From b4c2c151b14b59a2403675526adf666710cade67 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Aug 2021 08:48:10 +0200 Subject: Kconfig: Remove all default n/no options default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini --- drivers/block/Kconfig | 2 -- drivers/core/Kconfig | 4 ---- drivers/dfu/Kconfig | 1 - drivers/dma/ti/Kconfig | 1 - drivers/fastboot/Kconfig | 1 - drivers/gpio/Kconfig | 10 ---------- drivers/i2c/Kconfig | 2 -- drivers/mmc/Kconfig | 5 ----- drivers/mtd/nand/raw/Kconfig | 3 --- drivers/mtd/spi/Kconfig | 2 -- drivers/mtd/ubi/Kconfig | 1 - drivers/net/Kconfig | 3 --- drivers/net/phy/Kconfig | 3 --- drivers/pci/Kconfig | 8 -------- drivers/phy/marvell/Kconfig | 1 - drivers/power/Kconfig | 2 -- drivers/ram/aspeed/Kconfig | 3 --- drivers/ram/octeon/Kconfig | 2 -- drivers/ram/stm32mp1/Kconfig | 1 - drivers/reboot-mode/Kconfig | 3 --- drivers/rng/Kconfig | 3 --- drivers/serial/Kconfig | 2 -- drivers/usb/host/Kconfig | 4 ---- drivers/usb/musb-new/Kconfig | 2 -- drivers/video/Kconfig | 13 ------------- drivers/w1/Kconfig | 3 --- 26 files changed, 85 deletions(-) (limited to 'drivers') diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 4023332dd9..56a4eec05a 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -52,14 +52,12 @@ config BLOCK_CACHE config SPL_BLOCK_CACHE bool "Use block device cache in SPL" depends on SPL_BLK - default n help This option enables the disk-block cache in SPL config TPL_BLOCK_CACHE bool "Use block device cache in TPL" depends on TPL_BLK - default n help This option enables the disk-block cache in TPL diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index 9ae188c1df..8f7703c8b5 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -80,7 +80,6 @@ config DM_DEVICE_REMOVE config SPL_DM_DEVICE_REMOVE bool "Support device removal in SPL" depends on SPL_DM - default n help We can save some code space by dropping support for removing a device. This is not normally required in SPL, so by default this @@ -107,7 +106,6 @@ config DM_SEQ_ALIAS config SPL_DM_SEQ_ALIAS bool "Support numbered aliases in device tree in SPL" depends on SPL_DM - default n help Most boards will have a '/aliases' node containing the path to numbered devices (e.g. serial0 = &serial0). This feature can be @@ -132,7 +130,6 @@ config TPL_DM_INLINE_OFNODE config DM_DMA bool "Support per-device DMA constraints" depends on DM - default n help Enable this to extract per-device DMA constraints, only supported on device-tree systems for now. This is needed in order translate @@ -274,7 +271,6 @@ config OF_TRANSLATE config SPL_OF_TRANSLATE bool "Translate addresses using fdt_translate_address in SPL" depends on SPL_DM && SPL_OF_CONTROL - default n help If this option is enabled, the reg property will be translated using the fdt_translate_address() function. This is necessary diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig index b50547476c..48e41bc262 100644 --- a/drivers/dfu/Kconfig +++ b/drivers/dfu/Kconfig @@ -16,7 +16,6 @@ config DFU_OVER_TFTP if DFU config DFU_WRITE_ALT bool - default n config DFU_TFTP bool "DFU via TFTP" diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig index 9cbd5f334d..87c026e049 100644 --- a/drivers/dma/ti/Kconfig +++ b/drivers/dma/ti/Kconfig @@ -9,7 +9,6 @@ config TI_K3_NAVSS_UDMA select TI_K3_NAVSS_RINGACC select TI_K3_NAVSS_PSILCFG select TI_K3_PSIL - default n help Support for UDMA used in K3 devices. endif diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig index 2d1836a80e..d5e4a02098 100644 --- a/drivers/fastboot/Kconfig +++ b/drivers/fastboot/Kconfig @@ -74,7 +74,6 @@ config FASTBOOT_FLASH config FASTBOOT_UUU_SUPPORT bool "Enable FASTBOOT i.MX UUU special command" - default n help The fastboot protocol includes "UCmd" and "ACmd" command. Be aware that you provide full access to any U-Boot command, diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 4a89c1a62b..ab9adbdd6e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -39,7 +39,6 @@ config TPL_DM_GPIO config GPIO_HOG bool "Enable GPIO hog support" depends on DM_GPIO - default n help Enable gpio hog support The GPIO chip may contain GPIO hog definitions. GPIO hogging @@ -91,13 +90,11 @@ config CORTINA_GPIO config DWAPB_GPIO bool "DWAPB GPIO driver" depends on DM && DM_GPIO - default n help Support for the Designware APB GPIO driver. config AT91_GPIO bool "AT91 PIO GPIO driver" - default n help Say yes here to select AT91 PIO GPIO driver. AT91 PIO controller manages up to 32 fully programmable input/output @@ -110,7 +107,6 @@ config AT91_GPIO config ATMEL_PIO4 bool "ATMEL PIO4 driver" depends on DM_GPIO - default n help Say yes here to support the Atmel PIO4 driver. The PIO4 is new version of Atmel PIO controller, which manages @@ -150,13 +146,11 @@ config INTEL_ICH6_GPIO config IMX_RGPIO2P bool "i.MX7ULP RGPIO2P driver" depends on DM - default n help This driver supports i.MX7ULP Rapid GPIO2P controller. config IPROC_GPIO bool "Broadcom iProc GPIO driver(without pinconf)" - default n help The Broadcom iProc based SoCs- Cygnus, NS2, NS3, NSP and Stingray, use the same GPIO Controller IP hence this driver could be used @@ -168,14 +162,12 @@ config IPROC_GPIO config HSDK_CREG_GPIO bool "HSDK CREG GPIO griver" depends on DM_GPIO - default n help This driver supports CREG GPIOs on Synopsys HSDK SOC. config LPC32XX_GPIO bool "LPC32XX GPIO driver" depends on DM - default n help Support for the LPC32XX GPIO driver. @@ -203,7 +195,6 @@ config MSCC_SGPIO config MSM_GPIO bool "Qualcomm GPIO driver" depends on DM_GPIO - default n help Support GPIO controllers on Qualcomm Snapdragon family of SoCs. This controller have single bank (default name "soc"), every @@ -345,7 +336,6 @@ config GPIO_UNIPHIER config VYBRID_GPIO bool "Vybrid GPIO driver" depends on DM - default n help Say yes here to support Vybrid vf610 GPIOs. diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 5d27f503bf..57cac4483f 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -193,7 +193,6 @@ config SYS_I2C_CADENCE config SYS_I2C_CA tristate "Cortina-Access I2C Controller" depends on DM_I2C && CORTINA_PLATFORM - default n help Add support for the Cortina Access I2C host controller. Say yes here to select Cortina-Access I2C Host Controller. @@ -206,7 +205,6 @@ config SYS_I2C_DAVINCI config SYS_I2C_DW bool "Designware I2C Controller" - default n help Say yes here to select the Designware I2C Host Controller. This controller is used in various SoCs, e.g. the ST SPEAr, Altera diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 1569e8c44a..e0927ce1c9 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -123,7 +123,6 @@ config MMC_IO_VOLTAGE config SPL_MMC_IO_VOLTAGE bool "Support IO voltage configuration in SPL" - default n help IO voltage configuration allows selecting the voltage level of the IO lines (not the level of main supply). This is required for UHS @@ -193,7 +192,6 @@ config MMC_VERBOSE config MMC_TRACE bool "MMC debugging" - default n help This is an option for use by developer. Enable MMC core debugging. @@ -221,7 +219,6 @@ config MMC_DW_CORTINA depends on DM_MMC depends on MMC_DW depends on BLK - default n help This selects support for Cortina SoC specific extensions to the Synopsys DesignWare Memory Card Interface driver. Select this option @@ -770,7 +767,6 @@ config FTSDC010 config FTSDC010_SDIO bool "Support ftsdc010 sdio" - default n depends on FTSDC010 help This can enable ftsdc010 sdio function. @@ -805,7 +801,6 @@ config FSL_ESDHC_SUPPORT_ADMA2 config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND bool "enable eSDHC workaround for 3.3v IO reliability issue" depends on FSL_ESDHC && DM_MMC - default n help When eSDHC operates at 3.3v, damage can accumulate in an internal level shifter at a higher than expected rate. The faster the interface diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index a901ce5511..f7b1334ddb 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -31,12 +31,10 @@ if NAND_ATMEL