1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
|
/*
* (C) Copyright 2012 SAMSUNG Electronics
* Jaehoon Chung <jh80.chung@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dwmmc.h>
#include <fdtdec.h>
#include <libfdt.h>
#include <malloc.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/clk.h>
#include <asm/arch/pinmux.h>
#define DWMMC_MAX_CH_NUM 4
#define DWMMC_MAX_FREQ 52000000
#define DWMMC_MIN_FREQ 400000
#define DWMMC_MMC0_CLKSEL_VAL 0x03030001
#define DWMMC_MMC2_CLKSEL_VAL 0x03020001
/*
* Function used as callback function to initialise the
* CLKSEL register for every mmc channel.
*/
static void exynos_dwmci_clksel(struct dwmci_host *host)
{
dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);
}
unsigned int exynos_dwmci_get_clk(int dev_index)
{
return get_mmc_clk(dev_index);
}
static void exynos_dwmci_board_init(struct dwmci_host *host)
{
if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) {
dwmci_writel(host, EMMCP_MPSBEGIN0, 0);
dwmci_writel(host, EMMCP_SEND0, 0);
dwmci_writel(host, EMMCP_CTRL0,
MPSCTRL_SECURE_READ_BIT |
MPSCTRL_SECURE_WRITE_BIT |
MPSCTRL_NON_SECURE_READ_BIT |
MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID);
}
}
/*
* This function adds the mmc channel to be registered with mmc core.
* index - mmc channel number.
* regbase - register base address of mmc channel specified in 'index'.
* bus_width - operating bus width of mmc channel specified in 'index'.
* clksel - value to be written into CLKSEL register in case of FDT.
* NULL in case od non-FDT.
*/
int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
{
struct dwmci_host *host = NULL;
unsigned int div;
unsigned long freq, sclk;
host = malloc(sizeof(struct dwmci_host));
if (!host) {
printf("dwmci_host malloc fail!\n");
return 1;
}
/* request mmc clock vlaue of 52MHz. */
freq = 52000000;
sclk = get_mmc_clk(index);
div = DIV_ROUND_UP(sclk, freq);
/* set the clock divisor for mmc */
set_mmc_clk(index, div);
host->name = "EXYNOS DWMMC";
host->ioaddr = (void *)regbase;
host->buswidth = bus_width;
#ifdef CONFIG_EXYNOS5420
host->quirks = DWMCI_QUIRK_DISABLE_SMU;
#endif
host->board_init = exynos_dwmci_board_init;
if (clksel) {
host->clksel_val = clksel;
} else {
if (0 == index)
host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
if (2 == index)
host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
}
host->clksel = exynos_dwmci_clksel;
host->dev_index = index;
host->get_mmc_clk = exynos_dwmci_get_clk;
/* Add the mmc channel to be registered with mmc core */
if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
debug("dwmmc%d registration failed\n", index);
return -1;
}
return 0;
}
#ifdef CONFIG_OF_CONTROL
int exynos_dwmmc_init(const void *blob)
{
int index, bus_width;
int node_list[DWMMC_MAX_CH_NUM];
int err = 0, dev_id, flag, count, i;
u32 clksel_val, base, timing[3];
count = fdtdec_find_aliases_for_id(blob, "mmc",
COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,
DWMMC_MAX_CH_NUM);
for (i = 0; i < count; i++) {
int node = node_list[i];
if (node <= 0)
continue;
/* Extract device id for each mmc channel */
dev_id = pinmux_decode_periph_id(blob, node);
/* Get the bus width from the device node */
bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
if (bus_width <= 0) {
debug("DWMMC: Can't get bus-width\n");
return -1;
}
if (8 == bus_width)
flag = PINMUX_FLAG_8BIT_MODE;
else
flag = PINMUX_FLAG_NONE;
/* config pinmux for each mmc channel */
err = exynos_pinmux_config(dev_id, flag);
if (err) {
debug("DWMMC not configured\n");
return err;
}
index = dev_id - PERIPH_ID_SDMMC0;
/* Get the base address from the device node */
base = fdtdec_get_addr(blob, node, "reg");
if (!base) {
debug("DWMMC: Can't get base address\n");
return -1;
}
/* Extract the timing info from the node */
err = fdtdec_get_int_array(blob, node, "samsung,timing",
timing, 3);
if (err) {
debug("Can't get sdr-timings for divider\n");
return -1;
}
clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
DWMCI_SET_DRV_CLK(timing[1]) |
DWMCI_SET_DIV_RATIO(timing[2]));
/* Initialise each mmc channel */
err = exynos_dwmci_add_port(index, base, bus_width, clksel_val);
if (err)
debug("dwmmc Channel-%d init failed\n", index);
}
return 0;
}
#endif
|
