From c18960049f8ea9b0a8ad0a05c93e23fbab025da0 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 28 Dec 2003 11:44:59 +0000 Subject: Patch by Reinhard Meyer, 28 Dec 2003: Add initial support for TOP5200 board --- include/configs/TOP5200.h | 291 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 291 insertions(+) create mode 100644 include/configs/TOP5200.h (limited to 'include/configs') diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h new file mode 100644 index 0000000000..21daa2d971 --- /dev/null +++ b/include/configs/TOP5200.h @@ -0,0 +1,291 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * modified for TOP5200 by Reinhard Meyer, www.emk-elektronik.de + * TOP5200 differences from IceCube: + * 1 FLASH Bank for one Chip only, up to 64 MB in 16 MB Banks + * bank switch controlled by TIMER_6(LSB) and TIMER_7(MSB) Pins + * 1 SDRAM/DDRAM Bank up to 256 MB + * local VPD I2C Bus is software driven and uses + * GPIO_WKUP_6 for SDA, GPIO_WKUP_7 for SCL + * FLASH is located at 0x80000000 + * Internal regs are at 0xfff00000 + * Reset jumps to 0x00000100 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5XXX 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ +#define CONFIG_TOP5200 1 /* ... on TOP5200 board - we need this for FEC.C */ + +#define CFG_MPC5XXX_CLKIN 33333333 /* ... running at 33MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 9600 /* ... at 9600 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + + +#ifdef CONFIG_EVAL5200 /* PCI is supported with Evaluation board only */ +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +# define CONFIG_PCI 1 +# define CONFIG_PCI_PNP 1 +# define CONFIG_PCI_SCAN_SHOW 1 + +# define CONFIG_PCI_MEM_BUS 0x40000000 +# define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +# define CONFIG_PCI_MEM_SIZE 0x10000000 + +# define CONFIG_PCI_IO_BUS 0x50000000 +# define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +# define CONFIG_PCI_IO_SIZE 0x01000000 + +# define ADD_PCI_CMD CFG_CMD_PCI + +#else /* no Evaluation board */ + +# define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ + +#endif + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | ADD_PCI_CMD | \ + CFG_CMD_I2C | CFG_CMD_EEPROM) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ +#define CONFIG_BOOTARGS "root=/dev/ram rw" + +/* + * IPB Bus clocking configuration. + */ +#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ + +/* + * I2C configuration + */ +/* + * EEPROM configuration + */ +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 + +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_SIZE 0x2000 + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_MISC_INIT_R + +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 + +#if defined (CONFIG_SOFT_I2C) +# define SDA0 0x40 +# define SCL0 0x80 +# define GPIOE0 *((volatile uchar*)(CFG_MBAR+0x0c00)) +# define DDR0 *((volatile uchar*)(CFG_MBAR+0x0c08)) +# define DVO0 *((volatile uchar*)(CFG_MBAR+0x0c0c)) +# define DVI0 *((volatile uchar*)(CFG_MBAR+0x0c20)) +# define ODE0 *((volatile uchar*)(CFG_MBAR+0x0c04)) +# define I2C_INIT {GPIOE0|=(SDA0|SCL0);ODE0|=(SDA0|SCL0);DVO0|=(SDA0|SCL0);DDR0|=(SDA0|SCL0);} +# define I2C_READ ((DVI0&SDA0)?1:0) +# define I2C_SDA(x) {if(x)DVO0|=SDA0;else DVO0&=~SDA0;} +# define I2C_SCL(x) {if(x)DVO0|=SCL0;else DVO0&=~SCL0;} +# define I2C_DELAY {udelay(5);} +# define I2C_ACTIVE {DDR0|=SDA0;} +# define I2C_TRISTATE {DDR0&=~SDA0;} +# define CFG_I2C_SPEED 100000 +# define CFG_I2C_SLAVE 0x7F +#endif + +#if defined (CONFIG_HARD_I2C) +# define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ +# define CFG_I2C_SPEED 100000 /* 100 kHz */ +# define CFG_I2C_SLAVE 0x7F +#endif + +/* + * Flash configuration, expect one 16 Megabyte Bank at most + */ +#define CFG_FLASH_BASE 0xff000000 +#define CFG_FLASH_SIZE 0x01000000 +#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0) + +#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ + +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +#undef CONFIG_FLASH_16BIT /* Flash is 8-bit */ + +/* + * DRAM configuration - will be read from VPD later... TODO! + */ +#if 0 +/* 2x MT48LC16M16A2 - 7.0 ns SDRAMS = 64 MegaBytes Total */ +#define CFG_DRAM_DDR 0 +#define CFG_DRAM_EMODE 0 +#define CFG_DRAM_MODE 0x008D +#define CFG_DRAM_CONTROL 0x514F0000 +#define CFG_DRAM_CONFIG1 0xC2233A00 +#define CFG_DRAM_CONFIG2 0x88B70004 +#define CFG_DRAM_TAP_DEL 0x08 +#define CFG_DRAM_RAM_SIZE 0x19 +#endif +#if 1 +/* 2x MT48LC16M16A2 - 7.5 ns SDRAMS = 64 MegaBytes Total */ +#define CFG_DRAM_DDR 0 +#define CFG_DRAM_EMODE 0 +#define CFG_DRAM_MODE 0x00CD +#define CFG_DRAM_CONTROL 0x514F0000 +#define CFG_DRAM_CONFIG1 0xD2333A00 +#define CFG_DRAM_CONFIG2 0x8AD70004 +#define CFG_DRAM_TAP_DEL 0x08 +#define CFG_DRAM_RAM_SIZE 0x19 +#endif + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_EEPROM 1 /* turn on EEPROM env feature */ +#define CFG_ENV_OFFSET 0x1000 +#define CFG_ENV_SIZE 0x0700 +#define CFG_I2C_EEPROM_ADDR 0x57 + +/* + * VPD settings + */ +#define CFG_FACT_OFFSET 0x1800 +#define CFG_FACT_SIZE 0x0800 +#define CFG_I2C_FACT_ADDR 0x57 + +/* + * Memory map + * + * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000 + */ +#define CFG_MBAR 0xf0000000 /* DO NOT CHANGE this */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5XXX_FEC 1 +#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ +#define CONFIG_PHY_ADDR 0x1f +#define CONFIG_PHY_TYPE 0x79c874 +/* + * GPIO configuration: + * PSC1,2,3 predefined as UART + * PCI disabled + * Ethernet 100 with MD + */ +#define CFG_GPS_PORT_CONFIG 0x00058444 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x01f00000 /* 1 ... 31 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00047801 +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333333 + +#define CFG_RESET_ADDRESS 0x7f000000 + +#endif /* __CONFIG_H */ -- cgit v1.2.3