From ec081c2c190148b374e86a795fb6b1c49caeb549 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 17 Oct 2008 12:51:46 +0200 Subject: ppc4xx: PPC44x MQ initialization Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC values. This fixes the occasional 440SPe hard locking issues when the 440SPe's dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver). Previously the appropriate initialization had been made in Linux, by the ppc440spe ADMA driver, which is wrong because modifying the MQ configuration registers after normal operation has begun is not supported and could have unpredictable results. Comment from Stefan: This patch doesn't change the resulting value of the MQ registers. It explicitly sets/clears all bits to the desired state which better documents the resulting register value instead of relying on pre-set default values. Signed-off-by: Yuri Tikhonov Signed-off-by: Stefan Roese --- include/asm-ppc/ppc4xx-sdram.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h index 8efa557972e..98faced366c 100644 --- a/include/asm-ppc/ppc4xx-sdram.h +++ b/include/asm-ppc/ppc4xx-sdram.h @@ -272,8 +272,11 @@ #define SDRAM_CONF1HB_PRPD 0x00080000 /* PLB Read pipeline Disable - Bit 12 */ #define SDRAM_CONF1HB_PWPD 0x00040000 /* PLB Write pipeline Disable - Bit 13 */ #define SDRAM_CONF1HB_PRW 0x00020000 /* PLB Read Wait - Bit 14 */ +#define SDRAM_CONF1HB_RPLM 0x00001000 /* Read Passing Limit 1 - Bits 16..19 */ #define SDRAM_CONF1HB_RPEN 0x00000800 /* Read Passing Enable - Bit 20 */ #define SDRAM_CONF1HB_RFTE 0x00000400 /* Read Flow Through Enable - Bit 21 */ +#define SDRAM_CONF1HB_WRCL 0x00000080 /* MCIF Cycle Limit 1 - Bits 22..24 */ +#define SDRAM_CONF1HB_MASK 0x0000F380 /* RPLM & WRCL mask */ #define SDRAM_ERRSTATHB (SDRAMQ_DCR_BASE+0x7) /* error status HB */ #define SDRAM_ERRADDUHB (SDRAMQ_DCR_BASE+0x8) /* error address upper 32 HB */ @@ -284,8 +287,10 @@ #define SDRAM_CONF1LL_PRPD 0x00080000 /* PLB Read pipeline Disable - Bit 12 */ #define SDRAM_CONF1LL_PWPD 0x00040000 /* PLB Write pipeline Disable - Bit 13 */ #define SDRAM_CONF1LL_PRW 0x00020000 /* PLB Read Wait - Bit 14 */ +#define SDRAM_CONF1LL_RPLM 0x00001000 /* Read Passing Limit 1 - Bits 16..19 */ #define SDRAM_CONF1LL_RPEN 0x00000800 /* Read Passing Enable - Bit 20 */ #define SDRAM_CONF1LL_RFTE 0x00000400 /* Read Flow Through Enable - Bit 21 */ +#define SDRAM_CONF1LL_MASK 0x0000F000 /* RPLM mask */ #define SDRAM_ERRSTATLL (SDRAMQ_DCR_BASE+0xC) /* error status LL */ #define SDRAM_ERRADDULL (SDRAMQ_DCR_BASE+0xD) /* error address upper 32 LL */ -- cgit v1.2.3