summaryrefslogtreecommitdiff
path: root/drivers/ddr/marvell/a38x/ddr3_a38x.c
blob: c082122f25c38c4cc807e932af9d686a19eba78c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
/*
 * Copyright (C) Marvell International Ltd. and its affiliates
 *
 * SPDX-License-Identifier:	GPL-2.0
 */

#include <common.h>
#include <i2c.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>

#include "ddr3_init.h"

#define A38X_NUMBER_OF_INTERFACES	5

#define SAR_DEV_ID_OFFS			27
#define SAR_DEV_ID_MASK			0x7

/* Termal Sensor Registers */
#define TSEN_STATE_REG			0xe4070
#define TSEN_STATE_OFFSET		31
#define TSEN_STATE_MASK			(0x1 << TSEN_STATE_OFFSET)
#define TSEN_CONF_REG			0xe4074
#define TSEN_CONF_RST_OFFSET		8
#define TSEN_CONF_RST_MASK		(0x1 << TSEN_CONF_RST_OFFSET)
#define TSEN_STATUS_REG			0xe4078
#define TSEN_STATUS_READOUT_VALID_OFFSET	10
#define TSEN_STATUS_READOUT_VALID_MASK	(0x1 <<				\
					 TSEN_STATUS_READOUT_VALID_OFFSET)
#define TSEN_STATUS_TEMP_OUT_OFFSET	0
#define TSEN_STATUS_TEMP_OUT_MASK	(0x3ff << TSEN_STATUS_TEMP_OUT_OFFSET)

static struct dfx_access interface_map[] = {
	/* Pipe	Client */
	{ 0, 17 },
	{ 1, 7 },
	{ 1, 11 },
	{ 0, 3 },
	{ 1, 25 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 }
};

/* This array hold the board round trip delay (DQ and CK) per <interface,bus> */
struct trip_delay_element a38x_board_round_trip_delay_array[] = {
	/* 1st board */
	/* Interface bus DQS-delay CK-delay */
	{ 3952, 5060 },
	{ 3192, 4493 },
	{ 4785, 6677 },
	{ 3413, 7267 },
	{ 4282, 6086 },	/* ECC PUP */
	{ 3952, 5134 },
	{ 3192, 4567 },
	{ 4785, 6751 },
	{ 3413, 7341 },
	{ 4282, 6160 },	/* ECC PUP */

	/* 2nd board */
	/* Interface bus DQS-delay CK-delay */
	{ 3952, 5060 },
	{ 3192, 4493 },
	{ 4785, 6677 },
	{ 3413, 7267 },
	{ 4282, 6086 },	/* ECC PUP */
	{ 3952, 5134 },
	{ 3192, 4567 },
	{ 4785, 6751 },
	{ 3413, 7341 },
	{ 4282, 6160 }	/* ECC PUP */
};

#ifdef STATIC_ALGO_SUPPORT
/* package trace */
static struct trip_delay_element a38x_package_round_trip_delay_array[] = {
	/* IF BUS DQ_DELAY CK_DELAY */
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 },
	{ 0, 0 }
};

static int a38x_silicon_delay_offset[] = {
	/* board 0 */
	0,
	/* board 1 */
	0,
	/* board 2 */
	0
};
#endif

static u8 a38x_bw_per_freq[DDR_FREQ_LIMIT] = {
	0x3,			/* DDR_FREQ_100 */
	0x4,			/* DDR_FREQ_400 */
	0x4,			/* DDR_FREQ_533 */
	0x5,			/* DDR_FREQ_667 */
	0x5,			/* DDR_FREQ_800 */
	0x5,			/* DDR_FREQ_933 */
	0x5,			/* DDR_FREQ_1066 */
	0x3,			/* DDR_FREQ_311 */
	0x3,			/* DDR_FREQ_333 */
	0x4,			/* DDR_FREQ_467 */
	0x5,			/* DDR_FREQ_850 */
	0x5,			/* DDR_FREQ_600 */
	0x3,			/* DDR_FREQ_300 */
	0x5,			/* DDR_FREQ_900 */
	0x3,			/* DDR_FREQ_360 */
	0x5			/* DDR_FREQ_1000 */
};

