the chip */
+static unsigned int ble_get_ap_type(void)
+{
+	unsigned int chip_rev_id;
+
+	chip_rev_id = mmio_read_32(MVEBU_CSS_GWD_CTRL_IIDR2_REG);
+	chip_rev_id = ((chip_rev_id & GWD_IIDR2_CHIP_ID_MASK) >>
+			GWD_IIDR2_CHIP_ID_OFFSET);
+
+	return chip_rev_id;
+}
+
+/******************************************************************************
+ * The routine allows to save the CCU and IO windows configuration during DRAM
+ * setup and restore them afterwards before exiting the BLE stage.
+ * Such window configuration is required since not all default settings coming
+ * from the HW and the BootROM allow access to peripherals connected to
+ * all available CPn components.
+ * For instance, when the boot device is located on CP0, the IO window to CP1
+ * is not opened automatically by the HW and if the DRAM SPD is located on CP1
+ * i2c channel, it cannot be read at BLE stage.
+ * Therefore the DRAM init procedure have to provide access to all available
+ * CPn peripherals during the BLE stage by setting the CCU IO window to all
+ * CPnph addresses and by enabling the IO windows accordingly.
+ * Additionally this function configures the CCU GCR to DRAM, which allows
+ * usage or more than 4GB DRAM as it configured by the default CCU DRAM window.
+ *
+ * IN:
+ *	MMAP_SAVE_AND_CONFIG	- save the existing configuration and update it
+ *	MMAP_RESTORE_SAVED	- restore saved configuration
+ * OUT:
+ *	NONE
+ ****************************************************************************
+ */
+static void ble_plat_mmap_config(int restore)
+{
+	if (restore == MMAP_RESTORE_SAVED) {
+		/* Restore all orig. settings that were modified by BLE stage */
+		ccu_restore_win_all(MVEBU_AP0);
+		/* Restore CCU */
+		iow_restore_win_all(MVEBU_AP0);
+		return;
+	}
+
+	/* Store original values */
+	ccu_save_win_all(MVEBU_AP0);
+	/* Save CCU */
+	iow_save_win_all(MVEBU_AP0);
+
+	init_ccu(MVEBU_AP0);
+	/* The configuration saved, now all the changes can be done */
+	init_io_win(MVEBU_AP0);
+}
+
+/****************************************************************************
+ * Setup Adaptive Voltage Switching - this is required for some platforms
+ ****************************************************************************
+ */
+static void ble_plat_avs_config(void)
+{
+	uint32_t reg_val, device_id;
+
+	/* Check which SoC is running and act accordingly */
+	if (ble_get_ap_type() == CHIP_ID_AP807) {
+		VERBOSE("AVS: Setting AP807 AVS CTRL to 0x%x\n",
+			AVS_A3900_CLK_VALUE);
+		mmio_write_32(AVS_EN_CTRL_REG, AVS_A3900_CLK_VALUE);
+		return;
+	}
+
+	/* Check which SoC is running and act accordingly */
+	device_id = cp110_device_id_get(MVEBU_CP_REGS_BASE(0));
+	switch (device_id) {
+	case MVEBU_80X0_DEV_ID:
+	case MVEBU_80X0_CP115_DEV_ID:
+		/* Set the new AVS value - fix the default one on A80x0 */
+		mmio_write_32(AVS_EN_CTRL_REG, AVS_A8K_CLK_VALUE);
+		break;
+	case MVEBU_70X0_DEV_ID:
+	case MVEBU_70X0_CP115_DEV_ID:
+		/* Only fix AVS for CPU clocks lower than 1600MHz on A70x0 */
+		reg_val = mmio_read_32(MVEBU_AP_SAR_REG_BASE(
+						FREQ_MODE_AP_SAR_REG_NUM));
+		reg_val &= SAR_CLOCK_FREQ_MODE_MASK;
+		reg_val >>= SAR_CLOCK_FREQ_MODE_OFFSET;
+		if ((reg_val > CPU_1600_DDR_900_RCLK_900_2) &&
+		    (reg_val < CPU_DDR_RCLK_INVALID))
+			mmio_write_32(AVS_EN_CTRL_REG, AVS_A7K_LOW_CLK_VALUE);
+		break;
+	default:
+		ERROR("Unsupported Device ID 0x%x\n", device_id);
+	}
+}
+
+/****************************************************************************
+ * SVC flow - v0.10
+ * The feature is intended to configure AVS value according to eFuse values
+ * that are burned individually for each SoC during the test process.
+ * Primary AVS value is stored in HD efuse and processed on power on
+ * by the HW engine
+ * Secondary AVS value is located in LD efuse and contains 4 work points for
+ * various CPU frequencies.
+ * The Secondary AVS value is only taken into account if the SW Revision stored
+ * in the efuse is greater than 0 and the CPU is running in a certain speed.
+ ****************************************************************************
+ */
+static void ble_plat_svc_config(void)
+{
+	uint32_t reg_val, avs_workpoint, freq_pidi_mode;
+	uint64_t efuse;
+	uint32_t device_id, single_cluster;
+	uint8_t  svc[4], perr[4], i, sw_ver;
+
+	/* Due to a bug in A3900 device_id skip SVC config
+	 * TODO: add SVC config once it is decided for a3900
+	 */
+	if (ble_get_ap_type() == CHIP_ID_AP807) {
+		NOTICE("SVC: SVC is not supported on AP807\n");
+		ble_plat_avs_config();
+		return;
+	}
+
+	/* Set access to LD0 */
+	reg_val = mmio_read_32(MVEBU_AP_EFUSE_SRV_CTRL_REG);
+	reg_val &= ~EFUSE_SRV_CTRL_LD_SELECT_OFFS;
+	mmio_write_32(MVEBU_AP_EFUSE_SRV_CTRL_REG, reg_val);
+
+	/* Obtain the value of LD0[125:63] */
+	efuse = mmio_read_32(MVEBU_AP_LD0_125_95_EFUSE_OFFS);
+	efuse <<= 32;
+	efuse |= mmio_read_32(MVEBU_AP_LD0_94_63_EFUSE_OFFS);
+
+	/* SW Revision:
+	 * Starting from SW revision 1 the SVC flow is supported.
+	 * SW version 0 (efuse not programmed) should follow the
+	 * regular AVS update flow.
+	 */
+	sw_ver = (efuse >> EFUSE_AP_LD0_SWREV_OFFS) & EFUSE_AP_LD0_SWREV_MASK;
+	if (sw_ver < 1) {
+		NOTICE("SVC: SW Revision 0x%x. SVC is not supported\n", sw_ver);
+		ble_plat_avs_config();
+		return;
+	}
+
+	/* Frequency mode from SAR */
+	freq_pidi_mode = SAR_CLOCK_FREQ_MODE(
+				mmio_read_32(
+					MVEBU_AP_SAR_REG_BASE(
+						FREQ_MODE_AP_SAR_REG_NUM)));
+
+	/* Decode all SVC work points */
+	svc[0] = (efuse >> EFUSE_AP_LD0_SVC1_OFFS) & EFUSE_AP_LD0_WP_MASK;
+	svc[1] = (efuse >> EFUSE_AP_LD0_SVC2_OFFS) & EFUSE_AP_LD0_WP_MASK;
+	svc[2] = (efuse >> EFUSE_AP_LD0_SVC3_OFFS) & EFUSE_AP_LD0_WP_MASK;
+	svc[3] = (efuse >> EFUSE_AP_LD0_SVC4_OFFS) & EFUSE_AP_LD0_WP_MASK;
+	INFO("SVC: Efuse WP: [0]=0x%x, [1]=0x%x, [2]=0x%x, [3]=0x%x\n",
+		svc[0], svc[1], svc[2], svc[3]);
+
+	/* Validate parity of SVC workpoint values */
+	for (i = 0; i < 4; i++) {
+		uint8_t parity, bit;
+
+		perr[i] = 0;
+
+		for (bit = 1, parity = svc[i] & 1; bit < 7; bit++)
+			parity ^= (svc[i] >> bit) & 1;
+
+		/* Starting from SW version 2, the parity check is mandatory */
+		if ((sw_ver > 1) && (parity != ((svc[i] >> 7) & 1)))
+			perr[i] = 1; /* register the error */
+	}
+
+	single_cluster = mmio_read_32(MVEBU_AP_LD0_220_189_EFUSE_OFFS);
+	single_cluster = (single_cluster >> EFUSE_AP_LD0_CLUSTER_DOWN_OFFS) & 1;
+
+	device_id = cp110_device_id_get(MVEBU_CP_REGS_BASE(0));
+	if (device_id == MVEBU_80X0_DEV_ID ||
+	    device_id == MVEBU_80X0_CP115_DEV_ID) {
+		/* A8040/A8020 */
+		NOTICE("SVC: DEV ID: %s, FREQ Mode: 0x%x\n",
+			single_cluster == 0 ? "8040" : "8020", freq_pidi_mode);
+		switch (freq_pidi_mode) {
+		case CPU_1800_DDR_1200_RCLK_1200:
+		case CPU_1800_DDR_1050_RCLK_1050:
+			if (perr[1])
+				goto perror;
+			avs_workpoint = svc[1];
+			break;
+		case CPU_1600_DDR_1050_RCLK_1050:
+		case CPU_1600_DDR_900_RCLK_900_2:
+			if (perr[2])
+				goto perror;
+			avs_workpoint = svc[2];
+			break;
+		case CPU_1300_DDR_800_RCLK_800:
+		case CPU_1300_DDR_650_RCLK_650:
+			if (perr[3])
+				goto perror;
+			avs_workpoint = svc[3];
+			break;
+		case CPU_2000_DDR_1200_RCLK_1200:
+		case CPU_2000_DDR_1050_RCLK_1050:
+		default:
+			if (perr[0])
+				goto perror;
+			avs_workpoint = svc[0];
+			break;
+		}
+	} else if (device_id == MVEBU_70X0_DEV_ID ||
+		   device_id == MVEBU_70X0_CP115_DEV_ID) {
+		/* A7040/A7020/A6040 */
+		NOTICE("SVC: DEV ID: %s, FREQ Mode: 0x%x\n",
+			single_cluster == 0 ? "7040" : "7020", freq_pidi_mode);
+		switch (freq_pidi_mode) {
+		case CPU_1400_DDR_800_RCLK_800:
+			if (single_cluster) {/* 7020 */
+				if (perr[1])
+					goto perror;
+				avs_workpoint = svc[1];
+			} else {
+				if (perr[0])
+					goto perror;
+				avs_workpoint = svc[0];
+			}
+			break;
+		case CPU_1200_DDR_800_RCLK_800:
+			if (single_cluster) {/* 7020 */
+				if (perr[2])
+					goto perror;
+				avs_workpoint = svc[2];
+			} else {
+				if (perr[1])
+					goto perror;
+				avs_workpoint = svc[1];
+			}
+			break;
+		case CPU_800_DDR_800_RCLK_800:
+		case CPU_1000_DDR_800_RCLK_800:
+			if (single_cluster) {/* 7020 */
+				if (perr[3])
+					goto perror;
+				avs_workpoint = svc[3];
+			} else {
+				if (perr[2])
+					goto perror;
+				avs_workpoint = svc[2];
+			}
+			break;
+		case CPU_600_DDR_800_RCLK_800:
+			if (perr[3])
+				goto perror;
+			avs_workpoint = svc[3]; /* Same for 6040 and 7020 */
+			break;
+		case CPU_1600_DDR_800_RCLK_800: /* 7020 only */
+		default:
+			if (single_cluster) {/* 7020 */
+				if (perr[0])
+					goto perror;
+				avs_workpoint = svc[0];
+			} else
+				avs_workpoint = 0;
+			break;
+		}
+	} else {
+		ERROR("SVC: Unsupported Device ID 0x%x\n", device_id);
+		return;
+	}
+
+	/* Set AVS control if needed */
+	if (avs_workpoint == 0) {
+		ERROR("SVC: AVS work point not changed\n");
+		return;
+	}
+
+	/* Remove parity bit */
+	avs_workpoint &= 0x7F;
+
+	reg_val  = mmio_read_32(AVS_EN_CTRL_REG);
+	NOTICE("SVC: AVS work point changed from 0x%x to 0x%x\n",
+		(reg_val & AVS_VDD_LOW_LIMIT_MASK) >> AVS_LOW_VDD_LIMIT_OFFSET,
+		avs_workpoint);
+	reg_val &= ~(AVS_VDD_LOW_LIMIT_MASK | AVS_VDD_HIGH_LIMIT_MASK);
+	reg_val |= 0x1 << AVS_ENABLE_OFFSET;
+	reg_val |= avs_workpoint << AVS_HIGH_VDD_LIMIT_OFFSET;
+	reg_val |= avs_workpoint << AVS_LOW_VDD_LIMIT_OFFSET;
+	mmio_write_32(AVS_EN_CTRL_REG, reg_val);
+	return;
+
+perror:
+	ERROR("Failed SVC WP[%d] parity check!\n", i);
+	ERROR("Ignoring the WP values\n");
+}
+
+#if PLAT_RECOVERY_IMAGE_ENABLE
+static int ble_skip_image_i2c(struct skip_image *skip_im)
+{
+	ERROR("skipping image using i2c is not supported\n");
+	/* not supported */
+	return 0;
+}
+
+static int ble_skip_image_other(struct skip_image *skip_im)
+{
+	ERROR("implementation missing for skip image request\n");
+	/* not supported, make your own implementation */
+	return 0;
+}
+
+static int ble_skip_image_gpio(struct skip_image *skip_im)
+{
+	unsigned int val;
+	unsigned int mpp_address = 0;
+	unsigned int offset = 0;
+
+	switch (skip_im->info.test.cp_ap) {
+	case(CP):
+		mpp_address = MVEBU_CP_GPIO_DATA_IN(skip_im->info.test.cp_index,
+						    skip_im->info.gpio.num);
+		if (skip_im->info.gpio.num > NUM_OF_GPIO_PER_REG)
+			offset = skip_im->info.gpio.num - NUM_OF_GPIO_PER_REG;
+		else
+			offset = skip_im->info.gpio.num;
+		break;
+	case(AP):
+		mpp_address = MVEBU_AP_GPIO_DATA_IN;
+		offset = skip_im->info.gpio.num;
+		break;
+	}
+
+	val = mmio_read_32(mpp_address);
+	val &= (1 << offset);
+	if ((!val && skip_im->info.gpio.button_state == HIGH) ||
+	    (val && skip_im->info.gpio.button_state == LOW)) {
+		mmio_write_32(SCRATCH_PAD_REG2, SCRATCH_PAD_SKIP_VAL);
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * This function checks if there's a skip image request:
+ * return values:
+ * 1: (true) images request been made.
+ * 0: (false) no image request been made.
+ */
+static int  ble_skip_current_image(void)
+{
+	struct skip_image *skip_im;
+
+	/*fetching skip image info*/
+	skip_im = (struct skip_image *)plat_marvell_get_skip_image_data();
+
+	if (skip_im == NULL)
+		return 0;
+
+	/* check if skipping image request has already been made */
+	if (mmio_read_32(SCRATCH_PAD_REG2) == SCRATCH_PAD_SKIP_VAL)
+		return 0;
+
+	switch (skip_im->detection_method) {
+	case GPIO:
+		return ble_skip_image_gpio(skip_im);
+	case I2C:
+		return ble_skip_image_i2c(skip_im);
+	case USER_DEFINED:
+		return ble_skip_image_other(skip_im);
+	}
+
+	return 0;
+}
+#endif
+
+/* Switch to ARO from PLL in ap807 */
+static void aro_to_pll(void)
+{
+	unsigned int reg;
+
+	/* switch from ARO to PLL */
+	reg = mmio_read_32(AP807_CPU_ARO_0_CTRL_0);
+	reg |= AP807_CPU_ARO_SEL_PLL_MASK;
+	mmio_write_32(AP807_CPU_ARO_0_CTRL_0, reg);
+
+	reg = mmio_read_32(AP807_CPU_ARO_1_CTRL_0);
+	reg |= AP807_CPU_ARO_SEL_PLL_MASK;
+	mmio_write_32(AP807_CPU_ARO_1_CTRL_0, reg);
+
+	mdelay(1000);
+
+	/* disable ARO clk driver */
+	reg = mmio_read_32(AP807_CPU_ARO_0_CTRL_0);
+	reg |= (AP807_CPU_ARO_CLK_EN_MASK);
+	mmio_write_32(AP807_CPU_ARO_0_CTRL_0, reg);
+
+	reg = mmio_read_32(AP807_CPU_ARO_1_CTRL_0);
+	reg |= (AP807_CPU_ARO_CLK_EN_MASK);
+	mmio_write_32(AP807_CPU_ARO_1_CTRL_0, reg);
+}
+
+int ble_plat_setup(int *skip)
+{
+	int ret;
+
+	/* Power down unused CPUs */
+	plat_marvell_early_cpu_powerdown();
+
+	/*
+	 * Save the current CCU configuration and make required changes:
+	 * - Allow access to DRAM larger than 4GB
+	 * - Open memory access to all CPn peripherals
+	 */
+	ble_plat_mmap_config(MMAP_SAVE_AND_CONFIG);
+
+#if PLAT_RECOVERY_IMAGE_ENABLE
+	/* Check if there's a skip request to bootRom recovery Image */
+	if (ble_skip_current_image()) {
+		/* close memory access to all CPn peripherals. */
+		ble_plat_mmap_config(MMAP_RESTORE_SAVED);
+		*skip = 1;
+		return 0;
+	}
+#endif
+	/* Do required CP-110 setups for BLE stage */
+	cp110_ble_init(MVEBU_CP_REGS_BASE(0));
+
+	/* Setup AVS */
+	ble_plat_svc_config();
+
+	/* work with PLL clock driver in AP807 */
+	if (ble_get_ap_type() == CHIP_ID_AP807)
+		aro_to_pll();
+
+	/* Do required AP setups for BLE stage */
+	ap_ble_init();
+
+	/* Update DRAM topology (scan DIMM SPDs) */
+	plat_marvell_dram_update_topology();
+
+	/* Kick it in */
+	ret = dram_init();
+
+	/* Restore the original CCU configuration before exit from BLE */
+	ble_plat_mmap_config(MMAP_RESTORE_SAVED);
+
+	return ret;
+}
diff --git a/plat/marvell/a8k/common/plat_pm.c b/plat/marvell/a8k/common/plat_pm.c
new file mode 100644
index 00000000..c716ee0f
--- /dev/null
+++ b/plat/marvell/a8k/common/plat_pm.c
@@ -0,0 +1,829 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <a8k_common.h>
+#include <assert.h>
+#include <bakery_lock.h>
+#include <debug.h>
+#include <delay_timer.h>
+#include <cache_llc.h>
+#include <console.h>
+#include <gicv2.h>
+#include <marvell_pm.h>
+#include <mmio.h>
+#include <mss_pm_ipc.h>
+#include <plat_marvell.h>
+#include <platform.h>
+#include <plat_pm_trace.h>
+#include <platform.h>
+
+#define MVEBU_PRIVATE_UID_REG		0x30
+#define MVEBU_RFU_GLOBL_SW_RST		0x84
+#define MVEBU_CCU_RVBAR(cpu)		(MVEBU_REGS_BASE + 0x640 + (cpu * 4))
+#define MVEBU_CCU_CPU_UN_RESET(cpu)	(MVEBU_REGS_BASE + 0x650 + (cpu * 4))
+
+#define MPIDR_CPU_GET(mpidr)		((mpidr) & MPIDR_CPU_MASK)
+#define MPIDR_CLUSTER_GET(mpidr)	MPIDR_AFFLVL1_VAL((mpidr))
+
+#define MVEBU_GPIO_MASK(index)		(1 << (index % 32))
+#define MVEBU_MPP_MASK(index)		(0xF << (4 * (index % 8)))
+#define MVEBU_GPIO_VALUE(index, value)	(value << (index % 32))
+
+#define MVEBU_USER_CMD_0_REG		(MVEBU_DRAM_MAC_BASE + 0x20)
+#define MVEBU_USER_CMD_CH0_OFFSET	28
+#define MVEBU_USER_CMD_CH0_MASK		(1 << MVEBU_USER_CMD_CH0_OFFSET)
+#define MVEBU_USER_CMD_CH0_EN		(1 << MVEBU_USER_CMD_CH0_OFFSET)
+#define MVEBU_USER_CMD_CS_OFFSET	24
+#define MVEBU_USER_CMD_CS_MASK		(0xF << MVEBU_USER_CMD_CS_OFFSET)
+#define MVEBU_USER_CMD_CS_ALL		(0xF << MVEBU_USER_CMD_CS_OFFSET)
+#define MVEBU_USER_CMD_SR_OFFSET	6
+#define MVEBU_USER_CMD_SR_MASK		(0x3 << MVEBU_USER_CMD_SR_OFFSET)
+#define MVEBU_USER_CMD_SR_ENTER		(0x1 << MVEBU_USER_CMD_SR_OFFSET)
+#define MVEBU_MC_PWR_CTRL_REG		(MVEBU_DRAM_MAC_BASE + 0x54)
+#define MVEBU_MC_AC_ON_DLY_OFFSET	8
+#define MVEBU_MC_AC_ON_DLY_MASK		(0xF << MVEBU_MC_AC_ON_DLY_OFFSET)
+#define MVEBU_MC_AC_ON_DLY_DEF_VAR	(8 << MVEBU_MC_AC_ON_DLY_OFFSET)
+#define MVEBU_MC_AC_OFF_DLY_OFFSET	4
+#define MVEBU_MC_AC_OFF_DLY_MASK	(0xF << MVEBU_MC_AC_OFF_DLY_OFFSET)
+#define MVEBU_MC_AC_OFF_DLY_DEF_VAR	(0xC << MVEBU_MC_AC_OFF_DLY_OFFSET)
+#define MVEBU_MC_PHY_AUTO_OFF_OFFSET	0
+#define MVEBU_MC_PHY_AUTO_OFF_MASK	(1 << MVEBU_MC_PHY_AUTO_OFF_OFFSET)
+#define MVEBU_MC_PHY_AUTO_OFF_EN	(1 << MVEBU_MC_PHY_AUTO_OFF_OFFSET)
+
+/* this lock synchronize AP multiple cores execution with MSS */
+DEFINE_BAKERY_LOCK(pm_sys_lock);
+
+/* Weak definitions may be overridden in specific board */
+#pragma weak plat_marvell_get_pm_cfg
+
+/* AP806 CPU power down /power up definitions */
+enum CPU_ID {
+	CPU0,
+	CPU1,
+	CPU2,
+	CPU3
+};
+
+#define REG_WR_VALIDATE_TIMEOUT		(2000)
+
+#define FEATURE_DISABLE_STATUS_REG			\
+			(MVEBU_REGS_BASE + 0x6F8230)
+#define FEATURE_DISABLE_STATUS_CPU_CLUSTER_OFFSET	4
+#define FEATURE_DISABLE_STATUS_CPU_CLUSTER_MASK		\
+			(0x1 << FEATURE_DISABLE_STATUS_CPU_CLUSTER_OFFSET)
+
+#ifdef MVEBU_SOC_AP807
+	#define PWRC_CPUN_CR_PWR_DN_RQ_OFFSET		1
+	#define PWRC_CPUN_CR_LDO_BYPASS_RDY_OFFSET	0
+#else
+#define PWRC_CPUN_CR_PWR_DN_RQ_OFFSET		0
+	#define PWRC_CPUN_CR_LDO_BYPASS_RDY_OFFSET	31
+#endif
+
+#define PWRC_CPUN_CR_REG(cpu_id)		\
+			(MVEBU_REGS_BASE + 0x680000 + (cpu_id * 0x10))
+#define PWRC_CPUN_CR_PWR_DN_RQ_MASK		\
+			(0x1 << PWRC_CPUN_CR_PWR_DN_RQ_OFFSET)
+#define PWRC_CPUN_CR_ISO_ENABLE_OFFSET		16
+#define PWRC_CPUN_CR_ISO_ENABLE_MASK		\
+			(0x1 << PWRC_CPUN_CR_ISO_ENABLE_OFFSET)
+#define PWRC_CPUN_CR_LDO_BYPASS_RDY_MASK	\
+			(0x1 << PWRC_CPUN_CR_LDO_BYPASS_RDY_OFFSET)
+
+#define CCU_B_PRCRN_REG(cpu_id)			\
+			(MVEBU_REGS_BASE + 0x1A50 + \
+			((cpu_id / 2) * (0x400)) + ((cpu_id % 2) * 4))
+#define CCU_B_PRCRN_CPUPORESET_STATIC_OFFSET	0
+#define CCU_B_PRCRN_CPUPORESET_STATIC_MASK	\
+			(0x1 << CCU_B_PRCRN_CPUPORESET_STATIC_OFFSET)
+
+/* power switch fingers */
+#define AP807_PWRC_LDO_CR0_REG			\
+			(MVEBU_REGS_BASE + 0x680000 + 0x100)
+#define AP807_PWRC_LDO_CR0_OFFSET		16
+#define AP807_PWRC_LDO_CR0_MASK			\
+			(0xff << AP807_PWRC_LDO_CR0_OFFSET)
+#define AP807_PWRC_LDO_CR0_VAL			0xfd
+
+/*
+ * Power down CPU:
+ * Used to reduce power consumption, and avoid SoC unnecessary temperature rise.
+ */
+static int plat_marvell_cpu_powerdown(int cpu_id)
+{
+	uint32_t	reg_val;
+	int		exit_loop = REG_WR_VALIDATE_TIMEOUT;
+
+	INFO("Powering down CPU%d\n", cpu_id);
+
+	/* 1. Isolation enable */
+	reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id));
+	reg_val |= 0x1 << PWRC_CPUN_CR_ISO_ENABLE_OFFSET;
+	mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val);
+
+	/* 2. Read and check Isolation enabled - verify bit set to 1 */
+	do {
+		reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id));
+		exit_loop--;
+	} while (!(reg_val & (0x1 << PWRC_CPUN_CR_ISO_ENABLE_OFFSET)) &&
+		 exit_loop > 0);
+
+	/* 3. Switch off CPU power */
+	reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id));
+	reg_val &= ~PWRC_CPUN_CR_PWR_DN_RQ_MASK;
+	mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val);
+
+	/* 4. Read and check Switch Off - verify bit set to 0 */
+	exit_loop = REG_WR_VALIDATE_TIMEOUT;
+	do {
+		reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id));
+		exit_loop--;
+	} while (reg_val & PWRC_CPUN_CR_PWR_DN_RQ_MASK && exit_loop > 0);
+
+	if (exit_loop <= 0)
+		goto cpu_poweroff_error;
+
+	/* 5. De-Assert power ready */
+	reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id));
+	reg_val &= ~PWRC_CPUN_CR_LDO_BYPASS_RDY_MASK;
+	mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val);
+
+	/* 6. Assert CPU POR reset */
+	reg_val = mmio_read_32(CCU_B_PRCRN_REG(cpu_id));
+	reg_val &= ~CCU_B_PRCRN_CPUPORESET_STATIC_MASK;
+	mmio_write_32(CCU_B_PRCRN_REG(cpu_id), reg_val);
+
+	/* 7. Read and poll on Validate the CPU is out of reset */
+	exit_loop = REG_WR_VALIDATE_TIMEOUT;
+	do {
+		reg_val = mmio_read_32(CCU_B_PRCRN_REG(cpu_id));
+		exit_loop--;
+	} while (reg_val & CCU_B_PRCRN_CPUPORESET_STATIC_MASK && exit_loop > 0);
+
+	if (exit_loop <= 0)
+		goto cpu_poweroff_error;
+
+	INFO("Successfully powered down CPU%d\n", cpu_id);
+
+	return 0;
+
+cpu_poweroff_error:
+	ERROR("ERROR: Can't power down CPU%d\n", cpu_id);
+	return -1;
+}
+
+/*
+ * Power down CPUs 1-3 at early boot stage,
+ * to reduce power consumption and SoC temperature.
