#include <environment/ti/ti_armv7_common.env>
#include <environment/ti/mmc.env>
#include <environment/ti/ufs.env>
#include <environment/ti/k3_dfu.env>
#include <environment/ti/ospi_nand.env>

#if CONFIG_CMD_REMOTEPROC
#include <environment/ti/k3_rproc.env>
#endif

default_device_tree=ti/k3-j721s2-common-proc-board.dtb
findfdt=
	setenv name_fdt ${default_device_tree};
	if test $board_name = j721s2; then			\
		setenv name_fdt ti/k3-j721s2-common-proc-board.dtb; fi;
	if test $board_name = am68-sk; then
		setenv name_fdt ti/k3-am68-sk-base-board.dtb; fi;
	setenv fdtfile ${name_fdt}
name_kern=Image
console=ttyS2,115200n8
args_all=setenv optargs earlycon=ns16550a,mmio32,0x02880000
	${mtdparts}
run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}

boot=mmc
mmcdev=1
dorprocboot=1
bootpart=1:2
bootdir=/boot
#if CONFIG_SYS_K3_SPL_ATF
#if CONFIG_TARGET_J721S2_R5_EVM
addr_mcur5f0_0load=0x89000000
name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw
#endif
#endif
rd_spec=-

rproc_fw_binaries= 1 /lib/firmware/j721s2-mcu-r5f0_1-fw 2 /lib/firmware/j721s2-main-r5f0_0-fw 3 /lib/firmware/j721s2-main-r5f0_1-fw 4 /lib/firmware/j721s2-main-r5f1_0-fw 5 /lib/firmware/j721s2-main-r5f1_1-fw 6 /lib/firmware/j721s2-c71_0-fw 7 /lib/firmware/j721s2-c71_1-fw

mtdids=nor0=47040000.spi.0,nand0=spi-nand0
mtdparts=mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern)