1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017 Microchip Corporation
* Wenyou.Yang <wenyou.yang@microchip.com>
*/
#include <common.h>
#include <debug_uart.h>
#include <fdtdec.h>
#include <init.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/atmel_pio4.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/atmel_sdhci.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/sama5d2.h>
extern void at91_pda_detect(void);
DECLARE_GLOBAL_DATA_PTR;
static void rgb_leds_init(void)
{
atmel_pio4_set_pio_output(AT91_PIO_PORTA, 10, 0); /* LED RED */
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 1, 0); /* LED GREEN */
atmel_pio4_set_pio_output(AT91_PIO_PORTA, 31, 1); /* LED BLUE */
}
#ifdef CONFIG_CMD_USB
static void board_usb_hw_init(void)
{
atmel_pio4_set_pio_output(AT91_PIO_PORTA, 27, 1);
}
#endif
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_VIDEO
at91_video_show_board_info();
#endif
at91_pda_detect();
return 0;
}
#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
static void board_uart1_hw_init(void)
{
atmel_pio4_set_a_periph(AT91_PIO_PORTD, 2, ATMEL_PIO_PUEN_MASK); /* URXD1 */
atmel_pio4_set_a_periph(AT91_PIO_PORTD, 3, 0); /* UTXD1 */
at91_periph_clk_enable(ATMEL_ID_UART1);
}
void board_debug_uart_init(void)
{
board_uart1_hw_init();
}
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
return 0;
}
#endif
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
rgb_leds_init();
#ifdef CONFIG_CMD_USB
board_usb_hw_init();
#endif
return 0;
}
int dram_init_banksize(void)
{
return fdtdec_setup_memory_banksize();
}
int dram_init(void)
{
return fdtdec_setup_mem_size_base();
}
#define MAC24AA_MAC_OFFSET 0xfa
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
#ifdef CONFIG_I2C_EEPROM
at91_set_ethaddr(MAC24AA_MAC_OFFSET);
#endif
return 0;
}
#endif
/* SPL */
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
}
static void ddrc_conf(struct atmel_mpddrc_config *ddrc)
{
ddrc->md = (ATMEL_MPDDRC_MD_DBW_16_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
ddrc->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
ATMEL_MPDDRC_CR_NR_ROW_13 |
ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
ATMEL_MPDDRC_CR_DIC_DS |
ATMEL_MPDDRC_CR_ZQ_LONG |
ATMEL_MPDDRC_CR_NB_8BANKS |
ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
ddrc->rtr = 0x511;
ddrc->tpr0 = ((7 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET) |
(3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET) |
(3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET) |
(9 << ATMEL_MPDDRC_TPR0_TRC_OFFSET) |
(3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET) |
(4 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET) |
(4 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET) |
(2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET));
ddrc->tpr1 = ((22 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET) |
(23 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET) |
(200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET) |
(3 << ATMEL_MPDDRC_TPR1_TXP_OFFSET));
ddrc->tpr2 = ((2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET) |
(8 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET) |
(4 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET) |
(4 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET) |
(8 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET));
}
void mem_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
struct atmel_mpddrc_config ddrc_config;
u32 reg;
ddrc_conf(&ddrc_config);
at91_periph_clk_enable(ATMEL_ID_MPDDRC);
writel(AT91_PMC_DDR, &pmc->scer);
reg = readl(&mpddrc->io_calibr);
reg &= ~ATMEL_MPDDRC_IO_CALIBR_RDIV;
reg |= ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55;
reg &= ~ATMEL_MPDDRC_IO_CALIBR_TZQIO;
reg |= ATMEL_MPDDRC_IO_CALIBR_TZQIO_(101);
writel(reg, &mpddrc->io_calibr);
writel(ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_ONE_CYCLE,
&mpddrc->rd_data_path);
ddr3_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddrc_config);
writel(0x3, &mpddrc->cal_mr4);
writel(64, &mpddrc->tim_cal);
}
void at91_pmc_init(void)
{
u32 tmp;
/*
* while coming from the ROM code, we run on PLLA @ 492 MHz / 164 MHz
* so we need to slow down and configure MCKR accordingly.
* This is why we have a special flavor of the switching function.
*/
tmp = AT91_PMC_MCKR_PLLADIV_2 |
AT91_PMC_MCKR_MDIV_3 |
AT91_PMC_MCKR_CSS_MAIN;
at91_mck_init_down(tmp);
tmp = AT91_PMC_PLLAR_29 |
AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
AT91_PMC_PLLXR_MUL(40) |
AT91_PMC_PLLXR_DIV(1);
at91_plla_init(tmp);
tmp = AT91_PMC_MCKR_H32MXDIV |
AT91_PMC_MCKR_PLLADIV_2 |
AT91_PMC_MCKR_MDIV_3 |
AT91_PMC_MCKR_CSS_PLLA;
at91_mck_init(tmp);
}
#endif
|