config ATMEL_NAND_HWECC bool "Atmel Hardware ECC" - default n config ATMEL_NAND_HW_PMECC bool "Atmel Programmable Multibit ECC (PMECC)" select ATMEL_NAND_HWECC - default n help The Programmable Multibit ECC (PMECC) controller is a programmable binary BCH(Bose, Chaudhuri and Hocquenghem) encoder and decoder. @@ -59,7 +57,6 @@ config SPL_GENERATE_ATMEL_PMECC_HEADER bool "Atmel PMECC Header Generation" select ATMEL_NAND_HWECC select ATMEL_NAND_HW_PMECC - default n help Generate Programmable Multibit ECC (PMECC) header for SPL image. diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index b2291f7290..ddeef37ffc 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -99,7 +99,6 @@ config SPI_FLASH_SMART_HWCAPS config SPI_FLASH_SOFT_RESET bool "Software Reset support for SPI NOR flashes" - default n help Enable support for xSPI Software Reset. It will be used to switch from Octal DTR mode to legacy mode on shutdown and boot (if enabled). @@ -107,7 +106,6 @@ config SPI_FLASH_SOFT_RESET config SPI_FLASH_SOFT_RESET_ON_BOOT bool "Perform a Software Reset on boot on flashes that boot in stateful mode" depends on SPI_FLASH_SOFT_RESET - default n help Perform a Software Reset on boot to allow detecting flashes that are handed to us in Octal DTR mode. Do not enable this config on flashes diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index a78fd51ba7..67a3cf1d7a 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -68,7 +68,6 @@ config MTD_UBI_BEB_LIMIT config MTD_UBI_FASTMAP bool "UBI Fastmap (Experimental feature)" - default n help Important: this feature is experimental so far and the on-flash format for fastmap may change in the next kernel versions diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 32f2708dc3..0b906db5c1 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -558,7 +558,6 @@ endif #DM_ETH config SMC911X_32_BIT bool "Enable SMC911X 32-bit interface" - default n help Define this if data bus is 32 bits. If your processor use a narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit @@ -713,7 +712,6 @@ config FEC1_PHY config PHY_NORXERR bool "PHY_NORXERR" depends on ETHER_ON_FEC1 - default n help The PHY does not have a RXERR line (RMII only). (so program the FEC to ignore it). @@ -738,7 +736,6 @@ config FEC2_PHY config FEC2_PHY_NORXERR bool "PHY_NORXERR" depends on ETHER_ON_FEC2 - default n help The PHY does not have a RXERR line (RMII only). (so program the FEC to ignore it). diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 64d5ddf238..68ee7d7a2d 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -71,7 +71,6 @@ menuconfig PHY_AQUANTIA config PHY_AQUANTIA_UPLOAD_FW bool "Aquantia firmware loading support" - default n depends on PHY_AQUANTIA help Aquantia PHYs use firmware which can be either loaded automatically @@ -102,7 +101,6 @@ config PHY_CORTINA config SYS_CORTINA_NO_FW_UPLOAD bool "Cortina firmware loading support" - default n depends on PHY_CORTINA help Cortina phy has provision to store phy firmware in attached dedicated @@ -250,7 +248,6 @@ config RTL8211X_PHY_FORCE_MASTER config RTL8211F_PHY_FORCE_EEE_RXC_ON bool "Ethernet PHY RTL8211F: do not stop receiving the xMII clock during LPI" depends on PHY_REALTEK - default n help The IEEE 802.3az-2010 (EEE) standard provides a protocol to coordinate transitions to/from a lower power consumption level (Low Power Idle diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 2ef4d46797..97d0de5b11 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -29,7 +29,6 @@ config DM_PCI_COMPAT config PCI_AARDVARK bool "Enable Aardvark PCIe driver" - default n depends on DM_PCI depends on DM_GPIO depends on ARMADA_3700 @@ -48,7 +47,6 @@ config PCI_PNP config PCI_REGION_MULTI_ENTRY bool "Enable Multiple entries of region type MEMORY in ranges for PCI" depends on PCI || DM_PCI - default n help Enable PCI memory regions to be of multiple entry. Multiple entry here refers to allow more than one count of address ranges for MEMORY @@ -59,7 +57,6 @@ config PCI_MAP_SYSTEM_MEMORY bool "Map local system memory from a virtual base address" depends on PCI || DM_PCI depends on MIPS - default n help Say Y if base address of system memory is being used as a virtual address instead of a physical address (e.g. on MIPS). The PCI core will then remap @@ -71,7 +68,6 @@ config PCI_MAP_SYSTEM_MEMORY config PCI_SRIOV bool "Enable Single Root I/O Virtualization support for PCI" depends on PCI || DM_PCI - default n help Say Y here if you want to enable PCI Single Root I/O Virtualization capability support. This helps to enumerate Virtual Function devices @@ -81,7 +77,6 @@ config PCI_SRIOV config PCI_ARID bool "Enable Alternate Routing-ID support for PCI" depends on PCI || DM_PCI - default n help Say Y here if you want to enable Alternate Routing-ID capability support on PCI devices. This helps to skip some devices in BDF @@ -89,7 +84,6 @@ config PCI_ARID config PCIE_ECAM_GENERIC bool "Generic ECAM-based PCI host controller support" - default n depends on DM_PCI help Say Y here if you want to enable support for generic ECAM-based @@ -97,7 +91,6 @@ config PCIE_ECAM_GENERIC config PCIE_ECAM_SYNQUACER bool "SynQuacer ECAM-based PCI host controller support" - default n depends on DM_PCI select PCI_INIT_R select PCI_REGION_MULTI_ENTRY @@ -209,7 +202,6 @@ config PCI_XILINX config PCIE_LAYERSCAPE bool - default n config PCIE_LAYERSCAPE_RC bool "Layerscape PCIe Root Complex mode support" diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig index 4240028403..b5f69c0a96 100644 --- a/drivers/phy/marvell/Kconfig +++ b/drivers/phy/marvell/Kconfig @@ -1,6 +1,5 @@ config MVEBU_COMPHY_SUPPORT bool "ComPhy SerDes driver" - default n help Choose this option to add support for Comphy driver. diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index c5fbf1f832..26257a72bc 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -248,7 +248,6 @@ endchoice config AXP_ALDO3_INRUSH_QUIRK bool "axp pmic (a)ldo3 inrush quirk" depends on AXP209_POWER - default n ---help--- The reference design denotes a value of 4.7 uF for the output capacitor of LDO3. Some boards have too high capacitance causing an inrush current @@ -357,7 +356,6 @@ config AXP_FLDO3_VOLT config AXP_SW_ON bool "axp pmic sw on" depends on AXP809_POWER || AXP818_POWER - default n ---help--- Enable to turn on axp pmic sw. diff --git a/drivers/ram/aspeed/Kconfig b/drivers/ram/aspeed/Kconfig index 049b9dc249..576d5af868 100644 --- a/drivers/ram/aspeed/Kconfig +++ b/drivers/ram/aspeed/Kconfig @@ -3,7 +3,6 @@ if RAM || SPL_RAM config ASPEED_DDR4_DUALX8 bool "Enable Dual X8 DDR4 die" depends on DM && OF_CONTROL && ARCH_ASPEED - default n help Say Y if dual X8 DDR4 die is used on the board. The aspeed ddr sdram controller needs to know if the memory chip mounted on the board is dual @@ -42,14 +41,12 @@ endchoice config ASPEED_BYPASS_SELFTEST bool "bypass self test during DRAM initialization" - default n help Say Y here to bypass DRAM self test to speed up the boot time config ASPEED_ECC bool "aspeed SDRAM error correcting code" depends on DM && OF_CONTROL && ARCH_ASPEED - default n help enable SDRAM ECC function diff --git a/drivers/ram/octeon/Kconfig b/drivers/ram/octeon/Kconfig index eb5a1208ed..f19957293f 100644 --- a/drivers/ram/octeon/Kconfig +++ b/drivers/ram/octeon/Kconfig @@ -1,7 +1,6 @@ config RAM_OCTEON bool "Ram drivers for Octeon SoCs" depends on RAM && ARCH_OCTEON - default n help This enables support for RAM drivers for Octeon SoCs. @@ -9,7 +8,6 @@ if RAM_OCTEON config RAM_OCTEON_DDR4 bool "Octeon III DDR4 RAM support" - default n help This enables support for DDR4 RAM suppoort for Octeon III. This does not include support for Octeon CN70XX. diff --git a/drivers/ram/stm32mp1/Kconfig b/drivers/ram/stm32mp1/Kconfig index 2fd8c7b7e3..1aaf064c30 100644 --- a/drivers/ram/stm32mp1/Kconfig +++ b/drivers/ram/stm32mp1/Kconfig @@ -23,7 +23,6 @@ config STM32MP1_DDR_INTERACTIVE config STM32MP1_DDR_INTERACTIVE_FORCE bool "STM32MP1 DDR