+ * This is triggered by BLE prior to DDR initialization.
+ *
+ * Note:
+ * All CPUs will be powered up by plat_marvell_cpu_powerup on Linux boot stage,
+ * which is triggered by PSCI ops (pwr_domain_on).
+ */
+int plat_marvell_early_cpu_powerdown(void)
+{
+	uint32_t cpu_cluster_status =
+		mmio_read_32(FEATURE_DISABLE_STATUS_REG) &
+			     FEATURE_DISABLE_STATUS_CPU_CLUSTER_MASK;
+	/* if cpu_cluster_status bit is set,
+	 * that means we have only single cluster
+	 */
+	int cluster_count = cpu_cluster_status ? 1 : 2;
+
+	INFO("Powering off unused CPUs\n");
+
+	/* CPU1 is in AP806 cluster-0, which always exists, so power it down */
+	if (plat_marvell_cpu_powerdown(CPU1) == -1)
+		return -1;
+
+	/*
+	 * CPU2-3 are in AP806 2nd cluster (cluster-1),
+	 * which doesn't exists in dual-core systems.
+	 * so need to check if we have dual-core (single cluster)
+	 * or quad-code (2 clusters)
+	 */
+	if (cluster_count == 2) {
+		/* CPU2-3 are part of 2nd cluster */
+		if (plat_marvell_cpu_powerdown(CPU2) == -1)
+			return -1;
+		if (plat_marvell_cpu_powerdown(CPU3) == -1)
+			return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Power up CPU - part of Linux boot stage
+ */
+static int plat_marvell_cpu_powerup(u_register_t mpidr)
+{
+	uint32_t	reg_val;
+	int	cpu_id = MPIDR_CPU_GET(mpidr),
+		cluster = MPIDR_CLUSTER_GET(mpidr);
+	int	exit_loop = REG_WR_VALIDATE_TIMEOUT;
+
+	/* calculate absolute CPU ID */
+	cpu_id = cluster * PLAT_MARVELL_CLUSTER_CORE_COUNT + cpu_id;
+
+	INFO("Powering on CPU%d\n", cpu_id);
+
+#ifdef MVEBU_SOC_AP807
+	/* Activate 2 power switch fingers */
+	reg_val = mmio_read_32(AP807_PWRC_LDO_CR0_REG);
+	reg_val &= ~(AP807_PWRC_LDO_CR0_MASK);
+	reg_val |= (AP807_PWRC_LDO_CR0_VAL << AP807_PWRC_LDO_CR0_OFFSET);
+	mmio_write_32(AP807_PWRC_LDO_CR0_REG, reg_val);
+	udelay(100);
+#endif
+
+	/* 1. Switch CPU power ON */
+	reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id));
+	reg_val |= 0x1 << PWRC_CPUN_CR_PWR_DN_RQ_OFFSET;
+	mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val);
+
+	/* 2. Wait for CPU on, up to 100 uSec: */
+	udelay(100);
+
+	/* 3. Assert power ready */
+	reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id));
+	reg_val |= 0x1 << PWRC_CPUN_CR_LDO_BYPASS_RDY_OFFSET;
+	mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val);
+
+	/* 4. Read & Validate power ready
+	 * used in order to generate 16 Host CPU cycles
+	 */
+	do {
+		reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id));
+		exit_loop--;
+	} while (!(reg_val & (0x1 << PWRC_CPUN_CR_LDO_BYPASS_RDY_OFFSET)) &&
+		 exit_loop > 0);
+
+	if (exit_loop <= 0)
+		goto cpu_poweron_error;
+
+	/* 5. Isolation disable */
+	reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id));
+	reg_val &= ~PWRC_CPUN_CR_ISO_ENABLE_MASK;
+	mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val);
+
+	/* 6. Read and check Isolation enabled - verify bit set to 1 */
+	exit_loop = REG_WR_VALIDATE_TIMEOUT;
+	do {
+		reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id));
+		exit_loop--;
+	} while ((reg_val & (0x1 << PWRC_CPUN_CR_ISO_ENABLE_OFFSET)) &&
+		 exit_loop > 0);
+
+	/* 7. De Assert CPU POR reset & Core reset */
+	reg_val = mmio_read_32(CCU_B_PRCRN_REG(cpu_id));
+	reg_val |= 0x1 << CCU_B_PRCRN_CPUPORESET_STATIC_OFFSET;
+	mmio_write_32(CCU_B_PRCRN_REG(cpu_id), reg_val);
+
+	/* 8. Read & Validate CPU POR reset */
+	exit_loop = REG_WR_VALIDATE_TIMEOUT;
+	do {
+		reg_val = mmio_read_32(CCU_B_PRCRN_REG(cpu_id));
+		exit_loop--;
+	} while (!(reg_val & (0x1 << CCU_B_PRCRN_CPUPORESET_STATIC_OFFSET)) &&
+		 exit_loop > 0);
+
+	if (exit_loop <= 0)
+		goto cpu_poweron_error;
+
+	INFO("Successfully powered on CPU%d\n", cpu_id);
+
+	return 0;
+
+cpu_poweron_error:
+	ERROR("ERROR: Can't power up CPU%d\n", cpu_id);
+	return -1;
+}
+
+static int plat_marvell_cpu_on(u_register_t mpidr)
+{
+	int cpu_id;
+	int cluster;
+
+	/* Set barierr */
+	dsbsy();
+
+	/* Get cpu number - use CPU ID */
+	cpu_id =  MPIDR_CPU_GET(mpidr);
+
+	/* Get cluster number - use affinity level 1 */
+	cluster = MPIDR_CLUSTER_GET(mpidr);
+
+	/* Set CPU private UID */
+	mmio_write_32(MVEBU_REGS_BASE + MVEBU_PRIVATE_UID_REG, cluster + 0x4);
+
+	/* Set the cpu start address to BL1 entry point (align to 0x10000) */
+	mmio_write_32(MVEBU_CCU_RVBAR(cpu_id),
+		      PLAT_MARVELL_CPU_ENTRY_ADDR >> 16);
+
+	/* Get the cpu out of reset */
+	mmio_write_32(MVEBU_CCU_CPU_UN_RESET(cpu_id), 0x10001);
+
+	return 0;
+}
+
+/*****************************************************************************
+ * A8K handler called to check the validity of the power state
+ * parameter.
+ *****************************************************************************
+ */
+static int a8k_validate_power_state(unsigned int power_state,
+			    psci_power_state_t *req_state)
+{
+	int pstate = psci_get_pstate_type(power_state);
+	int pwr_lvl = psci_get_pstate_pwrlvl(power_state);
+	int i;
+
+	if (pwr_lvl > PLAT_MAX_PWR_LVL)
+		return PSCI_E_INVALID_PARAMS;
+
+	/* Sanity check the requested state */
+	if (pstate == PSTATE_TYPE_STANDBY) {
+		/*
+		 * It's possible to enter standby only on power level 0
+		 * Ignore any other power level.
+		 */
+		if (pwr_lvl != MARVELL_PWR_LVL0)
+			return PSCI_E_INVALID_PARAMS;
+
+		req_state->pwr_domain_state[MARVELL_PWR_LVL0] =
+					MARVELL_LOCAL_STATE_RET;
+	} else {
+		for (i = MARVELL_PWR_LVL0; i <= pwr_lvl; i++)
+			req_state->pwr_domain_state[i] =
+					MARVELL_LOCAL_STATE_OFF;
+	}
+
+	/*
+	 * We expect the 'state id' to be zero.
+	 */
+	if (psci_get_pstate_id(power_state))
+		return PSCI_E_INVALID_PARAMS;
+
+	return PSCI_E_SUCCESS;
+}
+
+/*****************************************************************************
+ * A8K handler called when a CPU is about to enter standby.
+ *****************************************************************************
+ */
+static void a8k_cpu_standby(plat_local_state_t cpu_state)
+{
+	ERROR("%s: needs to be implemented\n", __func__);
+	panic();
+}
+
+/*****************************************************************************
+ * A8K handler called when a power domain is about to be turned on. The
+ * mpidr determines the CPU to be turned on.
+ *****************************************************************************
+ */
+static int a8k_pwr_domain_on(u_register_t mpidr)
+{
+	/* Power up CPU (CPUs 1-3 are powered off at start of BLE) */
+	plat_marvell_cpu_powerup(mpidr);
+
+	if (is_pm_fw_running()) {
+		unsigned int target =
+				((mpidr & 0xFF) + (((mpidr >> 8) & 0xFF) * 2));
+
+		/*
+		 * pm system synchronization - used to synchronize
+		 * multiple core access to MSS
+		 */
+		bakery_lock_get(&pm_sys_lock);
+
+		/* send CPU ON IPC Message to MSS */
+		mss_pm_ipc_msg_send(target, PM_IPC_MSG_CPU_ON, 0);
+
+		/* trigger IPC message to MSS */
+		mss_pm_ipc_msg_trigger();
+
+		/* pm system synchronization */
+		bakery_lock_release(&pm_sys_lock);
+
+		/* trace message */
+		PM_TRACE(TRACE_PWR_DOMAIN_ON | target);
+	} else {
+		/* proprietary CPU ON exection flow */
+		plat_marvell_cpu_on(mpidr);
+	}
+
+	return 0;
+}
+
+/*****************************************************************************
+ * A8K handler called to validate the entry point.
+ *****************************************************************************
+ */
+static int a8k_validate_ns_entrypoint(uintptr_t entrypoint)
+{
+	return PSCI_E_SUCCESS;
+}
+
+/*****************************************************************************
+ * A8K handler called when a power domain is about to be turned off. The
+ * target_state encodes the power state that each level should transition to.
+ *****************************************************************************
+ */
+static void a8k_pwr_domain_off(const psci_power_state_t *target_state)
+{
+	if (is_pm_fw_running()) {
+		unsigned int idx = plat_my_core_pos();
+
+		/* Prevent interrupts from spuriously waking up this cpu */
+		gicv2_cpuif_disable();
+
+		/* pm system synchronization - used to synchronize multiple
+		 * core access to MSS
+		 */
+		bakery_lock_get(&pm_sys_lock);
+
+		/* send CPU OFF IPC Message to MSS */
+		mss_pm_ipc_msg_send(idx, PM_IPC_MSG_CPU_OFF, target_state);
+
+		/* trigger IPC message to MSS */
+		mss_pm_ipc_msg_trigger();
+
+		/* pm system synchronization */
+		bakery_lock_release(&pm_sys_lock);
+
+		/* trace message */
+		PM_TRACE(TRACE_PWR_DOMAIN_OFF);
+	} else {
+		INFO("%s: is not supported without SCP\n", __func__);
+	}
+}
+
+/* Get PM config to power off the SoC */
+void *plat_marvell_get_pm_cfg(void)
+{
+	return NULL;
+}
+
+/*
+ * This function should be called on restore from
+ * "suspend to RAM" state when the execution flow
+ * has to bypass BootROM image to RAM copy and speed up
+ * the system recovery
+ *
+ */
+static void plat_marvell_exit_bootrom(void)
+{
+	marvell_exit_bootrom(PLAT_MARVELL_TRUSTED_ROM_BASE);
+}
+
+/*
+ * Prepare for the power off of the system via GPIO
+ */
+static void plat_marvell_power_off_gpio(struct power_off_method *pm_cfg,
+					register_t *gpio_addr,
+					register_t *gpio_data)
+{
+	unsigned int gpio;
+	unsigned int idx;
+	unsigned int shift;
+	unsigned int reg;
+	unsigned int addr;
+	gpio_info_t *info;
+	unsigned int tog_bits;
+
+	assert((pm_cfg->cfg.gpio.pin_count < PMIC_GPIO_MAX_NUMBER) &&
+	       (pm_cfg->cfg.gpio.step_count < PMIC_GPIO_MAX_TOGGLE_STEP));
+
+	/* Prepare GPIOs for PMIC */
+	for (gpio = 0; gpio < pm_cfg->cfg.gpio.pin_count; gpio++) {
+		info = &pm_cfg->cfg.gpio.info[gpio];
+		/* Set PMIC GPIO to output mode */
+		reg = mmio_read_32(MVEBU_CP_GPIO_DATA_OUT_EN(
+				   info->cp_index, info->gpio_index));
+		mmio_write_32(MVEBU_CP_GPIO_DATA_OUT_EN(
+			      info->cp_index, info->gpio_index),
+			      reg & ~MVEBU_GPIO_MASK(info->gpio_index));
+
+		/* Set the appropriate MPP to GPIO mode */
+		reg = mmio_read_32(MVEBU_PM_MPP_REGS(info->cp_index,
+						     info->gpio_index));
+		mmio_write_32(MVEBU_PM_MPP_REGS(info->cp_index,
+						info->gpio_index),
+			reg & ~MVEBU_MPP_MASK(info->gpio_index));
+	}
+
+	/* Wait for MPP & GPIO pre-configurations done */
+	mdelay(pm_cfg->cfg.gpio.delay_ms);
+
+	/* Toggle the GPIO values, and leave final step to be triggered
+	 * after  DDR self-refresh is enabled
+	 */
+	for (idx = 0; idx < pm_cfg->cfg.gpio.step_count; idx++) {
+		tog_bits = pm_cfg->cfg.gpio.seq[idx];
+
+		/* The GPIOs must be within same GPIO register,
+		 * thus could get the original value by first GPIO
+		 */
+		info = &pm_cfg->cfg.gpio.info[0];
+		reg = mmio_read_32(MVEBU_CP_GPIO_DATA_OUT(
+				   info->cp_index, info->gpio_index));
+		addr = MVEBU_CP_GPIO_DATA_OUT(info->cp_index, info->gpio_index);
+
+		for (gpio = 0; gpio < pm_cfg->cfg.gpio.pin_count; gpio++) {
+			shift = pm_cfg->cfg.gpio.info[gpio].gpio_index % 32;
+			if (GPIO_LOW == (tog_bits & (1 << gpio)))
+				reg &= ~(1 << shift);
+			else
+				reg |= (1 << shift);
+		}
+
+		/* Set the GPIO register, for last step just store
+		 * register address and values to system registers
+		 */
+		if (idx < pm_cfg->cfg.gpio.step_count - 1) {
+			mmio_write_32(MVEBU_CP_GPIO_DATA_OUT(
+				      info->cp_index, info->gpio_index), reg);
+			mdelay(pm_cfg->cfg.gpio.delay_ms);
+		} else {
+			/* Save GPIO register and address values for
+			 * finishing the power down operation later
+			 */
+			*gpio_addr = addr;
+			*gpio_data = reg;
+		}
+	}
+}
+
+/*
+ * Prepare for the power off of the system
+ */
+static void plat_marvell_power_off_prepare(struct power_off_method *pm_cfg,
+					   register_t *addr, register_t *data)
+{
+	switch (pm_cfg->type) {
+	case PMIC_GPIO:
+		plat_marvell_power_off_gpio(pm_cfg, addr, data);
+		break;
+	default:
+		break;
+	}
+}
+
+/*****************************************************************************
+ * A8K handler called when a power domain is about to be suspended. The
+ * target_state encodes the power state that each level should transition to.
+ *****************************************************************************
+ */
+static void a8k_pwr_domain_suspend(const psci_power_state_t *target_state)
+{
+	if (is_pm_fw_running()) {
+		unsigned int idx;
+
+		/* Prevent interrupts from spuriously waking up this cpu */
+		gicv2_cpuif_disable();
+
+		idx = plat_my_core_pos();
+
+		/* pm system synchronization - used to synchronize multiple
+		 * core access to MSS
+		 */
+		bakery_lock_get(&pm_sys_lock);
+
+		/* send CPU Suspend IPC Message to MSS */
+		mss_pm_ipc_msg_send(idx, PM_IPC_MSG_CPU_SUSPEND, target_state);
+
+		/* trigger IPC message to MSS */
+		mss_pm_ipc_msg_trigger();
+
+		/* pm system synchronization */
+		bakery_lock_release(&pm_sys_lock);
+
+		/* trace message */
+		PM_TRACE(TRACE_PWR_DOMAIN_SUSPEND);
+	} else {
+		uintptr_t *mailbox = (void *)PLAT_MARVELL_MAILBOX_BASE;
+
+		INFO("Suspending to RAM\n");
+
+		/* Prevent interrupts from spuriously waking up this cpu */
+		gicv2_cpuif_disable();
+
+		mailbox[MBOX_IDX_SUSPEND_MAGIC] = MVEBU_MAILBOX_SUSPEND_STATE;
+		mailbox[MBOX_IDX_ROM_EXIT_ADDR] = (uintptr_t)&plat_marvell_exit_bootrom;
+
+#if PLAT_MARVELL_SHARED_RAM_CACHED
+		flush_dcache_range(PLAT_MARVELL_MAILBOX_BASE +
+		MBOX_IDX_SUSPEND_MAGIC * sizeof(uintptr_t),
+		2 * sizeof(uintptr_t));
+#endif
+		/* Flush and disable LLC before going off-power */
+		llc_disable(0);
+
+		isb();
+		/*
+		 * Do not halt here!
+		 * The function must return for allowing the caller function
+		 * psci_power_up_finish() to do the proper context saving and
+		 * to release the CPU lock.
+		 */
+	}
+}
+
+/*****************************************************************************
+ * A8K handler called when a power domain has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from.
+ *****************************************************************************
+ */
+static void a8k_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	/* arch specific configuration */
+	marvell_psci_arch_init(0);
+
+	/* Interrupt initialization */
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+
+	if (is_pm_fw_running()) {
+		/* trace message */
+		PM_TRACE(TRACE_PWR_DOMAIN_ON_FINISH);
+	}
+}
+
+/*****************************************************************************
+ * A8K handler called when a power domain has just been powered on after
+ * having been suspended earlier. The target_state encodes the low power state
+ * that each level has woken up from.
+ * TODO: At the moment we reuse the on finisher and reinitialize the secure
+ * context. Need to implement a separate suspend finisher.
+ *****************************************************************************
+ */
+static void a8k_pwr_domain_suspend_finish(
+					const psci_power_state_t *target_state)
+{
+	if (is_pm_fw_running()) {
+		/* arch specific configuration */
+		marvell_psci_arch_init(0);
+
+		/* Interrupt initialization */
+		gicv2_cpuif_enable();
+
+		/* trace message */
+		PM_TRACE(TRACE_PWR_DOMAIN_SUSPEND_FINISH);
+	} else {
+		uintptr_t *mailbox = (void *)PLAT_MARVELL_MAILBOX_BASE;
+
+		/* Only primary CPU requres platform init */
+		if (!plat_my_core_pos()) {
+			/* Initialize the console to provide
+			 * early debug support
+			 */
+			console_init(PLAT_MARVELL_BOOT_UART_BASE,
+			PLAT_MARVELL_BOOT_UART_CLK_IN_HZ,
+			MARVELL_CONSOLE_BAUDRATE);
+
+			bl31_plat_arch_setup();
+			marvell_bl31_platform_setup();
+			/*
+			 * Remove suspend to RAM marker from the mailbox
+			 * for treating a regular reset as a cold boot
+			 */
+			mailbox[MBOX_IDX_SUSPEND_MAGIC] = 0;
+			mailbox[MBOX_IDX_ROM_EXIT_ADDR] = 0;
+#if PLAT_MARVELL_SHARED_RAM_CACHED
+			flush_dcache_range(PLAT_MARVELL_MAILBOX_BASE +
+			MBOX_IDX_SUSPEND_MAGIC * sizeof(uintptr_t),
+			2 * sizeof(uintptr_t));
+#endif
+		}
+	}
+}
+
+/*****************************************************************************
+ * This handler is called by the PSCI implementation during the `SYSTEM_SUSPEND`
+ * call to get the `power_state` parameter. This allows the platform to encode
+ * the appropriate State-ID field within the `power_state` parameter which can
+ * be utilized in `pwr_domain_suspend()` to suspend to system affinity level.
+ *****************************************************************************
+ */
+static void a8k_get_sys_suspend_power_state(psci_power_state_t *req_state)
+{
+	/* lower affinities use PLAT_MAX_OFF_STATE */
+	for (int i = MPIDR_AFFLVL0; i <= PLAT_MAX_PWR_LVL; i++)
+		req_state->pwr_domain_state[i] = PLAT_MAX_OFF_STATE;
+}
+
+static void
+__dead2 a8k_pwr_domain_pwr_down_wfi(const psci_power_state_t *target_state)
+{
+	struct power_off_method *pm_cfg;
+	unsigned int srcmd;
+	unsigned int sdram_reg;
+	register_t gpio_data = 0, gpio_addr = 0;
+
+	if (is_pm_fw_running()) {
+		psci_power_down_wfi();
+		panic();
+	}
+
+	pm_cfg = (struct power_off_method *)plat_marvell_get_pm_cfg();
+
+	/* Prepare for power off */
+	plat_marvell_power_off_prepare(pm_cfg, &gpio_addr, &gpio_data);
+
+	/* First step to enable DDR self-refresh
+	 * to keep the data during suspend
+	 */
+	mmio_write_32(MVEBU_MC_PWR_CTRL_REG, 0x8C1);
+
+	/* Save DDR self-refresh second step register
+	 * and value to be issued later
+	 */
+	sdram_reg = MVEBU_USER_CMD_0_REG;
+	srcmd = mmio_read_32(sdram_reg);
+	srcmd &= ~(MVEBU_USER_CMD_CH0_MASK | MVEBU_USER_CMD_CS_MASK |
+		 MVEBU_USER_CMD_SR_MASK);
+	srcmd |= (MVEBU_USER_CMD_CH0_EN | MVEBU_USER_CMD_CS_ALL |
+		 MVEBU_USER_CMD_SR_ENTER);
+
+	/*
+	 * Wait for DRAM is done using registers access only.
+	 * At this stage any access to DRAM (procedure call) will
+	 * release it from the self-refresh mode
+	 */
+	__asm__ volatile (
+		/* Align to a cache line */
+		"	.balign 64\n\t"
+
+		/* Enter self refresh */
+		"	str %[srcmd], [%[sdram_reg]]\n\t"
+
+		/*
+		 * Wait 100 cycles for DDR to enter self refresh, by
+		 * doing 50 times two instructions.
+		 */
+		"	mov x1, #50\n\t"
+		"1:	subs x1, x1, #1\n\t"
+		"	bne 1b\n\t"
+
+		/* Issue the command to trigger the SoC power off */
+		"	str	%[gpio_data], [%[gpio_addr]]\n\t"
+
+		/* Trap the processor */
+		"	b .\n\t"
+		: : [srcmd] "r" (srcmd), [sdram_reg] "r" (sdram_reg),
+		    [gpio_addr] "r" (gpio_addr),  [gpio_data] "r" (gpio_data)
+		: "x1");
+
+	panic();
+}
+
+/*****************************************************************************
+ * A8K handlers to shutdown/reboot the system
+ *****************************************************************************
+ */
+static void __dead2 a8k_system_off(void)
+{
+	ERROR("%s:  needs to be implemented\n", __func__);
+	panic();
+}
+
+void plat_marvell_system_reset(void)
+{
+	mmio_write_32(MVEBU_RFU_BASE + MVEBU_RFU_GLOBL_SW_RST, 0x0);
+}
+
+static void __dead2 a8k_system_reset(void)
+{
+	plat_marvell_system_reset();
+
+	/* we shouldn't get to this point */
+	panic();
+}
+
+/*****************************************************************************
+ * Export the platform handlers via plat_arm_psci_pm_ops. The ARM Standard
+ * platform layer will take care of registering the handlers with PSCI.
