summaryrefslogtreecommitdiff
path: root/board/evb4510/memsetup.S
blob: 915af1e9e608db39f39af3617664bca04886267d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
/*
 * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
 * Curt Brune <curt@cucy.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */


#include <config.h>
#include <version.h>
#include <asm/hardware.h>

/***********************************************************************
 * Configure Memory Map
 *
 * This memory map allows us to relocate from FLASH to SRAM.  After
 * power-on reset the CPU only knows about the FLASH memory at address
 * 0x00000000.	After memsetup completes the memory map will be:
 *
 * Memory Addr
 * 0x00000000
 *     to	8MB SRAM (U5) -- 8MB Map
 * 0x00800000
 *
 * 0x01000000
 *     to	2MB Flash @ 0x00000000 (U7) -- 2MB Map
 * 0x01200000
 *
 * 0x02000000
 *     to	512KB Flash @ 0x02000000 (U9) -- 2MB Map
 * 0x02080000
 *
 * Load all 12 memory registers with the STMIA instruction since
 * memory access is disabled once these registers are written.	The
 * last register written re-enables memory access.  For more info see
 * the user's manual for the S3C4510B, available from Samsung's web
 * site.  Search for part number "S3C4510B".
 *
 ***********************************************************************/

.globl memsetup
memsetup:

	/* preserve the temp register (r12 AKA ip) and remap it. */
	ldr r1, =SRAM_BASE+0xC
	add r0, r12, #0x01000000
	str r0, [r1]

	/* remap the link register for when we return */
	add lr, lr, #0x01000000

	/* store a short program in the on chip SRAM, which is
	 * unaffected when remapping memory.  Note the cache must be
	 * disabled for the on chip SRAM to be available.
	 */
	ldr r1, =SRAM_BASE
	ldr r0, =0xe8801ffe  /* stmia r0, {r1-r12} */
	str r0, [r1]
	add r1, r1, #4
	ldr r0, =0xe59fc000  /* ldr r12, [pc, #0]  */
	str r0, [r1]
	add r1, r1, #4
	ldr r0, =0xe1a0f00e  /* mov pc, lr	   */
	str r0, [r1]

	adr   r0, memory_map_data
	ldmia r0, {r1-r12}
	ldr   r0, =REG_EXTDBWTH

	ldr pc, =SRAM_BASE

.globl reset_cpu
reset_cpu:
	/*
	 * reset the cpu by re-mapping FLASH 0 to 0x0 and jumping to
	 * address 0x0.	 We accomplish this by storing a few
	 * instructions into the on chip SRAM (8KB) and run from
	 * there.  Note the cache must be disabled for the on chip
	 * SRAM to be available.
	 *
	 * load r2 with REG_ROMCON0
	 * load r3 with 0x12040060	   configure FLASH bank 0 @ 0x00000000
	 * load r4 with REG_DRAMCON0
	 * load r5 with 0x08000380	   configure   RAM bank 0 @ 0x01000000
	 * load r6 with REG_REFEXTCON
	 * load r7 with 0x9c218360
	 * load r8 with 0x0
	 * store str r3,[r2] @ SRAM_BASE
	 * store str r5,[r4] @ SRAM_BASE + 0x4
	 * store str r7,[r6] @ SRAM_BASE + 0x8
	 * store mov pc,r8   @ SRAM_BASE + 0xC
	 * mov pc, SRAM_BASE
	 *
	 */

	/* disable cache */
	ldr r0, =REG_SYSCFG
	ldr r1, =0x83ffffa0	/* cache-disabled  */
	str r1, [r0]

	ldr r2, =REG_ROMCON0
	ldr r3, =0x02000060	/* Bank0 2MB FLASH   @ 0x00000000 */
	ldr r4, =REG_DRAMCON0
	ldr r5, =0x18040380	/* DRAM0 8MB SRAM    @ 0x01000000 */
	ldr r6, =REG_REFEXTCON
	ldr r7, =0xce278360
	ldr r8, =0x00000000
	ldr r1, =SRAM_BASE
	ldr r0, =0xe5823000	/* str	r3, [r2] */
	str r0, [r1]
	ldr r1, =SRAM_BASE+4
	ldr r0, =0xe5845000	/* str	r5, [r4] */
	str r0, [r1]
	ldr r1, =SRAM_BASE+8
	ldr r0, =0xe5867000	/* str	r7, [r6] */
	str r0, [r1]
	ldr r1, =SRAM_BASE+0xC
	ldr r0, =0xe1a0f008	/* mov	pc, r8	 */
	str r0, [r1]
	ldr r1, =SRAM_BASE
	mov pc, r1

	/* never return */

/************************************************************************
 * Below are twelve 32-bit values for the twelve memory registers of
 * the system manager, starting with register REG_EXTDBWTH.
 ***********************************************************************/
memory_map_data:
	.long 0x00f03005     /* memory widths */
	.long 0x12040060     /* Bank0 2MB FLASH	  @ 0x01000000 */
	.long 0x22080060     /* Bank1 512KB FLASH @ 0x02000000 */
	.long 0x00000000
	.long 0x00000000
	.long 0x00000000
	.long 0x00000000
	.long 0x08000380     /* DRAM0 8MB SRAM	  @ 0x00000000 */
	.long 0x00000000
	.long 0x00000000
	.long 0x00000000
	.long 0x9c218360     /* enable memory */