1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2019 Western Digital Corporation or its affiliates.
*
* Authors:
* Anup Patel <anup.patel@wdc.com>
*/
#include <common.h>
#include <dm.h>
#include <init.h>
#include <linux/delay.h>
#include <linux/io.h>
#ifdef CONFIG_MISC_INIT_R
#define FU540_OTP_BASE_ADDR 0x10070000
struct fu540_otp_regs {
u32 pa; /* Address input */
u32 paio; /* Program address input */
u32 pas; /* Program redundancy cell selection input */
u32 pce; /* OTP Macro enable input */
u32 pclk; /* Clock input */
u32 pdin; /* Write data input */
u32 pdout; /* Read data output */
u32 pdstb; /* Deep standby mode enable input (active low) */
u32 pprog; /* Program mode enable input */
u32 ptc; /* Test column enable input */
u32 ptm; /* Test mode enable input */
u32 ptm_rep;/* Repair function test mode enable input */
u32 ptr; /* Test row enable input */
u32 ptrim; /* Repair function enable input */
u32 pwe; /* Write enable input (defines program cycle) */
} __packed;
#define BYTES_PER_FUSE 4
#define NUM_FUSES 0x1000
static int fu540_otp_read(int offset, void *buf, int size)
{
struct fu540_otp_regs *regs = (void __iomem *)FU540_OTP_BASE_ADDR;
unsigned int i;
int fuseidx = offset / BYTES_PER_FUSE;
int fusecount = size / BYTES_PER_FUSE;
u32 fusebuf[fusecount];
/* check bounds */
if (offset < 0 || size < 0)
return -EINVAL;
if (fuseidx >= NUM_FUSES)
return -EINVAL;
if ((fuseidx + fusecount) > NUM_FUSES)
return -EINVAL;
/* init OTP */
writel(0x01, ®s->pdstb); /* wake up from stand-by */
writel(0x01, ®s->ptrim); /* enable repair function */
writel(0x01, ®s->pce); /* enable input */
/* read all requested fuses */
for (i = 0; i < fusecount; i++, fuseidx++) {
writel(fuseidx, ®s->pa);
/* cycle clock to read */
writel(0x01, ®s->pclk);
mdelay(1);
writel(0x00, ®s->pclk);
mdelay(1);
/* read the value */
fusebuf[i] = readl(®s->pdout);
}
/* shut down */
writel(0, ®s->pce);
writel(0, ®s->ptrim);
writel(0, ®s->pdstb);
/* copy out */
memcpy(buf, fusebuf, size);
return 0;
}
static u32 fu540_read_serialnum(void)
{
int ret;
u32 serial[2] = {0};
for (int i = 0xfe * 4; i > 0; i -= 8) {
ret = fu540_otp_read(i, serial, sizeof(serial));
if (ret) {
printf("%s: error reading from OTP\n", __func__);
break;
}
if (serial[0] == ~serial[1])
return serial[0];
}
return 0;
}
static void fu540_setup_macaddr(u32 serialnum)
{
/* Default MAC address */
unsigned char mac[6] = { 0x70, 0xb3, 0xd5, 0x92, 0xf0, 0x00 };
/*
* We derive our board MAC address by ORing last three bytes
* of board serial number to above default MAC address.
*
* This logic of deriving board MAC address is taken from
* SiFive FSBL and is kept unchanged.
*/
mac[5] |= (serialnum >> 0) & 0xff;
mac[4] |= (serialnum >> 8) & 0xff;
mac[3] |= (serialnum >> 16) & 0xff;
/* Update environment variable */
eth_env_set_enetaddr("ethaddr", mac);
}
int misc_init_r(void)
{
u32 serial_num;
char buf[9] = {0};
/* Set ethaddr environment variable from board serial number */
if (!env_get("serial#")) {
serial_num = fu540_read_serialnum();
if (!serial_num) {
WARN(true, "Board serial number should not be 0 !!\n");
return 0;
}
snprintf(buf, sizeof(buf), "%08x", serial_num);
env_set("serial#", buf);
fu540_setup_macaddr(serial_num);
}
return 0;
}
#endif
int board_init(void)
{
/* For now nothing to do here. */
return 0;
}
|