+ *****************************************************************************
+ */
+const plat_psci_ops_t plat_arm_psci_pm_ops = {
+	.cpu_standby = a8k_cpu_standby,
+	.pwr_domain_on = a8k_pwr_domain_on,
+	.pwr_domain_off = a8k_pwr_domain_off,
+	.pwr_domain_suspend = a8k_pwr_domain_suspend,
+	.pwr_domain_on_finish = a8k_pwr_domain_on_finish,
+	.get_sys_suspend_power_state = a8k_get_sys_suspend_power_state,
+	.pwr_domain_suspend_finish = a8k_pwr_domain_suspend_finish,
+	.pwr_domain_pwr_down_wfi = a8k_pwr_domain_pwr_down_wfi,
+	.system_off = a8k_system_off,
+	.system_reset = a8k_system_reset,
+	.validate_power_state = a8k_validate_power_state,
+	.validate_ns_entrypoint = a8k_validate_ns_entrypoint
+};
diff --git a/plat/marvell/a8k/common/plat_pm_trace.c b/plat/marvell/a8k/common/plat_pm_trace.c
new file mode 100644
index 00000000..683e56f6
--- /dev/null
+++ b/plat/marvell/a8k/common/plat_pm_trace.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <mmio.h>
+#include <mss_mem.h>
+#include <platform.h>
+#include <plat_pm_trace.h>
+
+#ifdef PM_TRACE_ENABLE
+
+/* core trace APIs */
+core_trace_func funcTbl[PLATFORM_CORE_COUNT] = {
+	pm_core_0_trace,
+	pm_core_1_trace,
+	pm_core_2_trace,
+	pm_core_3_trace};
+
+/*****************************************************************************
+ * pm_core0_trace
+ * pm_core1_trace
+ * pm_core2_trace
+ * pm_core_3trace
+ *
+ * This functions set trace info into core cyclic trace queue in MSS SRAM
+ * memory space
+ *****************************************************************************
+ */
+void pm_core_0_trace(unsigned int trace)
+{
+	unsigned int current_position_core_0 =
+			mmio_read_32(AP_MSS_ATF_CORE_0_CTRL_BASE);
+	mmio_write_32((AP_MSS_ATF_CORE_0_INFO_BASE  +
+		     (current_position_core_0 * AP_MSS_ATF_CORE_ENTRY_SIZE)),
+		     mmio_read_32(AP_MSS_TIMER_BASE));
+	mmio_write_32((AP_MSS_ATF_CORE_0_INFO_TRACE +
+		     (current_position_core_0 * AP_MSS_ATF_CORE_ENTRY_SIZE)),
+		     trace);
+	mmio_write_32(AP_MSS_ATF_CORE_0_CTRL_BASE,
+		     ((current_position_core_0 + 1) &
+		     AP_MSS_ATF_TRACE_SIZE_MASK));
+}
+
+void pm_core_1_trace(unsigned int trace)
+{
+	unsigned int current_position_core_1 =
+			mmio_read_32(AP_MSS_ATF_CORE_1_CTRL_BASE);
+	mmio_write_32((AP_MSS_ATF_CORE_1_INFO_BASE +
+		     (current_position_core_1 * AP_MSS_ATF_CORE_ENTRY_SIZE)),
+		     mmio_read_32(AP_MSS_TIMER_BASE));
+	mmio_write_32((AP_MSS_ATF_CORE_1_INFO_TRACE +
+		     (current_position_core_1 * AP_MSS_ATF_CORE_ENTRY_SIZE)),
+		     trace);
+	mmio_write_32(AP_MSS_ATF_CORE_1_CTRL_BASE,
+		     ((current_position_core_1 + 1) &
+		     AP_MSS_ATF_TRACE_SIZE_MASK));
+}
+
+void pm_core_2_trace(unsigned int trace)
+{
+	unsigned int current_position_core_2 =
+			mmio_read_32(AP_MSS_ATF_CORE_2_CTRL_BASE);
+	mmio_write_32((AP_MSS_ATF_CORE_2_INFO_BASE +
+		     (current_position_core_2 * AP_MSS_ATF_CORE_ENTRY_SIZE)),
+		     mmio_read_32(AP_MSS_TIMER_BASE));
+	mmio_write_32((AP_MSS_ATF_CORE_2_INFO_TRACE +
+		     (current_position_core_2 * AP_MSS_ATF_CORE_ENTRY_SIZE)),
+		     trace);
+	mmio_write_32(AP_MSS_ATF_CORE_2_CTRL_BASE,
+		     ((current_position_core_2 + 1) &
+		     AP_MSS_ATF_TRACE_SIZE_MASK));
+}
+
+void pm_core_3_trace(unsigned int trace)
+{
+	unsigned int current_position_core_3 =
+			mmio_read_32(AP_MSS_ATF_CORE_3_CTRL_BASE);
+	mmio_write_32((AP_MSS_ATF_CORE_3_INFO_BASE +
+		     (current_position_core_3 * AP_MSS_ATF_CORE_ENTRY_SIZE)),
+		     mmio_read_32(AP_MSS_TIMER_BASE));
+	mmio_write_32((AP_MSS_ATF_CORE_3_INFO_TRACE +
+		     (current_position_core_3 * AP_MSS_ATF_CORE_ENTRY_SIZE)),
+		     trace);
+	mmio_write_32(AP_MSS_ATF_CORE_3_CTRL_BASE,
+		     ((current_position_core_3 + 1) &
+		     AP_MSS_ATF_TRACE_SIZE_MASK));
+}
+#endif /* PM_TRACE_ENABLE */
diff --git a/plat/marvell/a8k/common/plat_thermal.c b/plat/marvell/a8k/common/plat_thermal.c
new file mode 100644
index 00000000..02fe8209
--- /dev/null
+++ b/plat/marvell/a8k/common/plat_thermal.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <debug.h>
+#include <delay_timer.h>
+#include <mmio.h>
+#include <mvebu_def.h>
+#include <thermal.h>
+
+#define THERMAL_TIMEOUT					1200
+
+#define THERMAL_SEN_CTRL_LSB_STRT_OFFSET		0
+#define THERMAL_SEN_CTRL_LSB_STRT_MASK			\
+				(0x1 << THERMAL_SEN_CTRL_LSB_STRT_OFFSET)
+#define THERMAL_SEN_CTRL_LSB_RST_OFFSET			1
+#define THERMAL_SEN_CTRL_LSB_RST_MASK			\
+				(0x1 << THERMAL_SEN_CTRL_LSB_RST_OFFSET)
+#define THERMAL_SEN_CTRL_LSB_EN_OFFSET			2
+#define THERMAL_SEN_CTRL_LSB_EN_MASK			\
+				(0x1 << THERMAL_SEN_CTRL_LSB_EN_OFFSET)
+
+#define THERMAL_SEN_CTRL_STATS_VALID_OFFSET		16
+#define THERMAL_SEN_CTRL_STATS_VALID_MASK		\
+				(0x1 << THERMAL_SEN_CTRL_STATS_VALID_OFFSET)
+#define THERMAL_SEN_CTRL_STATS_TEMP_OUT_OFFSET		0
+#define THERMAL_SEN_CTRL_STATS_TEMP_OUT_MASK		\
+			(0x3FF << THERMAL_SEN_CTRL_STATS_TEMP_OUT_OFFSET)
+
+#define THERMAL_SEN_OUTPUT_MSB				512
+#define THERMAL_SEN_OUTPUT_COMP				1024
+
+struct tsen_regs {
+	uint32_t ext_tsen_ctrl_lsb;
+	uint32_t ext_tsen_ctrl_msb;
+	uint32_t ext_tsen_status;
+};
+
+static int ext_tsen_probe(struct tsen_config *tsen_cfg)
+{
+	uint32_t reg, timeout = 0;
+	struct tsen_regs *base;
+
+	if (tsen_cfg == NULL && tsen_cfg->regs_base == NULL) {
+		ERROR("initial thermal sensor configuration is missing\n");
+		return -1;
+	}
+	base = (struct tsen_regs *)tsen_cfg->regs_base;
+
+	INFO("initializing thermal sensor\n");
+
+	/* initialize thermal sensor hardware reset once */
+	reg = mmio_read_32((uintptr_t)&base->ext_tsen_ctrl_lsb);
+	reg &= ~THERMAL_SEN_CTRL_LSB_RST_OFFSET; /* de-assert TSEN_RESET */
+	reg |= THERMAL_SEN_CTRL_LSB_EN_MASK; /* set TSEN_EN to 1 */
+	reg |= THERMAL_SEN_CTRL_LSB_STRT_MASK; /* set TSEN_START to 1 */
+	mmio_write_32((uintptr_t)&base->ext_tsen_ctrl_lsb, reg);
+
+	reg = mmio_read_32((uintptr_t)&base->ext_tsen_status);
+	while ((reg & THERMAL_SEN_CTRL_STATS_VALID_MASK) == 0 &&
+	       timeout < THERMAL_TIMEOUT) {
+		udelay(100);
+		reg = mmio_read_32((uintptr_t)&base->ext_tsen_status);
+		timeout++;
+	}
+
+	if ((reg & THERMAL_SEN_CTRL_STATS_VALID_MASK) == 0) {
+		ERROR("thermal sensor is not ready\n");
+		return -1;
+	}
+
+	tsen_cfg->tsen_ready = 1;
+
+	VERBOSE("thermal sensor was initialized\n");
+
+	return 0;
+}
+
+static int ext_tsen_read(struct tsen_config *tsen_cfg, int *temp)
+{
+	uint32_t reg;
+	struct tsen_regs *base;
+
+	if (tsen_cfg == NULL && !tsen_cfg->tsen_ready) {
+		ERROR("thermal sensor was not initialized\n");
+		return -1;
+	}
+	base = (struct tsen_regs *)tsen_cfg->regs_base;
+
+	reg = mmio_read_32((uintptr_t)&base->ext_tsen_status);
+	reg = ((reg & THERMAL_SEN_CTRL_STATS_TEMP_OUT_MASK) >>
+		THERMAL_SEN_CTRL_STATS_TEMP_OUT_OFFSET);
+
+	/*
+	 * TSEN output format is signed as a 2s complement number
+	 * ranging from-512 to +511. when MSB is set, need to
+	 * calculate the complement number
+	 */
+	if (reg >= THERMAL_SEN_OUTPUT_MSB)
+		reg -= THERMAL_SEN_OUTPUT_COMP;
+
+	if (tsen_cfg->tsen_divisor == 0) {
+		ERROR("thermal sensor divisor cannot be zero\n");
+		return -1;
+	}
+
+	*temp = ((tsen_cfg->tsen_gain * ((int)reg)) +
+		 tsen_cfg->tsen_offset) / tsen_cfg->tsen_divisor;
+
+	return 0;
+}
+
+static struct tsen_config tsen_cfg = {
+	.tsen_offset = 153400,
+	.tsen_gain = 425,
+	.tsen_divisor = 1000,
+	.tsen_ready = 0,
+	.regs_base = (void *)MVEBU_AP_EXT_TSEN_BASE,
+	.ptr_tsen_probe = ext_tsen_probe,
+	.ptr_tsen_read = ext_tsen_read
+};
+
+struct tsen_config *marvell_thermal_config_get(void)
+{
+	return &tsen_cfg;
+}
diff --git a/plat/marvell/common/aarch64/marvell_common.c b/plat/marvell/common/aarch64/marvell_common.c
new file mode 100644
index 00000000..abc501a9
--- /dev/null
+++ b/plat/marvell/common/aarch64/marvell_common.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <debug.h>
+#include <mmio.h>
+#include <plat_marvell.h>
+#include <platform_def.h>
+#include <xlat_tables.h>
+
+
+/* Weak definitions may be overridden in specific ARM standard platform */
+#pragma weak plat_get_ns_image_entrypoint
+#pragma weak plat_marvell_get_mmap
+
+/*
+ * Set up the page tables for the generic and platform-specific memory regions.
+ * The extents of the generic memory regions are specified by the function
+ * arguments and consist of:
+ * - Trusted SRAM seen by the BL image;
+ * - Code section;
+ * - Read-only data section;
+ * - Coherent memory region, if applicable.
+ */
+void marvell_setup_page_tables(uintptr_t total_base,
+			       size_t total_size,
+			       uintptr_t code_start,
+			       uintptr_t code_limit,
+			       uintptr_t rodata_start,
+			       uintptr_t rodata_limit
+#if USE_COHERENT_MEM
+			       ,
+			       uintptr_t coh_start,
+			       uintptr_t coh_limit
+#endif
+			   )
+{
+	/*
+	 * Map the Trusted SRAM with appropriate memory attributes.
+	 * Subsequent mappings will adjust the attributes for specific regions.
+	 */
+	VERBOSE("Trusted SRAM seen by this BL image: %p - %p\n",
+		(void *) total_base, (void *) (total_base + total_size));
+	mmap_add_region(total_base, total_base,
+			total_size,
+			MT_MEMORY | MT_RW | MT_SECURE);
+
+	/* Re-map the code section */
+	VERBOSE("Code region: %p - %p\n",
+		(void *) code_start, (void *) code_limit);
+	mmap_add_region(code_start, code_start,
+			code_limit - code_start,
+			MT_CODE | MT_SECURE);
+
+	/* Re-map the read-only data section */
+	VERBOSE("Read-only data region: %p - %p\n",
+		(void *) rodata_start, (void *) rodata_limit);
+	mmap_add_region(rodata_start, rodata_start,
+			rodata_limit - rodata_start,
+			MT_RO_DATA | MT_SECURE);
+
+#if USE_COHERENT_MEM
+	/* Re-map the coherent memory region */
+	VERBOSE("Coherent region: %p - %p\n",
+		(void *) coh_start, (void *) coh_limit);
+	mmap_add_region(coh_start, coh_start,
+			coh_limit - coh_start,
+			MT_DEVICE | MT_RW | MT_SECURE);
+#endif
+
+	/* Now (re-)map the platform-specific memory regions */
+	mmap_add(plat_marvell_get_mmap());
+
+	/* Create the page tables to reflect the above mappings */
+	init_xlat_tables();
+}
+
+unsigned long plat_get_ns_image_entrypoint(void)
+{
+	return PLAT_MARVELL_NS_IMAGE_OFFSET;
+}
+
+/*****************************************************************************
+ * Gets SPSR for BL32 entry
+ *****************************************************************************
+ */
+uint32_t marvell_get_spsr_for_bl32_entry(void)
+{
+	/*
+	 * The Secure Payload Dispatcher service is responsible for
+	 * setting the SPSR prior to entry into the BL32 image.
+	 */
+	return 0;
+}
+
+/*****************************************************************************
+ * Gets SPSR for BL33 entry
+ *****************************************************************************
+ */
+uint32_t marvell_get_spsr_for_bl33_entry(void)
+{
+	unsigned long el_status;
+	unsigned int mode;
+	uint32_t spsr;
+
+	/* Figure out what mode we enter the non-secure world in */
+	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+	el_status &= ID_AA64PFR0_ELX_MASK;
+
+	mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+
+/*****************************************************************************
+ * Returns ARM platform specific memory map regions.
+ *****************************************************************************
+ */
+const mmap_region_t *plat_marvell_get_mmap(void)
+{
+	return plat_marvell_mmap;
+}
+
diff --git a/plat/marvell/common/aarch64/marvell_helpers.S b/plat/marvell/common/aarch64/marvell_helpers.S
new file mode 100644
index 00000000..a3dc917c
--- /dev/null
+++ b/plat/marvell/common/aarch64/marvell_helpers.S
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <asm_macros.S>
+#include <cortex_a72.h>
+#include <marvell_def.h>
+#include <platform_def.h>
+#ifndef PLAT_a3700
+#include <ccu.h>
+#include <cache_llc.h>
+#endif
+
+	.weak	plat_marvell_calc_core_pos
+	.weak	plat_my_core_pos
+	.globl	plat_crash_console_init
+	.globl	plat_crash_console_putc
+	.globl	platform_mem_init
+	.globl	disable_mmu_dcache
+	.globl	invalidate_tlb_all
+	.globl	platform_unmap_sram
+	.globl	disable_sram
+	.globl	disable_icache
+	.globl	invalidate_icache_all
+	.globl	marvell_exit_bootrom
+	.globl	ca72_l2_enable_unique_clean
+
+	/* -----------------------------------------------------
+	 *  unsigned int plat_my_core_pos(void)
+	 *  This function uses the plat_marvell_calc_core_pos()
+	 *  definition to get the index of the calling CPU.
+	 * -----------------------------------------------------
+	 */
+func plat_my_core_pos
+	mrs	x0, mpidr_el1
+	b	plat_marvell_calc_core_pos
+endfunc plat_my_core_pos
+
+	/* -----------------------------------------------------
+	 *  unsigned int plat_marvell_calc_core_pos(uint64_t mpidr)
+	 *  Helper function to calculate the core position.
+	 *  With this function: CorePos = (ClusterId * 2) +
+	 *  				  CoreId
+	 * -----------------------------------------------------
+	 */
+func plat_marvell_calc_core_pos
+	and	x1, x0, #MPIDR_CPU_MASK
+	and	x0, x0, #MPIDR_CLUSTER_MASK
+	add	x0, x1, x0, LSR #7
+	ret
+endfunc plat_marvell_calc_core_pos
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_init(void)
+	 * Function to initialize the crash console
+	 * without a C Runtime to print crash report.
+	 * Clobber list : x0, x1, x2
+	 * ---------------------------------------------
+	 */
+func plat_crash_console_init
+	mov_imm	x0, PLAT_MARVELL_CRASH_UART_BASE
+	mov_imm	x1, PLAT_MARVELL_CRASH_UART_CLK_IN_HZ
+	mov_imm	x2, MARVELL_CONSOLE_BAUDRATE
+	b	console_core_init
+endfunc plat_crash_console_init
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_putc(int c)
+	 * Function to print a character on the crash
+	 * console without a C Runtime.
+	 * Clobber list : x1, x2
+	 * ---------------------------------------------
+	 */
+func plat_crash_console_putc
+	mov_imm	x1, PLAT_MARVELL_CRASH_UART_BASE
+	b	console_core_putc
+endfunc plat_crash_console_putc
+
+	/* ---------------------------------------------------------------------
+	 * We don't need to carry out any memory initialization on ARM
+	 * platforms. The Secure RAM is accessible straight away.
+	 * ---------------------------------------------------------------------
+	 */
+func platform_mem_init
+	ret
+endfunc platform_mem_init
+
+	/* -----------------------------------------------------
+	 * Disable icache, dcache, and MMU
+	 * -----------------------------------------------------
+	 */
+func disable_mmu_dcache
+	mrs	x0, sctlr_el3
+	bic	x0, x0, 0x1		/* M bit - MMU */
+	bic	x0, x0, 0x4		/* C bit - Dcache L1 & L2 */
+	msr	sctlr_el3, x0
+	isb
+	b	mmu_off
+mmu_off:
+	ret
+endfunc disable_mmu_dcache
+
+	/* -----------------------------------------------------
+	 * Disable all TLB entries
+	 * -----------------------------------------------------
+	 */
+func invalidate_tlb_all
+	tlbi	alle3
+	dsb	sy
+	isb
+	ret
+endfunc invalidate_tlb_all
+
+	/* -----------------------------------------------------
+	 * Disable the i cache
+	 * -----------------------------------------------------
+	 */
+func disable_icache
+	mrs 	x0, sctlr_el3
+	bic	x0, x0, 0x1000	/* I bit - Icache L1 & L2 */
+	msr	sctlr_el3, x0
+	isb
+	ret
+endfunc disable_icache
+
+	/* -----------------------------------------------------
+	 * Disable all of the i caches
+	 * -----------------------------------------------------
+	 */
+func invalidate_icache_all
+	ic	ialluis
+	isb	sy
+	ret
+endfunc invalidate_icache_all
+
+	/* -----------------------------------------------------
+	 * Clear the SRAM enabling bit to unmap SRAM
+	 * -----------------------------------------------------
+	 */
+func platform_unmap_sram
+	ldr	x0, =CCU_SRAM_WIN_CR
+	str	wzr, [x0]
+	ret
+endfunc platform_unmap_sram
+
+	/* -----------------------------------------------------
+	 * Disable the SRAM
+	 * -----------------------------------------------------
+	 */
+func disable_sram
+	/* Disable the line lockings. They must be disabled expictly
+	 * or the OS will have problems using the cache */
+	ldr	x1, =MASTER_LLC_TC0_LOCK
+	str	wzr, [x1]
+
+	/* Invalidate all ways */
+	ldr	w1, =LLC_WAY_MASK
+	ldr	x0, =MASTER_L2X0_INV_WAY
+	str	w1, [x0]
+
+	/* Finally disable LLC */
+	ldr	x0, =MASTER_LLC_CTRL
+	str	wzr, [x0]
+
+	ret
+endfunc disable_sram
+
+	/* -----------------------------------------------------
+	 * Operation when exit bootROM:
+	 * Disable the MMU
+	 * Disable and invalidate the dcache
+	 * Unmap and disable the SRAM
+	 * Disable and invalidate the icache
+	 * -----------------------------------------------------
+	 */
+func marvell_exit_bootrom
+	/* Save the system restore address */
+	mov	x28, x0
+
+	/* Close the caches and MMU */
+	bl	disable_mmu_dcache
+
+	/*
+	 * There is nothing important in the caches now,
+	 * so invalidate them instead of cleaning.
+	 */
+	adr	x0, __RW_START__
+	adr	x1, __RW_END__
+	sub	x1, x1, x0
+	bl	inv_dcache_range
+	bl	invalidate_tlb_all
+
+	/*
+	 * Clean the memory mapping of SRAM
+	 * the DDR mapping will remain to enable boot image to execute
+	 */
+	bl	platform_unmap_sram
+
+	/* Disable the SRAM */
+	bl	disable_sram
+
+	/* Disable and invalidate icache */
+	bl	disable_icache
+	bl	invalidate_icache_all
+
+	mov	x0, x28
+	br	x0
+endfunc marvell_exit_bootrom
+
+	/*
+	 * Enable L2 UniqueClean evictions with data
+	 */
+func ca72_l2_enable_unique_clean
+
+	mrs	x0, CORTEX_A72_L2ACTLR_EL1
+	orr	x0, x0, #CORTEX_A72_L2ACTLR_ENABLE_UNIQUE_CLEAN
+	msr	CORTEX_A72_L2ACTLR_EL1, x0
+
+	ret
+endfunc ca72_l2_enable_unique_clean
diff --git a/plat/marvell/common/marvell_bl1_setup.c b/plat/marvell/common/marvell_bl1_setup.c
new file mode 100644
index 00000000..981cfbe8
--- /dev/null
+++ b/plat/marvell/common/marvell_bl1_setup.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <bl1.h>
+#include <bl1/bl1_private.h>
+#include <bl_common.h>
+#include <console.h>
+#include <debug.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <plat_marvell.h>
+#include <sp805.h>
+
+/* Weak definitions may be overridden in specific Marvell standard platform */
+#pragma weak bl1_early_platform_setup
+#pragma weak bl1_plat_arch_setup
+#pragma weak bl1_platform_setup
+#pragma weak bl1_plat_sec_mem_layout
+
+
+/* Data structure which holds the extents of the RAM for BL1*/
+static meminfo_t bl1_ram_layout;
+
+meminfo_t *bl1_plat_sec_mem_layout(void)
+{
+	return &bl1_ram_layout;
+}
+
+/*
+ * BL1 specific platform actions shared between Marvell standard platforms.
+ */
+void marvell_bl1_early_platform_setup(void)
+{
+	const size_t bl1_size = BL1_RAM_LIMIT - BL1_RAM_BASE;
+
+	/* Initialize the console to provide early debug support */
+	console_init(PLAT_MARVELL_BOOT_UART_BASE,
+		     PLAT_MARVELL_BOOT_UART_CLK_IN_HZ,
+		     MARVELL_CONSOLE_BAUDRATE);
+
+	/* Allow BL1 to see the whole Trusted RAM */
+	bl1_ram_layout.total_base = MARVELL_BL_RAM_BASE;
+	bl1_ram_layout.total_size = MARVELL_BL_RAM_SIZE;
+
+	/* Calculate how much RAM BL1 is using and how much remains free */
+	bl1_ram_layout.free_base = MARVELL_BL_RAM_BASE;
+	bl1_ram_layout.free_size = MARVELL_BL_RAM_SIZE;
+	reserve_mem(&bl1_ram_layout.free_base,
+		    &bl1_ram_layout.free_size,
+		    BL1_RAM_BASE,
+		    bl1_size);
+}
+
+void bl1_early_platform_setup(void)
+{
+	marvell_bl1_early_platform_setup();
+}
+
+/*
+ * Perform the very early platform specific architecture setup shared between
+ * MARVELL standard platforms. This only does basic initialization. Later
+ * architectural setup (bl1_arch_setup()) does not do anything platform
+ * specific.
+ */
+void marvell_bl1_plat_arch_setup(void)
+{
+	marvell_setup_page_tables(bl1_ram_layout.total_base,
+				  bl1_ram_layout.total_size,
+				  BL1_RO_BASE,
+				  BL1_RO_LIMIT,
+				  BL1_RO_DATA_BASE,
+				  BL1_RO_DATA_END
+#if USE_COHERENT_MEM
+				, BL_COHERENT_RAM_BASE,
+				  BL_COHERENT_RAM_END
+#endif
+				);
+	enable_mmu_el3(0);
+}
+
+void bl1_plat_arch_setup(void)
+{
+	marvell_bl1_plat_arch_setup();
+}
+
+/*
+ * Perform the platform specific architecture setup shared between
+ * MARVELL standard platforms.
+ */
+void marvell_bl1_platform_setup(void)
+{
+	/* Initialise the IO layer and register platform IO devices */
+	plat_marvell_io_setup();
+}
+
+void bl1_platform_setup(void)
+{
+	marvell_bl1_platform_setup();
+}
+
+void bl1_plat_prepare_exit(entry_point_info_t *ep_info)
+{
+#ifdef EL3_PAYLOAD_BASE
+	/*
+	 * Program the EL3 payload's entry point address into the CPUs mailbox
+	 * in order to release secondary CPUs from their holding pen and make
+	 * them jump there.
+	 */
+	marvell_program_trusted_mailbox(ep_info->pc);
+	dsbsy();
+	sev();
+#endif
+}
diff --git a/plat/marvell/common/marvell_bl2_setup.c b/plat/marvell/common/marvell_bl2_setup.c
new file mode 100644
index 00000000..7c87ce33
--- /dev/null
+++ b/plat/marvell/common/marvell_bl2_setup.c
@@ -0,0 +1,275 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch_helpers.h>
+#include <bl_common.h>
+#include <console.h>
+#include <marvell_def.h>
+#include <platform_def.h>
+#include <plat_marvell.h>
+#include <string.h>
+
+/* Data structure which holds the extents of the trusted SRAM for BL2 */
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+
+/*****************************************************************************
+ * This structure represents the superset of information that is passed to
+ * BL31, e.g. while passing control to it from BL2, bl31_params
+ * and other platform specific parameters
+ *****************************************************************************
+ */
+typedef struct bl2_to_bl31_params_mem {
+	bl31_params_t bl31_params;
+	image_info_t bl31_image_info;
+	image_info_t bl32_image_info;
+	image_info_t bl33_image_info;
+	entry_point_info_t bl33_ep_info;
+	entry_point_info_t bl32_ep_info;
+	entry_point_info_t bl31_ep_info;
+} bl2_to_bl31_params_mem_t;
+
+
+static bl2_to_bl31_params_mem_t bl31_params_mem;
+
+
+/* Weak definitions may be overridden in specific MARVELL standard platform */
+#pragma weak bl2_early_platform_setup
+#pragma weak bl2_platform_setup
+#pragma weak bl2_plat_arch_setup
+#pragma weak bl2_plat_sec_mem_layout
+#pragma weak bl2_plat_get_bl31_params
+#pragma weak bl2_plat_get_bl31_ep_info
+#pragma weak bl2_plat_flush_bl31_params
+#pragma weak bl2_plat_set_bl31_ep_info
+#pragma weak bl2_plat_get_scp_bl2_meminfo
+#pragma weak bl2_plat_get_bl32_meminfo
+#pragma weak bl2_plat_set_bl32_ep_info
+#pragma weak bl2_plat_get_bl33_meminfo
+#pragma weak bl2_plat_set_bl33_ep_info
+
+
+meminfo_t *bl2_plat_sec_mem_layout(void)
+{
+	return &bl2_tzram_layout;
+}
+
+/*****************************************************************************
+ * This function assigns a pointer to the memory that the platform has kept
+ * aside to pass platform specific and trusted firmware related information
+ * to BL31. This memory is allocated by allocating memory to
+ * bl2_to_bl31_params_mem_t structure which is a superset of all the
+ * structure whose information is passed to BL31
+ * NOTE: This function should be called only once and should be done
+ * before generating params to BL31
+ *****************************************************************************
+ */
+bl31_params_t *bl2_plat_get_bl31_params(void)
+{
+	bl31_params_t *bl2_to_bl31_params;
+
+	/*
+	 * Initialise the memory for all the arguments that needs to
+	 * be passed to BL31
+	 */
+	memset(&bl31_params_mem, 0, sizeof(bl2_to_bl31_params_mem_t));
+
+	/* Assign memory for TF related information */
+	bl2_to_bl31_params = &bl31_params_mem.bl31_params;
+	SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
+
+	/* Fill BL31 related information */
+	bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
+		VERSION_1, 0);
+
+	/* Fill BL32 related information if it exists */
+#if BL32_BASE
+	bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
+		VERSION_1, 0);
+	bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
+		VERSION_1, 0);
+#endif
+
+	/* Fill BL33 related information */
+	bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
+		PARAM_EP, VERSION_1, 0);
+
+	/* BL33 expects to receive the primary CPU MPID (through x0) */
+	bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();
+
+	bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
+		VERSION_1, 0);
+
+	return bl2_to_bl31_params;
+}
+
+/* Flush the TF params and the TF plat params */
+void bl2_plat_flush_bl31_params(void)
+{
+	flush_dcache_range((unsigned long)&bl31_params_mem,
+			sizeof(bl2_to_bl31_params_mem_t));
+}
+
+/*****************************************************************************
+ * This function returns a pointer to the shared memory that the platform
+ * has kept to point to entry point information of BL31 to BL2
+ *****************************************************************************
+ */
+struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
+{
+#if DEBUG
+	bl31_params_mem.bl31_ep_info.args.arg1 = MARVELL_BL31_PLAT_PARAM_VAL;
+#endif
+
+	return &bl31_params_mem.bl31_ep_info;
+}
+
+/*****************************************************************************
+ * BL1 has passed the extents of the trusted SRAM that should be visible to BL2
+ * in x0. This memory layout is sitting at the base of the free trusted SRAM.
+ * Copy it to a safe location before its reclaimed by later BL2 functionality.
+ *****************************************************************************
+ */
+void marvell_bl2_early_platform_setup(meminfo_t *mem_layout)
+{
+	/* Initialize the console to provide early debug support */
+	console_init(PLAT_MARVELL_BOOT_UART_BASE,
+		     PLAT_MARVELL_BOOT_UART_CLK_IN_HZ,
+		     MARVELL_CONSOLE_BAUDRATE);
+
+	/* Setup the BL2 memory layout */
+	bl2_tzram_layout = *mem_layout;
+
+	/* Initialise the IO layer and register platform IO devices */
+	plat_marvell_io_setup();
+}
+
+void bl2_early_platform_setup(meminfo_t *mem_layout)
+{
+	marvell_bl2_early_platform_setup(mem_layout);
+}
+
+void bl2_platform_setup(void)
+{
+	/* Nothing to do */
+}
+
+/*****************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only initializes the mmu in a quick and dirty way.
