From 27192d16eb3dacfedfb507f60a325b482bbf317f Mon Sep 17 00:00:00 2001
From: "Albert ARIBAUD \\(3ADEV\\)" <albert.aribaud@3adev.fr>
Date: Mon, 26 Sep 2016 09:08:08 +0200
Subject: pcm052: add new BK4r1 target based on PCM052 SoM

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
---
 include/configs/bk4r1.h  | 33 +++++++++++++++++++++++++++++++++
 include/configs/pcm052.h | 45 +++++++++++++++++++++++++++++++++++++++------
 2 files changed, 72 insertions(+), 6 deletions(-)
 create mode 100644 include/configs/bk4r1.h

(limited to 'include/configs')

diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h
new file mode 100644
index 0000000000..5861eeb178
--- /dev/null
+++ b/include/configs/bk4r1.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2016 3ADEV <http://3adev.com>
+ * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
+ *
+ * Configuration settings for the phytec PCM-052 SoM-based BK4R1.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/* Define the BK4r1-specific env commands */
+#define PCM052_EXTRA_ENV_SETTINGS \
+	"set_gpio103=mw 0x400ff0c4 0x0080; mw 0x4004819C 0x000011bf\0" \
+	"set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0"
+
+/* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/
+#define PCM052_BOOTCOMMAND "run set_gpio103; sf probe; "
+
+/* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */
+#define PCM052_NET_INIT "run set_gpio122; "
+
+/* add NOR to MTD env */
+#define MTDIDS_DEFAULT			"nand0=NAND,nor0=NOR"
+#define MTDPARTS_DEFAULT		"mtdparts=NAND:640k(bootloader)"\
+					",128k(env1)"\
+					",128k(env2)"\
+					",128k(dtb)"\
+					",6144k(kernel)"\
+					",-(root);"\
+					"NOR:-(nor)"
+
+/* now include standard PCM052 config */
+
+#include "configs/pcm052.h"
diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index 32f958a6b2..0372e4376b 100644
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -52,7 +52,12 @@
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
+
+#ifndef MTDIDS_DEFAULT
 #define MTDIDS_DEFAULT			"nand0=NAND"
+#endif
+
+#ifndef MTDPARTS_DEFAULT
 #define MTDPARTS_DEFAULT		"mtdparts=NAND:640k(bootloader)"\
 					",128k(env1)"\
 					",128k(env2)"\
@@ -61,6 +66,8 @@
 					",-(root)"
 #endif
 
+#endif
+
 #define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
@@ -85,7 +92,6 @@
 /* QSPI Configs*/
 
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH
 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
 #define FSL_QSPI_FLASH_NUM		2
 #define CONFIG_SYS_FSL_QSPI_LE
@@ -115,8 +121,31 @@
 #define CONFIG_SYS_TEXT_BASE		0x3f408000
 #define CONFIG_BOARD_SIZE_LIMIT		524288
 
-#define CONFIG_BOOTCOMMAND              "run bootcmd_sd"
+/* if no target-specific extra environment settings were defined by the
+   target, define an empty one */
+#ifndef PCM052_EXTRA_ENV_SETTINGS
+#define PCM052_EXTRA_ENV_SETTINGS
+#endif
+
+/* if no target-specific boot command was defined by the target,
+   define an empty one */
+#ifndef PCM052_BOOTCOMMAND
+#define PCM052_BOOTCOMMAND
+#endif
+
+/* if no target-specific extra environment settings were defined by the
+   target, define an empty one */
+#ifndef PCM052_NET_INIT
+#define PCM052_NET_INIT
+#endif
+
+/* boot command, including the target-defined one if any */
+#define CONFIG_BOOTCOMMAND	PCM052_BOOTCOMMAND "run bootcmd_nand"
+
+/* Extra env settings (including the target-defined ones if any) */
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	PCM052_EXTRA_ENV_SETTINGS \
+	"autoload=no\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"blimg_file=u-boot.vyb\0" \
@@ -163,7 +192,8 @@
 		"nand read ${kernel_addr} kernel; " \
 		"nand read ${ram_addr} root; " \
 		"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
-	"update_bootloader_from_tftp=if tftp ${blimg_addr} "\
+	"update_bootloader_from_tftp=" PCM052_NET_INIT \
+		"if tftp ${blimg_addr} "\
 		"${tftpdir}${blimg_file}; then " \
 		"mtdparts default; " \
 		"nand erase.part bootloader; " \
@@ -176,7 +206,8 @@
 		"if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \
 		"nand erase.part dtb; " \
 		"nand write ${fdt_addr} dtb ${filesize}; fi\0" \
-	"update_kernel_from_tftp=if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
+	"update_kernel_from_tftp=" PCM052_NET_INIT \
+		"if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
 		"then setenv fdtsize ${filesize}; " \
 		"if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \
 		"mtdparts default; " \
@@ -184,13 +215,15 @@
 		"nand write ${fdt_addr} dtb ${fdtsize}; " \
 		"nand erase.part kernel; " \
 		"nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \
-	"update_rootfs_from_tftp=if tftp ${sys_addr} ${tftpdir}${filesys}; " \
+	"update_rootfs_from_tftp=" PCM052_NET_INIT \
+		"if tftp ${sys_addr} ${tftpdir}${filesys}; " \
 		"then mtdparts default; " \
 		"nand erase.part root; " \
 		"ubi part root; " \
 		"ubi create rootfs; " \
 		"ubi write ${sys_addr} rootfs ${filesize}; fi\0" \
-	"update_ramdisk_from_tftp=if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
+	"update_ramdisk_from_tftp=" PCM052_NET_INIT \
+		"if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
 		"then mtdparts default; " \
 		"nand erase.part root; " \
 		"nand write ${ram_addr} root ${filesize}; fi\0"
-- 
cgit v1.2.3