driver : force interactive mode" depends on STM32MP1_DDR_INTERACTIVE - default n help force interactive mode in STM32MP1 DDR controller driver skip the polling of character 'd' in console diff --git a/drivers/reboot-mode/Kconfig b/drivers/reboot-mode/Kconfig index ac67bfcef6..63ea18cdf0 100644 --- a/drivers/reboot-mode/Kconfig +++ b/drivers/reboot-mode/Kconfig @@ -9,7 +9,6 @@ menu "Reboot Mode Support" config DM_REBOOT_MODE bool "Enable reboot mode using Driver Model" depends on DM - default n help Enable support for reboot mode control. This will allow users to adjust the boot process based on reboot mode parameter @@ -18,7 +17,6 @@ config DM_REBOOT_MODE config DM_REBOOT_MODE_GPIO bool "Use GPIOs as reboot mode backend" depends on DM_REBOOT_MODE - default n help Use GPIOs to control the reboot mode. This will allow users to boot a device in a specific mode by using a GPIO that can be controlled @@ -27,7 +25,6 @@ config DM_REBOOT_MODE_GPIO config DM_REBOOT_MODE_RTC bool "Use RTC as reboot mode backend" depends on DM_REBOOT_MODE - default n help Use RTC non volatile memory to control the reboot mode. This will allow users to boot a device in a specific mode by using a register(s) that can be controlled diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig index 94915d45b3..b1c5ab93d1 100644 --- a/drivers/rng/Kconfig +++ b/drivers/rng/Kconfig @@ -34,14 +34,12 @@ config RNG_MSM config RNG_STM32MP1 bool "Enable random number generator for STM32MP1" depends on ARCH_STM32MP - default n help Enable STM32MP1 rng driver. config RNG_ROCKCHIP bool "Enable random number generator for rockchip crypto rng" depends on ARCH_ROCKCHIP && DM_RNG - default n help Enable random number generator for rockchip.This driver is support rng module of crypto v1 and crypto v2. @@ -49,7 +47,6 @@ config RNG_ROCKCHIP config RNG_IPROC200 bool "Broadcom iProc RNG200 random number generator" depends on DM_RNG - default n help Enable random number generator for RPI4. endif diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 93348c0929..c972408826 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -137,7 +137,6 @@ config SERIAL_SEARCH_ALL config SERIAL_PROBE_ALL bool "Probe all available serial devices" depends on DM_SERIAL - default n help The serial subsystem only probes for a single serial device, but does not probe for other remaining serial devices. @@ -621,7 +620,6 @@ config FSL_LPUART config MVEBU_A3700_UART bool "UART support for Armada 3700" - default n help Choose this option to add support for UART driver on the Marvell Armada 3700 SoC. The base address is configured via DT. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 427b360af1..8957bb56a6 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -146,7 +146,6 @@ config USB_EHCI_MARVELL config USB_EHCI_MX5 bool "Support for i.MX5 on-chip EHCI USB controller" depends on ARCH_MX5 - default n help Enables support for the on-chip EHCI controller on i.MX5 SoCs. @@ -195,7 +194,6 @@ config USB_EHCI_MSM depends on DM_USB select USB_ULPI_VIEWPORT select MSM8916_USB_PHY - default n ---help--- Enables support for the on-chip EHCI controller on Qualcomm Snapdragon SoCs. @@ -222,13 +220,11 @@ config USB_EHCI_GENERIC bool "Support for generic EHCI USB controller" depends on DM_USB default ARCH_SUNXI - default n ---help--- Enables support for generic EHCI controller. config USB_EHCI_FSL bool "Support for FSL on-chip EHCI USB controller" - default n select CONFIG_EHCI_HCD_INIT_AFTER_RESET ---help--- Enables support for the on-chip EHCI controller on FSL chips. diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig index a9a7c2675e..6dd830cb73 100644 --- a/drivers/usb/musb-new/Kconfig +++ b/drivers/usb/musb-new/Kconfig @@ -34,7 +34,6 @@ config USB_MUSB_TI bool "Enable TI OTG USB controller" depends on AM33XX select USB_MUSB_DSPS - default n help Say y here to enable support for the dual role high speed USB controller based on the Mentor Graphics @@ -53,7 +52,6 @@ config USB_MUSB_DSPS