From dd36d806fe549f40e059dd9d5072f8e017ed30dd Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 3 Nov 2011 01:02:47 +0100 Subject: PXA: Drop csb226 and innokom boards (unmaintained) Signed-off-by: Marek Vasut Cc: Robert Schwebel Cc: Albert ARIBAUD --- include/configs/csb226.h | 506 ----------------------------------------------- 1 file changed, 506 deletions(-) delete mode 100644 include/configs/csb226.h (limited to 'include/configs/csb226.h') diff --git a/include/configs/csb226.h b/include/configs/csb226.h deleted file mode 100644 index 804469bf85..0000000000 --- a/include/configs/csb226.h +++ /dev/null @@ -1,506 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de. - * - * Configuration for the Cogent CSB226 board. For details see - * http://www.cogcomp.com/csb_csb226.htm - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * include/configs/csb226.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define DEBUG 1 - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_CSB226 1 /* on a CSB226 board */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* for timer/console/ethernet */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_SYS_TEXT_BASE 0x0 -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 19200 -#undef CONFIG_MISC_INIT_R /* not used yet */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_IMI -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_RUN -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_CACHE - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0" -#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.1.56 -#define CONFIG_SERVERIP 192.168.1.5 -#define CONFIG_BOOTCOMMAND "bootm 0x40000" -#define CONFIG_SHOW_BOOT_PROGRESS - -#define CONFIG_CMDLINE_TAG 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ - -/* - * Size of malloc() pool; this lives below the uppermost 128 KiB which are - * used for the RAM copy of the uboot code - * - */ -#define CONFIG_SYS_MALLOC_LEN (128*1024) - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 128 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ - /* RS: where is this documented? */ - /* RS: is this where U-Boot is */ - /* RS: relocated to in RAM? */ - -#define CONFIG_SYS_HZ 1000 - /* RS: the oscillator is actually 3680130?? */ -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ - /* 0101000001 */ - /* ^^^^^ Memory Speed 99.53 MHz */ - /* ^^ Run Mode Speed = 2x Mem Speed */ - /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */ - -#define CONFIG_SYS_MONITOR_LEN 0x1c000 /* 112 KiB */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * Network chip - */ -#define CONFIG_CS8900 -#define CONFIG_CS8900_BUS32 -#define CONFIG_CS8900_BASE 0x08000000 - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* RAM starts here */ -#define CONFIG_SYS_DRAM_SIZE 0x02000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -# if 0 -/* FIXME: switch to _documented_ registers */ -/* - * GPIO settings - * - * GP15 == nCS1 is 1 - * GP24 == SFRM is 1 - * GP25 == TXD is 1 - * GP33 == nCS5 is 1 - * GP39 == FFTXD is 1 - * GP41 == RTS is 1 - * GP47 == TXD is 1 - * GP49 == nPWE is 1 - * GP62 == LED_B is 1 - * GP63 == TDM_OE is 1 - * GP78 == nCS2 is 1 - * GP79 == nCS3 is 1 - * GP80 == nCS4 is 1 - */ -#define CONFIG_SYS_GPSR0_VAL 0x03008000 -#define CONFIG_SYS_GPSR1_VAL 0xC0028282 -#define CONFIG_SYS_GPSR2_VAL 0x0001C000 - -/* GP02 == DON_RST is 0 - * GP23 == SCLK is 0 - * GP45 == USB_ACT is 0 - * GP60 == PLLEN is 0 - * GP61 == LED_A is 0 - * GP73 == SWUPD_LED is 0 - */ -#define CONFIG_SYS_GPCR0_VAL 0x00800004 -#define CONFIG_SYS_GPCR1_VAL 0x30002000 -#define CONFIG_SYS_GPCR2_VAL 0x00000100 - -/* GP00 == DON_READY is input - * GP01 == DON_OK is input - * GP02 == DON_RST is output - * GP03 == RESET_IND is input - * GP07 == RES11 is input - * GP09 == RES12 is input - * GP11 == SWUPDATE is input - * GP14 == nPOWEROK is input - * GP15 == nCS1 is