static u8 a38x_rate_per_freq[DDR_FREQ_LIMIT] = {
	 /*TBD*/ 0x1,		/* DDR_FREQ_100 */
	0x2,			/* DDR_FREQ_400 */
	0x2,			/* DDR_FREQ_533 */
	0x2,			/* DDR_FREQ_667 */
	0x2,			/* DDR_FREQ_800 */
	0x3,			/* DDR_FREQ_933 */
	0x3,			/* DDR_FREQ_1066 */
	0x1,			/* DDR_FREQ_311 */
	0x1,			/* DDR_FREQ_333 */
	0x2,			/* DDR_FREQ_467 */
	0x2,			/* DDR_FREQ_850 */
	0x2,			/* DDR_FREQ_600 */
	0x1,			/* DDR_FREQ_300 */
	0x2,			/* DDR_FREQ_900 */
	0x1,			/* DDR_FREQ_360 */
	0x2			/* DDR_FREQ_1000 */
};

static u16 a38x_vco_freq_per_sar[] = {
	666,			/* 0 */
	1332,
	800,
	1600,
	1066,
	2132,
	1200,
	2400,
	1332,
	1332,
	1500,
	1500,
	1600,			/* 12 */
	1600,
	1700,
	1700,
	1866,
	1866,
	1800,			/* 18 */
	2000,
	2000,
	4000,
	2132,
	2132,
	2300,
	2300,
	2400,
	2400,
	2500,
	2500,
	800
};

u32 pipe_multicast_mask;

u32 dq_bit_map_2_phy_pin[] = {
	1, 0, 2, 6, 9, 8, 3, 7,	/* 0 */
	8, 9, 1, 7, 2, 6, 3, 0,	/* 1 */
	3, 9, 7, 8, 1, 0, 2, 6,	/* 2 */
	1, 0, 6, 2, 8, 3, 7, 9,	/* 3 */
	0, 1, 2, 9, 7, 8, 3, 6,	/* 4 */
};

static int ddr3_tip_a38x_set_divider(u8 dev_num, u32 if_id,
				     enum hws_ddr_freq freq);

/*
 * Read temperature TJ value
 */
u32 ddr3_ctrl_get_junc_temp(u8 dev_num)
{
	int reg = 0;

	/* Initiates TSEN hardware reset once */
	if ((reg_read(TSEN_CONF_REG) & TSEN_CONF_RST_MASK) == 0)
		reg_bit_set(TSEN_CONF_REG, TSEN_CONF_RST_MASK);
	mdelay(10);

	/* Check if the readout field is valid */
	if ((reg_read(TSEN_STATUS_REG) & TSEN_STATUS_READOUT_VALID_MASK) == 0) {
		printf("%s: TSEN not ready\n", __func__);
		return 0;
	}

	reg = reg_read(TSEN_STATUS_REG);
	reg = (reg & TSEN_STATUS_TEMP_OUT_MASK) >> TSEN_STATUS_TEMP_OUT_OFFSET;

	return ((((10000 * reg) / 21445) * 1000) - 272674) / 1000;
}

/*
 * Name:     ddr3_tip_a38x_get_freq_config.
 * Desc:
 * Args:
 * Notes:
 * Returns:  MV_OK if success, other error code if fail.
 */
int ddr3_tip_a38x_get_freq_config(u8 dev_num, enum hws_ddr_freq freq,
				  struct hws_tip_freq_config_info
				  *freq_config_info)
{
	if (a38x_bw_per_freq[freq] == 0xff)
		return MV_NOT_SUPPORTED;

	if (freq_config_info == NULL)
		return MV_BAD_PARAM;

	freq_config_info->bw_per_freq = a38x_bw_per_freq[freq];
	freq_config_info->rate_per_freq = a38x_rate_per_freq[freq];
	freq_config_info->is_supported = 1;

	return MV_OK;
}

/*
 * Name:     ddr3_tip_a38x_pipe_enable.
 * Desc:
 * Args:
 * Notes:
 * Returns:  MV_OK if success, other error code if fail.
 */
int ddr3_tip_a38x_pipe_enable(u8 dev_num, enum hws_access_type interface_access,
			      u32 if_id, int enable)
{
	u32 data_value, pipe_enable_mask = 0;

	if (enable == 0) {
		pipe_enable_mask = 0;
	} else {
		if (interface_access == ACCESS_TYPE_MULTICAST)
			pipe_enable_mask = pipe_multicast_mask;
		else
			pipe_enable_mask = (1 << interface_map[if_id].pipe);
	}