config USB_MUSB_MT85XX bool "Enable Mediatek MT85XX DRC USB controller" depends on ARCH_MEDIATEK - default n help Say y to enable Mediatek MT85XX USB DRC controller support if it is available on your Mediatek MUSB IP based platform. diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 8b940d70eb..b1f8a9c1e6 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -259,7 +259,6 @@ config VIDEO_EFI config VIDEO_VESA bool "Enable VESA video driver support" - default n help Turn on this option to enable a very simple driver which uses vesa to discover the video mode and then provides a frame buffer for use @@ -406,7 +405,6 @@ config FRAMEBUFFER_VESA_MODE config VIDEO_LCD_ANX9804 bool "ANX9804 bridge chip" - default n ---help--- Support for the ANX9804 bridge chip, which can take pixel data coming from a parallel LCD interface and translate it on the fy into a DP @@ -416,7 +414,6 @@ config VIDEO_LCD_ORISETECH_OTM8009A bool "OTM8009A DSI LCD panel support" depends on DM_VIDEO select VIDEO_MIPI_DSI - default n help Say Y here if you want to enable support for Orise Technology otm8009a 480x800 dsi 2dl panel. @@ -425,14 +422,12 @@ config VIDEO_LCD_RAYDIUM_RM68200 bool "RM68200 DSI LCD panel support" depends on DM_VIDEO select VIDEO_MIPI_DSI - default n help Say Y here if you want to enable support for Raydium RM68200 720x1280 DSI video mode panel. config VIDEO_LCD_SSD2828 bool "SSD2828 bridge chip" - default n ---help--- Support for the SSD2828 bridge chip, which can take pixel data coming from a parallel LCD interface and translate it on the fly into MIPI DSI @@ -463,14 +458,12 @@ config VIDEO_LCD_TDO_TL070WSH30 bool "TDO TL070WSH30 DSI LCD panel support" depends on DM_VIDEO select VIDEO_MIPI_DSI - default n help Say Y here if you want to enable support for TDO TL070WSH30 1024x600 DSI video mode panel. config VIDEO_LCD_HITACHI_TX18D42VM bool "Hitachi tx18d42vm LVDS LCD panel support" - default n ---help--- Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a lcd controller which needs to be initialized over SPI, once that is @@ -523,7 +516,6 @@ source "drivers/video/meson/Kconfig" config VIDEO_MVEBU bool "Armada XP LCD controller" - default n ---help--- Support for the LCD controller integrated in the Marvell Armada XP SoC. @@ -536,14 +528,12 @@ config VIDEO_OMAP3 config I2C_EDID bool "Enable EDID library" - default n help This enables library for accessing EDID data from an LCD panel. config DISPLAY bool "Enable Display support" depends on DM - default n select I2C_EDID help This supports drivers that provide a display, such as eDP (Embedded @@ -554,7 +544,6 @@ config DISPLAY config NXP_TDA19988 bool "Enable NXP TDA19988 support" depends on DISPLAY - default n help This enables support for the NXP TDA19988 HDMI encoder. This encoder will convert RGB data streams into HDMI-encoded signals. @@ -868,7 +857,6 @@ config VIDEO_MCDE_SIMPLE config OSD bool "Enable OSD support" depends on DM - default n help This supports drivers that provide a OSD (on-screen display), which is a (usually text-oriented) graphics buffer to show information on @@ -1008,7 +996,6 @@ config BMP_32BPP config VIDEO_VCXK bool "Enable VCXK video controller driver support" - default n help This enables VCXK driver which can be used with VC2K, VC4K and VC8K devices on various boards from BuS Elektronik GmbH. diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig index 031bab25ae..a2c51083b1 100644 --- a/drivers/w1/Kconfig +++ b/drivers/w1/Kconfig @@ -6,7 +6,6 @@ menu "1-Wire support" config W1 bool "Enable 1-wire controllers support" - default no depends on DM help Support for the Dallas 1-Wire bus. @@ -15,14 +14,12 @@ if W1 config W1_GPIO bool "Enable 1-wire GPIO bitbanging" - default no depends on DM_GPIO help Emulate a 1-wire bus using a GPIO. config W1_MXC bool "Enable 1-wire controller on i.MX processors" - default no depends on ARCH_MX25 || ARCH_MX31 || ARCH_MX5 help Support the one wire controller found in some members of the NXP -- cgit v1.2.3