+ *****************************************************************************
+ */
+void marvell_bl2_plat_arch_setup(void)
+{
+	marvell_setup_page_tables(bl2_tzram_layout.total_base,
+				  bl2_tzram_layout.total_size,
+				  BL_CODE_BASE,
+				  BL_CODE_END,
+				  BL_RO_DATA_BASE,
+				  BL_RO_DATA_END
+#if USE_COHERENT_MEM
+				, BL_COHERENT_RAM_BASE,
+				  BL_COHERENT_RAM_END
+#endif
+			      );
+	enable_mmu_el1(0);
+}
+
+void bl2_plat_arch_setup(void)
+{
+	marvell_bl2_plat_arch_setup();
+}
+
+/*****************************************************************************
+ * Populate the extents of memory available for loading SCP_BL2 (if used),
+ * i.e. anywhere in trusted RAM as long as it doesn't overwrite BL2.
+ *****************************************************************************
+ */
+void bl2_plat_get_scp_bl2_meminfo(meminfo_t *scp_bl2_meminfo)
+{
+	*scp_bl2_meminfo = bl2_tzram_layout;
+}
+
+/*****************************************************************************
+ * Before calling this function BL31 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL31 and set SPSR and security state.
+ * On MARVELL std. platforms we only set the security state of the entrypoint
+ *****************************************************************************
+ */
+void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info,
+			       entry_point_info_t *bl31_ep_info)
+{
+	SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
+	bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+					DISABLE_ALL_EXCEPTIONS);
+}
+
+/*****************************************************************************
+ * Populate the extents of memory available for loading BL32
+ *****************************************************************************
+ */
+#ifdef BL32_BASE
+void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
+{
+	/*
+	 * Populate the extents of memory available for loading BL32.
+	 */
+	bl32_meminfo->total_base = BL32_BASE;
+	bl32_meminfo->free_base = BL32_BASE;
+	bl32_meminfo->total_size =
+			(TRUSTED_DRAM_BASE + TRUSTED_DRAM_SIZE) - BL32_BASE;
+	bl32_meminfo->free_size =
+			(TRUSTED_DRAM_BASE + TRUSTED_DRAM_SIZE) - BL32_BASE;
+}
+#endif
+
+/*****************************************************************************
+ * Before calling this function BL32 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL32 and set SPSR and security state.
+ * On MARVELL std. platforms we only set the security state of the entrypoint
+ *****************************************************************************
+ */
+void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
+			       entry_point_info_t *bl32_ep_info)
+{
+	SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
+	bl32_ep_info->spsr = marvell_get_spsr_for_bl32_entry();
+}
+
+/*****************************************************************************
+ * Before calling this function BL33 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL33 and set SPSR and security state.
+ * On MARVELL std. platforms we only set the security state of the entrypoint
+ *****************************************************************************
+ */
+void bl2_plat_set_bl33_ep_info(image_info_t *image,
+			       entry_point_info_t *bl33_ep_info)
+{
+
+	SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
+	bl33_ep_info->spsr = marvell_get_spsr_for_bl33_entry();
+}
+
+/*****************************************************************************
+ * Populate the extents of memory available for loading BL33
+ *****************************************************************************
+ */
+void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
+{
+	bl33_meminfo->total_base = MARVELL_DRAM_BASE;
+	bl33_meminfo->total_size = MARVELL_DRAM_SIZE;
+	bl33_meminfo->free_base = MARVELL_DRAM_BASE;
+	bl33_meminfo->free_size = MARVELL_DRAM_SIZE;
+}
diff --git a/plat/marvell/common/marvell_bl31_setup.c b/plat/marvell/common/marvell_bl31_setup.c
new file mode 100644
index 00000000..a74816b7
--- /dev/null
+++ b/plat/marvell/common/marvell_bl31_setup.c
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch.h>
+#include <assert.h>
+#include <console.h>
+#include <debug.h>
+#include <marvell_def.h>
+#include <marvell_plat_priv.h>
+#include <plat_marvell.h>
+#include <platform.h>
+
+#ifdef USE_CCI
+#include <cci.h>
+#endif
+
+/*
+ * The next 3 constants identify the extents of the code, RO data region and the
+ * limit of the BL31 image.  These addresses are used by the MMU setup code and
+ * therefore they must be page-aligned.  It is the responsibility of the linker
+ * script to ensure that __RO_START__, __RO_END__ & __BL31_END__ linker symbols
+ * refer to page-aligned addresses.
+ */
+#define BL31_END (unsigned long)(&__BL31_END__)
+
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL31 from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+/* Weak definitions may be overridden in specific ARM standard platform */
+#pragma weak bl31_early_platform_setup
+#pragma weak bl31_platform_setup
+#pragma weak bl31_plat_arch_setup
+#pragma weak bl31_plat_get_next_image_ep_info
+#pragma weak plat_get_syscnt_freq2
+
+/*****************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for
+ * the security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ *****************************************************************************
+ */
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+	entry_point_info_t *next_image_info;
+
+	assert(sec_state_is_valid(type));
+	next_image_info = (type == NON_SECURE)
+			? &bl33_image_ep_info : &bl32_image_ep_info;
+
+	return next_image_info;
+}
+
+/*****************************************************************************
+ * Perform any BL31 early platform setup common to ARM standard platforms.
+ * Here is an opportunity to copy parameters passed by the calling EL (S-EL1
+ * in BL2 & S-EL3 in BL1) before they are lost (potentially). This needs to be
+ * done before the MMU is initialized so that the memory layout can be used
+ * while creating page tables. BL2 has flushed this information to memory, so
+ * we are guaranteed to pick up good data.
+ *****************************************************************************
+ */
+void marvell_bl31_early_platform_setup(bl31_params_t *from_bl2,
+				void *plat_params_from_bl2)
+{
+	/* Initialize the console to provide early debug support */
+	console_init(PLAT_MARVELL_BOOT_UART_BASE,
+		     PLAT_MARVELL_BOOT_UART_CLK_IN_HZ,
+		     MARVELL_CONSOLE_BAUDRATE);
+
+#if RESET_TO_BL31
+	/* There are no parameters from BL2 if BL31 is a reset vector */
+	assert(from_bl2 == NULL);
+	assert(plat_params_from_bl2 == NULL);
+
+#ifdef BL32_BASE
+	/* Populate entry point information for BL32 */
+	SET_PARAM_HEAD(&bl32_image_ep_info,
+				PARAM_EP,
+				VERSION_1,
+				0);
+	SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
+	bl32_image_ep_info.pc = BL32_BASE;
+	bl32_image_ep_info.spsr = marvell_get_spsr_for_bl32_entry();
+#endif /* BL32_BASE */
+
+	/* Populate entry point information for BL33 */
+	SET_PARAM_HEAD(&bl33_image_ep_info,
+				PARAM_EP,
+				VERSION_1,
+				0);
+	/*
+	 * Tell BL31 where the non-trusted software image
+	 * is located and the entry state information
+	 */
+	bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
+	bl33_image_ep_info.spsr = marvell_get_spsr_for_bl33_entry();
+	SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+
+#else
+	/*
+	 * Check params passed from BL2 should not be NULL,
+	 */
+	assert(from_bl2 != NULL);
+	assert(from_bl2->h.type == PARAM_BL31);
+	assert(from_bl2->h.version >= VERSION_1);
+	/*
+	 * In debug builds, we pass a special value in 'plat_params_from_bl2'
+	 * to verify platform parameters from BL2 to BL31.
+	 * In release builds, it's not used.
+	 */
+	assert(((unsigned long long)plat_params_from_bl2) ==
+		MARVELL_BL31_PLAT_PARAM_VAL);
+
+	/*
+	 * Copy BL32 (if populated by BL2) and BL33 entry point information.
+	 * They are stored in Secure RAM, in BL2's address space.
+	 */
+	if (from_bl2->bl32_ep_info)
+		bl32_image_ep_info = *from_bl2->bl32_ep_info;
+	bl33_image_ep_info = *from_bl2->bl33_ep_info;
+#endif
+}
+
+void bl31_early_platform_setup(bl31_params_t *from_bl2,
+				void *plat_params_from_bl2)
+{
+	marvell_bl31_early_platform_setup(from_bl2, plat_params_from_bl2);
+
+#ifdef USE_CCI
+	/*
+	 * Initialize CCI for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	plat_marvell_interconnect_init();
+
+	/*
+	 * Enable CCI coherency for the primary CPU's cluster.
+	 * Platform specific PSCI code will enable coherency for other
+	 * clusters.
+	 */
+	plat_marvell_interconnect_enter_coherency();
+#endif
+}
+
+/*****************************************************************************
+ * Perform any BL31 platform setup common to ARM standard platforms
+ *****************************************************************************
+ */
+void marvell_bl31_platform_setup(void)
+{
+	/* Initialize the GIC driver, cpu and distributor interfaces */
+	plat_marvell_gic_driver_init();
+	plat_marvell_gic_init();
+
+	/* For Armada-8k-plus family, the SoC includes more than
+	 * a single AP die, but the default die that boots is AP #0.
+	 * For other families there is only one die (#0).
+	 * Initialize psci arch from die 0
+	 */
+	marvell_psci_arch_init(0);
+}
+
+/*****************************************************************************
+ * Perform any BL31 platform runtime setup prior to BL31 exit common to ARM
+ * standard platforms
+ *****************************************************************************
+ */
+void marvell_bl31_plat_runtime_setup(void)
+{
+	/* Initialize the runtime console */
+	console_init(PLAT_MARVELL_BL31_RUN_UART_BASE,
+		     PLAT_MARVELL_BL31_RUN_UART_CLK_IN_HZ,
+		     MARVELL_CONSOLE_BAUDRATE);
+}
+
+void bl31_platform_setup(void)
+{
+	marvell_bl31_platform_setup();
+}
+
+void bl31_plat_runtime_setup(void)
+{
+	marvell_bl31_plat_runtime_setup();
+}
+
+/*****************************************************************************
+ * Perform the very early platform specific architectural setup shared between
+ * ARM standard platforms. This only does basic initialization. Later
+ * architectural setup (bl31_arch_setup()) does not do anything platform
+ * specific.
+ *****************************************************************************
+ */
+void marvell_bl31_plat_arch_setup(void)
+{
+	marvell_setup_page_tables(BL31_BASE,
+				  BL31_END - BL31_BASE,
+				  BL_CODE_BASE,
+				  BL_CODE_END,
+				  BL_RO_DATA_BASE,
+				  BL_RO_DATA_END
+#if USE_COHERENT_MEM
+				, BL_COHERENT_RAM_BASE,
+				  BL_COHERENT_RAM_END
+#endif
+			);
+
+#if BL31_CACHE_DISABLE
+	enable_mmu_el3(DISABLE_DCACHE);
+	INFO("Cache is disabled in BL3\n");
+#else
+	enable_mmu_el3(0);
+#endif
+}
+
+void bl31_plat_arch_setup(void)
+{
+	marvell_bl31_plat_arch_setup();
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	return PLAT_REF_CLK_IN_HZ;
+}
diff --git a/plat/marvell/common/marvell_cci.c b/plat/marvell/common/marvell_cci.c
new file mode 100644
index 00000000..2df48024
--- /dev/null
+++ b/plat/marvell/common/marvell_cci.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <cci.h>
+#include <plat_marvell.h>
+
+static const int cci_map[] = {
+	PLAT_MARVELL_CCI_CLUSTER0_SL_IFACE_IX,
+	PLAT_MARVELL_CCI_CLUSTER1_SL_IFACE_IX
+};
+
+/****************************************************************************
+ * The following functions are defined as weak to allow a platform to override
+ * the way ARM CCI driver is initialised and used.
+ ****************************************************************************
+ */
+#pragma weak plat_marvell_interconnect_init
+#pragma weak plat_marvell_interconnect_enter_coherency
+#pragma weak plat_marvell_interconnect_exit_coherency
+
+
+/****************************************************************************
+ * Helper function to initialize ARM CCI driver.
+ ****************************************************************************
+ */
+void plat_marvell_interconnect_init(void)
+{
+	cci_init(PLAT_MARVELL_CCI_BASE, cci_map, ARRAY_SIZE(cci_map));
+}
+
+/****************************************************************************
+ * Helper function to place current master into coherency
+ ****************************************************************************
+ */
+void plat_marvell_interconnect_enter_coherency(void)
+{
+	cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr_el1()));
+}
+
+/****************************************************************************
+ * Helper function to remove current master from coherency
+ ****************************************************************************
+ */
+void plat_marvell_interconnect_exit_coherency(void)
+{
+	cci_disable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr_el1()));
+}
diff --git a/plat/marvell/common/marvell_common.mk b/plat/marvell/common/marvell_common.mk
new file mode 100644
index 00000000..3ee2f3db
--- /dev/null
+++ b/plat/marvell/common/marvell_common.mk
@@ -0,0 +1,67 @@
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:     BSD-3-Clause
+# https://spdx.org/licenses
+
+MARVELL_PLAT_BASE		:= plat/marvell
+MARVELL_PLAT_INCLUDE_BASE	:= include/plat/marvell
+
+include $(MARVELL_PLAT_BASE)/version.mk
+include $(MARVELL_PLAT_BASE)/marvell.mk
+
+VERSION_STRING			+=(Marvell-${SUBVERSION})
+
+SEPARATE_CODE_AND_RODATA	:= 1
+
+# flag to switch from PLL to ARO
+ARO_ENABLE			:= 0
+$(eval $(call add_define,ARO_ENABLE))
+# Enable/Disable LLC
+LLC_ENABLE			:= 1
+$(eval $(call add_define,LLC_ENABLE))
+
+PLAT_INCLUDES		+=	-I. -Iinclude/common/tbbr		\
+				-I$(MARVELL_PLAT_INCLUDE_BASE)/common	\
+				-I$(MARVELL_PLAT_INCLUDE_BASE)/common/aarch64
+
+
+PLAT_BL_COMMON_SOURCES  +=      lib/xlat_tables/xlat_tables_common.c			\
+				lib/xlat_tables/aarch64/xlat_tables.c			\
+				$(MARVELL_PLAT_BASE)/common/aarch64/marvell_common.c	\
+				$(MARVELL_PLAT_BASE)/common/aarch64/marvell_helpers.S
+
+BL1_SOURCES		+=	drivers/delay_timer/delay_timer.c			\
+				drivers/io/io_fip.c					\
+				drivers/io/io_memmap.c					\
+				drivers/io/io_storage.c					\
+				$(MARVELL_PLAT_BASE)/common/marvell_bl1_setup.c		\
+				$(MARVELL_PLAT_BASE)/common/marvell_io_storage.c	\
+				$(MARVELL_PLAT_BASE)/common/plat_delay_timer.c
+
+ifdef EL3_PAYLOAD_BASE
+# Need the arm_program_trusted_mailbox() function to release secondary CPUs from
+# their holding pen
+endif
+
+BL2_SOURCES		+=	drivers/io/io_fip.c					\
+				drivers/io/io_memmap.c					\
+				drivers/io/io_storage.c					\
+				$(MARVELL_PLAT_BASE)/common/marvell_bl2_setup.c		\
+				$(MARVELL_PLAT_BASE)/common/marvell_io_storage.c
+
+BL31_SOURCES		+=	$(MARVELL_PLAT_BASE)/common/marvell_bl31_setup.c	\
+				$(MARVELL_PLAT_BASE)/common/marvell_pm.c		\
+				$(MARVELL_PLAT_BASE)/common/marvell_topology.c		\
+				plat/common/plat_psci_common.c				\
+				$(MARVELL_PLAT_BASE)/common/plat_delay_timer.c		\
+				drivers/delay_timer/delay_timer.c
+
+# PSCI functionality
+$(eval $(call add_define,CONFIG_ARM64))
+
+# MSS (SCP) build
+ifeq (${MSS_SUPPORT}, 1)
+include $(MARVELL_PLAT_BASE)/common/mss/mss_common.mk
+endif
+
+fip: mrvl_flash
diff --git a/plat/marvell/common/marvell_ddr_info.c b/plat/marvell/common/marvell_ddr_info.c
new file mode 100644
index 00000000..68bff998
--- /dev/null
+++ b/plat/marvell/common/marvell_ddr_info.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <debug.h>
+#include <platform_def.h>
+#include <ddr_info.h>
+#include <mmio.h>
+
+#define DRAM_CH0_MMAP_LOW_REG(iface, cs, base)	\
+	(base + DRAM_CH0_MMAP_LOW_OFFSET + (iface) * 0x10000 + (cs) * 0x8)
+#define DRAM_CH0_MMAP_HIGH_REG(iface, cs, base)	\
+	(DRAM_CH0_MMAP_LOW_REG(iface, cs, base) + 4)
+#define DRAM_CS_VALID_ENABLED_MASK		0x1
+#define DRAM_AREA_LENGTH_OFFS			16
+#define DRAM_AREA_LENGTH_MASK			(0x1f << DRAM_AREA_LENGTH_OFFS)
+#define DRAM_START_ADDRESS_L_OFFS		23
+#define DRAM_START_ADDRESS_L_MASK		\
+					(0x1ff << DRAM_START_ADDRESS_L_OFFS)
+#define DRAM_START_ADDR_HTOL_OFFS		32
+
+#define DRAM_MAX_CS_NUM				2
+
+#define DRAM_CS_ENABLED(iface, cs, base) \
+	(mmio_read_32(DRAM_CH0_MMAP_LOW_REG(iface, cs, base)) & \
+	 DRAM_CS_VALID_ENABLED_MASK)
+#define GET_DRAM_REGION_SIZE_CODE(iface, cs, base) \
+	(mmio_read_32(DRAM_CH0_MMAP_LOW_REG(iface, cs, base)) & \
+	DRAM_AREA_LENGTH_MASK) >> DRAM_AREA_LENGTH_OFFS
+
+/* Mapping between DDR area length and real DDR size is specific and looks like
+ * bellow:
+ * 0 => 384 MB
+ * 1 => 768 MB
+ * 2 => 1536 MB
+ * 3 => 3 GB
+ * 4 => 6 GB
+ *
+ * 7 => 8 MB
+ * 8 => 16 MB
+ * 9 => 32 MB
+ * 10 => 64 MB
+ * 11 => 128 MB
+ * 12 => 256 MB
+ * 13 => 512 MB
+ * 14 => 1 GB
+ * 15 => 2 GB
+ * 16 => 4 GB
+ * 17 => 8 GB
+ * 18 => 16 GB
+ * 19 => 32 GB
+ * 20 => 64 GB
+ * 21 => 128 GB
+ * 22 => 256 GB
+ * 23 => 512 GB
+ * 24 => 1 TB
+ * 25 => 2 TB
+ * 26 => 4 TB
+ *
+ * to calculate real size we need to use two different formulas:
+ * -- GET_DRAM_REGION_SIZE_ODD for values 0-4 (DRAM_REGION_SIZE_ODD)
+ * -- GET_DRAM_REGION_SIZE_EVEN for values 7-26 (DRAM_REGION_SIZE_EVEN)
+ * using mentioned formulas we cover whole mapping between "Area length" value
+ * and real size (see above mapping).
+ */
+#define DRAM_REGION_SIZE_EVEN(C)	(((C) >= 7) && ((C) <= 26))
+#define GET_DRAM_REGION_SIZE_EVEN(C)	((uint64_t)1 << ((C) + 16))
+#define DRAM_REGION_SIZE_ODD(C)		((C) <= 4)
+#define GET_DRAM_REGION_SIZE_ODD(C)	((uint64_t)0x18000000 << (C))
+
+
+uint64_t mvebu_get_dram_size(uint64_t ap_base_addr)
+{
+	uint64_t mem_size = 0;
+	uint8_t region_code;
+	uint8_t cs, iface;
+
+	for (iface = 0; iface < DRAM_MAX_IFACE; iface++) {
+		for (cs = 0; cs < DRAM_MAX_CS_NUM; cs++) {
+
+			/* Exit loop on first disabled DRAM CS */
+			if (!DRAM_CS_ENABLED(iface, cs, ap_base_addr))
+				break;
+
+			/* Decode area length for current CS
+			 * from register value
+			 */
+			region_code =
+				GET_DRAM_REGION_SIZE_CODE(iface, cs,
+							  ap_base_addr);
+
+			if (DRAM_REGION_SIZE_EVEN(region_code)) {
+				mem_size +=
+					GET_DRAM_REGION_SIZE_EVEN(region_code);
+			} else if (DRAM_REGION_SIZE_ODD(region_code)) {
+				mem_size +=
+					GET_DRAM_REGION_SIZE_ODD(region_code);
+			} else {
+				WARN("%s: Invalid mem region (0x%x) CS#%d\n",
+				      __func__, region_code, cs);
+				return 0;
+			}
+		}
+	}
+
+	return mem_size;
+}
diff --git a/plat/marvell/common/marvell_gicv2.c b/plat/marvell/common/marvell_gicv2.c
new file mode 100644
index 00000000..ba8e4096
--- /dev/null
+++ b/plat/marvell/common/marvell_gicv2.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <gicv2.h>
+#include <plat_marvell.h>
+#include <platform.h>
+#include <platform_def.h>
+
+/*
+ * The following functions are defined as weak to allow a platform to override
+ * the way the GICv2 driver is initialised and used.
+ */
+#pragma weak plat_marvell_gic_driver_init
+#pragma weak plat_marvell_gic_init
+
+/*
+ * On a GICv2 system, the Group 1 secure interrupts are treated as Group 0
+ * interrupts.
+ */
+static const interrupt_prop_t marvell_interrupt_props[] = {
+	PLAT_MARVELL_G1S_IRQ_PROPS(GICV2_INTR_GROUP0),
+	PLAT_MARVELL_G0_IRQ_PROPS(GICV2_INTR_GROUP0)
+};
+
+static unsigned int target_mask_array[PLATFORM_CORE_COUNT];
+
+/*
+ * Ideally `marvell_gic_data` structure definition should be a `const` but it is
+ * kept as modifiable for overwriting with different GICD and GICC base when
+ * running on FVP with VE memory map.
+ */
+static gicv2_driver_data_t marvell_gic_data = {
+	.gicd_base = PLAT_MARVELL_GICD_BASE,
+	.gicc_base = PLAT_MARVELL_GICC_BASE,
+	.interrupt_props = marvell_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(marvell_interrupt_props),
+	.target_masks = target_mask_array,
+	.target_masks_num = ARRAY_SIZE(target_mask_array),
+};
+
+/*
+ * ARM common helper to initialize the GICv2 only driver.
+ */
+void plat_marvell_gic_driver_init(void)
+{
+	gicv2_driver_init(&marvell_gic_data);
+}
+
+void plat_marvell_gic_init(void)
+{
+	gicv2_distif_init();
+	gicv2_pcpu_distif_init();
+	gicv2_set_pe_target_mask(plat_my_core_pos());
+	gicv2_cpuif_enable();
+}
diff --git a/plat/marvell/common/marvell_io_storage.c b/plat/marvell/common/marvell_io_storage.c
new file mode 100644
index 00000000..cb9ece24
--- /dev/null
+++ b/plat/marvell/common/marvell_io_storage.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <assert.h>
+#include <bl_common.h>		/* For ARRAY_SIZE */
+#include <debug.h>
+#include <firmware_image_package.h>
+#include <io_driver.h>
+#include <io_fip.h>
+#include <io_memmap.h>
+#include <io_storage.h>
+#include <platform_def.h>
+#include <string.h>
+
+/* IO devices */
+static const io_dev_connector_t *fip_dev_con;
+static uintptr_t fip_dev_handle;
+static const io_dev_connector_t *memmap_dev_con;
+static uintptr_t memmap_dev_handle;
+
+static const io_block_spec_t fip_block_spec = {
+	.offset = PLAT_MARVELL_FIP_BASE,
+	.length = PLAT_MARVELL_FIP_MAX_SIZE
+};
+
+static const io_uuid_spec_t bl2_uuid_spec = {
+	.uuid = UUID_TRUSTED_BOOT_FIRMWARE_BL2,
+};
+
+static const io_uuid_spec_t scp_bl2_uuid_spec = {
+	.uuid = UUID_SCP_FIRMWARE_SCP_BL2,
+};
+
+static const io_uuid_spec_t bl31_uuid_spec = {
+	.uuid = UUID_EL3_RUNTIME_FIRMWARE_BL31,
+};
+static const io_uuid_spec_t bl32_uuid_spec = {
+	.uuid = UUID_SECURE_PAYLOAD_BL32,
+};
+static const io_uuid_spec_t bl33_uuid_spec = {
+	.uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
+};
+
+static int open_fip(const uintptr_t spec);
+static int open_memmap(const uintptr_t spec);
+
+struct plat_io_policy {
+	uintptr_t *dev_handle;
+	uintptr_t image_spec;
+	int (*check)(const uintptr_t spec);
+};
+
+/* By default, Marvell platforms load images from the FIP */
+static const struct plat_io_policy policies[] = {
+	[FIP_IMAGE_ID] = {
+		&memmap_dev_handle,
+		(uintptr_t)&fip_block_spec,
+		open_memmap
+	},
+	[BL2_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl2_uuid_spec,
+		open_fip
+	},
+	[SCP_BL2_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&scp_bl2_uuid_spec,
+		open_fip
+	},
+	[BL31_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl31_uuid_spec,
+		open_fip
+	},
+	[BL32_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl32_uuid_spec,
+		open_fip
+	},
+	[BL33_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl33_uuid_spec,
+		open_fip
+	},
+};
+
+
+/* Weak definitions may be overridden in specific ARM standard platform */
+#pragma weak plat_marvell_io_setup
+#pragma weak plat_marvell_get_alt_image_source
+
+
+static int open_fip(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	/* See if a Firmware Image Package is available */
+	result = io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_ID);
+	if (result == 0) {
+		result = io_open(fip_dev_handle, spec, &local_image_handle);
+		if (result == 0) {
+			VERBOSE("Using FIP\n");
+			io_close(local_image_handle);
+		}
+	}
+	return result;
+}
+
+
+static int open_memmap(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	result = io_dev_init(memmap_dev_handle, (uintptr_t)NULL);
+	if (result == 0) {
+		result = io_open(memmap_dev_handle, spec, &local_image_handle);
+		if (result == 0) {
+			VERBOSE("Using Memmap\n");
+			io_close(local_image_handle);
+		}
+	}
+	return result;
+}
+
+
+void marvell_io_setup(void)
+{
+	int io_result;
+
+	io_result = register_io_dev_fip(&fip_dev_con);
+	assert(io_result == 0);
+
+	io_result = register_io_dev_memmap(&memmap_dev_con);
+	assert(io_result == 0);
+
+	/* Open connections to devices and cache the handles */
+	io_result = io_dev_open(fip_dev_con, (uintptr_t)NULL,
+				&fip_dev_handle);
+	assert(io_result == 0);
+
+	io_result = io_dev_open(memmap_dev_con, (uintptr_t)NULL,
+				&memmap_dev_handle);
+	assert(io_result == 0);
+
+	/* Ignore improbable errors in release builds */
+	(void)io_result;
+}
+
+void plat_marvell_io_setup(void)
+{
+	marvell_io_setup();
+}
+
+int plat_marvell_get_alt_image_source(
+	unsigned int image_id __attribute__((unused)),
+	uintptr_t *dev_handle __attribute__((unused)),
+	uintptr_t *image_spec __attribute__((unused)))
+{
+	/* By default do not try an alternative */
+	return -ENOENT;
+}
+
+/*
+ * Return an IO device handle and specification which can be used to access
+ * an image. Use this to enforce platform load policy
+ */
+int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle,
+			  uintptr_t *image_spec)
+{
+	int result;
+	const struct plat_io_policy *policy;
+
+	assert(image_id < ARRAY_SIZE(policies));
+
+	policy = &policies[image_id];
+	result = policy->check(policy->image_spec);
+	if (result == 0) {
+		*image_spec = policy->image_spec;
+		*dev_handle = *(policy->dev_handle);
+	} else {
+		VERBOSE("Trying alternative IO\n");
+		result = plat_marvell_get_alt_image_source(image_id, dev_handle,
+						       image_spec);
+	}
+
+	return result;
+}
+
+/*
+ * See if a Firmware Image Package is available,
+ * by checking if TOC is valid or not.
