1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
|
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2013-2019 Toradex, Inc.
*
* Configuration settings for the Toradex Apalis iMX6
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <linux/stringify.h>
#include "mx6_common.h"
#include <asm/arch/imx-regs.h>
#include <asm/mach-imx/gpio.h>
#ifdef CONFIG_SPL
#include "imx6_spl.h"
#endif
#define CONFIG_MXC_UART_BASE UART1_BASE
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 3
/*
* SATA Configs
*/
#ifdef CONFIG_CMD_SATA
#define CONFIG_LBA48
#endif
/* Network */
#define PHY_ANEG_TIMEOUT 15000 /* PHY needs longer aneg time */
/* USB Configs */
/* Host */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
/* Client */
#define CONFIG_USBD_HS
/* Framebuffer and LCD */
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
/* Command definition */
#undef CONFIG_IPADDR
#define CONFIG_IPADDR 192.168.10.2
#define CONFIG_NETMASK 255.255.255.0
#undef CONFIG_SERVERIP
#define CONFIG_SERVERIP 192.168.10.1
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 2) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#undef BOOTENV_RUN_NET_USB_START
#define BOOTENV_RUN_NET_USB_START ""
#else /* CONFIG_SPL_BUILD */
#define BOOTENV
#endif /* CONFIG_SPL_BUILD */
#define UBOOT_UPDATE \
"uboot_hwpart=1\0" \
"uboot_blk=8a\0" \
"uboot_spl_blk=2\0" \
"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
"setexpr blkcnt ${blkcnt} / 0x200\0" \
"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
"update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
"mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x20000000\0" \
"fdt_addr_r=0x12100000\0" \
"kernel_addr_r=0x11000000\0" \
"pxefile_addr_r=0x17100000\0" \
"ramdisk_addr_r=0x12200000\0" \
"scriptaddr=0x17000000\0"
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0:on root=/dev/nfs ro\0" \
"nfsboot=run setup; " \
"setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
"${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
"run nfsdtbload; dhcp ${kernel_addr_r} " \
"&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
#define FDT_FILE "imx6q-apalis-eval.dtb"
#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
#else
#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
"boot_file=zImage\0" \
"boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off vmalloc=400M\0" \
"fdt_file=" FDT_FILE "\0" \
"fdtfile=" FDT_FILE "\0" \
"fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
UBOOT_UPDATE \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"flash_eth.img && source ${loadaddr}\0" \
"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
"|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \
" ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
"setup=setenv setupargs fec_mac=${ethaddr} " \
"consoleblank=0 no_console_suspend=1 console=tty1 " \
"console=${console},${baudrate}n8\0 " \
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
"splashpos=m,m\0" \
"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"vidargs=mxc_hdmi.only_cea=1 fbmem=32M\0"
/* Miscellaneous configurable options */
#undef CONFIG_SYS_CBSIZE
#define CONFIG_SYS_CBSIZE 1024
#undef CONFIG_SYS_MAXARGS
#define CONFIG_SYS_MAXARGS 48
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#endif /* __CONFIG_H */
|