	CHECK_STATUS(ddr3_tip_reg_read
		     (dev_num, PIPE_ENABLE_ADDR, &data_value, MASK_ALL_BITS));
	data_value = (data_value & (~0xff)) | pipe_enable_mask;
	CHECK_STATUS(ddr3_tip_reg_write(dev_num, PIPE_ENABLE_ADDR, data_value));

	return MV_OK;
}

/*
 * Name:     ddr3_tip_a38x_if_write.
 * Desc:
 * Args:
 * Notes:
 * Returns:  MV_OK if success, other error code if fail.
 */
int ddr3_tip_a38x_if_write(u8 dev_num, enum hws_access_type interface_access,
			   u32 if_id, u32 reg_addr, u32 data_value,
			   u32 mask)
{
	u32 ui_data_read;

	if (mask != MASK_ALL_BITS) {
		CHECK_STATUS(ddr3_tip_a38x_if_read
			     (dev_num, ACCESS_TYPE_UNICAST, if_id, reg_addr,
			      &ui_data_read, MASK_ALL_BITS));
		data_value = (ui_data_read & (~mask)) | (data_value & mask);
	}

	reg_write(reg_addr, data_value);

	return MV_OK;
}

/*
 * Name:     ddr3_tip_a38x_if_read.
 * Desc:
 * Args:
 * Notes:
 * Returns:  MV_OK if success, other error code if fail.
 */
int ddr3_tip_a38x_if_read(u8 dev_num, enum hws_access_type interface_access,
			  u32 if_id, u32 reg_addr, u32 *data, u32 mask)
{
	*data = reg_read(reg_addr) & mask;

	return MV_OK;
}

/*
 * Name:     ddr3_tip_a38x_select_ddr_controller.
 * Desc:     Enable/Disable access to Marvell's server.
 * Args:     dev_num     - device number
 *           enable        - whether to enable or disable the server
 * Notes:
 * Returns:  MV_OK if success, other error code if fail.
 */
int ddr3_tip_a38x_select_ddr_controller(u8 dev_num, int enable)
{
	u32 reg;

	reg = reg_read(CS_ENABLE_REG);

	if (enable)
		reg |= (1 << 6);
	else
		reg &= ~(1 << 6);

	reg_write(CS_ENABLE_REG, reg);

	return MV_OK;
}

/*
 * Name:     ddr3_tip_init_a38x_silicon.
 * Desc:     init Training SW DB.
 * Args:
 * Notes:
 * Returns:  MV_OK if success, other error code if fail.
 */
static int ddr3_tip_init_a38x_silicon(u32 dev_num, u32 board_id)
{
	struct hws_tip_config_func_db config_func;
	enum hws_ddr_freq ddr_freq;
	int status;
	struct hws_topology_map *tm = ddr3_get_topology_map();

	/* new read leveling version */
	config_func.tip_dunit_read_func = ddr3_tip_a38x_if_read;
	config_func.tip_dunit_write_func = ddr3_tip_a38x_if_write;
	config_func.tip_dunit_mux_select_func =
		ddr3_tip_a38x_select_ddr_controller;
	config_func.tip_get_freq_config_info_func =
		ddr3_tip_a38x_get_freq_config;
	config_func.tip_set_freq_divider_func = ddr3_tip_a38x_set_divider;
	config_func.tip_get_device_info_func = ddr3_tip_a38x_get_device_info;
	config_func.tip_get_temperature = ddr3_ctrl_get_junc_temp;

	ddr3_tip_init_config_func(dev_num, &config_func);

	ddr3_tip_register_dq_table(dev_num, dq_bit_map_2_phy_pin);

