blob: 40324ffe5f34188ac4265a7e87fbd49c0f00a838 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
This document describes the instruction to build and flash ATF/OPTEE/U-Boot on
pico-imx7d board. U-Boot is loaded as part of FIP image by ATF in this setup.
The boot sequence is ATF -> OPTEE -> U-Boot -> Linux. U-Boot is in non-secure
world in this case.
- Build u-boot
Set environment variable of CROSS_COMPILE for your toolchain and ARCH=arm
$ make pico-imx7d_bl33_defconfig
$ make all
- Download and build OPTEE
$ git clone git@github.com:OP-TEE/optee_os.git
$ make PLATFORM=imx PLATFORM_FLAVOR=mx7dpico_mbl CFG_BOOT_SECONDARY_REQUEST=y ARCH=arm
- Download and build ATF
$ git clone https://git.linaro.org/landing-teams/working/mbl/arm-trusted-firmware.git -b linaro-imx7
$ make DEBUG=1 PLAT=picopi ARCH=aarch32 ARM_ARCH_MAJOR=7 \
CROSS_COMPILE=arm-linux-gnueabihf- LOG_LEVEL=50 V=1 \
CRASH_REPORTING=1 AARCH32_SP=optee all
Save file content in this link to file pico-imx7d.cfg:
http://git.linaro.org/landing-teams/working/mbl/u-boot.git/tree/board/technexion/pico-imx7d/pico-imx7d.cfg?h=linaro-imx
$ u-boot/tools/mkimage -n pico-imx7d.cfg -T imximage -e 0x9df00000 -d \
build/picopi/debug/bl2.bin bl2.imx
- Create FIP image
Create a fiptool_images/ folder in ATF folder, copy u-boot.bin in u-boot
folder and tee*.bin in optee out/arm-plat-imx/core/tee/ folder to
fiptool_images. Run below command in ATF folder to generate FIP image.
$ make -C tools/fiptool/
$ tools/fiptool/fiptool create --tos-fw fiptool_images/tee-header_v2.bin \
--tos-fw-extra1 fiptool_images/tee-pager_v2.bin \
--tos-fw-extra2 fiptool_images/tee-pageable_v2.bin \
--nt-fw fiptool_images/u-boot.bin \
fip.bin
- Burn the images to eMMC for test.
Run below command in atf folder:
$ dd if=build/picopi/debug/bl2.bin.imx of=/dev/disk/by-id/usb-<your device> bs=1024 seek=1;sync
$ dd if=fip.bin of=/dev/disk/by-id/usb-<your device> bs=1024 seek=1;sync
- Test
Just boot up your board and wait for u-boot start up after ATF's log.
For booting Linux in FIT image, please reference the FIT files in
u-boot doc/uImage.FIT/ folder.
|
