diff options
Diffstat (limited to 'platform/drivers/inc/rdc.h')
-rw-r--r-- | platform/drivers/inc/rdc.h | 43 |
1 files changed, 28 insertions, 15 deletions
diff --git a/platform/drivers/inc/rdc.h b/platform/drivers/inc/rdc.h index 6259e78..872e39d 100644 --- a/platform/drivers/inc/rdc.h +++ b/platform/drivers/inc/rdc.h @@ -73,7 +73,9 @@ static inline uint32_t RDC_GetSelfDomainID(RDC_Type * base) * @brief Check whether memory region controlled by RDC is accessible after low power recovery * * @param base RDC base pointer. - * @return Memory region power status (true: on and accessible, false: off) + * @return Memory region power status. + * - true: on and accessible. + * - false: off. */ static inline bool RDC_IsMemPowered(RDC_Type * base) { @@ -84,7 +86,9 @@ static inline bool RDC_IsMemPowered(RDC_Type * base) * @brief Check whether there's pending RDC memory region restoration interrupt * * @param base RDC base pointer. - * @return RDC interrupt status (true: interrupt pending, false: no interrupt pending) + * @return RDC interrupt status + * - true: Interrupt pending. + * - false: No interrupt pending. */ static inline bool RDC_IsIntPending(RDC_Type * base) { @@ -105,7 +109,9 @@ static inline void RDC_ClearStatusFlag(RDC_Type * base) * @brief Set RDC interrupt mode * * @param base RDC base pointer - * @param enable RDC interrupt control (true: enable, false: disable) + * @param enable RDC interrupt control. + * - true: enable interrupt. + * - false: disable interrupt. */ static inline void RDC_SetIntCmd(RDC_Type * base, bool enable) { @@ -123,13 +129,14 @@ static inline void RDC_SetIntCmd(RDC_Type * base, bool enable) * @brief Set RDC domain ID for RDC master * * @param base RDC base pointer - * @param mda RDC master assignment (see _rdc_mda in rdc_defs_<device>.h) + * @param mda RDC master assignment (see @ref _rdc_mda in rdc_defs_<device>.h) * @param domainId RDC domain ID (0-3) * @param lock Whether to lock this setting? Once locked, no one can change the domain assignment until reset */ static inline void RDC_SetDomainID(RDC_Type * base, uint32_t mda, uint32_t domainId, bool lock) { assert (domainId <= RDC_MDA_DID_MASK); + base->MDA[mda] = RDC_MDA_DID(domainId) | (lock ? RDC_MDA_LCK_MASK : 0); } @@ -137,7 +144,7 @@ static inline void RDC_SetDomainID(RDC_Type * base, uint32_t mda, uint32_t domai * @brief Get RDC domain ID for RDC master * * @param base RDC base pointer - * @param mda RDC master assignment (see _rdc_mda in rdc_defs_<device>.h) + * @param mda RDC master assignment (see @ref _rdc_mda in rdc_defs_<device>.h) * @return RDC domain ID (0-3) */ static inline uint32_t RDC_GetDomainID(RDC_Type * base, uint32_t mda) @@ -149,7 +156,7 @@ static inline uint32_t RDC_GetDomainID(RDC_Type * base, uint32_t mda) * @brief Set RDC peripheral access permission for RDC domains * * @param base RDC base pointer - * @param pdap RDC peripheral assignment (see _rdc_pdap in rdc_defs_<device>.h) + * @param pdap RDC peripheral assignment (see @ref _rdc_pdap in rdc_defs_<device>.h) * @param perm RDC access permission from RDC domain to peripheral (byte: D3R D3W D2R D2W D1R D1W D0R D0W) * @param sreq Force acquiring SEMA42 to access this peripheral or not * @param lock Whether to lock this setting or not. Once locked, no one can change the RDC setting until reset @@ -163,7 +170,7 @@ static inline void RDC_SetPdapAccess(RDC_Type * base, uint32_t pdap, uint8_t per * @brief Get RDC peripheral access permission for RDC domains * * @param base RDC base pointer - * @param pdap RDC peripheral assignment (see _rdc_pdap in rdc_defs_<device>.h) + * @param pdap RDC peripheral assignment (see @ref _rdc_pdap in rdc_defs_<device>.h) * @return RDC access permission from RDC