output - * GP17 == RES22 is input - * GP18 == RDY is input - * GP23 == SCLK is output - * GP24 == SFRM is output - * GP25 == TXD is output - * GP26 == RXD is input - * GP32 == RES21 is input - * GP33 == nCS5 is output - * GP34 == FFRXD is input - * GP35 == CTS is input - * GP39 == FFTXD is output - * GP41 == RTS is output - * GP42 == USB_OK is input - * GP45 == USB_ACT is output - * GP46 == RXD is input - * GP47 == TXD is output - * GP49 == nPWE is output - * GP58 == nCPUBUSINT is input - * GP59 == LANINT is input - * GP60 == PLLEN is output - * GP61 == LED_A is output - * GP62 == LED_B is output - * GP63 == TDM_OE is output - * GP64 == nDSPINT is input - * GP65 == STRAP0 is input - * GP67 == STRAP1 is input - * GP69 == STRAP2 is input - * GP70 == STRAP3 is input - * GP71 == STRAP4 is input - * GP73 == SWUPD_LED is output - * GP78 == nCS2 is output - * GP79 == nCS3 is output - * GP80 == nCS4 is output - */ -#define CONFIG_SYS_GPDR0_VAL 0x03808004 -#define CONFIG_SYS_GPDR1_VAL 0xF002A282 -#define CONFIG_SYS_GPDR2_VAL 0x0001C200 - -/* GP15 == nCS1 is AF10 - * GP18 == RDY is AF01 - * GP23 == SCLK is AF10 - * GP24 == SFRM is AF10 - * GP25 == TXD is AF10 - * GP26 == RXD is AF01 - * GP33 == nCS5 is AF10 - * GP34 == FFRXD is AF01 - * GP35 == CTS is AF01 - * GP39 == FFTXD is AF10 - * GP41 == RTS is AF10 - * GP46 == RXD is AF10 - * GP47 == TXD is AF01 - * GP49 == nPWE is AF10 - * GP78 == nCS2 is AF10 - * GP79 == nCS3 is AF10 - * GP80 == nCS4 is AF10 - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0x001A8010 -#define CONFIG_SYS_GAFR1_L_VAL 0x60088058 -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 -#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - - -/* FIXME: set GPIO_RER/FER */ - -/* RDH = 1 - * PH = 1 - * VFS = 1 - * BFS = 1 - * SSS = 1 - */ -#define CONFIG_SYS_PSSR_VAL 0x37 - -/* - * Memory settings - * - * This is the configuration for nCS0/1 -> flash banks - * configuration for nCS1: - * [31] 0 - Slower Device - * [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns - * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns - * [19] 1 - 16 Bit bus width - * [18:16] 000 - nonburst RAM or FLASH - * configuration for nCS0: - * [15] 0 - Slower Device - * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns - * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns - * [03] 1 - 16 Bit bus width - * [02:00] 000 - nonburst RAM or FLASH - */ -#define CONFIG_SYS_MSC0_VAL 0x25b825b8 /* flash banks */ - -/* This is the configuration for nCS2/3 -> TDM-Switch, DSP - * configuration for nCS3: DSP - * [31] 0 - Slower Device - * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns - * [19] 1 - 16 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS2: TDM-Switch - * [15] 0 - Slower Device - * [14:12] 101 - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns - * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns - * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC1_VAL 0x123C593C /* TDM switch, DSP */ - -/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller - * - * configuration for nCS5: LAN Controller - * [31] 0 - Slower Device - * [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns - * [19] 1 - 16 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS4: ExtBus - * [15] 0 - Slower Device - * [14:12] 110 - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns - * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns - * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */ - -/* MDCNFG: SDRAM Configuration Register - * - * [31:29] 000 - reserved - * [28] 0 - no SA1111 compatiblity mode - * [27] 0 - latch return data with return clock - * [26] 0 - alternate addressing for pair 2/3 - * [25:24] 00 - timings - * [23] 0 - internal banks in lower partition 2/3 (not used) - * [22:21] 00 - row address bits for partition 2/3 (not used) - * [20:19] 00 - column address bits for partition 2/3 (not used) - * [18] 0 - SDRAM partition 2/3 width is 32 bit - * [17] 0 - SDRAM partition 3 disabled - * [16] 0 - SDRAM partition 2 disabled - * [15:13] 000 - reserved - * [12] 1 - SA1111 compatiblity mode - * [11] 1 - latch return data with return clock - * [10] 0 - no alternate addressing for pair 0/1 - * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk - * [7] 1 - 4 internal banks in lower partition pair - * [06:05] 10 - 13 row address bits for partition 0/1 - * [04:03] 01 - 9 column address bits for partition 0/1 - * [02] 0 - SDRAM partition 0/1 width is 32 bit - * [01] 0 - disable SDRAM partition 1 - * [00] 1 - enable SDRAM partition 0 - */ -/* use the configuration above but disable partition 0 */ -#define CONFIG_SYS_MDCNFG_VAL 0x000019c8 - -/* MDREFR: SDRAM Refresh Control Register - * - * [32:26] 0 - reserved - * [25] 0 - K2FREE: not free running - * [24] 0 - K1FREE: not free running - * [23] 1 - K0FREE: not free running - * [22] 0 - SLFRSH: self refresh disabled - * [21] 0 - reserved - * [20] 0 - APD: no auto power down - * [19] 0 - K2DB2: SDCLK2 is MemClk - * [18] 0 - K2RUN: disable SDCLK2 - * [17] 0 - K1DB2: SDCLK1 is MemClk - * [16] 1 - K1RUN: enable SDCLK1 - * [15] 1 - E1PIN: SDRAM clock enable - * [14] 1 - K0DB2: SDCLK0 is MemClk - * [13] 0 - K0RUN: disable SDCLK0 - * [12] 1 - E0PIN: disable SDCKE0 - * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 - */ -#define CONFIG_SYS_MDREFR_VAL 0x0081D018 - -/* MDMRS: Mode Register Set Configuration Register - * - * [31] 0 - reserved - * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) - * [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used) - * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) - * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) - * [15] 0 - reserved - * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. - * [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency. - * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. - * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. - */ -#define CONFIG_SYS_MDMRS_VAL 0x00020022 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00000000 -#define CONFIG_SYS_MCMEM1_VAL 0x00000000 -#define CONFIG_SYS_MCATT0_VAL 0x00000000 -#define CONFIG_SYS_MCATT1_VAL 0x00000000 -#define CONFIG_SYS_MCIO0_VAL 0x00000000 -#define CONFIG_SYS_MCIO1_VAL 0x00000000 -#endif - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0xFFFFFFFF -#define CONFIG_SYS_GPSR1_VAL 0xFFFFFFFF -#define CONFIG_SYS_GPSR2_VAL 0xFFFFFFFF -#define CONFIG_SYS_GPCR0_VAL 0x08022080 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0xCD82A878 -#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB80 -#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0xA5254010 -#define CONFIG_SYS_GAFR1_L_VAL 0x599A9550 -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA -#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - -/* FIXME: set GPIO_RER/FER */ - -#define CONFIG_SYS_PSSR_VAL 0x20 - -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 -#define CONFIG_SYS_CKEN 0x0 - -/* - * Memory settings - */ - -#define CONFIG_SYS_MSC0_VAL 0x2ef15af0 -#define CONFIG_SYS_MSC1_VAL 0x00003ff4 -#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0 -#define CONFIG_SYS_MDCNFG_VAL 0x09a909a9 -#define CONFIG_SYS_MDREFR_VAL 0x038ff030 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00000000 -#define CONFIG_SYS_MCMEM1_VAL 0x00000000 -#define CONFIG_SYS_MCATT0_VAL 0x00000000 -#define CONFIG_SYS_MCATT1_VAL 0x00000000 -#define CONFIG_SYS_MCIO0_VAL 0x00000000 -#define CONFIG_SYS_MCIO1_VAL 0x00000000 - -#define CSB226_USER_LED0 0x00000008 -#define CSB226_USER_LED1 0x00000010 -#define CSB226_USER_LED2 0x00000020 - - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sect. on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) - /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -#endif /* __CONFIG_H */ -- cgit v1.2.3