+ */
+int marvell_io_is_toc_valid(void)
+{
+	int result;
+
+	result = io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_ID);
+
+	return result == 0;
+}
diff --git a/plat/marvell/common/marvell_pm.c b/plat/marvell/common/marvell_pm.c
new file mode 100644
index 00000000..2a757900
--- /dev/null
+++ b/plat/marvell/common/marvell_pm.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <psci.h>
+#include <marvell_pm.h>
+
+/* Standard ARM platforms are expected to export plat_arm_psci_pm_ops */
+extern const plat_psci_ops_t plat_arm_psci_pm_ops;
+
+/*****************************************************************************
+ * Private function to program the mailbox for a cpu before it is released
+ * from reset. This function assumes that the mail box base is within
+ * the MARVELL_SHARED_RAM region
+ *****************************************************************************
+ */
+void marvell_program_mailbox(uintptr_t address)
+{
+	uintptr_t *mailbox = (void *)PLAT_MARVELL_MAILBOX_BASE;
+
+	/*
+	 * Ensure that the PLAT_MARVELL_MAILBOX_BASE is within
+	 * MARVELL_SHARED_RAM region.
+	 */
+	assert((PLAT_MARVELL_MAILBOX_BASE >= MARVELL_SHARED_RAM_BASE) &&
+	       ((PLAT_MARVELL_MAILBOX_BASE + sizeof(*mailbox)) <=
+	       (MARVELL_SHARED_RAM_BASE + MARVELL_SHARED_RAM_SIZE)));
+
+	mailbox[MBOX_IDX_MAGIC] = MVEBU_MAILBOX_MAGIC_NUM;
+	mailbox[MBOX_IDX_SEC_ADDR] = address;
+
+	/* Flush data cache if the mail box shared RAM is cached */
+#if PLAT_MARVELL_SHARED_RAM_CACHED
+	flush_dcache_range((uintptr_t)PLAT_MARVELL_MAILBOX_BASE +
+			   8 * MBOX_IDX_MAGIC,
+			   2 * sizeof(uint64_t));
+#endif
+}
+
+/*****************************************************************************
+ * The ARM Standard platform definition of platform porting API
+ * `plat_setup_psci_ops`.
+ *****************************************************************************
+ */
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+			const plat_psci_ops_t **psci_ops)
+{
+	*psci_ops = &plat_arm_psci_pm_ops;
+
+	/* Setup mailbox with entry point. */
+	marvell_program_mailbox(sec_entrypoint);
+	return 0;
+}
diff --git a/plat/marvell/common/marvell_topology.c b/plat/marvell/common/marvell_topology.c
new file mode 100644
index 00000000..a40ff6f5
--- /dev/null
+++ b/plat/marvell/common/marvell_topology.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <plat_marvell.h>
+
+/* The power domain tree descriptor */
+unsigned char marvell_power_domain_tree_desc[PLAT_MARVELL_CLUSTER_COUNT + 1];
+
+/*****************************************************************************
+ * This function dynamically constructs the topology according to
+ * PLAT_MARVELL_CLUSTER_COUNT and returns it.
+ *****************************************************************************
+ */
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	int i;
+
+	/*
+	 * The power domain tree does not have a single system level power
+	 * domain i.e. a single root node. The first entry in the power domain
+	 * descriptor specifies the number of power domains at the highest power
+	 * level.
+	 * For Marvell Platform this is the number of cluster power domains.
+	 */
+	marvell_power_domain_tree_desc[0] = PLAT_MARVELL_CLUSTER_COUNT;
+
+	for (i = 0; i < PLAT_MARVELL_CLUSTER_COUNT; i++)
+		marvell_power_domain_tree_desc[i + 1] =
+					PLAT_MARVELL_CLUSTER_CORE_COUNT;
+
+	return marvell_power_domain_tree_desc;
+}
+
+/*****************************************************************************
+ * This function validates an MPIDR by checking whether it falls within the
+ * acceptable bounds. An error code (-1) is returned if an incorrect mpidr
+ * is passed.
+ *****************************************************************************
+ */
+int marvell_check_mpidr(u_register_t mpidr)
+{
+	unsigned int nb_id, cluster_id, cpu_id;
+
+	mpidr &= MPIDR_AFFINITY_MASK;
+
+	if (mpidr & ~(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK |
+	    MPIDR_AFFLVL_MASK << MPIDR_AFF2_SHIFT))
+		return -1;
+
+	/* Get north bridge ID */
+	nb_id = MPIDR_AFFLVL3_VAL(mpidr);
+	cluster_id = MPIDR_AFFLVL1_VAL(mpidr);
+	cpu_id = MPIDR_AFFLVL0_VAL(mpidr);
+
+	if (nb_id >= PLAT_MARVELL_CLUSTER_COUNT)
+		return -1;
+
+	if (cluster_id >= PLAT_MARVELL_CLUSTER_COUNT)
+		return -1;
+
+	if (cpu_id >= PLAT_MARVELL_CLUSTER_CORE_COUNT)
+		return -1;
+
+	return 0;
+}
+
+/*****************************************************************************
+ * This function implements a part of the critical interface between the PSCI
+ * generic layer and the platform that allows the former to query the platform
+ * to convert an MPIDR to a unique linear index. An error code (-1) is returned
+ * in case the MPIDR is invalid.
+ *****************************************************************************
+ */
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+	if (marvell_check_mpidr(mpidr) == -1)
+		return -1;
+
+	return plat_marvell_calc_core_pos(mpidr);
+}
diff --git a/plat/marvell/common/mrvl_sip_svc.c b/plat/marvell/common/mrvl_sip_svc.c
new file mode 100644
index 00000000..ec293afa
--- /dev/null
+++ b/plat/marvell/common/mrvl_sip_svc.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <ap_setup.h>
+#include <cache_llc.h>
+#include <debug.h>
+#include <marvell_plat_priv.h>
+#include <runtime_svc.h>
+#include <smcc.h>
+#include "comphy/phy-comphy-cp110.h"
+
+/* #define DEBUG_COMPHY */
+#ifdef DEBUG_COMPHY
+#define debug(format...) NOTICE(format)
+#else
+#define debug(format, arg...)
+#endif
+
+/* Comphy related FID's */
+#define MV_SIP_COMPHY_POWER_ON	0x82000001
+#define MV_SIP_COMPHY_POWER_OFF	0x82000002
+#define MV_SIP_COMPHY_PLL_LOCK	0x82000003
+#define MV_SIP_COMPHY_XFI_TRAIN	0x82000004
+#define MV_SIP_COMPHY_DIG_RESET	0x82000005
+
+/* Miscellaneous FID's' */
+#define MV_SIP_DRAM_SIZE	0x82000010
+#define MV_SIP_LLC_ENABLE	0x82000011
+
+#define MAX_LANE_NR		6
+#define MVEBU_COMPHY_OFFSET	0x441000
+#define MVEBU_SD_OFFSET		0x120000
+
+/* This macro is used to identify COMPHY related calls from SMC function ID */
+#define is_comphy_fid(fid)	\
+	((fid) >= MV_SIP_COMPHY_POWER_ON && (fid) <= MV_SIP_COMPHY_DIG_RESET)
+
+
+uintptr_t mrvl_sip_smc_handler(uint32_t smc_fid,
+			       u_register_t x1,
+			       u_register_t x2,
+			       u_register_t x3,
+			       u_register_t x4,
+			       void *cookie,
+			       void *handle,
+			       u_register_t flags)
+{
+	u_register_t ret;
+	int i;
+
+	debug("%s: got SMC (0x%x) x1 0x%lx, x2 0x%lx, x3 0x%lx\n",
+						 __func__, smc_fid, x1, x2, x3);
+	if (is_comphy_fid(smc_fid)) {
+
+		/* some systems passes SD phys address instead of COMPHY phys
+		 * address - convert it
+		 */
+		if (x1 & MVEBU_SD_OFFSET)
+			x1 = (x1 & ~0xffffff) + MVEBU_COMPHY_OFFSET;
+
+		if ((x1 & 0xffffff) != MVEBU_COMPHY_OFFSET) {
+			ERROR("%s: Wrong smc (0x%x) address: %lx\n",
+			      __func__, smc_fid, x1);
+			SMC_RET1(handle, SMC_UNK);
+		}
+
+		if (x2 >= MAX_LANE_NR) {
+			ERROR("%s: Wrong smc (0x%x) lane nr: %lx\n",
+			      __func__, smc_fid, x2);
+			SMC_RET1(handle, SMC_UNK);
+		}
+	}
+
+	switch (smc_fid) {
+
+	/* Comphy related FID's */
+	case MV_SIP_COMPHY_POWER_ON:
+		/* x1:  comphy_base, x2: comphy_index, x3: comphy_mode */
+		ret = mvebu_cp110_comphy_power_on(x1, x2, x3);
+		SMC_RET1(handle, ret);
+	case MV_SIP_COMPHY_POWER_OFF:
+		/* x1:  comphy_base, x2: comphy_index */
+		ret = mvebu_cp110_comphy_power_off(x1, x2);
+		SMC_RET1(handle, ret);
+	case MV_SIP_COMPHY_PLL_LOCK:
+		/* x1:  comphy_base, x2: comphy_index */
+		ret = mvebu_cp110_comphy_is_pll_locked(x1, x2);
+		SMC_RET1(handle, ret);
+	case MV_SIP_COMPHY_XFI_TRAIN:
+		/* x1:  comphy_base, x2: comphy_index */
+		ret = mvebu_cp110_comphy_xfi_rx_training(x1, x2);
+		SMC_RET1(handle, ret);
+	case MV_SIP_COMPHY_DIG_RESET:
+		/* x1:  comphy_base, x2: comphy_index, x3: mode, x4: command */
+		ret = mvebu_cp110_comphy_digital_reset(x1, x2, x3, x4);
+		SMC_RET1(handle, ret);
+
+	/* Miscellaneous FID's' */
+	case MV_SIP_DRAM_SIZE:
+		/* x1:  ap_base_addr */
+		ret = mvebu_get_dram_size(x1);
+		SMC_RET1(handle, ret);
+	case MV_SIP_LLC_ENABLE:
+		for (i = 0; i < ap_get_count(); i++)
+			llc_runtime_enable(i);
+
+		SMC_RET1(handle, 0);
+
+	default:
+		ERROR("%s: unhandled SMC (0x%x)\n", __func__, smc_fid);
+		SMC_RET1(handle, SMC_UNK);
+	}
+}
+
+/* Define a runtime service descriptor for fast SMC calls */
+DECLARE_RT_SVC(
+	marvell_sip_svc,
+	OEN_SIP_START,
+	OEN_SIP_END,
+	SMC_TYPE_FAST,
+	NULL,
+	mrvl_sip_smc_handler
+);
diff --git a/plat/marvell/common/mss/mss_common.mk b/plat/marvell/common/mss/mss_common.mk
new file mode 100644
index 00000000..898b6dcc
--- /dev/null
+++ b/plat/marvell/common/mss/mss_common.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:     BSD-3-Clause
+# https://spdx.org/licenses
+#
+
+
+PLAT_MARVELL		:= 	plat/marvell
+MSS_SOURCE		:= 	$(PLAT_MARVELL)/common/mss
+
+BL2_SOURCES		+=	$(MSS_SOURCE)/mss_scp_bootloader.c		\
+				$(PLAT_MARVELL)/common/plat_delay_timer.c	\
+				drivers/delay_timer/delay_timer.c		\
+				$(MARVELL_DRV)					\
+				$(PLAT_FAMILY_BASE)/$(PLAT)/board/marvell_plat_config.c
+
+BL31_SOURCES		+=	$(MSS_SOURCE)/mss_ipc_drv.c
+
+PLAT_INCLUDES           +=      -I$(MSS_SOURCE)
diff --git a/plat/marvell/common/mss/mss_ipc_drv.c b/plat/marvell/common/mss/mss_ipc_drv.c
new file mode 100644
index 00000000..731c315b
--- /dev/null
+++ b/plat/marvell/common/mss/mss_ipc_drv.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <plat_marvell.h>
+#include <debug.h>
+#include <string.h>
+#include <mss_ipc_drv.h>
+#include <mmio.h>
+
+#define IPC_MSG_BASE_MASK		MVEBU_REGS_BASE_MASK
+
+#define IPC_CH_NUM_OF_MSG		(16)
+#define IPC_CH_MSG_IDX			(-1)
+
+unsigned long mv_pm_ipc_msg_base;
+unsigned int  mv_pm_ipc_queue_size;
+
+unsigned int msg_sync;
+int msg_index = IPC_CH_MSG_IDX;
+
+/******************************************************************************
+ * mss_pm_ipc_init
+ *
+ * DESCRIPTION: Initialize PM IPC infrastructure
+ ******************************************************************************
+ */
+int mv_pm_ipc_init(unsigned long ipc_control_addr)
+{
+	struct mss_pm_ipc_ctrl *ipc_control =
+			(struct mss_pm_ipc_ctrl *)ipc_control_addr;
+
+	/* Initialize PM IPC control block */
+	mv_pm_ipc_msg_base     = ipc_control->msg_base_address |
+				 IPC_MSG_BASE_MASK;
+	mv_pm_ipc_queue_size   = ipc_control->queue_size;
+
+	return 0;
+}
+
+/******************************************************************************
+ * mv_pm_ipc_queue_addr_get
+ *
+ * DESCRIPTION: Returns the IPC queue address
+ ******************************************************************************
+ */
+unsigned int mv_pm_ipc_queue_addr_get(void)
+{
+	unsigned int addr;
+
+	inv_dcache_range((uint64_t)&msg_index, sizeof(msg_index));
+	msg_index = msg_index + 1;
+	if (msg_index >= IPC_CH_NUM_OF_MSG)
+		msg_index = 0;
+
+	addr = (unsigned int)(mv_pm_ipc_msg_base +
+	       (msg_index * mv_pm_ipc_queue_size));
+
+	flush_dcache_range((uint64_t)&msg_index, sizeof(msg_index));
+
+	return addr;
+}
+
+/******************************************************************************
+ * mv_pm_ipc_msg_rx
+ *
+ * DESCRIPTION: Retrieve message from IPC channel
+ ******************************************************************************
+ */
+int mv_pm_ipc_msg_rx(unsigned int channel_id, struct mss_pm_ipc_msg *msg)
+{
+	unsigned int addr = mv_pm_ipc_queue_addr_get();
+
+	msg->msg_reply = mmio_read_32(addr + IPC_MSG_REPLY_LOC);
+
+	return 0;
+}
+
+/******************************************************************************
+ * mv_pm_ipc_msg_tx
+ *
+ * DESCRIPTION: Send message via IPC channel
+ ******************************************************************************
+ */
+int mv_pm_ipc_msg_tx(unsigned int channel_id, unsigned int msg_id,
+					unsigned int cluster_power_state)
+{
+	unsigned int addr = mv_pm_ipc_queue_addr_get();
+
+	/* Validate the entry for message placed by the host is free */
+	if (mmio_read_32(addr + IPC_MSG_STATE_LOC) == IPC_MSG_FREE) {
+		inv_dcache_range((uint64_t)&msg_sync, sizeof(msg_sync));
+		msg_sync = msg_sync + 1;
+		flush_dcache_range((uint64_t)&msg_sync, sizeof(msg_sync));
+
+		mmio_write_32(addr + IPC_MSG_SYNC_ID_LOC, msg_sync);
+		mmio_write_32(addr + IPC_MSG_ID_LOC, msg_id);
+		mmio_write_32(addr + IPC_MSG_CPU_ID_LOC, channel_id);
+		mmio_write_32(addr + IPC_MSG_POWER_STATE_LOC,
+			      cluster_power_state);
+		mmio_write_32(addr + IPC_MSG_STATE_LOC, IPC_MSG_OCCUPY);
+
+	} else {
+		ERROR("%s: FAILED\n", __func__);
+	}
+
+	return 0;
+}
diff --git a/plat/marvell/common/mss/mss_ipc_drv.h b/plat/marvell/common/mss/mss_ipc_drv.h
new file mode 100644
index 00000000..28eb907e
--- /dev/null
+++ b/plat/marvell/common/mss/mss_ipc_drv.h
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PM_IPC_DRV_H
+#define __PM_IPC_DRV_H
+
+#include <psci.h>
+
+#define MV_PM_FW_IPC_VERSION_MAGIC	(0xCA530000) /* Do NOT change */
+/* Increament for each version */
+#define MV_PM_FW_IPC_VERSION_SEQ	(0x00000001)
+#define MV_PM_FW_IPC_VERSION		(MV_PM_FW_IPC_VERSION_MAGIC | \
+					 MV_PM_FW_IPC_VERSION_SEQ)
+
+#define IPC_MSG_STATE_LOC		(0x0)
+#define IPC_MSG_SYNC_ID_LOC		(0x4)
+#define IPC_MSG_ID_LOC			(0x8)
+#define IPC_MSG_RET_CH_ID_LOC	(0xC)
+#define IPC_MSG_CPU_ID_LOC		(0x10)
+#define IPC_MSG_CLUSTER_ID_LOC	(0x14)
+#define IPC_MSG_SYSTEM_ID_LOC	(0x18)
+#define IPC_MSG_POWER_STATE_LOC	(0x1C)
+#define IPC_MSG_REPLY_LOC		(0x20)
+#define IPC_MSG_RESERVED_LOC	(0x24)
+
+/* IPC initialization state */
+enum mss_pm_ipc_init_state {
+	IPC_UN_INITIALIZED	= 1,
+	IPC_INITIALIZED		= 2
+};
+
+/* IPC queue direction */
+enum mss_pm_ipc_init_msg_dir {
+	IPC_MSG_TX	= 0,
+	IPC_MSG_RX	= 1
+};
+
+/* IPC message state */
+enum mss_pm_ipc_msg_state {
+	IPC_MSG_FREE	= 1,
+	IPC_MSG_OCCUPY	= 2
+
+};
+
+/* IPC control block */
+struct mss_pm_ipc_ctrl {
+	unsigned int ctrl_base_address;
+	unsigned int msg_base_address;
+	unsigned int num_of_channels;
+	unsigned int channel_size;
+	unsigned int queue_size;
+};
+
+/* IPC message types */
+enum mss_pm_msg_id {
+	PM_IPC_MSG_CPU_SUSPEND		= 1,
+	PM_IPC_MSG_CPU_OFF		= 2,
+	PM_IPC_MSG_CPU_ON		= 3,
+	PM_IPC_MSG_SYSTEM_RESET		= 4,
+	PM_IPC_MSG_SYSTEM_SUSPEND	= 5,
+	PM_IPC_MAX_MSG
+};
+
+struct mss_pm_ipc_msg {
+	unsigned int	msg_sync_id;	/*
+					 * Sync number, validate message
+					 * reply corresponding to message
+					 * received
+					 */
+	unsigned int	msg_id;		/* Message Id */
+	unsigned int	ret_channel_id;	/* IPC channel reply */
+	unsigned int	cpu_id;		/* CPU Id */
+	unsigned int	cluster_id;	/* Cluster Id */
+	unsigned int	system_id;	/* System Id */
+	unsigned int	power_state;
+	unsigned int	msg_reply;	/* Message reply */
+};
+
+/* IPC queue */
+struct mss_pm_ipc_queue {
+	unsigned int	state;
+	struct mss_pm_ipc_msg		msg;
+};
+
+/* IPC channel */
+struct mss_pm_ipc_ch {
+	struct mss_pm_ipc_queue *tx_queue;
+	struct mss_pm_ipc_queue *rx_queue;
+};
+
+/*****************************************************************************
+ * mv_pm_ipc_init
+ *
+ * DESCRIPTION: Initialize PM IPC infrastructure
+ *****************************************************************************
+ */
+int mv_pm_ipc_init(unsigned long ipc_control_addr);
+
+/*****************************************************************************
+ * mv_pm_ipc_msg_rx
+ *
+ * DESCRIPTION: Retrieve message from IPC channel
+ *****************************************************************************
+ */
+int mv_pm_ipc_msg_rx(unsigned int channel_id, struct mss_pm_ipc_msg *msg);
+
+/*****************************************************************************
+ * mv_pm_ipc_msg_tx
+ *
+ * DESCRIPTION: Send message via IPC channel
+ *****************************************************************************
+ */
+int mv_pm_ipc_msg_tx(unsigned int channel_id, unsigned int msg_id,
+			unsigned int cluster_power_state);
+
+#endif /* __PM_IPC_DRV_H */
diff --git a/plat/marvell/common/mss/mss_mem.h b/plat/marvell/common/mss/mss_mem.h
new file mode 100644
index 00000000..efff59e6
--- /dev/null
+++ b/plat/marvell/common/mss/mss_mem.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MSS_PM_MEM_H
+#define __MSS_PM_MEM_H
+
+/* MSS SRAM Memory base */
+#define MSS_SRAM_PM_CONTROL_BASE		(MVEBU_REGS_BASE + 0x520000)
+
+enum mss_pm_ctrl_handshake {
+	MSS_UN_INITIALIZED	= 0,
+	MSS_COMPATIBILITY_ERROR	= 1,
+	MSS_ACKNOWLEDGMENT	= 2,
+	HOST_ACKNOWLEDGMENT	= 3
+};
+
+enum mss_pm_ctrl_rtos_env {
+	MSS_MULTI_PROCESS_ENV	= 0,
+	MSS_SINGLE_PROCESS_ENV	= 1,
+	MSS_MAX_PROCESS_ENV
+};
+
+struct mss_pm_ctrl_block {
+	/* This field is used to synchronize the Host
+	 * and MSS initialization sequence
+	 * Valid Values
+	 * 0 - Un-Initialized
+	 * 1 - Compatibility Error
+	 * 2 - MSS Acknowledgment
+	 * 3 - Host Acknowledgment
+	 */
+	unsigned int handshake;
+
+	/*
+	 * This field include Host IPC version. Once received by the MSS
+	 * It will be compared to MSS IPC version and set MSS Acknowledge to
+	 * "compatibility error" in case there is no match
+	 */
+	unsigned int ipc_version;
+	unsigned int ipc_base_address;
+	unsigned int ipc_state;
+
+	/* Following fields defines firmware core architecture */
+	unsigned int num_of_cores;
+	unsigned int num_of_clusters;
+	unsigned int num_of_cores_per_cluster;
+
+	/* Following fields define pm trace debug base address */
+	unsigned int pm_trace_ctrl_base_address;
+	unsigned int pm_trace_info_base_address;
+	unsigned int pm_trace_info_core_size;
+
+	unsigned int ctrl_blk_size;
+};
+
+#endif /* __MSS_PM_MEM_H */
diff --git a/plat/marvell/common/mss/mss_scp_bl2_format.h b/plat/marvell/common/mss/mss_scp_bl2_format.h
new file mode 100644
index 00000000..c04df727
--- /dev/null
+++ b/plat/marvell/common/mss/mss_scp_bl2_format.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MSS_SCP_BL2_FORMAT_H
+#define __MSS_SCP_BL2_FORMAT_H
+
+#define MAX_NR_OF_FILES	5
+#define FILE_MAGIC	0xddd01ff
+#define HEADER_VERSION	0x1
+
+#define MSS_IDRAM_SIZE	0x10000 /* 64KB */
+#define MG_SRAM_SIZE	0x20000 /* 128KB */
+
+/* Types definitions */
+typedef struct file_header {
+	/* Magic specific for concatenated file (used for validation) */
+	uint32_t magic;
+	uint32_t nr_of_imgs;	/* Number of images concatenated */
+} file_header_t;
+
+/* Types definitions */
+enum cm3_t {
+	MSS_AP,
+	MSS_CP0,
+	MSS_CP1,
+	MSS_CP2,
+	MSS_CP3,
+	MG_CP0,
+	MG_CP1,
+};
+
+typedef struct img_header {
+	uint32_t type;		/* CM3 type, can be one of cm3_t */
+	uint32_t length;	/* Image length */
+	uint32_t version;	/* For sanity checks and future
+				 * extended functionality
+				 */
+} img_header_t;
+
+#endif /* __MSS_SCP_BL2_FORMAT_H */
diff --git a/plat/marvell/common/mss/mss_scp_bootloader.c b/plat/marvell/common/mss/mss_scp_bootloader.c
new file mode 100644
index 00000000..334fcfc6
--- /dev/null
+++ b/plat/marvell/common/mss/mss_scp_bootloader.c
@@ -0,0 +1,308 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <assert.h>
+#include <debug.h>
+#include <mmio.h>
+#include <arch_helpers.h> /* for cache maintanance operations */
+#include <platform_def.h>
+#include <delay_timer.h>
+
+#include <plat_pm_trace.h>
+#include <mss_scp_bootloader.h>
+#include <mss_ipc_drv.h>
+#include <mss_mem.h>
+#include <mss_scp_bl2_format.h>
+
+#define MSS_DMA_SRCBR(base)		(base + 0xC0)
+#define MSS_DMA_DSTBR(base)		(base + 0xC4)
+#define MSS_DMA_CTRLR(base)		(base + 0xC8)
+#define MSS_M3_RSTCR(base)		(base + 0xFC)
+
+#define MSS_DMA_CTRLR_SIZE_OFFSET	(0)
+#define MSS_DMA_CTRLR_REQ_OFFSET	(15)
+#define MSS_DMA_CTRLR_REQ_SET		(1)
+#define MSS_DMA_CTRLR_ACK_OFFSET	(12)
+#define MSS_DMA_CTRLR_ACK_MASK		(0x1)
+#define MSS_DMA_CTRLR_ACK_READY		(1)
+#define MSS_M3_RSTCR_RST_OFFSET		(0)
+#define MSS_M3_RSTCR_RST_OFF		(1)
+
+#define MSS_DMA_TIMEOUT			1000
+#define MSS_EXTERNAL_SPACE		0x50000000
+#define MSS_EXTERNAL_ADDR_MASK		0xfffffff
+
+#define DMA_SIZE			128
+
+#define MSS_HANDSHAKE_TIMEOUT		50
+
+static int mss_check_image_ready(volatile struct mss_pm_ctrl_block *mss_pm_crtl)
+{
+	int timeout = MSS_HANDSHAKE_TIMEOUT;
+
+	/* Wait for SCP to signal it's ready */
+	while ((mss_pm_crtl->handshake != MSS_ACKNOWLEDGMENT) &&
+						(timeout-- > 0))
+		mdelay(1);
+
+	if (mss_pm_crtl->handshake != MSS_ACKNOWLEDGMENT)
+		return -1;
+
+	mss_pm_crtl->handshake = HOST_ACKNOWLEDGMENT;
+
+	return 0;
+}
+
+static int mss_image_load(uint32_t src_addr, uint32_t size, uintptr_t mss_regs)
+{
+	uint32_t i, loop_num, timeout;
+
+	/* Check if the img size is not bigger than ID-RAM size of MSS CM3 */
+	if (size > MSS_IDRAM_SIZE) {
+		ERROR("image is too big to fit into MSS CM3 memory\n");
+		return 1;
+	}
+
+	NOTICE("Loading MSS image from addr. 0x%x Size 0x%x to MSS at 0x%lx\n",
+	       src_addr, size, mss_regs);
+	/* load image to MSS RAM using DMA */
+	loop_num = (size / DMA_SIZE) + (((size & (DMA_SIZE - 1)) == 0) ? 0 : 1);
+
+	for (i = 0; i < loop_num; i++) {
+		/* write destination and source addresses */
+		mmio_write_32(MSS_DMA_SRCBR(mss_regs),
+			      MSS_EXTERNAL_SPACE |
+			      ((src_addr & MSS_EXTERNAL_ADDR_MASK) +
+			      (i * DMA_SIZE)));
+		mmio_write_32(MSS_DMA_DSTBR(mss_regs), (i * DMA_SIZE));
+
+		dsb(); /* make sure DMA data is ready before triggering it */
+
+		/* set the DMA control register */
+		mmio_write_32(MSS_DMA_CTRLR(mss_regs), ((MSS_DMA_CTRLR_REQ_SET
+			      << MSS_DMA_CTRLR_REQ_OFFSET) |
+			      (DMA_SIZE << MSS_DMA_CTRLR_SIZE_OFFSET)));
+
+		/* Poll DMA_ACK at MSS_DMACTLR until it is ready */
+		timeout = MSS_DMA_TIMEOUT;
+		while (timeout) {
+			if ((mmio_read_32(MSS_DMA_CTRLR(mss_regs)) >>
+			     MSS_DMA_CTRLR_ACK_OFFSET & MSS_DMA_CTRLR_ACK_MASK)
+				== MSS_DMA_CTRLR_ACK_READY) {
+				break;
+			}
+
+			udelay(50);
+			timeout--;
+		}
+
+		if (timeout == 0) {
+			ERROR("\nDMA failed to load MSS image\n");
+			return 1;
+		}
+	}
+
+	bl2_plat_configure_mss_windows(mss_regs);
+
+	/* Release M3 from reset */
+	mmio_write_32(MSS_M3_RSTCR(mss_regs), (MSS_M3_RSTCR_RST_OFF <<
+		      MSS_M3_RSTCR_RST_OFFSET));
+
+	NOTICE("Done\n");
+
+	return 0;
+}
+
+/* Load image to MSS AP and do PM related initialization
+ * Note that this routine is different than other CM3 loading routines, because
+ * firmware for AP is dedicated for PM and therefore some additional PM
+ * initialization is required
+ */
+static int mss_ap_load_image(uintptr_t single_img,
+			     uint32_t image_size, uint32_t ap_idx)
+{
+	volatile struct mss_pm_ctrl_block *mss_pm_crtl;
+	int ret;
+
+	/* TODO: add PM Control Info from platform */
+	mss_pm_crtl = (struct mss_pm_ctrl_block *)MSS_SRAM_PM_CONTROL_BASE;
+	mss_pm_crtl->ipc_version                = MV_PM_FW_IPC_VERSION;
+	mss_pm_crtl->num_of_clusters            = PLAT_MARVELL_CLUSTER_COUNT;
+	mss_pm_crtl->num_of_cores_per_cluster   =
+						PLAT_MARVELL_CLUSTER_CORE_COUNT;
+	mss_pm_crtl->num_of_cores               = PLAT_MARVELL_CLUSTER_COUNT *
+						PLAT_MARVELL_CLUSTER_CORE_COUNT;
+	mss_pm_crtl->pm_trace_ctrl_base_address = AP_MSS_ATF_CORE_CTRL_BASE;
+	mss_pm_crtl->pm_trace_info_base_address = AP_MSS_ATF_CORE_INFO_BASE;
+	mss_pm_crtl->pm_trace_info_core_size    = AP_MSS_ATF_CORE_INFO_SIZE;
+	VERBOSE("MSS Control Block = 0x%x\n", MSS_SRAM_PM_CONTROL_BASE);
+	VERBOSE("mss_pm_crtl->ipc_version                = 0x%x\n",
+		mss_pm_crtl->ipc_version);
+	VERBOSE("mss_pm_crtl->num_of_cores               = 0x%x\n",
+		mss_pm_crtl->num_of_cores);
+	VERBOSE("mss_pm_crtl->num_of_clusters            = 0x%x\n",
+		mss_pm_crtl->num_of_clusters);
+	VERBOSE("mss_pm_crtl->num_of_cores_per_cluster   = 0x%x\n",
+		mss_pm_crtl->num_of_cores_per_cluster);
+	VERBOSE("mss_pm_crtl->pm_trace_ctrl_base_address = 0x%x\n",
+		mss_pm_crtl->pm_trace_ctrl_base_address);
+	VERBOSE("mss_pm_crtl->pm_trace_info_base_address = 0x%x\n",
+		mss_pm_crtl->pm_trace_info_base_address);
+	VERBOSE("mss_pm_crtl->pm_trace_info_core_size    = 0x%x\n",
+		mss_pm_crtl->pm_trace_info_core_size);
+
+	/* TODO: add checksum to image */
+	VERBOSE("Send info about the SCP_BL2 image to be transferred to SCP\n");
+
+	ret = mss_image_load(single_img, image_size,
+			     bl2_plat_get_ap_mss_regs(ap_idx));
+	if (ret != 0) {
+		ERROR("SCP Image load failed\n");
+		return -1;
+	}
+
+	/* check that the image was loaded successfully */
+	ret = mss_check_image_ready(mss_pm_crtl);
+	if (ret != 0)
+		NOTICE("SCP Image doesn't contain PM firmware\n");
+
+	return 0;
+}
+
+/* Load CM3 image (single_img) to CM3 pointed by cm3_type */
+static int load_img_to_cm3(enum cm3_t cm3_type,
+			   uintptr_t single_img, uint32_t image_size)
+{
+	int ret, ap_idx, cp_index;
+	uint32_t ap_count = bl2_plat_get_ap_count();
+
+	switch (cm3_type) {
+	case MSS_AP:
+		for (ap_idx = 0; ap_idx < ap_count; ap_idx++) {
+			NOTICE("Load image to AP%d MSS\n", ap_idx);
+			ret = mss_ap_load_image(single_img, image_size, ap_idx);
+			if (ret != 0)
+				return ret;
+		}
+		break;
+	case MSS_CP0:
+	case MSS_CP1:
+	case MSS_CP2:
+	case MSS_CP3:
+		/* MSS_AP = 0
+		 * MSS_CP1 = 1
+		 * .
