diff options
Diffstat (limited to 'drivers/fsl_vref.h')
-rw-r--r-- | drivers/fsl_vref.h | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/drivers/fsl_vref.h b/drivers/fsl_vref.h index 349c124..6c6c014 100644 --- a/drivers/fsl_vref.h +++ b/drivers/fsl_vref.h @@ -1,6 +1,6 @@ /* * Copyright (c) 2015, Freescale Semiconductor, Inc. - * All rights reserved. + * Copyright 2016-2017 NXP * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: @@ -12,7 +12,7 @@ * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * - * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * o Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * @@ -78,8 +78,8 @@ typedef enum _vref_buffer_mode { kVREF_ModeBandgapOnly = 0U, /*!< Bandgap on only, for stabilization and startup */ #if defined(FSL_FEATURE_VREF_MODE_LV_TYPE) && FSL_FEATURE_VREF_MODE_LV_TYPE - kVREF_ModeHighPowerBuffer = 1U, /*!< High power buffer mode enabled */ - kVREF_ModeLowPowerBuffer = 2U /*!< Low power buffer mode enabled */ + kVREF_ModeHighPowerBuffer = 1U, /*!< High-power buffer mode enabled */ + kVREF_ModeLowPowerBuffer = 2U /*!< Low-power buffer mode enabled */ #else kVREF_ModeTightRegulationBuffer = 2U /*!< Tight regulation buffer enabled */ #endif /* FSL_FEATURE_VREF_MODE_LV_TYPE */ @@ -116,11 +116,11 @@ extern "C" { /*! * @brief Enables the clock gate and configures the VREF module according to the configuration structure. * - * This function must be called before calling all the other VREF driver functions, + * This function must be called before calling all other VREF driver functions, * read/write registers, and configurations with user-defined settings. * The example below shows how to set up vref_config_t parameters and - * how to call the VREF_Init function by passing in these parameters: - * Example: + * how to call the VREF_Init function by passing in these parameters. + * This is an example. * @code * vref_config_t vrefConfig; * vrefConfig.bufferMode = kVREF_ModeHighPowerBuffer; @@ -138,7 +138,7 @@ void VREF_Init(VREF_Type *base, const vref_config_t *config); * @brief Stops and disables the clock for the VREF module. * * This function should be called to shut down the module. - * Example: + * This is an example. * @code * vref_config_t vrefUserConfig; * VREF_Init(VREF); @@ -154,8 +154,8 @@ void VREF_Deinit(VREF_Type *base); /*! * @brief Initializes the VREF configuration structure. * - * This function initializes the VREF configuration structure to a default value. - * Example: + * This function initializes the VREF configuration structure to default values. + * This is an example. * @code * vrefConfig->bufferMode = kVREF_ModeHighPowerBuffer; * vrefConfig->enableExternalVoltRef = false; @@ -167,9 +167,9 @@ void VREF_Deinit(VREF_Type *base); void VREF_GetDefaultConfig(vref_config_t *config); /*! - * @brief Sets a TRIM value for reference voltage. + * @brief Sets a TRIM value for the reference voltage. * - * This function sets a TRIM value for reference voltage. + * This function sets a TRIM value for the reference voltage. * Note that the TRIM value maximum is 0x3F. * * @param base VREF peripheral address. @@ -192,9 +192,9 @@ static inline uint8_t VREF_GetTrimVal(VREF_Type *base) #if defined(FSL_FEATURE_VREF_HAS_TRM4) && FSL_FEATURE_VREF_HAS_TRM4 /*! - * @brief Sets a TRIM value for reference voltage (2V1). + * @brief Sets a TRIM value for the reference voltage (2V1). * - * This function sets a TRIM value for reference voltage (2V1). + * This function sets a TRIM value for the reference voltage (2V1). * Note that the TRIM value maximum is 0x3F. * * @param base VREF peripheral address. @@ -219,10 +219,10 @@ static inline uint8_t VREF_GetTrim2V1Val(VREF_Type *base) #if defined(FSL_FEATURE_VREF_HAS_LOW_REFERENCE) && FSL_FEATURE_VREF_HAS_LOW_REFERENCE /*! - * @brief Sets the TRIM value for low voltage reference. + * @brief Sets the TRIM value for the low voltage reference. * * This function sets the TRIM value for low reference voltage. - * NOTE: + * Note the following. * - The TRIM value maximum is 0x05U * - The values 111b and 110b are not valid/allowed. * |