/dts-v1/;

/memreserve/ 0x1c000000 0x04000000;
/include/ "tegra30.dtsi"

/ {
	model = "Google Waluigi";
	compatible = "google,waluigi", "nvidia,tegra30";

	config {
		silent_console = <0>;
		odmdata = <0x300d8011>;
		hwid = "ARM WALUIGI TEST 6231";
		machine-arch-id = <3591>;
	};

	aliases {
		console = "/serial@70006300";
                usb0 = "/usb@0x7d000000";
                usb1 = "/usb@0x7d008000";

		sdmmc0 = "/sdhci@78000600";
		sdmmc1 = "/sdhci@78000000";

		i2c0 = "/i2c@0x7000d000";
		i2c1 = "/i2c@0x7000c000";
		i2c2 = "/i2c@0x7000c400";
		i2c3 = "/i2c@0x7000c500";
	};

	chosen {
		bootargs = "";
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0xc0000000>;
	};

	serial@70006300 {
		status = "ok";
		/*
		 * TBD - use CONFIG_SYS_PLLP_BASE_IS_408MHZ somehow here.
		 * Currently I put this back to 216MHz in fdt_decode.c
		 */
		clock-frequency = <408000000>;
	};

	/* External SD card - SDMMC1 */
	sdhci@78000000 {
		status = "ok";
		width = <4>;	/* width of SDIO port */
		removable = <1>;
		/* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */
		cd-gpio = <&gpio 69 0>; /* card detect, GMI_IORDY => I.05 */
		wp-gpio = <&gpio 155 0>; /* write protect, VI_D11 => T.03 */
		power-gpio = <&gpio 31 3>; /* power enable, VI_HSYNC => D.07 */
	};

	/* Internal eMMC - SDMMC4 */
	emmc: sdhci@78000600 {
		status = "ok";
		width = <4>;	/* width of SDIO port */
		removable = <0>;
		power-gpio = <&gpio 25 3>; /* power enable, gpio PD1 */
	};

	lcd {
		compatible = "nvidia,tegra2-lcd";
		width = <1280>;
		height = <800>;
		bits_per_pixel = <16>;
		pwfm = <&pwfm0>;
		display = <&display1>;
		frame-buffer = <0x1C022000>;

		pixel_clock = <68000000>;

		/* Timing: ref_to_sync, sync_width. back_porch, front_porch */
		horiz_timing = <0 30 52 64>;
		vert_timing = <12 5 20 25>;

		/* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */
		backlight-vdd = <&gpio 56 3>;		/* PH0, LCD1_BL_PWM */
		backlight-enable = <&gpio 58 3>;	/* PH2, LCD1_BL_EN */
		lvds-shutdown = <&gpio 90 3>;		/* PL2, LVDS1_SHTDN */
		panel-vdd = <&gpio 92 3>;		/* PL4, EN_VDD_PNL1 */

		/*
		 * Panel required timings
		 * Timing 1: delay between panel_vdd-rise and data-rise
		 * Timing 2: delay between data-rise and backlight_vdd-rise
		 * Timing 3: delay between backlight_vdd and pwm-rise
		 */

		panel-timings = <0 0 0 0>;
	};

	usb@0x7d008000 {
		status = "ok";
		host-mode = <1>;
	};

	usbphy: usbphy@0 {
		compatible = "smsc,usb3315";
		status = "ok";
	};

	usb@0x7d000000 {
		status = "ok";
		utmi = <&usbphy>;
		host-mode = <0>;

		/* Third value bit 0=1 output, 0 input; bit 1=1 high, 0 low */
		vbus-gpio = <&gpio 238 0>;
		vbus-pullup-gpio = <&gpio 233 3>;
	};
};