+		 * .
+		 * MSS_CP3 = 4
+		 * Actual CP index is MSS_CPX - 1
+		 */
+		cp_index = cm3_type - 1;
+		for (ap_idx = 0; ap_idx < ap_count; ap_idx++) {
+			/* Check if we should load this image
+			 * according to number of CPs
+			 */
+			if (bl2_plat_get_cp_count(ap_idx) <= cp_index) {
+				NOTICE("Skipping MSS CP%d related image\n",
+				       cp_index);
+				break;
+			}
+
+			NOTICE("Load image to CP%d MSS AP%d\n",
+			       cp_index, ap_idx);
+			ret = mss_image_load(single_img, image_size,
+					     bl2_plat_get_cp_mss_regs(
+						     ap_idx, cp_index));
+			if (ret != 0) {
+				ERROR("SCP Image load failed\n");
+				return -1;
+			}
+		}
+		break;
+	case MG_CP0:
+		/* TODO: */
+		NOTICE("Load image to CP0 MG not supported\n");
+		break;
+	case MG_CP1:
+		/* TODO: */
+		NOTICE("Load image to CP1 MG not supported\n");
+		break;
+	default:
+		ERROR("SCP_BL2 wrong img format (cm3_type=%d)\n", cm3_type);
+		break;
+	}
+
+	return 0;
+}
+
+/* The Armada 8K has 5 service CPUs and Armada 7K has 3. Therefore it was
+ * required to provide a method for loading firmware to all of the service CPUs.
+ * To achieve that, the scp_bl2 image in fact is file containing up to 5
+ * concatenated firmwares and this routine splits concatenated image into single
+ * images dedicated for appropriate service CPU and then load them.
+ */
+static int split_and_load_bl2_image(void *image)
+{
+	file_header_t *file_hdr;
+	img_header_t *img_hdr;
+	uintptr_t single_img;
+	int i;
+
+	file_hdr = (file_header_t *)image;
+
+	if (file_hdr->magic != FILE_MAGIC) {
+		ERROR("SCP_BL2 wrong img format\n");
+		return -1;
+	}
+
+	if (file_hdr->nr_of_imgs > MAX_NR_OF_FILES) {
+		ERROR("SCP_BL2 concatenated image contains to many images\n");
+		return -1;
+	}
+
+	img_hdr = (img_header_t *)((uintptr_t)image + sizeof(file_header_t));
+	single_img = (uintptr_t)image + sizeof(file_header_t) +
+				    sizeof(img_header_t) * file_hdr->nr_of_imgs;
+
+	NOTICE("SCP_BL2 contains %d concatenated images\n",
+							  file_hdr->nr_of_imgs);
+	for (i = 0; i < file_hdr->nr_of_imgs; i++) {
+
+		/* Before loading make sanity check on header */
+		if (img_hdr->version != HEADER_VERSION) {
+			ERROR("Wrong header, img corrupted exiting\n");
+			return -1;
+		}
+
+		load_img_to_cm3(img_hdr->type, single_img, img_hdr->length);
+
+		/* Prepare offsets for next run */
+		single_img += img_hdr->length;
+		img_hdr++;
+	}
+
+	return 0;
+}
+
+int scp_bootloader_transfer(void *image, unsigned int image_size)
+{
+#ifdef SCP_BL2_BASE
+	assert((uintptr_t) image == SCP_BL2_BASE);
+#endif
+
+	VERBOSE("Concatenated img size %d\n", image_size);
+
+	if (image_size == 0) {
+		ERROR("SCP_BL2 image size can't be 0 (current size = 0x%x)\n",
+								    image_size);
+		return -1;
+	}
+
+	if (split_and_load_bl2_image(image))
+		return -1;
+
+	return 0;
+}
diff --git a/plat/marvell/common/mss/mss_scp_bootloader.h b/plat/marvell/common/mss/mss_scp_bootloader.h
new file mode 100644
index 00000000..67c387a0
--- /dev/null
+++ b/plat/marvell/common/mss/mss_scp_bootloader.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MSS_SCP_BOOTLOADER_H__
+#define __MSS_SCP_BOOTLOADER_H__
+
+int scp_bootloader_transfer(void *image, unsigned int image_size);
+uintptr_t bl2_plat_get_cp_mss_regs(int ap_idx, int cp_idx);
+uintptr_t bl2_plat_get_ap_mss_regs(int ap_idx);
+uint32_t bl2_plat_get_cp_count(int ap_idx);
+uint32_t bl2_plat_get_ap_count(void);
+void bl2_plat_configure_mss_windows(uintptr_t mss_regs);
+int bl2_plat_mss_check_image_ready(void);
+
+#endif /* __MSS_SCP_BOOTLOADER_H__ */
diff --git a/plat/marvell/common/plat_delay_timer.c b/plat/marvell/common/plat_delay_timer.c
new file mode 100644
index 00000000..dfc77c7f
--- /dev/null
+++ b/plat/marvell/common/plat_delay_timer.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch_helpers.h>
+#include <delay_timer.h>
+#include <mvebu_def.h>
+
+#define SYS_COUNTER_FREQ_IN_MHZ	(COUNTER_FREQUENCY/1000000)
+
+static uint32_t plat_get_timer_value(void)
+{
+	/*
+	 * Generic delay timer implementation expects the timer to be a down
+	 * counter. We apply bitwise NOT operator to the tick values returned
+	 * by read_cntpct_el0() to simulate the down counter.
+	 */
+	return (uint32_t)(~read_cntpct_el0());
+}
+
+static const timer_ops_t plat_timer_ops = {
+	.get_timer_value	= plat_get_timer_value,
+	.clk_mult		= 1,
+	.clk_div		= SYS_COUNTER_FREQ_IN_MHZ
+};
+
+void plat_delay_timer_init(void)
+{
+	timer_init(&plat_timer_ops);
+}
diff --git a/plat/marvell/marvell.mk b/plat/marvell/marvell.mk
new file mode 100644
index 00000000..217ad46f
--- /dev/null
+++ b/plat/marvell/marvell.mk
@@ -0,0 +1,53 @@
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:     BSD-3-Clause
+# https://spdx.org/licenses
+
+# Marvell images
+BOOT_IMAGE			:= boot-image.bin
+BOOT_ENC_IMAGE			:= boot-image-enc.bin
+FLASH_IMAGE			:= flash-image.bin
+
+# Make non-trusted image by default
+MARVELL_SECURE_BOOT		:= 0
+$(eval $(call add_define,MARVELL_SECURE_BOOT))
+
+# Enable compilation for Palladium emulation platform
+PALLADIUM			:= 0
+$(eval $(call add_define,PALLADIUM))
+
+ifeq (${MARVELL_SECURE_BOOT},1)
+DOIMAGE_SEC_FLAGS := -c $(DOIMAGE_SEC)
+DOIMAGE_LIBS_CHECK = \
+        if ! [ -d "/usr/include/mbedtls" ]; then \
+                        echo "****************************************" >&2; \
+                        echo "Missing mbedTLS installation! " >&2; \
+                        echo "Please download it from \"tls.mbed.org\"" >&2; \
+			echo "Alternatively on Debian/Ubuntu system install" >&2; \
+			echo "\"libmbedtls-dev\" package" >&2; \
+                        echo "Make sure to use version 2.1.0 or later" >&2; \
+                        echo "****************************************" >&2; \
+                exit 1; \
+        else if ! [ -f "/usr/include/libconfig.h" ]; then \
+                        echo "********************************************************" >&2; \
+                        echo "Missing Libconfig installation!" >&2; \
+                        echo "Please download it from \"www.hyperrealm.com/libconfig/\"" >&2; \
+                        echo "Alternatively on Debian/Ubuntu system install packages" >&2; \
+                        echo "\"libconfig8\" and \"libconfig8-dev\"" >&2; \
+                        echo "********************************************************" >&2; \
+                exit 1; \
+        fi \
+        fi
+else #MARVELL_SECURE_BOOT
+DOIMAGE_LIBS_CHECK =
+DOIMAGE_SEC_FLAGS =
+endif #MARVELL_SECURE_BOOT
+
+mrvl_clean:
+	@echo "  Doimage CLEAN"
+	${Q}${MAKE} PLAT=${PLAT} --no-print-directory -C ${DOIMAGEPATH} clean
+
+${DOIMAGETOOL}: mrvl_clean
+	${Q}${MAKE} --no-print-directory -C ${DOIMAGEPATH} WTMI_IMG=$(WTMI_IMG)
+
+
diff --git a/plat/marvell/version.mk b/plat/marvell/version.mk
new file mode 100644
index 00000000..017e1198
--- /dev/null
+++ b/plat/marvell/version.mk
@@ -0,0 +1 @@
+SUBVERSION = devel-18.08.0
diff --git a/tools/doimage/Makefile b/tools/doimage/Makefile
new file mode 100644
index 00000000..bc74369f
--- /dev/null
+++ b/tools/doimage/Makefile
@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:     BSD-3-Clause
+# https://spdx.org/licenses
+
+PROJECT = doimage
+OBJECTS = doimage.o
+
+CFLAGS = -Wall -Werror
+ifeq (${DEBUG},1)
+  CFLAGS += -g -O0 -DDEBUG
+else
+  CFLAGS += -O2
+endif
+
+ifeq (${MARVELL_SECURE_BOOT},1)
+DOIMAGE_CC_FLAGS := -DCONFIG_MVEBU_SECURE_BOOT
+DOIMAGE_LD_FLAGS := -lconfig -lmbedtls -lmbedcrypto -lmbedx509
+endif
+
+CFLAGS += ${DOIMAGE_CC_FLAGS}
+
+# Make soft links and include from local directory otherwise wrong headers
+# could get pulled in from firmware tree.
+INCLUDE_PATHS = -I.
+
+CC := gcc
+RM := rm -rf
+
+.PHONY: all clean
+
+all: ${PROJECT}
+
+${PROJECT}: ${OBJECTS} Makefile
+	@echo "  LD      $@"
+	${Q}${CC} ${OBJECTS} ${DOIMAGE_LD_FLAGS} -o $@
+	@echo
+	@echo "Built $@ successfully"
+	@echo
+
+%.o: %.c %.h Makefile
+	@echo "  CC      $<"
+	${Q}${CC} -c ${CFLAGS} ${INCLUDE_PATHS} $< -o $@
+
+clean:
+	${Q}${RM} ${PROJECT}
+	${Q}${RM} ${OBJECTS}
diff --git a/tools/doimage/doimage.c b/tools/doimage/doimage.c
new file mode 100644
index 00000000..56dabbad
--- /dev/null
+++ b/tools/doimage/doimage.c
@@ -0,0 +1,1755 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stddef.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+
+#ifdef CONFIG_MVEBU_SECURE_BOOT
+#include <libconfig.h>	/* for parsing config file */
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "mbedtls/config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+/* mbedTLS stuff */
+#if defined(MBEDTLS_BIGNUM_C) && defined(MBEDTLS_ENTROPY_C) && \
+	defined(MBEDTLS_SHA256_C) && \
+	defined(MBEDTLS_PK_PARSE_C) && defined(MBEDTLS_FS_IO) && \
+	defined(MBEDTLS_CTR_DRBG_C)
+#include <mbedtls/error.h>
+#include <mbedtls/entropy.h>
+#include <mbedtls/ctr_drbg.h>
+#include <mbedtls/md.h>
+#include <mbedtls/pk.h>
+#include <mbedtls/sha256.h>
+#include <mbedtls/x509.h>
+#else
+#error "Bad mbedTLS configuration!"
+#endif
+#endif /* CONFIG_MVEBU_SECURE_BOOT */
+
+#define MAX_FILENAME		256
+#define CSK_ARR_SZ		16
+#define CSK_ARR_EMPTY_FILE	"*"
+#define AES_KEY_BIT_LEN		256
+#define AES_KEY_BYTE_LEN	(AES_KEY_BIT_LEN >> 3)
+#define AES_BLOCK_SZ		16
+#define RSA_SIGN_BYTE_LEN	256
+#define MAX_RSA_DER_BYTE_LEN	524
+/* Number of address pairs in control array */
+#define CP_CTRL_EL_ARRAY_SZ	32
+
+#define VERSION_STRING		"Marvell(C) doimage utility version 3.2"
+
+/* A8K definitions */
+
+/* Extension header types */
+#define EXT_TYPE_SECURITY	0x1
+#define EXT_TYPE_BINARY		0x2
+
+#define MAIN_HDR_MAGIC		0xB105B002
+
+/* PROLOG alignment considerations:
+ *  128B: To allow supporting XMODEM protocol.
+ *  8KB: To align the boot image to the largest NAND page size, and simplify
+ *  the read operations from NAND.
+ *  We choose the largest page size, in order to use a single image for all
+ *  NAND page sizes.
+ */
+#define PROLOG_ALIGNMENT	(8 << 10)
+
+/* UART argument bitfield */
+#define UART_MODE_UNMODIFIED	0x0
+#define UART_MODE_DISABLE	0x1
+#define UART_MODE_UPDATE	0x2
+
+typedef struct _main_header {
+	uint32_t	magic;			/*  0-3  */
+	uint32_t	prolog_size;		/*  4-7  */
+	uint32_t	prolog_checksum;	/*  8-11 */
+	uint32_t	boot_image_size;	/* 12-15 */
+	uint32_t	boot_image_checksum;	/* 16-19 */
+	uint32_t	rsrvd0;			/* 20-23 */
+	uint32_t	load_addr;		/* 24-27 */
+	uint32_t	exec_addr;		/* 28-31 */
+	uint8_t		uart_cfg;		/*  32   */
+	uint8_t		baudrate;		/*  33   */
+	uint8_t		ext_count;		/*  34   */
+	uint8_t		aux_flags;		/*  35   */
+	uint32_t	io_arg_0;		/* 36-39 */
+	uint32_t	io_arg_1;		/* 40-43 */
+	uint32_t	io_arg_2;		/* 43-47 */
+	uint32_t	io_arg_3;		/* 48-51 */
+	uint32_t	rsrvd1;			/* 52-55 */
+	uint32_t	rsrvd2;			/* 56-59 */
+	uint32_t	rsrvd3;			/* 60-63 */
+} header_t;
+
+typedef struct _ext_header {
+	uint8_t		type;
+	uint8_t		offset;
+	uint16_t	reserved;
+	uint32_t	size;
+} ext_header_t;
+
+typedef struct _sec_entry {
+	uint8_t		kak_key[MAX_RSA_DER_BYTE_LEN];
+	uint32_t	jtag_delay;
+	uint32_t	box_id;
+	uint32_t	flash_id;
+	uint32_t	jtag_en;
+	uint32_t	encrypt_en;
+	uint32_t	efuse_dis;
+	uint8_t		header_sign[RSA_SIGN_BYTE_LEN];
+	uint8_t		image_sign[RSA_SIGN_BYTE_LEN];
+	uint8_t		csk_keys[CSK_ARR_SZ][MAX_RSA_DER_BYTE_LEN];
+	uint8_t		csk_sign[RSA_SIGN_BYTE_LEN];
+	uint32_t	cp_ctrl_arr[CP_CTRL_EL_ARRAY_SZ];
+	uint32_t	cp_efuse_arr[CP_CTRL_EL_ARRAY_SZ];
+} sec_entry_t;
+
+/* A8K definitions end */
+
+/* UART argument bitfield */
+#define UART_MODE_UNMODIFIED	0x0
+#define UART_MODE_DISABLE	0x1
+#define UART_MODE_UPDATE	0x2
+
+#define uart_set_mode(arg, mode)	(arg |= (mode & 0x3))
+
+typedef struct _sec_options {
+#ifdef CONFIG_MVEBU_SECURE_BOOT
+	char aes_key_file[MAX_FILENAME+1];
+	char kak_key_file[MAX_FILENAME+1];
+	char csk_key_file[CSK_ARR_SZ][MAX_FILENAME+1];
+	uint32_t	box_id;
+	uint32_t	flash_id;
+	uint32_t	jtag_delay;
+	uint8_t		csk_index;
+	uint8_t		jtag_enable;
+	uint8_t		efuse_disable;
+	uint32_t	cp_ctrl_arr[CP_CTRL_EL_ARRAY_SZ];
+	uint32_t	cp_efuse_arr[CP_CTRL_EL_ARRAY_SZ];
+	mbedtls_pk_context	kak_pk;
+	mbedtls_pk_context	csk_pk[CSK_ARR_SZ];
+	uint8_t		aes_key[AES_KEY_BYTE_LEN];
+	uint8_t		*encrypted_image;
+	uint32_t	enc_image_sz;
+#endif
+} sec_options;
+
+typedef struct _options {
+	char bin_ext_file[MAX_FILENAME+1];
+	char sec_cfg_file[MAX_FILENAME+1];
+	sec_options *sec_opts;
+	uint32_t  load_addr;
+	uint32_t  exec_addr;
+	uint32_t  baudrate;
+	uint8_t	  disable_print;
+	int8_t    key_index; /* For header signatures verification only */
+	uint32_t  nfc_io_args;
+} options_t;
+
+void usage_err(char *msg)
+{
+	fprintf(stderr, "Error: %s\n", msg);
+	fprintf(stderr, "run 'doimage -h' to get usage information\n");
+	exit(-1);
+}
+
+void usage(void)
+{
+	printf("\n\n%s\n\n", VERSION_STRING);
+	printf("Usage: doimage [options] <input_file> [output_file]\n");
+	printf("create bootrom image from u-boot and boot extensions\n\n");
+
+	printf("Arguments\n");
+	printf("  input_file   name of boot image file.\n");
+	printf("               if -p is used, name of the bootrom image file");
+	printf("               to parse.\n");
+	printf("  output_file  name of output bootrom image file\n");
+
+	printf("\nOptions\n");
+	printf("  -s        target SOC name. supports a8020,a7020\n");
+	printf("            different SOCs may have different boot image\n");
+	printf("            format so it's mandatory to know the target SOC\n");
+	printf("  -i        boot I/F name. supports nand, spi, nor\n");
+	printf("            This affects certain parameters coded in the\n");
+	printf("            image header\n");
+	printf("  -l        boot image load address. default is 0x0\n");
+	printf("  -e        boot image entry address. default is 0x0\n");
+	printf("  -b        binary extension image file.\n");
+	printf("            This image is executed before the boot image.\n");
+	printf("            This is typically used to initialize the memory ");
+	printf("            controller.\n");
+	printf("            Currently supports only a single file.\n");
+#ifdef CONFIG_MVEBU_SECURE_BOOT
+	printf("  -c        Make trusted boot image using parameters\n");
+	printf("            from the configuration file.\n");
+#endif
+	printf("  -p        Parse and display a pre-built boot image\n");
+#ifdef CONFIG_MVEBU_SECURE_BOOT
+	printf("  -k        Key index for RSA signatures verification\n");
+	printf("            when parsing the boot image\n");
+#endif
+	printf("  -m        Disable prints of bootrom and binary extension\n");
+	printf("  -u        UART baudrate used for bootrom prints.\n");
+	printf("            Must be multiple of 1200\n");
+	printf("  -h        Show this help message\n");
+	printf(" IO-ROM NFC-NAND boot parameters:\n");
+	printf("  -n        NAND device block size in KB [Default is 64KB].\n");
+	printf("  -t        NAND cell technology (SLC [Default] or MLC)\n");
+
+	exit(-1);
+}
+
+/* globals */
+options_t opts = {
+	.bin_ext_file = "NA",
+	.sec_cfg_file = "NA",
+	.sec_opts = 0,
+	.load_addr = 0x0,
+	.exec_addr = 0x0,
+	.disable_print = 0,
+	.baudrate = 0,
+	.key_index = -1,
+};
+
+int get_file_size(char *filename)
+{
+	struct stat st;
+
+	if (stat(filename, &st) == 0)
+		return st.st_size;
+
+	return -1;
+}
+
+uint32_t checksum32(uint32_t *start, int len)
+{
+	uint32_t sum = 0;
+	uint32_t *startp = start;
+
+	do {
+		sum += *startp;
+		startp++;
+		len -= 4;
+	} while (len > 0);
+
+	return sum;
+}
+
+/*******************************************************************************
+ *    create_rsa_signature (memory buffer content)
+ *          Create RSASSA-PSS/SHA-256 signature for memory buffer
+ *          using RSA Private Key
+ *    INPUT:
+ *          pk_ctx     Private Key context
+ *          input      memory buffer
+ *          ilen       buffer length
+ *          pers       personalization string for seeding the RNG.
+ *                     For instance a private key file name.