#ifdef STATIC_ALGO_SUPPORT
	{
		struct hws_tip_static_config_info static_config;
		u32 board_offset =
		    board_id * A38X_NUMBER_OF_INTERFACES *
		    tm->num_of_bus_per_interface;

		static_config.silicon_delay =
			a38x_silicon_delay_offset[board_id];
		static_config.package_trace_arr =
			a38x_package_round_trip_delay_array;
		static_config.board_trace_arr =
			&a38x_board_round_trip_delay_array[board_offset];
		ddr3_tip_init_static_config_db(dev_num, &static_config);
	}
#endif
	status = ddr3_tip_a38x_get_init_freq(dev_num, &ddr_freq);
	if (MV_OK != status) {
		DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR,
				      ("DDR3 silicon get target frequency - FAILED 0x%x\n",
				       status));
		return status;
	}

	rl_version = 1;
	mask_tune_func = (SET_LOW_FREQ_MASK_BIT |
			  LOAD_PATTERN_MASK_BIT |
			  SET_MEDIUM_FREQ_MASK_BIT | WRITE_LEVELING_MASK_BIT |
			  /* LOAD_PATTERN_2_MASK_BIT | */
			  WRITE_LEVELING_SUPP_MASK_BIT |
			  READ_LEVELING_MASK_BIT |
			  PBS_RX_MASK_BIT |
			  PBS_TX_MASK_BIT |
			  SET_TARGET_FREQ_MASK_BIT |
			  WRITE_LEVELING_TF_MASK_BIT |
			  WRITE_LEVELING_SUPP_TF_MASK_BIT |
			  READ_LEVELING_TF_MASK_BIT |
			  CENTRALIZATION_RX_MASK_BIT |
			  CENTRALIZATION_TX_MASK_BIT);
	rl_mid_freq_wa = 1;

	if ((ddr_freq == DDR_FREQ_333) || (ddr_freq == DDR_FREQ_400)) {
		mask_tune_func = (WRITE_LEVELING_MASK_BIT |
				  LOAD_PATTERN_2_MASK_BIT |
				  WRITE_LEVELING_SUPP_MASK_BIT |
				  READ_LEVELING_MASK_BIT |
				  PBS_RX_MASK_BIT |
				  PBS_TX_MASK_BIT |
				  CENTRALIZATION_RX_MASK_BIT |
				  CENTRALIZATION_TX_MASK_BIT);
		rl_mid_freq_wa = 0; /* WA not needed if 333/400 is TF */
	}

	/* Supplementary not supported for ECC modes */
	if (1 == ddr3_if_ecc_enabled()) {
		mask_tune_func &= ~WRITE_LEVELING_SUPP_TF_MASK_BIT;
		mask_tune_func &= ~WRITE_LEVELING_SUPP_MASK_BIT;
		mask_tune_func &= ~PBS_TX_MASK_BIT;
		mask_tune_func &= ~PBS_RX_MASK_BIT;
	}

	if (ck_delay == -1)
		ck_delay = 160;
	if (ck_delay_16 == -1)
		ck_delay_16 = 160;
	ca_delay = 0;
	delay_enable = 1;

	calibration_update_control = 1;

	init_freq = tm->interface_params[first_active_if].memory_freq;

	ddr3_tip_a38x_get_medium_freq(dev_num, &medium_freq);

	return MV_OK;
}

int ddr3_a38x_update_topology_map(u32 dev_num, struct hws_topology_map *tm)
{
	u32 if_id = 0;
	enum hws_ddr_freq freq;

	ddr3_tip_a38x_get_init_freq(dev_num, &freq);
	tm->interface_params[if_id].memory_freq = freq;

