// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ * * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458 */ /dts-v1/; #include #include #include "k3-j784s4.dtsi" / { compatible = "ti,j784s4-evm", "ti,j784s4"; model = "Texas Instruments J784S4 EVM"; chosen { stdout-path = "serial2:115200n8"; }; aliases { serial2 = &main_uart8; mmc0 = &main_sdhci0; mmc1 = &main_sdhci1; i2c0 = &main_i2c0; }; memory@80000000 { device_type = "memory"; /* 32G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>, <0x00000008 0x80000000 0x00000007 0x80000000>; bootph-pre-ram; }; reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; secure_ddr: optee@9e800000 { reg = <0x00 0x9e800000 0x00 0x01800000>; no-map; }; mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; main_r5fss0_core0_memory_region: r5f-memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; main_r5fss0_core1_memory_region: r5f-memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; main_r5fss1_core0_memory_region: r5f-memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5000000 0x00 0x100000>; no-map; }; main_r5fss1_core1_memory_region: r5f-memory@a5100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5100000 0x00 0xf00000>; no-map; }; main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; no-map; }; main_r5fss2_core0_memory_region: r5f-memory@a6100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6100000 0x00 0xf00000>; no-map; }; main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7000000 0x00 0x100000>; no-map; }; main_r5fss2_core1_memory_region: r5f-memory@a7100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7100000 0x00 0xf00000>; no-map; }; c71_0_dma_memory_region: c71-dma-memory@a8000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8000000 0x00 0x100000>; no-map; }; c71_0_memory_region: c71-memory@a8100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8100000 0x00 0xf00000>; no-map; }; c71_1_dma_memory_region: c71-dma-memory@a9000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa9000000 0x00 0x100000>; no-map; }; c71_1_memory_region: c71-memory@a9100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa9100000 0x00 0xf00000>; no-map; }; c71_2_dma_memory_region: c71-dma-memory@aa000000 { compatible = "shared-dma-pool"; reg = <0x00 0xaa000000 0x00 0x100000>; no-map; }; c71_2_memory_region: c71-memory@aa100000 { compatible = "shared-dma-pool"; reg = <0x00 0xaa100000 0x00 0xf00000>; no-map; }; c71_3_dma_memory_region: c71-dma-memory@ab000000 { compatible = "shared-dma-pool"; reg = <0x00 0xab000000 0x00 0x100000>; no-map; }; c71_3_memory_region: c71-memory@ab100000 { compatible = "shared-dma-pool"; reg = <0x00 0xab100000 0x00 0xf00000>; no-map; }; }; evm_12v0: regulator-evm12v0 { /* main supply */ compatible = "regulator-fixed"; regulator-name = "evm_12v0"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; regulator-always-on; regulator-boot-on; }; vsys_3v3: regulator-vsys3v3 { /* Output of LM5140 */ compatible = "regulator-fixed"; regulator-name = "vsys_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&evm_12v0>; regulator-always-on; regulator-boot-on; }; vsys_5v0: regulator-vsys5v0 { /* Output of LM5140 */ compatible = "regulator-fixed"; regulator-name = "vsys_5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&evm_12v0>; regulator-always-on; regulator-boot-on; }; vdd_mmc1: regulator-sd { /* Output of TPS22918 */ compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; enable-active-high; vin-supply = <&vsys_3v3>; gpio = <&exp2 2 GPIO_ACTIVE_HIGH>; }; vdd_sd_dv: regulator-TLV71033 { /* Output of TLV71033 */ compatible = "regulator-gpio"; regulator-name = "tlv71033"; pinctrl-names = "default"; pinctrl-0 = <&vdd_sd_dv_pins_default>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; vin-supply = <&vsys_5v0>; gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>; states = <1800000 0x0>, <3300000 0x1>; }; }; &main_pmx0 { main_uart8_pins_default: main-uart8-pins-default { pinctrl-single,pins = < J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */ J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */ J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */ J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */ >; }; main_i2c0_pins_default: main-i2c0-pins-default { pinctrl-single,pins = < J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ >; }; main_mmc1_pins_default: main-mmc1-pins-default { pinctrl-single,pins = < J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */ J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */ J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */ J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */ J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */ J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */ >; }; vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { pinctrl-single,pins = < J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */ >; }; main_usbss0_pins_default: main-usbss0-pins-default { pinctrl-single,pins = < J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */ >; }; }; &wkup_pmx2 { mcu_cpsw_pins_default: mcu-cpsw-pins-default { pinctrl-single,pins = < J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ >; }; mcu_mdio_pins_default: mcu-mdio-pins-default { pinctrl-single,pins = < J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ >; }; mcu_uart0_pins_default: mcu-uart0-pins-default { pinctrl-single,pins = < J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) MCU_UART0_CTSn */ J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) MCU_UART0_RTSn */ J784S4_WKUP_IOPAD(0x08C, PIN_INPUT, 0) /* (K38) MCU_UART0_RXD */ J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) MCU_UART0_TXD */ >; }; wkup_uart0_pins_default: wkup-uart0-pins-default { pinctrl-single,pins = < J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_UART0_CTSn */ J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_UART0_RTSn */ J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */ >; }; wkup_gpio_pins_default: wkup_gpio_pins_default { pinctrl-single,pins = < J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 7) /* (L37) WKUP_GPIO0_6 */ >; }; }; &wkup_pmx0 { typec_dir_gpio_pins_default: typec-dir-gpio-pins-default { pinctrl-single,pins = < /* (A33) MCU_OSPI0_CSn1.WKUP_GPIO0_28 */ J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 7) >; }; mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { pinctrl-single,pins = < J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */ J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */ J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */ J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */ J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */ J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ >; }; }; &wkup_pmx1 { mcu_fss0_ospi0_pins1_default: mcu-fss0-ospi0-pins1-default { pinctrl-single,pins = < J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_RESET_OUT0 */ J784S4_WKUP_IOPAD(0x004, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_ECC_FAIL */ >; }; mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default { pinctrl-single,pins = < J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */ J784S4_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */ J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */ J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */ J784S4_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */ J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */ J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */ J784S4_WKUP_IOPAD(0x00C, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */ >; }; }; &main_uart8 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart8_pins_default>; }; &main_i2c0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; exp1: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; gpio-line-names = "PCIE1_2L_MODE_SEL", "PCIE1_4L_PERSTZ", "PCIE1_2L_RC_RSTZ", "PCIE1_2L_EP_RST_EN", "PCIE0_4L_MODE_SEL", "PCIE0_4L_PERSTZ", "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#", "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3", "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ"; }; exp2: gpio@22 { compatible = "ti,tca6424"; reg = <0x22>; gpio-controller; #gpio-cells = <2>; gpio-line-names = "R_GPIO_RGMII1_RST", "ENET2_I2CMUX_SEL", "GPIO_USD_PWR_EN", "USBC_PWR_EN", "USBC_MODE_SEL1", "USBC_MODE_SEL0", "GPIO_LIN_EN", "R_CAN_STB", "CTRL_PM_I2C_OE#", "ENET2_EXP_PWRDN", "ENET2_EXP_SPARE2", "CDCI2_RSTZ", "USB2.0_MUX_SEL", "CANUART_MUX_SEL0", "CANUART_MUX2_SEL1", "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ", "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ", "USER_INPUT1", "USER_LED1", "USER_LED2"; }; }; &main_sdhci0 { /* eMMC */ status = "okay"; non-removable; ti,driver-strength-ohm = <50>; disable-wp; }; &main_sdhci1 { /* SD card */ status = "okay"; pinctrl-0 = <&main_mmc1_pins_default>; pinctrl-names = "default"; disable-wp; vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vdd_sd_dv>; }; &main_gpio0 { status = "okay"; }; &mcu_cpsw { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default>; }; &davinci_mdio { pinctrl-names = "default"; pinctrl-0 = <&mcu_mdio_pins_default>; mcu_phy0: ethernet-phy@0 { reg = <0>; ti,rx-internal-delay = ; ti,fifo-depth = ; ti,min-output-impedance; }; }; &mcu_cpsw_port1 { status = "okay"; phy-mode = "rgmii-rxid"; phy-handle = <&mcu_phy0>; }; &mailbox0_cluster0 { status = "okay"; interrupts = <436>; mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { ti,mbox-rx = <2 0 0>; ti,mbox-tx = <3 0 0>; }; }; &mailbox0_cluster1 { status = "okay"; interrupts = <432>; mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { ti,mbox-rx = <2 0 0>; ti,mbox-tx = <3 0 0>; }; }; &mailbox0_cluster2 { status = "okay"; interrupts = <428>; mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { ti,mbox-rx = <2 0 0>; ti,mbox-tx = <3 0 0>; }; }; &mailbox0_cluster3 { status = "okay"; interrupts = <424>; mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 { ti,mbox-rx = <2 0 0>; ti,mbox-tx = <3 0 0>; }; }; &mailbox0_cluster4 { status = "okay"; interrupts = <420>; mbox_c71_0: mbox-c71-0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; mbox_c71_1: mbox-c71-1 { ti,mbox-rx = <2 0 0>; ti,mbox-tx = <3 0 0>; }; }; &mailbox0_cluster5 { status = "okay"; interrupts = <416>; mbox_c71_2: mbox-c71-2 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; mbox_c71_3: mbox-c71-3 { ti,mbox-rx = <2 0 0>; ti,mbox-tx = <3 0 0>; }; }; &mcu_r5fss0_core0 { status = "okay"; mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { status = "okay"; mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { status = "okay"; mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { status = "okay"; mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { status = "okay"; mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { status = "okay"; mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &main_r5fss2_core0 { status = "okay"; mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>; memory-region = <&main_r5fss2_core0_dma_memory_region>, <&main_r5fss2_core0_memory_region>; }; &main_r5fss2_core1 { status = "okay"; mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>; memory-region = <&main_r5fss2_core1_dma_memory_region>, <&main_r5fss2_core1_memory_region>; }; &c71_0 { status = "okay"; mboxes = <&mailbox0_cluster4 &mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; &c71_1 { status = "okay"; mboxes = <&mailbox0_cluster4 &mbox_c71_1>; memory-region = <&c71_1_dma_memory_region>, <&c71_1_memory_region>; }; &c71_2 { status = "okay"; mboxes = <&mailbox0_cluster5 &mbox_c71_2>; memory-region = <&c71_2_dma_memory_region>, <&c71_2_memory_region>; }; &c71_3 { status = "okay"; mboxes = <&mailbox0_cluster5 &mbox_c71_3>; memory-region = <&c71_3_dma_memory_region>, <&c71_3_memory_region>; }; &serdes_ln_ctrl { idle-states = , , , , , , , , , ; }; &serdes_refclk { clock-frequency = <100000000>; }; &serdes0 { status = "okay"; serdes0_usb_link: phy@3 { reg = <3>; cdns,num-lanes = <1>; #phy-cells = <0>; cdns,phy-type = ; resets = <&serdes_wiz0 4>; }; }; &serdes_wiz0 { status = "okay"; }; &usb_serdes_mux { idle-states = <0>; /* USB0 to SERDES lane 3 */ }; &usbss0 { status = "okay"; pinctrl-0 = <&main_usbss0_pins_default>; pinctrl-names = "default"; ti,vbus-divider; }; &usb0 { dr_mode = "otg"; maximum-speed = "super-speed"; phys = <&serdes0_usb_link>; phy-names = "cdns3,usb3-phy"; }; &ospi0 { pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_pins1_default>; ospi0_nor: flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; spi-rx-bus-width = <8>; spi-max-frequency = <25000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; cdns,phy-mode; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "ospi.tiboot3"; reg = <0x0 0x100000>; }; partition@100000 { label = "ospi.tispl"; reg = <0x100000 0x200000>; }; partition@300000 { label = "ospi.u-boot"; reg = <0x300000 0x400000>; }; partition@700000 { label = "ospi.env"; reg = <0x700000 0x40000>; }; partition@740000 { label = "ospi.env.backup"; reg = <0x740000 0x40000>; }; partition@800000 { label = "ospi.rootfs"; reg = <0x800000 0x37c0000>; }; partition@3fc0000 { label = "ospi.phypattern"; reg = <0x3fc0000 0x40000>; }; }; }; ospi0_nand: nand@0 { compatible = "spi-nand"; reg = <0x0>; spi-tx-bus-width = <8>; spi-rx-bus-width = <8>; spi-max-frequency = <25000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <2>; status = "disabled"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "ospi_nand.tiboot3"; reg = <0x0 0x100000>; }; partition@100000 { label = "ospi_nand.tispl"; reg = <0x100000 0x200000>; }; partition@300000 { label = "ospi_nand.u-boot"; reg = <0x300000 0x400000>; }; partition@700000 { label = "ospi_nand.env"; reg = <0x700000 0x40000>; }; partition@740000 { label = "ospi_nand.env.backup"; reg = <0x740000 0x40000>; }; partition@2000000 { label = "ospi_nand.rootfs"; reg = <0x2000000 0x5fc0000>; }; partition@7fc0000 { label = "ospi_nand.phypattern"; reg = <0x7fc0000 0x40000>; }; }; }; }; &wkup_gpio0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&wkup_gpio_pins_default>; }; &ospi1 { pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; ospi1_nor: flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <40000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <2>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "qspi.tiboot3"; reg = <0x0 0x80000>; }; partition@80000 { label = "qspi.tispl"; reg = <0x80000 0x200000>; }; partition@280000 { label = "qspi.u-boot"; reg = <0x280000 0x400000>; }; partition@680000 { label = "qspi.env"; reg = <0x680000 0x40000>; }; partition@6c0000 { label = "qspi.env.backup"; reg = <0x6c0000 0x40000>; }; partition@800000 { label = "qspi.rootfs"; reg = <0x800000 0x37c0000>; }; partition@3fc0000 { label = "qspi.phypattern"; reg = <0x3fc0000 0x40000>; }; }; }; };