summaryrefslogtreecommitdiff
path: root/drivers/video/orisetech_otm8009a.c
blob: 362bf6a6fe4f661b7c961873aca30dde3dd650f6 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
 * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
 *            Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics.
 *
 * This otm8009a panel driver is inspired from the Linux Kernel driver
 * drivers/gpu/drm/panel/panel-orisetech-otm8009a.c.
 */
#include <common.h>
#include <backlight.h>
#include <dm.h>
#include <mipi_dsi.h>
#include <panel.h>
#include <asm/gpio.h>
#include <dm/device_compat.h>
#include <linux/delay.h>
#include <power/regulator.h>

#define OTM8009A_BACKLIGHT_DEFAULT	240
#define OTM8009A_BACKLIGHT_MAX		255

/* Manufacturer Command Set */
#define MCS_ADRSFT	0x0000	/* Address Shift Function */
#define MCS_PANSET	0xB3A6	/* Panel Type Setting */
#define MCS_SD_CTRL	0xC0A2	/* Source Driver Timing Setting */
#define MCS_P_DRV_M	0xC0B4	/* Panel Driving Mode */
#define MCS_OSC_ADJ	0xC181	/* Oscillator Adjustment for Idle/Normal mode */
#define MCS_RGB_VID_SET	0xC1A1	/* RGB Video Mode Setting */
#define MCS_SD_PCH_CTRL	0xC480	/* Source Driver Precharge Control */
#define MCS_NO_DOC1	0xC48A	/* Command not documented */
#define MCS_PWR_CTRL1	0xC580	/* Power Control Setting 1 */
#define MCS_PWR_CTRL2	0xC590	/* Power Control Setting 2 for Normal Mode */
#define MCS_PWR_CTRL4	0xC5B0	/* Power Control Setting 4 for DC Voltage */
#define MCS_PANCTRLSET1	0xCB80	/* Panel Control Setting 1 */
#define MCS_PANCTRLSET2	0xCB90	/* Panel Control Setting 2 */
#define MCS_PANCTRLSET3	0xCBA0	/* Panel Control Setting 3 */
#define MCS_PANCTRLSET4	0xCBB0	/* Panel Control Setting 4 */
#define MCS_PANCTRLSET5	0xCBC0	/* Panel Control Setting 5 */
#define MCS_PANCTRLSET6	0xCBD0	/* Panel Control Setting 6 */
#define MCS_PANCTRLSET7	0xCBE0	/* Panel Control Setting 7 */
#define MCS_PANCTRLSET8	0xCBF0	/* Panel Control Setting 8 */
#define MCS_PANU2D1	0xCC80	/* Panel U2D Setting 1 */
#define MCS_PANU2D2	0xCC90	/* Panel U2D Setting 2 */
#define MCS_PANU2D3	0xCCA0	/* Panel U2D Setting 3 */
#define MCS_PAND2U1	0xCCB0	/* Panel D2U Setting 1 */
#define MCS_PAND2U2	0xCCC0	/* Panel D2U Setting 2 */
#define MCS_PAND2U3	0xCCD0	/* Panel D2U Setting 3 */
#define MCS_GOAVST	0xCE80	/* GOA VST Setting */
#define MCS_GOACLKA1	0xCEA0	/* GOA CLKA1 Setting */
#define MCS_GOACLKA3	0xCEB0	/* GOA CLKA3 Setting */
#define MCS_GOAECLK	0xCFC0	/* GOA ECLK Setting */
#define MCS_NO_DOC2	0xCFD0	/* Command not documented */
#define MCS_GVDDSET	0xD800	/* GVDD/NGVDD */
#define MCS_VCOMDC	0xD900	/* VCOM Voltage Setting */
#define MCS_GMCT2_2P	0xE100	/* Gamma Correction 2.2+ Setting */
#define MCS_GMCT2_2N	0xE200	/* Gamma Correction 2.2- Setting */
#define MCS_NO_DOC3	0xF5B6	/* Command not documented */
#define MCS_CMD2_ENA1	0xFF00	/* Enable Access Command2 "CMD2" */
#define MCS_CMD2_ENA2	0xFF80	/* Enable Access Orise Command2 */