	/*
	 * re-calc topology parameters according to topology updates
	 * (if needed)
	 */
	CHECK_STATUS(hws_ddr3_tip_load_topology_map(dev_num, tm));

	return MV_OK;
}

int ddr3_tip_init_a38x(u32 dev_num, u32 board_id)
{
	struct hws_topology_map *tm = ddr3_get_topology_map();

	if (NULL == tm)
		return MV_FAIL;

	ddr3_a38x_update_topology_map(dev_num, tm);
	ddr3_tip_init_a38x_silicon(dev_num, board_id);

	return MV_OK;
}

int ddr3_tip_a38x_get_init_freq(int dev_num, enum hws_ddr_freq *freq)
{
	u32 reg;

	/* Read sample at reset setting */
	reg = (reg_read(REG_DEVICE_SAR1_ADDR) >>
	       RST2_CPU_DDR_CLOCK_SELECT_IN_OFFSET) &
		RST2_CPU_DDR_CLOCK_SELECT_IN_MASK;
	switch (reg) {
	case 0x0:
	case 0x1:
		*freq = DDR_FREQ_333;
		break;
	case 0x2:
	case 0x3:
		*freq = DDR_FREQ_400;
		break;
	case 0x4:
	case 0xd:
		*freq = DDR_FREQ_533;
		break;
	case 0x6:
		*freq = DDR_FREQ_600;
		break;
	case 0x8:
	case 0x11:
	case 0x14:
		*freq = DDR_FREQ_667;
		break;
	case 0xc:
	case 0x15:
	case 0x1b:
		*freq = DDR_FREQ_800;
		break;
	case 0x10:
		*freq = DDR_FREQ_933;
		break;
	case 0x12:
		*freq = DDR_FREQ_900;
		break;
	case 0x13:
		*freq = DDR_FREQ_900;
		break;
	default:
		*freq = 0;
		return MV_NOT_SUPPORTED;
	}

	return MV_OK;
}

int ddr3_tip_a38x_get_medium_freq(int dev_num, enum hws_ddr_freq *freq)
{
	u32 reg;

	/* Read sample at reset setting */
	reg = (reg_read(REG_DEVICE_SAR1_ADDR) >>
	       RST2_CPU_DDR_CLOCK_SELECT_IN_OFFSET) &
		RST2_CPU_DDR_CLOCK_SELECT_IN_MASK;
	switch (reg) {
	case 0x0:
	case 0x1:
		/* Medium is same as TF to run PBS in this freq */
		*freq = DDR_FREQ_333;
		break;
	case 0x2:
	case 0x3:
		/* Medium is same as TF to run PBS in this freq */
		*freq = DDR_FREQ_400;
		break;
	case 0x4:
	case 0xd:
		*freq = DDR_FREQ_533;
		break;
	case 0x8:
	case 0x11:
	case 0x14:
		*freq = DDR_FREQ_333;
		break;
	case 0xc:
	case 0x15:
	case 0x1b:
		*freq = DDR_FREQ_400;
		break;
	case 0x6:
		*freq = DDR_FREQ_300;
		break;
	case 0x12:
		*freq = DDR_FREQ_360;
		break;
	case 0x13:
		*freq = DDR_FREQ_400;
		break;
	default:
		*freq = 0;
		return MV_NOT_SUPPORTED;
	}

	return MV_OK;
}

u32 ddr3_tip_get_init_freq(void)
{
	enum hws_ddr_freq freq;

	ddr3_tip_a38x_get_init_freq(0, &freq);

	return freq;
}

static int ddr3_tip_a38x_set_divider(u8 dev_num, u32 if_id,
				     enum hws_ddr_freq frequency)
{
	u32 divider = 0;
	u32 sar_val;

	if (if_id != 0) {
		DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR,
				      ("A38x does not support interface 0x%x\n",
				       if_id));
		return MV_BAD_PARAM;
	}

	/* get VCO freq index */
	sar_val = (reg_read(REG_DEVICE_SAR1_ADDR) >>
		   RST2_CPU_DDR_CLOCK_SELECT_IN_OFFSET) &
		RST2_CPU_DDR_CLOCK_SELECT_IN_MASK;
	divider = a38x_vco_freq_per_sar[sar_val] / freq_val[frequency];

	/* Set Sync mode */
	CHECK_STATUS(ddr3_tip_a38x_if_write
		     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x20220, 0x0,
		      0x1000));
	CHECK_STATUS(ddr3_tip_a38x_if_write
		     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe42f4, 0x0,
		      0x200));

