From c3c7f861aef5abb5173f16af66c3941149954553 Mon Sep 17 00:00:00 2001 From: wdenk Date: Wed, 9 Jun 2004 14:47:54 +0000 Subject: Patch by Yuli Barcohen, 20 May 2004: Add support for Interphase iSPAN boards. --- include/configs/ISPAN.h | 344 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 344 insertions(+) create mode 100644 include/configs/ISPAN.h (limited to 'include/configs/ISPAN.h') diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h new file mode 100644 index 0000000000..9ec1c0834b --- /dev/null +++ b/include/configs/ISPAN.h @@ -0,0 +1,344 @@ +/* + * Copyright (C) 2004 Arabella Software Ltd. + * Yuli Barcohen + * + * Support for Interphase iSPAN Communications Controllers + * (453x and others). Tested on 4532. + * + * Derived from iSPAN 4539 port (iphase4539) by + * Wolfgang Grandegger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MPC8260 /* This is an MPC8260 CPU */ +#define CONFIG_ISPAN /* ...on one of Interphase iSPAN boards */ + +/*----------------------------------------------------------------------- + * Select serial console configuration + * + * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then + * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 + * for SCC). + * + * If CONFIG_CONS_NONE is defined, then the serial console routines must be + * defined elsewhere (for example, on the cogent platform, there are serial + * ports on the motherboard which are used for the serial console - see + * cogent/cma101/serial.[ch]). + */ +#define CONFIG_CONS_ON_SMC /* Define if console on SMC */ +#undef CONFIG_CONS_ON_SCC /* Define if console on SCC */ +#undef CONFIG_CONS_NONE /* Define if console on something else */ +#define CONFIG_CONS_INDEX 1 /* Which serial channel for console */ + +/*----------------------------------------------------------------------- + * Select Ethernet configuration + * + * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then + * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 + * for FCC). + * + * If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must + * be defined elsewhere (as for the console), or CFG_CMD_NET must be removed + * from CONFIG_COMMANDS to remove support for networking. + */ +#undef CONFIG_ETHER_ON_SCC /* Define if Ethernet on SCC */ +#define CONFIG_ETHER_ON_FCC /* Define if Ethernet on FCC */ +#undef CONFIG_ETHER_NONE /* Define if Ethernet on something else */ +#define CONFIG_ETHER_INDEX 3 /* Which channel for Ethernrt */ + +#ifdef CONFIG_ETHER_ON_FCC + +#if CONFIG_ETHER_INDEX == 3 + +#define CFG_PHY_ADDR 0 +#define CFG_CMXFCR_VALUE (CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16) +#define CFG_CMXFCR_MASK (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK) + +#endif /* CONFIG_ETHER_INDEX == 3 */ + +#define CFG_CPMFCR_RAMTYPE 0 +#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_BITBANGMII /* Bit-bang MII PHY management */ +/* + * GPIO pins used for bit-banged MII communications + */ +#define MDIO_PORT 3 /* Port D */ + +#define CFG_MDIO_PIN 0x00040000 /* PD13 */ +#define CFG_MDC_PIN 0x00080000 /* PD12 */ + +#define MDIO_ACTIVE (iop->pdir |= CFG_MDIO_PIN) +#define MDIO_TRISTATE (iop->pdir &= ~CFG_MDIO_PIN) +#define MDIO_READ ((iop->pdat & CFG_MDIO_PIN) != 0) + +#define MDIO(bit) if(bit) iop->pdat |= CFG_MDIO_PIN; \ + else iop->pdat &= ~CFG_MDIO_PIN + +#define MDC(bit) if(bit) iop->pdat |= CFG_MDC_PIN; \ + else iop->pdat &= ~CFG_MDC_PIN + +#define MIIDELAY udelay(1) + +#endif /* CONFIG_ETHER_ON_FCC */ + +#define CONFIG_8260_CLKIN 65536000 /* in Hz */ +#define CONFIG_BAUDRATE 38400 + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL \ + | CFG_CMD_ASKENV \ + | CFG_CMD_DHCP \ + | CFG_CMD_ECHO \ + | CFG_CMD_IMMAP \ + | CFG_CMD_MII \ + | CFG_CMD_PING \ + | CFG_CMD_REGINFO \ + ) + +/* This must be included AFTER the definition of CONFIG_COMMANDS */ +#include + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTCOMMAND "bootm fe010000" /* autoboot command */ +#define CONFIG_BOOTARGS "root=/dev/ram rw" + +#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ +#undef CONFIG_WATCHDOG /* Disable platform specific watchdog */ + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_LONGHELP /* #undef to save memory */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* Max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x03B00000 /* 1 ... 