+ *    OUTPUT:
+ *          signature  RSA-2048 signature
+ *    RETURN:
+ *          0 on success
+ */
+#ifdef CONFIG_MVEBU_SECURE_BOOT
+int create_rsa_signature(mbedtls_pk_context	*pk_ctx,
+			 const unsigned char	*input,
+			 size_t			ilen,
+			 const char		*pers,
+			 uint8_t		*signature)
+{
+	mbedtls_entropy_context		entropy;
+	mbedtls_ctr_drbg_context	ctr_drbg;
+	unsigned char			hash[32];
+	unsigned char			buf[MBEDTLS_MPI_MAX_SIZE];
+	int				rval;
+
+	/* Not sure this is required,
+	 * but it's safer to start with empty buffers
+	 */
+	memset(hash, 0, sizeof(hash));
+	memset(buf, 0, sizeof(buf));
+
+	mbedtls_ctr_drbg_init(&ctr_drbg);
+	mbedtls_entropy_init(&entropy);
+
+	/* Seed the random number generator */
+	rval = mbedtls_ctr_drbg_seed(&ctr_drbg, mbedtls_entropy_func, &entropy,
+				(const unsigned char *)pers, strlen(pers));
+	if (rval != 0) {
+		fprintf(stderr, " Failed in ctr_drbg_init call (%d)!\n", rval);
+		goto sign_exit;
+	}
+
+	/* The PK context should be already initialized.
+	 * Set the padding type for this PK context
+	 */
+	mbedtls_rsa_set_padding(mbedtls_pk_rsa(*pk_ctx),
+				MBEDTLS_RSA_PKCS_V21, MBEDTLS_MD_SHA256);
+
+	/* First compute the SHA256 hash for the input blob */
+	mbedtls_sha256(input, ilen, hash, 0);
+
+	/* Then calculate the hash signature */
+	rval = mbedtls_rsa_rsassa_pss_sign(mbedtls_pk_rsa(*pk_ctx),
+					   mbedtls_ctr_drbg_random,
+					   &ctr_drbg,
+					   MBEDTLS_RSA_PRIVATE,
+					   MBEDTLS_MD_SHA256, 0, hash, buf);
+	if (rval != 0) {
+		fprintf(stderr,
+			"Failed to create RSA signature for %s. Error %d\n",
+			pers, rval);
+		goto sign_exit;
+	}
+	memcpy(signature, buf, 256);
+
+sign_exit:
+	mbedtls_ctr_drbg_free(&ctr_drbg);
+	mbedtls_entropy_free(&entropy);
+
+	return rval;
+} /* end of create_rsa_signature */
+
+/*******************************************************************************
+ *    verify_rsa_signature (memory buffer content)
+ *          Verify RSASSA-PSS/SHA-256 signature for memory buffer
+ *          using RSA Public Key
+ *    INPUT:
+ *          pub_key    Public Key buffer
+ *          ilen       Public Key buffer length
+ *          input      memory buffer
+ *          ilen       buffer length
+ *          pers       personalization string for seeding the RNG.
+ *          signature  RSA-2048 signature
+ *    OUTPUT:
+ *          none
+ *    RETURN:
+ *          0 on success
+ */
+int verify_rsa_signature(const unsigned char	*pub_key,
+			 size_t			klen,
+			 const unsigned char	*input,
+			 size_t			ilen,
+			 const char		*pers,
+			 uint8_t		*signature)
+{
+	mbedtls_entropy_context		entropy;
+	mbedtls_ctr_drbg_context	ctr_drbg;
+	mbedtls_pk_context		pk_ctx;
+	unsigned char			hash[32];
+	int				rval;
+
+	/* Not sure this is required,
+	 * but it's safer to start with empty buffer
+	 */
+	memset(hash, 0, sizeof(hash));
+
+	mbedtls_pk_init(&pk_ctx);
+	mbedtls_ctr_drbg_init(&ctr_drbg);
+	mbedtls_entropy_init(&entropy);
+
+	/* Seed the random number generator */
+	rval = mbedtls_ctr_drbg_seed(&ctr_drbg, mbedtls_entropy_func, &entropy,
+				(const unsigned char *)pers, strlen(pers));
+	if (rval != 0) {
+		fprintf(stderr, " Failed in ctr_drbg_init call (%d)!\n", rval);
+		goto verify_exit;
+	}
+
+	/* Check ability to read the public key */
+	rval = mbedtls_pk_parse_public_key(&pk_ctx, pub_key,
+					   MAX_RSA_DER_BYTE_LEN);
+	if (rval != 0) {
+		fprintf(stderr, " Failed in pk_parse_public_key (%#x)!\n",
+			rval);
+		goto verify_exit;
+	}
+
+	/* Set the padding type for the new PK context */
+	mbedtls_rsa_set_padding(mbedtls_pk_rsa(pk_ctx),
+				MBEDTLS_RSA_PKCS_V21,
+				MBEDTLS_MD_SHA256);
+
+	/* Compute the SHA256 hash for the input buffer */
+	mbedtls_sha256(input, ilen, hash, 0);
+
+	rval = mbedtls_rsa_rsassa_pss_verify(mbedtls_pk_rsa(pk_ctx),
+					     mbedtls_ctr_drbg_random,
+					     &ctr_drbg,
+					     MBEDTLS_RSA_PUBLIC,
+					     MBEDTLS_MD_SHA256, 0,
+					     hash, signature);
+	if (rval != 0)
+		fprintf(stderr, "Failed to verify signature (%d)!\n", rval);
+
+verify_exit:
+
+	mbedtls_pk_free(&pk_ctx);
+	mbedtls_ctr_drbg_free(&ctr_drbg);
+	mbedtls_entropy_free(&entropy);
+	return rval;
+} /* end of verify_rsa_signature */
+
+/*******************************************************************************
+ *    image_encrypt
+ *           Encrypt image buffer using AES-256-CBC scheme.
+ *           The resulting image is saved into opts.sec_opts->encrypted_image
+ *           and the adjusted image size into opts.sec_opts->enc_image_sz
+ *           First AES_BLOCK_SZ bytes of the output image contain IV
+ *    INPUT:
+ *          buf        Source buffer to encrypt
+ *          blen       Source buffer length
+ *    OUTPUT:
+ *          none
+ *    RETURN:
+ *          0 on success
+ */
+int image_encrypt(uint8_t *buf, uint32_t blen)
+{
+	struct timeval		tv;
+	char			*ptmp = (char *)&tv;
+	unsigned char		digest[32];
+	unsigned char		IV[AES_BLOCK_SZ];
+	int			i, k;
+	mbedtls_aes_context	aes_ctx;
+	int			rval = -1;
+	uint8_t			*test_img = 0;
+
+	if (AES_BLOCK_SZ > 32) {
+		fprintf(stderr, "Unsupported AES block size %d\n",
+			AES_BLOCK_SZ);
+		return rval;
+	}
+
+	mbedtls_aes_init(&aes_ctx);
+	memset(IV, 0, AES_BLOCK_SZ);
+	memset(digest, 0, 32);
+
+	/* Generate initialization vector and init the AES engine
+	 * Use file name XOR current time and finally SHA-256
+	 * [0...AES_BLOCK_SZ-1]
+	 */
+	k = strlen(opts.sec_opts->aes_key_file);
+	if (k > AES_BLOCK_SZ)
+		k = AES_BLOCK_SZ;
+	memcpy(IV, opts.sec_opts->aes_key_file, k);
+	gettimeofday(&tv, 0);
+
+	for (i = 0, k = 0; i < AES_BLOCK_SZ; i++,
+	     k = (k+1) % sizeof(struct timeval))
+		IV[i] ^= ptmp[k];
+
+	/* compute SHA-256 digest of the results
+	 * and use it as the init vector (IV)
+	 */
+	mbedtls_sha256(IV, AES_BLOCK_SZ, digest, 0);
+	memcpy(IV, digest, AES_BLOCK_SZ);
+	mbedtls_aes_setkey_enc(&aes_ctx, opts.sec_opts->aes_key,
+			       AES_KEY_BIT_LEN);
+
+	/* The output image has to include extra space for IV
+	 * and to be aligned to the AES block size.
+	 * The input image buffer has to be already aligned to AES_BLOCK_SZ
+	 * and padded with zeroes
+	 */
+	opts.sec_opts->enc_image_sz = (blen + 2 * AES_BLOCK_SZ - 1) &
+				      ~(AES_BLOCK_SZ - 1);
+	opts.sec_opts->encrypted_image = calloc(opts.sec_opts->enc_image_sz, 1);
+	if (opts.sec_opts->encrypted_image == 0) {
+		fprintf(stderr, "Failed to allocate encrypted image!\n");
+		goto encrypt_exit;
+	}
+
+	/* Put IV into the output buffer next to the encrypted image
+	 * Since the IV is modified by the encryption function,
+	 * this should be done now
+	 */
+	memcpy(opts.sec_opts->encrypted_image +
+		   opts.sec_opts->enc_image_sz - AES_BLOCK_SZ,
+		   IV, AES_BLOCK_SZ);
+	rval = mbedtls_aes_crypt_cbc(&aes_ctx, MBEDTLS_AES_ENCRYPT,
+			     opts.sec_opts->enc_image_sz - AES_BLOCK_SZ,
+			     IV, buf, opts.sec_opts->encrypted_image);
+	if (rval != 0) {
+		fprintf(stderr, "Failed to encrypt the image! Error %d\n",
+			rval);
+		goto encrypt_exit;
+	}
+
+	mbedtls_aes_free(&aes_ctx);
+
+	/* Try to decrypt the image and compare it with the original data */
+	mbedtls_aes_init(&aes_ctx);
+	mbedtls_aes_setkey_dec(&aes_ctx, opts.sec_opts->aes_key,
+			       AES_KEY_BIT_LEN);
+
+	test_img = calloc(opts.sec_opts->enc_image_sz - AES_BLOCK_SZ, 1);
+	if (test_img == 0) {
+		fprintf(stderr, "Failed to allocate test image!d\n");
+		rval = -1;
+		goto encrypt_exit;
+	}
+
+	memcpy(IV, opts.sec_opts->encrypted_image +
+		   opts.sec_opts->enc_image_sz - AES_BLOCK_SZ,
+		   AES_BLOCK_SZ);
+	rval = mbedtls_aes_crypt_cbc(&aes_ctx, MBEDTLS_AES_DECRYPT,
+			     opts.sec_opts->enc_image_sz - AES_BLOCK_SZ,
+			     IV, opts.sec_opts->encrypted_image, test_img);
+	if (rval != 0) {
+		fprintf(stderr, "Failed to decrypt the image! Error %d\n",
+			rval);
+		goto encrypt_exit;
+	}
+
+	for (i = 0; i < blen; i++) {
+		if (buf[i] != test_img[i]) {
+			fprintf(stderr, "Failed to compare the image after");
+			fprintf(stderr, " decryption! Byte count is %d\n", i);
+			rval = -1;
+			goto encrypt_exit;
+		}
+	}
+
+encrypt_exit:
+
+	mbedtls_aes_free(&aes_ctx);
+	if (test_img)
+		free(test_img);
+
+	return rval;
+} /* end of image_encrypt */
+
+/*******************************************************************************
+ *    verify_secure_header_signatures
+ *          Verify CSK array, header and image signatures and print results
+ *    INPUT:
+ *          main_hdr       Main header
+ *          sec_ext        Secure extension
+ *    OUTPUT:
+ *          none
+ *    RETURN:
+ *          0 on success
+ */
+int verify_secure_header_signatures(header_t *main_hdr, sec_entry_t *sec_ext)
+{
+	uint8_t	*image = (uint8_t *)main_hdr + main_hdr->prolog_size;
+	uint8_t	signature[RSA_SIGN_BYTE_LEN];
+	int		rval = -1;
+
+	/* Save headers signature and reset it in the secure header */
+	memcpy(signature, sec_ext->header_sign, RSA_SIGN_BYTE_LEN);
+	memset(sec_ext->header_sign, 0, RSA_SIGN_BYTE_LEN);
+
+	fprintf(stdout, "\nCheck RSA Signatures\n");
+	fprintf(stdout, "#########################\n");
+	fprintf(stdout, "CSK Block Signature: ");
+	if (verify_rsa_signature(sec_ext->kak_key,
+				 MAX_RSA_DER_BYTE_LEN,
+				 &sec_ext->csk_keys[0][0],
+				 sizeof(sec_ext->csk_keys),
+				 "CSK Block Signature: ",
+				 sec_ext->csk_sign) != 0) {
+		fprintf(stdout, "ERROR\n");
+		goto ver_error;
+	}
+	fprintf(stdout, "OK\n");
+
+	if (opts.key_index != -1) {
+		fprintf(stdout, "Image Signature:     ");
+		if (verify_rsa_signature(sec_ext->csk_keys[opts.key_index],
+					 MAX_RSA_DER_BYTE_LEN,
+					 image, main_hdr->boot_image_size,
+					 "Image Signature: ",
+					 sec_ext->image_sign) != 0) {
+			fprintf(stdout, "ERROR\n");
+			goto ver_error;
+		}
+		fprintf(stdout, "OK\n");
+
+		fprintf(stdout, "Header Signature:    ");
+		if (verify_rsa_signature(sec_ext->csk_keys[opts.key_index],
+					 MAX_RSA_DER_BYTE_LEN,
+					 (uint8_t *)main_hdr,
+					 main_hdr->prolog_size,
+					 "Header Signature: ",
+					 signature) != 0) {
+			fprintf(stdout, "ERROR\n");
+			goto ver_error;
+		}
+		fprintf(stdout, "OK\n");
+	} else {
+		fprintf(stdout, "SKIP Image and Header Signatures");
+		fprintf(stdout, " check (undefined key index)\n");
+	}
+
+	rval = 0;
+
+ver_error:
+	memcpy(sec_ext->header_sign, signature, RSA_SIGN_BYTE_LEN);
+	return rval;
+}
+
+/*******************************************************************************
+ *    verify_and_copy_file_name_entry
+ *    INPUT:
+ *          element_name
+ *          element
+ *    OUTPUT:
+ *          copy_to
+ *    RETURN:
+ *          0 on success
+ */
+int verify_and_copy_file_name_entry(const char *element_name,
+				    const char *element, char *copy_to)
+{
+	int element_length = strlen(element);
+
+	if (element_length >= MAX_FILENAME) {
+		fprintf(stderr, "The file name %s for %s is too long (%d). ",
+			element, element_name, element_length);
+		fprintf(stderr, "Maximum allowed %d characters!\n",
+			MAX_FILENAME);
+		return -1;
+	} else if (element_length == 0) {
+		fprintf(stderr, "The file name for %s is empty!\n",
+			element_name);
+		return -1;
+	}
+	memcpy(copy_to, element, element_length);
+
+	return 0;
+}
+
+/*******************************************************************************
+ *    parse_sec_config_file
+ *          Read the secure boot configuration from a file
+ *          into internal structures
+ *    INPUT:
+ *          filename      File name
+ *    OUTPUT:
+ *          none
+ *    RETURN:
+ *          0 on success
+ */
+int parse_sec_config_file(char *filename)
+{
+	config_t		sec_cfg;
+	int			array_sz, element, rval = -1;
+	const char		*cfg_string;
+	int32_t			cfg_int32;
+	const config_setting_t	*csk_array, *control_array;
+	sec_options		*sec_opt = 0;
+
+	config_init(&sec_cfg);
+
+	if (config_read_file(&sec_cfg, filename) != CONFIG_TRUE) {
+		fprintf(stderr, "Failed to read data from config file ");
+		fprintf(stderr, "%s\n\t%s at line %d\n",
+			filename, config_error_text(&sec_cfg),
+			config_error_line(&sec_cfg));
+		goto exit_parse;
+	}
+
+	sec_opt = (sec_options *)calloc(sizeof(sec_options), 1);
+	if (sec_opt == 0) {
+		fprintf(stderr,
+			"Cannot allocate memory for secure boot options!\n");
+		goto exit_parse;
+	}
+
+	/* KAK file name */
+	if (config_lookup_string(&sec_cfg, "kak_key_file",
+				 &cfg_string) != CONFIG_TRUE) {
+		fprintf(stderr, "The \"kak_key_file\" undefined!\n");
+		goto exit_parse;
+	}
+	if (verify_and_copy_file_name_entry("kak_key_file",
+					    cfg_string, sec_opt->kak_key_file))
+		goto exit_parse;
+
+
+	/* AES file name - can be empty/undefined */
+	if (config_lookup_string(&sec_cfg, "aes_key_file",
+				 &cfg_string) == CONFIG_TRUE) {
+		if (verify_and_copy_file_name_entry("aes_key_file",
+						    cfg_string,
+						    sec_opt->aes_key_file))
+			goto exit_parse;
+	}
+
+	/* CSK file names array */
+	csk_array = config_lookup(&sec_cfg, "csk_key_file");
+	if (csk_array == NULL) {
+		fprintf(stderr, "The \"csk_key_file\" undefined!\n");
+		goto exit_parse;
+	}
+	array_sz = config_setting_length(csk_array);
+	if (array_sz > CSK_ARR_SZ) {
+		fprintf(stderr, "The \"csk_key_file\" array is too big! ");
+		fprintf(stderr, "Only first %d elements will be used\n",
+			CSK_ARR_SZ);
+		array_sz = CSK_ARR_SZ;
+	} else if (array_sz == 0) {
+		fprintf(stderr, "The \"csk_key_file\" array is empty!\n");
+		goto exit_parse;
+	}
+
+	for (element = 0; element < array_sz; element++) {
+		cfg_string = config_setting_get_string_elem(csk_array, element);
+		if (verify_and_copy_file_name_entry(
+				"csk_key_file", cfg_string,
+				sec_opt->csk_key_file[element])) {
+			fprintf(stderr, "Bad csk_key_file[%d] entry!\n",
+				element);
+			goto exit_parse;
+		}
+	}
+
+	/* JTAG options */
+	if (config_lookup_bool(&sec_cfg, "jtag.enable",
+			       &cfg_int32) != CONFIG_TRUE) {
+		fprintf(stderr, "Error obtaining \"jtag.enable\" element. ");
+		fprintf(stderr, "Using default - FALSE\n");
+		cfg_int32 = 0;
+	}
+	sec_opt->jtag_enable = cfg_int32;
+
+	if (config_lookup_int(&sec_cfg, "jtag.delay",
+			      &cfg_int32) != CONFIG_TRUE) {
+		fprintf(stderr, "Error obtaining \"jtag.delay\" element. ");
+		fprintf(stderr, "Using default - 0us\n");
+		cfg_int32 = 0;
+	}
+	sec_opt->jtag_delay = cfg_int32;
+
+	/* eFUSE option */
+	if (config_lookup_bool(&sec_cfg, "efuse_disable",
+			       &cfg_int32) != CONFIG_TRUE) {
+		fprintf(stderr, "Error obtaining \"efuse_disable\" element. ");
+		fprintf(stderr, "Using default - TRUE\n");
+		cfg_int32 = 1;
+	}
+	sec_opt->efuse_disable = cfg_int32;
+
+	/* Box ID option */
+	if (config_lookup_int(&sec_cfg, "box_id", &cfg_int32) != CONFIG_TRUE) {
+		fprintf(stderr, "Error obtaining \"box_id\" element. ");
+		fprintf(stderr, "Using default - 0x0\n");
+		cfg_int32 = 0;
+	}
+	sec_opt->box_id = cfg_int32;
+
+	/* Flash ID option */
+	if (config_lookup_int(&sec_cfg, "flash_id",
+			      &cfg_int32) != CONFIG_TRUE) {
+		fprintf(stderr, "Error obtaining \"flash_id\" element. ");
+		fprintf(stderr, "Using default - 0x0\n");
+		cfg_int32 = 0;
+	}
+	sec_opt->flash_id = cfg_int32;
+
+	/* CSK index option */
+	if (config_lookup_int(&sec_cfg, "csk_key_index",
+			      &cfg_int32) != CONFIG_TRUE) {
+		fprintf(stderr, "Error obtaining \"flash_id\" element. "
+		fprintf(stderr, "Using default - 0x0\n");
+		cfg_int32 = 0;
+	}
+	sec_opt->csk_index = cfg_int32;
+
+	/* Secure boot control array */
+	control_array = config_lookup(&sec_cfg, "control");
+	if (control_array != NULL) {
+		array_sz = config_setting_length(control_array);
+		if (array_sz == 0)
+			fprintf(stderr, "The \"control\" array is empty!\n");
+	} else {
+		fprintf(stderr, "The \"control\" is undefined!\n");
+		array_sz = 0;
+	}
+
+	for (element = 0; element < CP_CTRL_EL_ARRAY_SZ; element++) {
+		sec_opt->cp_ctrl_arr[element] =
+			config_setting_get_int_elem(control_array, element * 2);
+		sec_opt->cp_efuse_arr[element] =
+			config_setting_get_int_elem(control_array,
+						    element * 2 + 1);
+	}
+
+	opts.sec_opts = sec_opt;
+	rval = 0;
+
+exit_parse:
+	config_destroy(&sec_cfg);
+	if (sec_opt && (rval != 0))
+		free(sec_opt);
+	return rval;
+} /* end of parse_sec_config_file */
+
+int format_sec_ext(char *filename, FILE *out_fd)
+{
+	ext_header_t	header;
+	sec_entry_t	sec_ext;
+	int		index;
+	int		written;
+
+#define DER_BUF_SZ	1600
+
+	/* First, parse the configuration file */
+	if (parse_sec_config_file(filename)) {
+		fprintf(stderr,
+			"failed parsing configuration file %s\n", filename);
+		return 1;
+	}
+
+	/* Everything except signatures can be created at this stage */
+	header.type = EXT_TYPE_SECURITY;
+	header.offset = 0;
+	header.size = sizeof(sec_entry_t);
+	header.reserved = 0;
+
+	/* Bring up RSA context and read private keys from their files */
+	for (index = 0; index < (CSK_ARR_SZ + 1); index++) {
+		/* for every private key file */
+		mbedtls_pk_context	*pk_ctx = (index == CSK_ARR_SZ) ?
+					&opts.sec_opts->kak_pk :
+					&opts.sec_opts->csk_pk[index];
+		char		*fname = (index == CSK_ARR_SZ) ?
+					opts.sec_opts->kak_key_file :
+					opts.sec_opts->csk_key_file[index];
+		uint8_t		*out_der_key = (index == CSK_ARR_SZ) ?
+					sec_ext.kak_key :
+					sec_ext.csk_keys[index];
+		size_t		output_len;
+		unsigned char	output_buf[DER_BUF_SZ];
+		unsigned char	*der_buf_start;
+
+		/* Handle invalid/reserved file names */
+		if (strncmp(CSK_ARR_EMPTY_FILE, fname,
+			    strlen(CSK_ARR_EMPTY_FILE)) == 0) {
+			if (opts.sec_opts->csk_index == index) {
+				fprintf(stderr,
+					"CSK file with index %d cannot be %s\n",
+					index, CSK_ARR_EMPTY_FILE);
+				return 1;
+			} else if (index == CSK_ARR_SZ) {
+				fprintf(stderr, "KAK file name cannot be %s\n",
+					CSK_ARR_EMPTY_FILE);
+				return 1;
+			}
+			/* this key will be empty in CSK array */
+			continue;
+		}
+
+		mbedtls_pk_init(pk_ctx);
+		/* Read the private RSA key into the context
+		 * and verify it (no password)
+		 */
+		if (mbedtls_pk_parse_keyfile(pk_ctx, fname, "") != 0) {
+			fprintf(stderr,
+				"Cannot read RSA private key file %s\n", fname);
+			return 1;
+		}
+
+		/* Create a public key out of private one
+		 * and store it in DER format
+		 */
+		output_len = mbedtls_pk_write_pubkey_der(pk_ctx,
+							 output_buf,
+							 DER_BUF_SZ);
+		if (output_len < 0) {
+			fprintf(stderr,
+				"Failed to create DER coded PUB key (%s)\n",
+				fname);
+			return 1;
+		}
+		/* Data in the output buffer is aligned to the buffer end */
+		der_buf_start = output_buf + sizeof(output_buf) - output_len;
+		/* In the header DER data is aligned
+		 * to the start of appropriate field
+		 */
+		memcpy(out_der_key, der_buf_start, output_len);
+
+	} /* for every private key file */
+
+	/* The CSK block signature can be created here */
+	if (create_rsa_signature(&opts.sec_opts->kak_pk,
+				 &sec_ext.csk_keys[0][0],
+				 sizeof(sec_ext.csk_keys),
+				 opts.sec_opts->csk_key_file[
+					 opts.sec_opts->csk_index],
+				 sec_ext.csk_sign) != 0) {
+		fprintf(stderr, "Failed to sign CSK keys block!\n");
+		return 1;
+	}
+	/* Check that everything is correct */
+	if (verify_rsa_signature(sec_ext.kak_key, MAX_RSA_DER_BYTE_LEN,
+				 &sec_ext.csk_keys[0][0],
+				 sizeof(sec_ext.csk_keys),
+				 opts.sec_opts->kak_key_file,
+				 sec_ext.csk_sign) != 0) {
+		fprintf(stderr, "Failed to verify CSK keys block signature!\n");
+		return 1;
+	}
+
+	/* AES encryption stuff */
+	if (strlen(opts.sec_opts->aes_key_file) != 0) {
+		FILE		*in_fd;
+
+		in_fd = fopen(opts.sec_opts->aes_key_file, "rb");
+		if (in_fd == NULL) {
+			fprintf(stderr, "Failed to open AES key file %s\n",
+				opts.sec_opts->aes_key_file);
+			return 1;
+		}
+
+		/* Read the AES key in ASCII format byte by byte */
+		for (index = 0; index < AES_KEY_BYTE_LEN; index++) {
+			if (fscanf(in_fd, "%02hhx",
+			    opts.sec_opts->aes_key + index) != 1) {
+				fprintf(stderr,
+					"Failed to read AES key byte %d ",
+					index);
+				fprintf(stderr,
+					"from file %s\n",
+					opts.sec_opts->aes_key_file);
+				fclose(in_fd);
+				return 1;
+			}
+		}
+		fclose(in_fd);
+		sec_ext.encrypt_en = 1;
+	} else {
+		sec_ext.encrypt_en = 0;
+	}
+
+	/* Fill the rest of the trusted boot extension fields */
+	sec_ext.box_id		= opts.sec_opts->box_id;
+	sec_ext.flash_id	= opts.sec_opts->flash_id;
+	sec_ext.efuse_dis	= opts.sec_opts->efuse_disable;
+	sec_ext.jtag_delay	= opts.sec_opts->jtag_delay;
+	sec_ext.jtag_en		= opts.sec_opts->jtag_enable;
+
+	memcpy(sec_ext.cp_ctrl_arr,
+	       opts.sec_opts->cp_ctrl_arr,
+	       sizeof(uint32_t) * CP_CTRL_EL_ARRAY_SZ);
+	memcpy(sec_ext.cp_efuse_arr,
+	       opts.sec_opts->cp_efuse_arr,
+	       sizeof(uint32_t) * CP_CTRL_EL_ARRAY_SZ);
+
+	/* Write the resulting extension to file
+	 * (image and header signature fields are still empty)
+	 */
+
+	/* Write extension header */
+	written = fwrite(&header, sizeof(ext_header_t), 1, out_fd);
+	if (written != 1) {
+		fprintf(stderr,
+			"Failed to write SEC extension header to the file\n");
+		return 1;
+	}
+	/* Write extension body */
+	written = fwrite(&sec_ext, sizeof(sec_entry_t), 1, out_fd);
+	if (written != 1) {
+		fprintf(stderr,
+			"Failed to write SEC extension body to the file\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+/*******************************************************************************
+ *    finalize_secure_ext
+ *          Make final changes to secure extension - calculate image and header
+ *          signatures and encrypt the image if needed.
+ *          The main header checksum and image size fields updated accordingly
+ *    INPUT:
+ *          header       Main header
+ *          prolog_buf   the entire prolog buffer
+ *          prolog_size  prolog buffer length
+ *          image_buf    buffer containing the input binary image
+ *          image_size   image buffer size.
