From 2853d29b5232e6cee5f8dd21f769d93dd34ffdcf Mon Sep 17 00:00:00 2001 From: stroese Date: Fri, 12 Sep 2003 08:53:54 +0000 Subject: Update configuration. --- include/configs/CPCI405AB.h | 46 ++++++++++++++++++--------------------------- include/configs/PCI405.h | 2 ++ include/configs/PMC405.h | 14 ++++++++++++++ 3 files changed, 34 insertions(+), 28 deletions(-) (limited to 'include/configs') diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index d55b51eb97..492fe49424 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -57,7 +57,7 @@ #undef CONFIG_BOOTARGS #define CONFIG_BOOTCOMMAND "bootm 100000" /* default boot command */ -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CONFIG_LOADS_ECHO /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ #define CONFIG_MII 1 /* MII PHY management */ @@ -228,44 +228,34 @@ #define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ #define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ -#if 0 /* Use NVRAM for environment variables */ /*----------------------------------------------------------------------- - * NVRAM organization + * I2C EEPROM (CAT24WC32) for environment */ -#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#define CFG_ENV_SIZE 0x0ff8 /* Size of Environment vars */ -#define CFG_ENV_ADDR \ - (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-(CFG_ENV_SIZE+8)) /* Env */ +#define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F -#else /* Use EEPROM for environment variables */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC32 */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +/* mask of address bits that overflow into the "EEPROM chip address" */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */ + /* 32 byte page write mode using*/ + /* last 5 bits of the address */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ +#define CFG_EEPROM_PAGE_WRITE_ENABLE + +/* Use EEPROM for environment variables */ #define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ #define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ -#define CFG_ENV_SIZE 0x400 /* 1024 bytes may be used for env vars*/ - /* total size of a CAT24WC08 is 1024 bytes */ -#endif +#define CFG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars*/ + /* total size of a CAT24WC32 is 4096 bytes */ #define CFG_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */ #define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */ #define CFG_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */ -/*----------------------------------------------------------------------- - * I2C EEPROM (CAT24WC08) for environment - */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F - -#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ -#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 -#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ - /* 16 byte page write mode using*/ - /* last 4 bits of the address */ -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CFG_EEPROM_PAGE_WRITE_ENABLE - /*----------------------------------------------------------------------- * Cache Configuration */ diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 8ab253a35e..9cd8f5a32d 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -133,6 +133,8 @@ #undef CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 54b53bc71f..35d49fcec8 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -63,6 +63,7 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_BSP | \ CFG_CMD_PCI | \ CFG_CMD_IRQ | \ CFG_CMD_ELF | \ @@ -254,6 +255,19 @@ #define CFG_EBC_PB3AP 0x010059C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */ #define CFG_EBC_PB3CR CF_BA | 0x1A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */ +/*----------------------------------------------------------------------- + * FPGA stuff + */ +#define CFG_FPGA_XC95XL 1 /* using Xilinx XC95XL CPLD */ +#define CFG_FPGA_MAX_SIZE 32*1024 /* 32kByte is enough for CPLD */ + +/* FPGA program pin configuration */ +#define CFG_FPGA_PRG 0x04000000 /* JTAG TMS pin (ppc output) */ +#define CFG_FPGA_CLK 0x02000000 /* JTAG TCK pin (ppc output) */ +#define CFG_FPGA_DATA 0x01000000 /* JTAG TDO->TDI data pin (ppc output) */ +#define CFG_FPGA_INIT 0x00010000 /* unused (ppc input) */ +#define CFG_FPGA_DONE 0x00008000 /* JTAG TDI->TDO pin (ppc input) */ + /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in data cache) */ -- cgit v1.2.3