domain to peripheral (byte: D3R D3W D2R D2W D1R D1W D0R D0W) */ static inline uint8_t RDC_GetPdapAccess(RDC_Type * base, uint32_t pdap) @@ -175,8 +182,10 @@ static inline uint8_t RDC_GetPdapAccess(RDC_Type * base, uint32_t pdap) * @brief Check whether RDC semaphore is required to access the peripheral * * @param base RDC base pointer - * @param pdap RDC peripheral assignment (see _rdc_pdap in rdc_defs_<device>.h) - * @return RDC semaphore required or not (true: required, false: not required) + * @param pdap RDC peripheral assignment (see @ref _rdc_pdap in rdc_defs_<device>.h) + * @return RDC semaphore required or not. + * - true: RDC semaphore is required. + * - false: RDC semaphore is not required. */ static inline bool RDC_IsPdapSemaphoreRequired(RDC_Type * base, uint32_t pdap) { @@ -187,7 +196,7 @@ static inline bool RDC_IsPdapSemaphoreRequired(RDC_Type * base, uint32_t pdap) * @brief Set RDC memory region access permission for RDC domains * * @param base RDC base pointer - * @param mr RDC memory region assignment (see _rdc_mr in rdc_defs_<device>.h) + * @param mr RDC memory region assignment (see @ref _rdc_mr in rdc_defs_<device>.h) * @param startAddr memory region start address (inclusive) * @param endAddr memory region end address (exclusive) * @param perm RDC access permission from RDC domain to peripheral (byte: D3R D3W D2R D2W D1R D1W D0R D0W) @@ -201,7 +210,7 @@ void RDC_SetMrAccess(RDC_Type * base, uint32_t mr, uint32_t startAddr, uint32_t * @brief Get RDC memory region access permission for RDC domains * * @param base RDC base pointer - * @param mr RDC memory region assignment (see _rdc_mr in rdc_defs_<device>.h) + * @param mr RDC memory region assignment (see @ref _rdc_mr in rdc_defs_<device>.h) * @param startAddr pointer to get memory region start address (inclusive), NULL is allowed. * @param endAddr pointer to get memory region end address (exclusive), NULL is allowed. * @return RDC access permission from RDC domain to peripheral (byte: D3R D3W D2R D2W D1R D1W D0R D0W) @@ -214,7 +223,9 @@ uint8_t RDC_GetMrAccess(RDC_Type * base, uint32_t mr, uint32_t *startAddr, uint3 * * @param base RDC base pointer * @param mr RDC memory region assignment (see _rdc_mr in rdc_defs_<device>.h) - * @return Memory region enabled or not (true: enabled, false: not enabled) + * @return Memory region enabled or not. + * - true: Memory region is enabled. + * - false: Memory region is not enabled. */ static inline bool RDC_IsMrEnabled(RDC_Type * base, uint32_t mr) { @@ -225,10 +236,12 @@ static inline bool RDC_IsMrEnabled(RDC_Type * base, uint32_t mr) * @brief Get memory violation status * * @param base RDC base pointer - * @param mr RDC memory region assignment (see _rdc_mr in rdc_defs_<device>.h) + * @param mr RDC memory region assignment (see @ref _rdc_mr in rdc_defs_<device>.h) * @param violationAddr Pointer to store violation address, NULL allowed * @param violationDomain Pointer to store domain ID causing violation, NULL allowed - * @return Memory violation occured or not (true: violation happened, false: no violation happened) + * @return Memory violation occurred or not. + * - true: violation happened. + * - false: No violation happened. */ bool RDC_GetViolationStatus(RDC_Type * base, uint32_t mr, uint32_t *violationAddr, uint32_t *violationDomain); @@ -236,7 +249,7 @@ bool RDC_GetViolationStatus(RDC_Type * base, uint32_t mr, uint32_t *violationAdd * @brief Clear RDC violation status * * @param base RDC base pointer - * @param mr RDC memory region assignment (see _rdc_mr in rdc_defs_<device>.h) + * @param mr RDC memory region assignment (see @ref _rdc_mr in rdc_defs_<device>.h) */ static inline void RDC_ClearViolationStatus(RDC_Type * base, uint32_t mr) { |