From a730393a362741c318b21771b8d7b2647e546c3e Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Tue, 30 Jun 2009 17:15:42 -0500 Subject: fsl_dma: Use proper I/O access functions Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- drivers/dma/fsl_dma.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c index baf29420f0b..33ea8285eb7 100644 --- a/drivers/dma/fsl_dma.c +++ b/drivers/dma/fsl_dma.c @@ -27,12 +27,13 @@ #include #include +#include #include #if defined(CONFIG_MPC85xx) -volatile ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR); +ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR); #elif defined(CONFIG_MPC86xx) -volatile ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR); +ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR); #else #error "Freescale DMA engine not supported on your processor" #endif @@ -48,14 +49,15 @@ static void dma_sync(void) static uint dma_check(void) { volatile fsl_dma_t *dma = &dma_base->dma[0]; - volatile uint status = dma->sr; + uint status; /* While the channel is busy, spin */ - while (status & FSL_DMA_SR_CB) - status = dma->sr; + do { + status = in_be32(&dma->sr); + } while (status & FSL_DMA_SR_CB); /* clear MR[CS] channel start bit */ - dma->mr &= FSL_DMA_MR_CS; + out_be32(&dma->mr, in_be32(&dma->mr) & FSL_DMA_MR_CS); dma_sync(); if (status != 0) @@ -67,25 +69,27 @@ static uint dma_check(void) { void dma_init(void) { volatile fsl_dma_t *dma = &dma_base->dma[0]; - dma->satr = FSL_DMA_SATR_SREAD_NO_SNOOP; - dma->datr = FSL_DMA_DATR_DWRITE_NO_SNOOP; - dma->sr = 0xffffffff; /* clear any errors */ + out_be32(&dma->satr, FSL_DMA_SATR_SREAD_NO_SNOOP); + out_be32(&dma->datr, FSL_DMA_DATR_DWRITE_NO_SNOOP); + out_be32(&dma->sr, 0xffffffff); /* clear any errors */ dma_sync(); } int dma_xfer(void *dest, uint count, void *src) { volatile fsl_dma_t *dma = &dma_base->dma[0]; - dma->dar = (uint) dest; - dma->sar = (uint) src; - dma->bcr = count; + out_be32(&dma->dar, (uint) dest); + out_be32(&dma->sar, (uint) src); + out_be32(&dma->bcr, count); /* Disable bandwidth control, use direct transfer mode */ - dma->mr = FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT; + out_be32(&dma->mr, FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT); dma_sync(); /* Start the transfer */ - dma->mr = FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT | FSL_DMA_MR_CS; + out_be32(&dma->mr, FSL_DMA_MR_BWC_DIS | + FSL_DMA_MR_CTM_DIRECT | + FSL_DMA_MR_CS); dma_sync(); return dma_check(); -- cgit v1.2.3