struct otm8009a_panel_priv {
	struct udevice *reg;
	struct gpio_desc reset;
};

static const struct display_timing default_timing = {
	.pixelclock.typ		= 29700000,
	.hactive.typ		= 480,
	.hfront_porch.typ	= 98,
	.hback_porch.typ	= 98,
	.hsync_len.typ		= 32,
	.vactive.typ		= 800,
	.vfront_porch.typ	= 15,
	.vback_porch.typ	= 14,
	.vsync_len.typ		= 10,
};

static void otm8009a_dcs_write_buf(struct udevice *dev, const void *data,
				   size_t len)
{
	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
	struct mipi_dsi_device *device = plat->device;

	if (mipi_dsi_dcs_write_buffer(device, data, len) < 0)
		dev_err(dev, "mipi dsi dcs write buffer failed\n");
}

static void otm8009a_dcs_write_buf_hs(struct udevice *dev, const void *data,
				      size_t len)
{
	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
	struct mipi_dsi_device *device = plat->device;

	/* data will be sent in dsi hs mode (ie. no lpm) */
	device->mode_flags &= ~MIPI_DSI_MODE_LPM;

	if (mipi_dsi_dcs_write_buffer(device, data, len) < 0)
		dev_err(dev, "mipi dsi dcs write buffer failed\n");

	/* restore back the dsi lpm mode */
	device->mode_flags |= MIPI_DSI_MODE_LPM;
}

#define dcs_write_seq(dev, seq...)				\
({								\
	static const u8 d[] = { seq };				\
	otm8009a_dcs_write_buf(dev, d, ARRAY_SIZE(d));		\
})

#define dcs_write_seq_hs(dev, seq...)				\
({								\
	static const u8 d[] = { seq };				\
	otm8009a_dcs_write_buf_hs(dev, d, ARRAY_SIZE(d));	\
})

#define dcs_write_cmd_at(dev, cmd, seq...)		\
({							\
	static const u16 c = cmd;			\
	struct udevice *device = dev;			\
	dcs_write_seq(device, MCS_ADRSFT, (c) & 0xFF);	\
	dcs_write_seq(device, (c) >> 8, seq);		\
})

static int otm8009a_init_sequence(struct udevice *dev)
{
	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
	struct mipi_dsi_device *device = plat->device;
	int ret;

	/* Enter CMD2 */
	dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0x80, 0x09, 0x01);

	/* Enter Orise Command2 */
	dcs_write_cmd_at(dev, MCS_CMD2_ENA2, 0x80, 0x09);

	dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL, 0x30);
	mdelay(10);

	dcs_write_cmd_at(dev, MCS_NO_DOC1, 0x40);
	mdelay(10);

	dcs_write_cmd_at(dev, MCS_PWR_CTRL4 + 1, 0xA9);
	dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 1, 0x34);
	dcs_write_cmd_at(dev, MCS_P_DRV_M, 0x50);
	dcs_write_cmd_at(dev, MCS_VCOMDC, 0x4E);
	dcs_write_cmd_at(dev, MCS_OSC_ADJ, 0x66); /* 65Hz */
	dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 2, 0x01);
	dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 5, 0x34);
	dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 4, 0x33);
	dcs_write_cmd_at(dev, MCS_GVDDSET, 0x79, 0x79);
	dcs_write_cmd_at(dev, MCS_SD_CTRL + 1, 0x1B);
	dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 2, 0x83);
	dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL + 1, 0x83);
	dcs_write_cmd_at(dev, MCS_RGB_VID_SET, 0x0E);
	dcs_write_cmd_at(dev, MCS_PANSET, 0x00, 0x01);