	/* cpupll_clkdiv_reset_mask */
	CHECK_STATUS(ddr3_tip_a38x_if_write
		     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4264, 0x1f,
		      0xff));

	/* cpupll_clkdiv_reload_smooth */
	CHECK_STATUS(ddr3_tip_a38x_if_write
		     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4260,
		      (0x2 << 8), (0xff << 8)));

	/* cpupll_clkdiv_relax_en */
	CHECK_STATUS(ddr3_tip_a38x_if_write
		     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4260,
		      (0x2 << 24), (0xff << 24)));

	/* write the divider */
	CHECK_STATUS(ddr3_tip_a38x_if_write
		     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4268,
		      (divider << 8), (0x3f << 8)));

	/* set cpupll_clkdiv_reload_ratio */
	CHECK_STATUS(ddr3_tip_a38x_if_write
		     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4264,
		      (1 << 8), (1 << 8)));

	/* undet cpupll_clkdiv_reload_ratio */
	CHECK_STATUS(ddr3_tip_a38x_if_write
		     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4264, 0,
		      (1 << 8)));

	/* clear cpupll_clkdiv_reload_force */
	CHECK_STATUS(ddr3_tip_a38x_if_write
		     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4260, 0,
		      (0xff << 8)));

	/* clear cpupll_clkdiv_relax_en */
	CHECK_STATUS(ddr3_tip_a38x_if_write
		     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4260, 0,
		      (0xff << 24)));

	/* clear cpupll_clkdiv_reset_mask */
	CHECK_STATUS(ddr3_tip_a38x_if_write
		     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4264, 0,
		      0xff));

	/* Dunit training clock + 1:1 mode */
	if ((frequency == DDR_FREQ_LOW_FREQ) || (freq_val[frequency] <= 400)) {
		CHECK_STATUS(ddr3_tip_a38x_if_write
			     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x18488,
			      (1 << 16), (1 << 16)));
		CHECK_STATUS(ddr3_tip_a38x_if_write
			     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1524,
			      (0 << 15), (1 << 15)));
	} else {
		CHECK_STATUS(ddr3_tip_a38x_if_write
			     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x18488,
			      0, (1 << 16)));
		CHECK_STATUS(ddr3_tip_a38x_if_write
			     (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1524,
			      (1 << 15), (1 << 15)));
	}

	return MV_OK;
}

/*
 * external read from memory
 */
int ddr3_tip_ext_read(u32 dev_num, u32 if_id, u32 reg_addr,
		      u32 num_of_bursts, u32 *data)
{
	u32 burst_num;

	for (burst_num = 0; burst_num < num_of_bursts * 8; burst_num++)
		data[burst_num] = readl(reg_addr + 4 * burst_num);

	return MV_OK;
}

/*
 * external write to memory
 */
int ddr3_tip_ext_write(u32 dev_num, u32 if_id, u32 reg_addr,
		       u32 num_of_bursts, u32 *data) {
	u32 burst_num;

	for (burst_num = 0; burst_num < num_of_bursts * 8; burst_num++)
		writel(data[burst_num], reg_addr + 4 * burst_num);

	return MV_OK;
}

int ddr3_silicon_pre_init(void)
{
	return ddr3_silicon_init();
}

int ddr3_post_run_alg(void)
{
	return MV_OK;
}

int ddr3_silicon_post_init(void)
{
	struct hws_topology_map *tm = ddr3_get_topology_map();

	/* Set half bus width */
	if (DDR3_IS_16BIT_DRAM_MODE(tm->bus_act_mask)) {
		CHECK_STATUS(ddr3_tip_if_write
			     (0, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
			      REG_SDRAM_CONFIG_ADDR, 0x0, 0x8000));
	}

	return MV_OK;
}

int ddr3_tip_a38x_get_device_info(u8 dev_num, struct ddr3_device_info *info_ptr)
{
	info_ptr->device_id = 0x6800;
	info_ptr->ck_delay = ck_delay;

	return MV_OK;
}