+ *    OUTPUT:
+ *          none
+ *    RETURN:
+ *          0 on success
+ */
+int finalize_secure_ext(header_t *header,
+			uint8_t *prolog_buf, uint32_t prolog_size,
+			uint8_t *image_buf, int image_size)
+{
+	int		cur_ext, offset;
+	uint8_t		*final_image = image_buf;
+	uint32_t	final_image_sz = image_size;
+	uint8_t		hdr_sign[RSA_SIGN_BYTE_LEN];
+	sec_entry_t	*sec_ext = 0;
+
+	/* Find the Trusted Boot Header between available extensions */
+	for (cur_ext = 0, offset = sizeof(header_t);
+	     cur_ext < header->ext_count; cur_ext++) {
+		ext_header_t *ext_hdr = (ext_header_t *)(prolog_buf + offset);
+
+		if (ext_hdr->type == EXT_TYPE_SECURITY) {
+			sec_ext = (sec_entry_t *)(prolog_buf + offset +
+				   sizeof(ext_header_t) + ext_hdr->offset);
+			break;
+		}
+
+		offset += sizeof(ext_header_t);
+		/* If offset is Zero, the extension follows its header */
+		if (ext_hdr->offset == 0)
+			offset += ext_hdr->size;
+	}
+
+	if (sec_ext == 0) {
+		fprintf(stderr, "Error: No Trusted Boot extension found!\n");
+		return -1;
+	}
+
+	if (sec_ext->encrypt_en) {
+		/* Encrypt the image if needed */
+		fprintf(stdout, "Encrypting the image...\n");
+
+		if (image_encrypt(image_buf, image_size) != 0) {
+			fprintf(stderr, "Failed to encrypt the image!\n");
+			return -1;
+		}
+
+		/* Image size and checksum should be updated after encryption.
+		 * This way the image could be verified by the BootROM
+		 * before decryption.
+		 */
+		final_image = opts.sec_opts->encrypted_image;
+		final_image_sz = opts.sec_opts->enc_image_sz;
+
+		header->boot_image_size = final_image_sz;
+		header->boot_image_checksum =
+			checksum32((uint32_t *)final_image, final_image_sz);
+	} /* AES encryption */
+
+	/* Create the image signature first, since it will be later
+	 * signed along with the header signature
+	 */
+	if (create_rsa_signature(&opts.sec_opts->csk_pk[
+					opts.sec_opts->csk_index],
+				 final_image, final_image_sz,
+				 opts.sec_opts->csk_key_file[
+					opts.sec_opts->csk_index],
+				 sec_ext->image_sign) != 0) {
+		fprintf(stderr, "Failed to sign image!\n");
+		return -1;
+	}
+	/* Check that the image signature is correct */
+	if (verify_rsa_signature(sec_ext->csk_keys[opts.sec_opts->csk_index],
+				 MAX_RSA_DER_BYTE_LEN,
+				 final_image, final_image_sz,
+				 opts.sec_opts->csk_key_file[
+					 opts.sec_opts->csk_index],
+				 sec_ext->image_sign) != 0) {
+		fprintf(stderr, "Failed to verify image signature!\n");
+		return -1;
+	}
+
+	/* Sign the headers and all the extensions block
+	 * when the header signature field is empty
+	 */
+	if (create_rsa_signature(&opts.sec_opts->csk_pk[
+					 opts.sec_opts->csk_index],
+				 prolog_buf, prolog_size,
+				 opts.sec_opts->csk_key_file[
+					 opts.sec_opts->csk_index],
+				 hdr_sign) != 0) {
+		fprintf(stderr, "Failed to sign header!\n");
+		return -1;
+	}
+	/* Check that the header signature is correct */
+	if (verify_rsa_signature(sec_ext->csk_keys[opts.sec_opts->csk_index],
+				 MAX_RSA_DER_BYTE_LEN,
+				 prolog_buf, prolog_size,
+				 opts.sec_opts->csk_key_file[
+					 opts.sec_opts->csk_index],
+				 hdr_sign) != 0) {
+		fprintf(stderr, "Failed to verify header signature!\n");
+		return -1;
+	}
+
+	/* Finally, copy the header signature into the trusted boot extension */
+	memcpy(sec_ext->header_sign, hdr_sign, RSA_SIGN_BYTE_LEN);
+
+	return 0;
+}
+
+#endif /* CONFIG_MVEBU_SECURE_BOOT */
+
+
+#define FMT_HEX		0
+#define FMT_DEC		1
+#define FMT_BIN		2
+#define FMT_NONE	3
+
+void do_print_field(unsigned int value, char *name,
+		    int start, int size, int format)
+{
+	fprintf(stdout, "[0x%05x : 0x%05x]  %-26s",
+		start, start + size - 1, name);
+
+	switch (format) {
+	case FMT_HEX:
+		printf("0x%x\n", value);
+		break;
+	case FMT_DEC:
+		printf("%d\n", value);
+		break;
+	default:
+		printf("\n");
+		break;
+	}
+}
+
+#define print_field(st, type, field, hex, base) \
+			do_print_field((int)st->field, #field, \
+			base + offsetof(type, field), sizeof(st->field), hex)
+
+int print_header(uint8_t *buf, int base)
+{
+	header_t *main_hdr;
+
+	main_hdr = (header_t *)buf;
+
+	fprintf(stdout, "########### Header ##############\n");
+	print_field(main_hdr, header_t, magic, FMT_HEX, base);
+	print_field(main_hdr, header_t, prolog_size, FMT_DEC, base);
+	print_field(main_hdr, header_t, prolog_checksum, FMT_HEX, base);
+	print_field(main_hdr, header_t, boot_image_size, FMT_DEC, base);
+	print_field(main_hdr, header_t, boot_image_checksum, FMT_HEX, base);
+	print_field(main_hdr, header_t, rsrvd0, FMT_HEX, base);
+	print_field(main_hdr, header_t, load_addr, FMT_HEX, base);
+	print_field(main_hdr, header_t, exec_addr, FMT_HEX, base);
+	print_field(main_hdr, header_t, uart_cfg, FMT_HEX, base);
+	print_field(main_hdr, header_t, baudrate, FMT_HEX, base);
+	print_field(main_hdr, header_t, ext_count, FMT_DEC, base);
+	print_field(main_hdr, header_t, aux_flags, FMT_HEX, base);
+	print_field(main_hdr, header_t, io_arg_0, FMT_HEX, base);
+	print_field(main_hdr, header_t, io_arg_1, FMT_HEX, base);
+	print_field(main_hdr, header_t, io_arg_2, FMT_HEX, base);
+	print_field(main_hdr, header_t, io_arg_3, FMT_HEX, base);
+	print_field(main_hdr, header_t, rsrvd1, FMT_HEX, base);
+	print_field(main_hdr, header_t, rsrvd2, FMT_HEX, base);
+	print_field(main_hdr, header_t, rsrvd3, FMT_HEX, base);
+
+	return sizeof(header_t);
+}
+
+int print_ext_hdr(ext_header_t *ext_hdr, int base)
+{
+	print_field(ext_hdr, ext_header_t, type, FMT_HEX, base);
+	print_field(ext_hdr, ext_header_t, offset, FMT_HEX, base);
+	print_field(ext_hdr, ext_header_t, reserved, FMT_HEX, base);
+	print_field(ext_hdr, ext_header_t, size, FMT_DEC, base);
+
+	return base + sizeof(ext_header_t);
+}
+
+void print_sec_ext(ext_header_t *ext_hdr, int base)
+{
+	sec_entry_t	*sec_entry;
+	uint32_t	new_base;
+
+	fprintf(stdout, "\n########### Secure extension ###########\n");
+
+	new_base = print_ext_hdr(ext_hdr, base);
+
+	sec_entry = (sec_entry_t *)(ext_hdr + 1);
+
+	do_print_field(0, "KAK key", new_base, MAX_RSA_DER_BYTE_LEN, FMT_NONE);
+	new_base += MAX_RSA_DER_BYTE_LEN;
+	print_field(sec_entry, sec_entry_t, jtag_delay, FMT_DEC, base);
+	print_field(sec_entry, sec_entry_t, box_id, FMT_HEX, base);
+	print_field(sec_entry, sec_entry_t, flash_id, FMT_HEX, base);
+	print_field(sec_entry, sec_entry_t, encrypt_en, FMT_DEC, base);
+	print_field(sec_entry, sec_entry_t, efuse_dis, FMT_DEC, base);
+	new_base += 6 * sizeof(uint32_t);
+	do_print_field(0, "header signature",
+		       new_base, RSA_SIGN_BYTE_LEN, FMT_NONE);
+	new_base += RSA_SIGN_BYTE_LEN;
+	do_print_field(0, "image signature",
+		       new_base, RSA_SIGN_BYTE_LEN, FMT_NONE);
+	new_base += RSA_SIGN_BYTE_LEN;
+	do_print_field(0, "CSK keys", new_base,
+		       CSK_ARR_SZ * MAX_RSA_DER_BYTE_LEN, FMT_NONE);
+	new_base += CSK_ARR_SZ * MAX_RSA_DER_BYTE_LEN;
+	do_print_field(0, "CSK block signature",
+		       new_base, RSA_SIGN_BYTE_LEN, FMT_NONE);
+	new_base += RSA_SIGN_BYTE_LEN;
+	do_print_field(0, "control", new_base,
+		       CP_CTRL_EL_ARRAY_SZ * 2, FMT_NONE);
+
+}
+
+void print_bin_ext(ext_header_t *ext_hdr, int base)
+{
+	fprintf(stdout, "\n########### Binary extension ###########\n");
+	base = print_ext_hdr(ext_hdr, base);
+	do_print_field(0, "binary image", base, ext_hdr->size, FMT_NONE);
+}
+
+int print_extension(void *buf, int base, int count, int ext_size)
+{
+	ext_header_t *ext_hdr = buf;
+	int pad = ext_size;
+	int curr_size;
+
+	while (count--) {
+		if (ext_hdr->type == EXT_TYPE_BINARY)
+			print_bin_ext(ext_hdr, base);
+		else if (ext_hdr->type == EXT_TYPE_SECURITY)
+			print_sec_ext(ext_hdr, base);
+
+		curr_size = sizeof(ext_header_t) + ext_hdr->size;
+		base += curr_size;
+		pad  -= curr_size;
+		ext_hdr = (ext_header_t *)((uintptr_t)ext_hdr + curr_size);
+	}
+
+	if (pad)
+		do_print_field(0, "padding", base, pad, FMT_NONE);
+
+	return ext_size;
+}
+
+int parse_image(uint8_t *buf, int size)
+{
+	int base = 0;
+	int ret = 1;
+	header_t *main_hdr;
+	uint32_t checksum, prolog_checksum;
+
+
+	fprintf(stdout,
+		"################### Prolog Start ######################\n\n");
+	main_hdr = (header_t *)buf;
+	base += print_header(buf, base);
+
+	if (main_hdr->ext_count)
+		base += print_extension(buf + base, base,
+					main_hdr->ext_count,
+					main_hdr->prolog_size -
+					sizeof(header_t));
+
+	if (base < main_hdr->prolog_size) {
+		fprintf(stdout, "\n########### Padding ##############\n");
+		do_print_field(0, "prolog padding",
+			       base, main_hdr->prolog_size - base, FMT_HEX);
+		base = main_hdr->prolog_size;
+	}
+	fprintf(stdout,
+		"\n################### Prolog End ######################\n");
+
+	fprintf(stdout,
+		"\n################### Boot image ######################\n");
+
+	do_print_field(0, "boot image", base, size - base - 4, FMT_NONE);
+
+	fprintf(stdout,
+		"################### Image end ########################\n");
+
+	/* Check sanity for certain values */
+	printf("\nChecking values:\n");
+
+	if (main_hdr->magic == MAIN_HDR_MAGIC) {
+		fprintf(stdout, "Headers magic:    OK!\n");
+	} else {
+		fprintf(stderr,
+			"\n****** ERROR: HEADER MAGIC 0x%08x != 0x%08x\n",
+			main_hdr->magic, MAIN_HDR_MAGIC);
+		goto error;
+	}
+
+	/* headers checksum */
+	/* clear the checksum field in header to calculate checksum */
+	prolog_checksum = main_hdr->prolog_checksum;
+	main_hdr->prolog_checksum = 0;
+	checksum = checksum32((uint32_t *)buf, main_hdr->prolog_size);
+
+	if (checksum == prolog_checksum) {
+		fprintf(stdout, "Headers checksum: OK!\n");
+	} else {
+		fprintf(stderr,
+			"\n***** ERROR: BAD HEADER CHECKSUM 0x%08x != 0x%08x\n",
+			checksum, prolog_checksum);
+		goto error;
+	}
+
+	/* boot image checksum */
+	checksum = checksum32((uint32_t *)(buf + main_hdr->prolog_size),
+			      main_hdr->boot_image_size);
+	if (checksum == main_hdr->boot_image_checksum) {
+		fprintf(stdout, "Image checksum:   OK!\n");
+	} else {
+		fprintf(stderr,
+			"\n****** ERROR: BAD IMAGE CHECKSUM 0x%08x != 0x%08x\n",
+			checksum, main_hdr->boot_image_checksum);
+		goto error;
+	}
+
+#ifdef CONFIG_MVEBU_SECURE_BOOT
+	/* RSA signatures */
+	if (main_hdr->ext_count) {
+		uint8_t		ext_num = main_hdr->ext_count;
+		ext_header_t	*ext_hdr = (ext_header_t *)(main_hdr + 1);
+		unsigned char	hash[32];
+		int		i;
+
+		while (ext_num--) {
+			if (ext_hdr->type == EXT_TYPE_SECURITY) {
+				sec_entry_t  *sec_entry =
+						(sec_entry_t *)(ext_hdr + 1);
+
+				ret = verify_secure_header_signatures(
+							main_hdr, sec_entry);
+				if (ret != 0) {
+					fprintf(stderr,
+						"\n****** FAILED TO VERIFY ");
+					fprintf(stderr,
+						"RSA SIGNATURES ********\n");
+					goto error;
+				}
+
+				mbedtls_sha256(sec_entry->kak_key,
+					       MAX_RSA_DER_BYTE_LEN, hash, 0);
+				fprintf(stdout,
+					">>>>>>>>>> KAK KEY HASH >>>>>>>>>>\n");
+				fprintf(stdout, "SHA256: ");
+				for (i = 0; i < 32; i++)
+					fprintf(stdout, "%02X", hash[i]);
+
+				fprintf(stdout,
+					"\n<<<<<<<<< KAK KEY HASH <<<<<<<<<\n");
+
+				break;
+			}
+			ext_hdr =
+				(ext_header_t *)((uint8_t *)(ext_hdr + 1) +
+				 ext_hdr->size);
+		}
+	}
+#endif
+
+	ret = 0;
+error:
+	return ret;
+}
+
+int format_bin_ext(char *filename, FILE *out_fd)
+{
+	ext_header_t header;
+	FILE *in_fd;
+	int size, written;
+	int aligned_size, pad_bytes;
+	char c;
+
+	in_fd = fopen(filename, "rb");
+	if (in_fd == NULL) {
+		fprintf(stderr, "failed to open bin extension file %s\n",
+			filename);
+		return 1;
+	}
+
+	size = get_file_size(filename);
+	if (size <= 0) {
+		fprintf(stderr, "bin extension file size is bad\n");
+		return 1;
+	}
+
+	/* Align extension size to 8 bytes */
+	aligned_size = (size + 7) & (~7);
+	pad_bytes    = aligned_size - size;
+
+	header.type = EXT_TYPE_BINARY;
+	header.offset = 0;
+	header.size = aligned_size;
+	header.reserved = 0;
+
+	/* Write header */
+	written = fwrite(&header, sizeof(ext_header_t), 1, out_fd);
+	if (written != 1) {
+		fprintf(stderr, "failed writing header to extension file\n");
+		return 1;
+	}
+
+	/* Write image */
+	while (size--) {
+		c = getc(in_fd);
+		fputc(c, out_fd);
+	}
+
+	while (pad_bytes--)
+		fputc(0, out_fd);
+
+	fclose(in_fd);
+
+	return 0;
+}
+
+/* ****************************************
+ *
+ * Write all extensions (binary, secure
+ * extensions) to file
+ *
+ * ****************************************/
+
+int format_extensions(char *ext_filename)
+{
+	FILE *out_fd;
+	int ret = 0;
+
+	out_fd = fopen(ext_filename, "wb");
+	if (out_fd == NULL) {
+		fprintf(stderr, "failed to open extension output file %s",
+			ext_filename);
+		return 1;
+	}
+
+	if (strncmp(opts.bin_ext_file, "NA", MAX_FILENAME)) {
+		if (format_bin_ext(opts.bin_ext_file, out_fd)) {
+			ret = 1;
+			goto error;
+		}
+	}
+#ifdef CONFIG_MVEBU_SECURE_BOOT
+	if (strncmp(opts.sec_cfg_file, "NA", MAX_FILENAME)) {
+		if (format_sec_ext(opts.sec_cfg_file, out_fd)) {
+			ret = 1;
+			goto error;
+		}
+	}
+#endif
+
+error:
+	fflush(out_fd);
+	fclose(out_fd);
+	return ret;
+}
+
+void update_uart(header_t *header)
+{
+	header->uart_cfg = 0;
+	header->baudrate = 0;
+
+	if (opts.disable_print)
+		uart_set_mode(header->uart_cfg, UART_MODE_DISABLE);
+
+	if (opts.baudrate)
+		header->baudrate = (opts.baudrate / 1200);
+}
+
+/* ****************************************
+ *
+ * Write the image prolog, i.e.
+ * main header and extensions, to file
+ *
+ * ****************************************/
+
+int write_prolog(int ext_cnt, char *ext_filename,
+		 uint8_t *image_buf, int image_size, FILE *out_fd)
+{
+	header_t		*header;
+	int main_hdr_size = sizeof(header_t);
+	int prolog_size = main_hdr_size;
+	FILE *ext_fd;
+	char *buf;
+	int written, read;
+	int ret = 1;
+
+
+	if (ext_cnt)
+		prolog_size +=  get_file_size(ext_filename);
+
+	prolog_size = ((prolog_size + PROLOG_ALIGNMENT) &
+		     (~(PROLOG_ALIGNMENT-1)));
+
+	/* Allocate a zeroed buffer to zero the padding bytes */
+	buf = calloc(prolog_size, 1);
+	if (buf == NULL) {
+		fprintf(stderr, "Error: failed allocating checksum buffer\n");
+		return 1;
+	}
+
+	header = (header_t *)buf;
+	header->magic       = MAIN_HDR_MAGIC;
+	header->prolog_size = prolog_size;
+	header->load_addr   = opts.load_addr;
+	header->exec_addr   = opts.exec_addr;
+	header->io_arg_0    = opts.nfc_io_args;
+	header->ext_count   = ext_cnt;
+	header->aux_flags   = 0;
+	header->boot_image_size = (image_size + 3) & (~0x3);
+	header->boot_image_checksum = checksum32((uint32_t *)image_buf,
+						 image_size);
+
+	update_uart(header);
+
+	/* Populate buffer with main header and extensions */
+	if (ext_cnt) {
+		ext_fd = fopen(ext_filename, "rb");
+		if (ext_fd == NULL) {
+			fprintf(stderr,
+				"Error: failed to open extensions file\n");
+			goto error;
+		}
+
+		read = fread(&buf[main_hdr_size],
+			     get_file_size(ext_filename), 1, ext_fd);
+		if (read != 1) {
+			fprintf(stderr,
+				"Error: failed to open extensions file\n");
+			goto error;
+		}
+
+#ifdef CONFIG_MVEBU_SECURE_BOOT
+		/* Secure boot mode? */
+		if (opts.sec_opts != 0) {
+			ret = finalize_secure_ext(header, (uint8_t *)buf,
+						  prolog_size, image_buf,
+						  image_size);
+			if (ret != 0) {
+				fprintf(stderr, "Error: failed to handle ");
+				fprintf(stderr, "secure extension!\n");
+				goto error;
+			}
+		} /* secure boot mode */
+#endif
+	}
+
+	/* Update the total prolog checksum */
+	header->prolog_checksum = checksum32((uint32_t *)buf, prolog_size);
+
+	/* Now spill everything to output file */
+	written = fwrite(buf, prolog_size, 1, out_fd);
+	if (written != 1) {
+		fprintf(stderr,
+			"Error: failed to write prolog to output file\n");
+		goto error;
+	}
+
+	ret = 0;
+
+error:
+	free(buf);
+	return ret;
+}
+
+int write_boot_image(uint8_t *buf, uint32_t image_size, FILE *out_fd)
+{
+	int aligned_size;
+	int written;
+
+	/* Image size must be aligned to 4 bytes */
+	aligned_size = (image_size + 3) & (~0x3);
+
+	written = fwrite(buf, aligned_size, 1, out_fd);
+	if (written != 1) {
+		fprintf(stderr, "Error: Failed to write boot image\n");
+		goto error;
+	}
+
+	return 0;
+error:
+	return 1;
+}
+
+int main(int argc, char *argv[])
+{
+	char in_file[MAX_FILENAME+1];
+	char out_file[MAX_FILENAME+1];
+	char ext_file[MAX_FILENAME+1];
+	FILE *in_fd = NULL;
+	FILE *out_fd = NULL;
+	int parse = 0;
+	int ext_cnt = 0;
+	int opt;
+	int ret = 0;
+	int image_size;
+	uint8_t *image_buf = NULL;
+	int read;
+	uint32_t nand_block_size_kb, mlc_nand;
+
+	/* Create temporary file for building extensions
+	 * Use process ID for allowing multiple parallel runs
+	 */
+	snprintf(ext_file, MAX_FILENAME, "/tmp/ext_file-%x", getpid());
+
+	while ((opt = getopt(argc, argv, "hpms:i:l:e:a:b:u:n:t:c:k:")) != -1) {
+		switch (opt) {
+		case 'h':
+			usage();
+			break;
+		case 'l':
+			opts.load_addr = strtoul(optarg, NULL, 0);
+			break;
+		case 'e':
+			opts.exec_addr = strtoul(optarg, NULL, 0);
+			break;
+		case 'm':
+			opts.disable_print = 1;
+			break;
+		case 'u':
+			opts.baudrate = strtoul(optarg, NULL, 0);
+			break;
+		case 'b':
+			strncpy(opts.bin_ext_file, optarg, MAX_FILENAME);
+			ext_cnt++;
+			break;
+		case 'p':
+			parse = 1;
+			break;
+		case 'n':
+			nand_block_size_kb = strtoul(optarg, NULL, 0);
+			opts.nfc_io_args |= (nand_block_size_kb / 64);
+			break;
+		case 't':
+			mlc_nand = 0;
+			if (!strncmp("MLC", optarg, 3))
+				mlc_nand = 1;
+			opts.nfc_io_args |= (mlc_nand << 8);
+			break;
+#ifdef CONFIG_MVEBU_SECURE_BOOT
+		case 'c': /* SEC extension */
+			strncpy(opts.sec_cfg_file, optarg, MAX_FILENAME);
+			ext_cnt++;
+			break;
+		case 'k':
+			opts.key_index = strtoul(optarg, NULL, 0);
+			break;
+#endif
+		default: /* '?' */
+			usage_err("Unknown argument");
+			exit(EXIT_FAILURE);
+		}
+	}
+
+	/* Check validity of inputes */
+	if (opts.load_addr % 8)
+		usage_err("Load address must be 8 bytes aligned");
+
+	if (opts.baudrate % 1200)
+		usage_err("Baudrate must be a multiple of 1200");
+
+	/* The remaining arguments are the input
+	 * and potentially output file
+	 */
+	/* Input file must exist so exit if not */
+	if (optind >= argc)
+		usage_err("missing input file name");
+
+	strncpy(in_file, argv[optind], MAX_FILENAME);
+	optind++;
+
+	/* Output file must exist in non parse mode */
+	if (optind < argc)
+		strncpy(out_file, argv[optind], MAX_FILENAME);
+	else if (!parse)
+		usage_err("missing output file name");
+
+	/* open the input file */
+	in_fd = fopen(in_file, "rb");
+	if (in_fd == NULL) {
+		printf("Error: Failed to open input file %s\n", in_file);
+		goto main_exit;
+	}
+
+	/* Read the input file to buffer */
+	image_size = get_file_size(in_file);
+	image_buf = calloc((image_size + AES_BLOCK_SZ - 1) &
+			   ~(AES_BLOCK_SZ - 1), 1);
+	if (image_buf == NULL) {
+		fprintf(stderr, "Error: failed allocating input buffer\n");
+		return 1;
+	}
+
+	read = fread(image_buf, image_size, 1, in_fd);
+	if (read != 1) {
+		fprintf(stderr, "Error: failed to read input file\n");
+		goto main_exit;
+	}
+
+	/* Parse the input image and leave */
+	if (parse) {
+		if (opts.key_index >= CSK_ARR_SZ) {
+			fprintf(stderr,
+				"Wrong key IDX value. Valid values 0 - %d\n",
+				CSK_ARR_SZ - 1);
+			goto main_exit;
+		}
+		ret = parse_image(image_buf, image_size);
+		goto main_exit;
+	}
+
+	/* Create a blob file from all extensions */
+	if (ext_cnt) {
+		ret = format_extensions(ext_file);
+		if (ret)
+			goto main_exit;
+	}
+
+	out_fd = fopen(out_file, "wb");
+	if (out_fd == NULL) {
+		fprintf(stderr,
+			"Error: Failed to open output file %s\n", out_file);
+		goto main_exit;
+	}
+
+	ret = write_prolog(ext_cnt, ext_file, image_buf, image_size, out_fd);
+	if (ret)
+		goto main_exit;
+
+#ifdef CONFIG_MVEBU_SECURE_BOOT
+	if (opts.sec_opts && (opts.sec_opts->encrypted_image != 0) &&
+	    (opts.sec_opts->enc_image_sz != 0)) {
+		ret = write_boot_image(opts.sec_opts->encrypted_image,
+				       opts.sec_opts->enc_image_sz, out_fd);
+	} else
+#endif
+		ret = write_boot_image(image_buf, image_size, out_fd);
+	if (ret)
+		goto main_exit;
+
+main_exit:
+	if (in_fd)
+		fclose(in_fd);
+
+	if (out_fd)
+		fclose(out_fd);
+
+	if (image_buf)
+		free(image_buf);
+
+	unlink(ext_file);
+
+#ifdef CONFIG_MVEBU_SECURE_BOOT
+	if (opts.sec_opts) {
+		if (opts.sec_opts->encrypted_image)
+			free(opts.sec_opts->encrypted_image);
+		free(opts.sec_opts);
+	}
+#endif
+	exit(ret);
+}
diff --git a/tools/doimage/doimage.mk b/tools/doimage/doimage.mk
new file mode 100644
index 00000000..2b751d40
--- /dev/null
+++ b/tools/doimage/doimage.mk
@@ -0,0 +1,15 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:     BSD-3-Clause
+# https://spdx.org/licenses
+
+DOIMAGE_FLAGS		?= 	-l 0x4100000 -e 0x4100000
+
+
+#NAND params
+#Open and update the below when using NAND as a boot device.
+
+CONFIG_MVEBU_NAND_BLOCK_SIZE	:= 256
+CONFIG_MVEBU_NAND_CELL_TYPE	:= SLC
+NAND_DOIMAGE_FLAGS := -t $(CONFIG_MVEBU_NAND_CELL_TYPE) -n $(CONFIG_MVEBU_NAND_BLOCK_SIZE)