	dcs_write_cmd_at(dev, MCS_GOAVST, 0x85, 0x01, 0x00, 0x84, 0x01, 0x00);
	dcs_write_cmd_at(dev, MCS_GOACLKA1, 0x18, 0x04, 0x03, 0x39, 0x00, 0x00,
			 0x00, 0x18, 0x03, 0x03, 0x3A, 0x00, 0x00, 0x00);
	dcs_write_cmd_at(dev, MCS_GOACLKA3, 0x18, 0x02, 0x03, 0x3B, 0x00, 0x00,
			 0x00, 0x18, 0x01, 0x03, 0x3C, 0x00, 0x00, 0x00);
	dcs_write_cmd_at(dev, MCS_GOAECLK, 0x01, 0x01, 0x20, 0x20, 0x00, 0x00,
			 0x01, 0x02, 0x00, 0x00);

	dcs_write_cmd_at(dev, MCS_NO_DOC2, 0x00);

	dcs_write_cmd_at(dev, MCS_PANCTRLSET1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
	dcs_write_cmd_at(dev, MCS_PANCTRLSET2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
			 0, 0, 0, 0, 0);
	dcs_write_cmd_at(dev, MCS_PANCTRLSET3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
			 0, 0, 0, 0, 0);
	dcs_write_cmd_at(dev, MCS_PANCTRLSET4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
	dcs_write_cmd_at(dev, MCS_PANCTRLSET5, 0, 4, 4, 4, 4, 4, 0, 0, 0, 0,
			 0, 0, 0, 0, 0);
	dcs_write_cmd_at(dev, MCS_PANCTRLSET6, 0, 0, 0, 0, 0, 0, 4, 4, 4, 4,
			 4, 0, 0, 0, 0);
	dcs_write_cmd_at(dev, MCS_PANCTRLSET7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
	dcs_write_cmd_at(dev, MCS_PANCTRLSET8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
			 0xFF, 0xFF, 0xFF, 0xFF, 0xFF);

	dcs_write_cmd_at(dev, MCS_PANU2D1, 0x00, 0x26, 0x09, 0x0B, 0x01, 0x25,
			 0x00, 0x00, 0x00, 0x00);
	dcs_write_cmd_at(dev, MCS_PANU2D2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			 0x00, 0x00, 0x00, 0x00, 0x00, 0x26, 0x0A, 0x0C, 0x02);
	dcs_write_cmd_at(dev, MCS_PANU2D3, 0x25, 0x00, 0x00, 0x00, 0x00, 0x00,
			 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
	dcs_write_cmd_at(dev, MCS_PAND2U1, 0x00, 0x25, 0x0C, 0x0A, 0x02, 0x26,
			 0x00, 0x00, 0x00, 0x00);
	dcs_write_cmd_at(dev, MCS_PAND2U2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			 0x00, 0x00, 0x00, 0x00, 0x00, 0x25, 0x0B, 0x09, 0x01);
	dcs_write_cmd_at(dev, MCS_PAND2U3, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00,
			 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);

	dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 1, 0x66);

	dcs_write_cmd_at(dev, MCS_NO_DOC3, 0x06);

	dcs_write_cmd_at(dev, MCS_GMCT2_2P, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
			 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
			 0x01);
	dcs_write_cmd_at(dev, MCS_GMCT2_2N, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
			 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
			 0x01);

	/* Exit CMD2 */
	dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0xFF, 0xFF, 0xFF);

	ret =  mipi_dsi_dcs_nop(device);
	if (ret)
		return ret;

	ret = mipi_dsi_dcs_exit_sleep_mode(device);
	if (ret)
		return ret;

	/* Wait for sleep out exit */
	mdelay(120);

	/* Default portrait 480x800 rgb24 */
	dcs_write_seq(dev, MIPI_DCS_SET_ADDRESS_MODE, 0x00);

	ret =  mipi_dsi_dcs_set_column_address(device, 0,
					       default_timing.hactive.typ - 1);
	if (ret)
		return ret;

	ret =  mipi_dsi_dcs_set_page_address(device, 0,
					     default_timing.vactive.typ - 1);
	if (ret)
		return ret;

	/* See otm8009a driver documentation for pixel format descriptions */
	ret =  mipi_dsi_dcs_set_pixel_format(device, MIPI_DCS_PIXEL_FMT_24BIT |
					     MIPI_DCS_PIXEL_FMT_24BIT << 4);
	if (ret)
		return ret;

