// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2018 Technexion Ltd. * * Author: Richard Hu */ #include #include #include #include #include #include #if defined(CONFIG_SPL_BUILD) #ifdef CONFIG_SPL_OS_BOOT int spl_start_uboot(void) { return 0; } #endif static struct ddrc ddrc_regs_val = { .mstr = 0x01040001, .rfshtmg = 0x00400046, .init1 = 0x00690000, .init0 = 0x00020083, .init3 = 0x09300004, .init4 = 0x04080000, .init5 = 0x00100004, .rankctl = 0x0000033F, .dramtmg0 = 0x09081109, .dramtmg1 = 0x0007020d, .dramtmg2 = 0x03040407, .dramtmg3 = 0x00002006, .dramtmg4 = 0x04020205, .dramtmg5 = 0x03030202, .dramtmg8 = 0x00000803, .zqctl0 = 0x00800020, .dfitmg0 = 0x02098204, .dfitmg1 = 0x00030303, .dfiupd0 = 0x80400003, .dfiupd1 = 0x00100020, .dfiupd2 = 0x80100004, .addrmap4 = 0x00000F0F, .odtcfg = 0x06000604, .odtmap = 0x00000001, .rfshtmg = 0x00400046, .dramtmg0 = 0x09081109, .addrmap0 = 0x0000001f, .addrmap1 = 0x00080808, .addrmap4 = 0x00000f0f, .addrmap5 = 0x07070707, .addrmap6 = 0x0f0f0707, }; static struct ddrc_mp ddrc_mp_val = { .pctrl_0 = 0x00000001, }; static struct ddr_phy ddr_phy_regs_val = { .phy_con0 = 0x17420f40, .phy_con1 = 0x10210100, .phy_con4 = 0x00060807, .mdll_con0 = 0x1010007e, .drvds_con0 = 0x00000d6e, .cmd_sdll_con0 = 0x00000010, .offset_lp_con0 = 0x0000000f, .offset_rd_con0 = 0x08080808, .offset_wr_con0 = 0x08080808, }; static struct mx7_calibration calib_param = { .num_val = 5, .values = { 0x0E407304, 0x0E447304, 0x0E447306, 0x0E447304, 0x0E447304, }, }; static void gpr_init(void) { struct iomuxc_gpr_base_regs *gpr_regs = (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; writel(0x4F400005, &gpr_regs->gpr[1]); } static bool is_1g(void) { gpio_direction_input(IMX_GPIO_NR(1, 12)); return !gpio_get_value(IMX_GPIO_NR(1, 12)); } static void ddr_init(void) { if (is_1g()) ddrc_regs_val.addrmap6 = 0x0f070707; mx7_dram_cfg(&ddrc_regs_val, &ddrc_mp_val, &ddr_phy_regs_val, &calib_param); } void board_init_f(ulong dummy) { arch_cpu_init(); gpr_init(); board_early_init_f(); timer_init(); preloader_console_init(); ddr_init(); memset(__bss_start, 0, __bss_end - __bss_start); board_init_r(NULL, 0); } void reset_cpu(ulong addr) { } #endif