1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
|
#
# Copyright 2020 NXP
#
# SPDX-License-Identifier: GPL-2.0+
#
Specifying extra IOMMU mappings for PCI controllers
This feature can be enabled through the PCI_IOMMU_EXTRA_MAPPINGS Kconfig option.
The "pci_iommu_extra" env var or "pci-iommu-extra" device tree property (to be
used for example in more static scenarios such as hardwired PCI endpoints that
get initialized later in the system setup) allows two things:
- for a SRIOV capable PCI EP identified by its B.D.F specify the maximum number
of VFs that will ever be created for it
- for hot-plug case, specify the B.D.F with which the device will show up on
the PCI bus
The env var consists of a list of <bdf>,<action> pairs for a certain pci bus
identified by its controller's base register address, as defined in the "reg"
property in the device tree.
pci_iommu_extra = pci@<addr1>,<bdf>,<action>,<bdf>,<action>,
pci@<addr2>,<bdf>,<action>,<bdf>,<action>,...
where:
<addr> is the base register address of the pci controller for which the
subsequent <bdf>,<action> pairs apply
<bdf> identifies to which B.D.F the action applies to
<action> can be:
- "vfs=<number>" to specify that for the PCI EP identified previously by
the <bdf> to include mappings for <number> of VFs.
The variant "noari_vfs=<number>" is available to disable taking ARI into
account.
- "hp" to specify that on this <bdf> there will be a hot-plugged device so
it needs a mapping
The device tree property must be placed under the correct pci controller node
and only the bdf and action pairs need to be specified, like this:
pci-iommu-extra = "<bdf>,<action>,<bdf>,<action>,...";
Note: the env var has priority over the device tree property.
For example, given this configuration on bus 6:
=> pci 6
Scanning PCI devices on bus 6
BusDevFun VendorId DeviceId Device Class Sub-Class
_____________________________________________________________
06.00.00 0x8086 0x1572 Network controller 0x00
06.00.01 0x8086 0x1572 Network controller 0x00
The following u-boot env var will create iommu mappings for 3 VFs for each PF:
=> setenv pci_iommu_extra pci@0x3800000,6.0.0,vfs=3,6.0.1,vfs=3
For the device tree case, this would be specified like this:
pci-iommu-extra = "6.0.0,vfs=3,6.0.1,vfs=3";
To add an iommu mapping for a hot-plugged device, please see following example:
=> setenv pci_iommu_extra pci@0x3800000,2.16.0,hp
For the device tree case, this would be specified like this:
pci-iommu-extra = "2.16.0,hp";
|