	/* Disable CABC feature */
	dcs_write_seq(dev, MIPI_DCS_WRITE_POWER_SAVE, 0x00);

	ret = mipi_dsi_dcs_set_display_on(device);
	if (ret)
		return ret;

	ret = mipi_dsi_dcs_nop(device);
	if (ret)
		return ret;

	/* Send Command GRAM memory write (no parameters) */
	dcs_write_seq(dev, MIPI_DCS_WRITE_MEMORY_START);

	return 0;
}

static int otm8009a_panel_enable_backlight(struct udevice *dev)
{
	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
	struct mipi_dsi_device *device = plat->device;
	int ret;

	ret = mipi_dsi_attach(device);
	if (ret < 0)
		return ret;

	ret = otm8009a_init_sequence(dev);
	if (ret)
		return ret;

	/*
	 * Power on the backlight with the requested brightness
	 * Note We can not use mipi_dsi_dcs_set_display_brightness()
	 * as otm8009a driver support only 8-bit brightness (1 param).
	 */
	dcs_write_seq(dev, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
		      OTM8009A_BACKLIGHT_DEFAULT);

	/* Update Brightness Control & Backlight */
	dcs_write_seq(dev, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);

	/* Update Brightness Control & Backlight */
	dcs_write_seq_hs(dev, MIPI_DCS_WRITE_CONTROL_DISPLAY);

	/* Need to wait a few time before sending the first image */
	mdelay(10);

	return 0;
}

static int otm8009a_panel_get_display_timing(struct udevice *dev,
					     struct display_timing *timings)
{
	memcpy(timings, &default_timing, sizeof(*timings));

	return 0;
}

static int otm8009a_panel_ofdata_to_platdata(struct udevice *dev)
{
	struct otm8009a_panel_priv *priv = dev_get_priv(dev);
	int ret;

	if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
		ret =  device_get_supply_regulator(dev, "power-supply",
						   &priv->reg);
		if (ret && ret != -ENOENT) {
			dev_err(dev, "Warning: cannot get power supply\n");
			return ret;
		}
	}

	ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset,
				   GPIOD_IS_OUT);
	if (ret) {
		dev_err(dev, "warning: cannot get reset GPIO\n");
		if (ret != -ENOENT)
			return ret;
	}

	return 0;
}

static int otm8009a_panel_probe(struct udevice *dev)
{
	struct otm8009a_panel_priv *priv = dev_get_priv(dev);
	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
	int ret;

	if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) {
		dev_dbg(dev, "enable regulator '%s'\n", priv->reg->name);
		ret = regulator_set_enable(priv->reg, true);
		if (ret)
			return ret;
	}

	/* reset panel */
	dm_gpio_set_value(&priv->reset, true);
	mdelay(1); /* >50us */
	dm_gpio_set_value(&priv->reset, false);
	mdelay(10); /* >5ms */

	/* fill characteristics of DSI data link */
	plat->lanes = 2;
	plat->format = MIPI_DSI_FMT_RGB888;
	plat->mode_flags = MIPI_DSI_MODE_VIDEO |
			   MIPI_DSI_MODE_VIDEO_BURST |
			   MIPI_DSI_MODE_LPM;

	return 0;
}

static const struct panel_ops otm8009a_panel_ops = {
	.enable_backlight = otm8009a_panel_enable_backlight,
	.get_display_timing = otm8009a_panel_get_display_timing,
};

static const struct udevice_id otm8009a_panel_ids[] = {
	{ .compatible = "orisetech,otm8009a" },
	{ }
};

U_BOOT_DRIVER(otm8009a_panel) = {
	.name			  = "otm8009a_panel",
	.id			  = UCLASS_PANEL,
	.of_match		  = otm8009a_panel_ids,
	.ops			  = &otm8009a_panel_ops,
	.ofdata_to_platdata	  = otm8009a_panel_ofdata_to_platdata,
	.probe			  = otm8009a_panel_probe,
	.platdata_auto_alloc_size = sizeof(struct mipi_dsi_panel_plat),
	.priv_auto_alloc_size	= sizeof(struct otm8009a_panel_priv),
};