1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
|
/*
* (C) Copyright 2012
* Henrik Nordstrom <henrik@henriknordstrom.net>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <i2c.h>
#include <axp_pmic.h>
#include <errno.h>
#define AXP152_I2C_ADDR 0x32
static int pmic_bus_init(void)
{
return 0;
}
static int pmic_bus_read(u8 reg, u8 *data)
{
return i2c_read(AXP152_I2C_ADDR, reg, 1, data, 1);
}
static int pmic_bus_write(u8 reg, u8 data)
{
return i2c_write(AXP152_I2C_ADDR, reg, 1, &data, 1);
}
static u8 axp152_mvolt_to_target(int mvolt, int min, int max, int div)
{
if (mvolt < min)
mvolt = min;
else if (mvolt > max)
mvolt = max;
return (mvolt - min) / div;
}
int axp_set_dcdc1(enum axp152_dcdc1_voltages volt)
{
if (volt < AXP152_DCDC1_1V7 || volt > AXP152_DCDC1_3V5)
return -EINVAL;
return pmic_bus_write(AXP152_DCDC1_VOLTAGE, volt);
}
int axp_set_dcdc2(unsigned int mvolt)
{
int rc;
u8 current, target;
target = axp152_mvolt_to_target(mvolt, 700, 2275, 25);
/* Do we really need to be this gentle? It has built-in voltage slope */
while ((rc = pmic_bus_read(AXP152_DCDC2_VOLTAGE, ¤t)) == 0 &&
current != target) {
if (current < target)
current++;
else
current--;
rc = pmic_bus_write(AXP152_DCDC2_VOLTAGE, current);
if (rc)
break;
}
return rc;
}
int axp_set_dcdc3(unsigned int mvolt)
{
u8 target = axp152_mvolt_to_target(mvolt, 700, 3500, 50);
return pmic_bus_write(AXP152_DCDC3_VOLTAGE, target);
}
int axp_set_dcdc4(unsigned int mvolt)
{
u8 target = axp152_mvolt_to_target(mvolt, 700, 3500, 25);
return pmic_bus_write(AXP152_DCDC4_VOLTAGE, target);
}
int axp_set_ldo0(enum axp152_ldo0_volts volt, enum axp152_ldo0_curr_limit curr_limit)
{
u8 target = curr_limit | (volt << 4) | (1 << 7);
return pmic_bus_write(AXP152_LDO0_VOLTAGE, target);
}
int axp_disable_ldo0(void)
{
int ret;
u8 target;
ret = pmic_bus_read(AXP152_LDO0_VOLTAGE, &target);
if (ret)
return ret;
target &= ~(1 << 7);
return pmic_bus_write(AXP152_LDO0_VOLTAGE, target);
}
int axp_set_ldo1(unsigned int mvolt)
{
u8 target = axp152_mvolt_to_target(mvolt, 700, 3500, 100);
return pmic_bus_write(AXP152_LDO1_VOLTAGE, target);
}
int axp_set_ldo2(unsigned int mvolt)
{
u8 target = axp152_mvolt_to_target(mvolt, 700, 3500, 100);
return pmic_bus_write(AXP152_LDO2_VOLTAGE, target);
}
int axp_set_aldo1(enum axp152_aldo_voltages volt)
{
u8 val;
int ret;
ret = pmic_bus_read(AXP152_ALDO1_ALDO2_VOLTAGE, &val);
if (ret)
return ret;
val |= (volt << 4);
return pmic_bus_write(AXP152_ALDO1_ALDO2_VOLTAGE, val);
}
int axp_set_aldo2(enum axp152_aldo_voltages volt)
{
u8 val;
int ret;
ret = pmic_bus_read(AXP152_ALDO1_ALDO2_VOLTAGE, &val);
if (ret)
return ret;
val |= volt;
return pmic_bus_write(AXP152_ALDO1_ALDO2_VOLTAGE, val);
}
int axp_set_power_output(int val)
{
return pmic_bus_write(AXP152_POWER_CONTROL, val);
}
int axp_init(void)
{
u8 ver;
int rc;
int ret;
u8 reg;
rc = pmic_bus_init();
if (rc)
return rc;
rc = pmic_bus_read(AXP152_CHIP_VERSION, &ver);
if (rc)
return rc;
if (ver != 0x05)
return -EINVAL;
/* Set the power off sequence to `reverse of power on sequence` */
ret = pmic_bus_read(AXP152_SHUTDOWN, ®);
if (ret)
return ret;
reg |= AXP152_POWEROFF_SEQ;
ret = pmic_bus_write(AXP152_SHUTDOWN, reg);
if (ret)
return ret;
/* Enable the power recovery */
ret = pmic_bus_read(AXP152_POWER_RECOVERY, ®);
if (ret)
return ret;
reg |= AXP152_POWER_RECOVERY_EN;
ret = pmic_bus_write(AXP152_POWER_RECOVERY, reg);
return ret;
}
int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
pmic_bus_write(AXP152_SHUTDOWN, AXP152_POWEROFF);
/* infinite loop during shutdown */
while (1) {}
/* not reached */
return 0;
}
|