59 MB in SDRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* Default load address */ + +#define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_RESET_ADDRESS 0x09900000 + +#define CONFIG_MISC_INIT_R /* We need misc_init_r() */ + +/*----------------------------------------------------------------------- + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#ifdef CONFIG_BZIP2 +#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ +#else +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ +#endif /* CONFIG_BZIP2 */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_BASE 0xFE000000 +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_MAX_FLASH_BANKS 1 /* Max num of memory banks */ +#define CFG_MAX_FLASH_SECT 142 /* Max num of sects on one chip */ + +/* Environment is in flash, there is little space left in Serial EEPROM */ +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) + +/*----------------------------------------------------------------------- + * Hard Reset Configuration Words + * + * If you change bits in the HRCW, you must also change the CFG_* + * defines for the various registers affected by the HRCW e.g. changing + * HRCW_DPPCxx requires you to also change CFG_SIUMCR. + */ +/* 0x1686B245 */ +#define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01 | HRCW_CIP |\ + HRCW_L2CPC10 | HRCW_ISB110 |\ + HRCW_BMS | HRCW_MMR11 | HRCW_APPC10 |\ + HRCW_CS10PC01 | HRCW_MODCK_H0101 \ + ) +/* No slaves */ +#define CFG_HRCW_SLAVE1 0 +#define CFG_HRCW_SLAVE2 0 +#define CFG_HRCW_SLAVE3 0 +#define CFG_HRCW_SLAVE4 0 +#define CFG_HRCW_SLAVE5 0 +#define CFG_HRCW_SLAVE6 0 +#define CFG_HRCW_SLAVE7 0 + +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xF0F00000 +#ifdef CFG_REV_B +#define CFG_DEFAULT_IMMR 0xFF000000 +#endif /* CFG_REV_B */ +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from flash */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ + +/*----------------------------------------------------------------------- + * HIDx - Hardware Implementation-dependent Registers 2-11 + *----------------------------------------------------------------------- + * HID0 also contains cache control. + * + * HID1 has only read-only information - nothing to set. + */ +#define CFG_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ + HID0_IFEM|HID0_ABE) +#define CFG_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE) +#define CFG_HID2 0 + +/*----------------------------------------------------------------------- + * RMR - Reset Mode Register 5-5 + *----------------------------------------------------------------------- + * turn on Checkstop Reset Enable + */ +#define CFG_RMR RMR_CSRE + +/*----------------------------------------------------------------------- + * BCR - Bus Configuration 4-25 + *----------------------------------------------------------------------- + */ +#define CFG_BCR 0xA01C0000 + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 4-31 + *----------------------------------------------------------------------- + */ +#define CFG_SIUMCR 0x42250000/* 0x4205C000 */ + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 4-35 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable + */ +#if defined (CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ + SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) +#else +#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ + SYPCR_SWRI|SYPCR_SWP) +#endif /* CONFIG_WATCHDOG */ + +/*----------------------------------------------------------------------- + * TMCNTSC - Time Counter Status and Control 4-40 + * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, + * and enable Time Counter + *----------------------------------------------------------------------- + */ +#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 4-42 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable + * Periodic timer + */ +#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) + +/*----------------------------------------------------------------------- + * SCCR - System Clock Control 9-8 + *----------------------------------------------------------------------- + * Ensure DFBRG is Divide by 16 + */ +#define CFG_SCCR SCCR_DFBRG01 + +/*----------------------------------------------------------------------- + * RCCR - RISC Controller Configuration 13-7 + *----------------------------------------------------------------------- + */ +#define CFG_RCCR 0 + +/*----------------------------------------------------------------------- + * Init Memory Controller: + * + * Bank Bus Machine PortSize Device + * ---- --- ------- ----------------------------- ------ + * 0 60x GPCM 8 bit (Rev.B)/16 bit (Rev.D) Flash + * 1 60x SDRAM 64 bit SDRAM + * 2 Local SDRAM 32 bit SDRAM + */ +#define CFG_USE_FIRMWARE /* If defined - do not initialise memory + controller, rely on initialisation + performed by the Interphase boot firmware. + */ + +#define CFG_OR0_PRELIM 0xFE000882 +#ifdef CFG_REV_B +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BRx_PS_8 | BRx_V) +#else /* Rev. D */ +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BRx_PS_16 | BRx_V) +#endif /* CFG_REV_B */ + +#define CFG_MPTPR 0x7F00 + +/* Please note that 60x SDRAM MUST start at 0 */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_60x_BR 0x00000041 +#define CFG_60x_OR 0xF0002CD0 +#define CFG_PSDMR 0x0049929A +#define CFG_PSRT 0x07 + +#define CFG_LSDRAM_BASE 0xF7000000 +#define CFG_LOC_BR 0x00001861 +#define CFG_LOC_OR 0xFF803280 +#define CFG_LSDMR 0x8285A552 +#define CFG_LSRT 0x07 + +#endif /* __CONFIG_H */ -- cgit v1.2.3