From ea818dbbcd59300b56014ac2d67798a54994eb9b Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 29 Jan 2013 08:53:15 +0100 Subject: i2c, soft-i2c: switch to new multibus/multiadapter support - added to soft_i2c driver new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Heiko Schocher Cc: Simon Glass Cc: Stephen Warren --- include/configs/ep8260.h | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'include/configs/ep8260.h') diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 5a87cc5d3d..2e675bce61 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -227,15 +227,18 @@ * If the software driver is chosen, there are some additional * configuration items that the driver uses to drive the port pins. */ -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ + #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SLAVE 0x7F /* This is for HARD, must go */ /* * Software (bit-bang) I2C driver configuration */ -#ifdef CONFIG_SOFT_I2C +#ifdef CONFIG_SYS_I2C_SOFT +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SOFT_SPEED 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE #define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ #define I2C_ACTIVE (iop->pdir |= 0x00010000) #define I2C_TRISTATE (iop->pdir &= ~0x00010000) @@ -245,7 +248,7 @@ #define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ else iop->pdat &= ~0x00020000 #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#endif /* CONFIG_SOFT_I2C */ +#endif /* CONFIG_SYS_I2C_SOFT */ /* #define CONFIG_RTC_DS174x */ -- cgit v1.2.3