From 1df49e27bca2b0d36a506b0da90f6e92771c0982 Mon Sep 17 00:00:00 2001 From: wdenk Date: Tue, 17 Sep 2002 21:37:55 +0000 Subject: Initial revision --- drivers/eepro100.c | 820 ++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/sym53c8xx.c | 799 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/w83c553f.c | 226 +++++++++++++++ 3 files changed, 1845 insertions(+) create mode 100644 drivers/eepro100.c create mode 100644 drivers/sym53c8xx.c create mode 100644 drivers/w83c553f.c (limited to 'drivers') diff --git a/drivers/eepro100.c b/drivers/eepro100.c new file mode 100644 index 0000000000..c8d07de8b6 --- /dev/null +++ b/drivers/eepro100.c @@ -0,0 +1,820 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#undef DEBUG + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ + defined(CONFIG_EEPRO100) + + /* Ethernet chip registers. + */ +#define SCBStatus 0 /* Rx/Command Unit Status *Word* */ +#define SCBIntAckByte 1 /* Rx/Command Unit STAT/ACK byte */ +#define SCBCmd 2 /* Rx/Command Unit Command *Word* */ +#define SCBIntrCtlByte 3 /* Rx/Command Unit Intr.Control Byte */ +#define SCBPointer 4 /* General purpose pointer. */ +#define SCBPort 8 /* Misc. commands and operands. */ +#define SCBflash 12 /* Flash memory control. */ +#define SCBeeprom 14 /* EEPROM memory control. */ +#define SCBCtrlMDI 16 /* MDI interface control. */ +#define SCBEarlyRx 20 /* Early receive byte count. */ +#define SCBGenControl 28 /* 82559 General Control Register */ +#define SCBGenStatus 29 /* 82559 General Status register */ + + /* 82559 SCB status word defnitions + */ +#define SCB_STATUS_CX 0x8000 /* CU finished command (transmit) */ +#define SCB_STATUS_FR 0x4000 /* frame received */ +#define SCB_STATUS_CNA 0x2000 /* CU left active state */ +#define SCB_STATUS_RNR 0x1000 /* receiver left ready state */ +#define SCB_STATUS_MDI 0x0800 /* MDI read/write cycle done */ +#define SCB_STATUS_SWI 0x0400 /* software generated interrupt */ +#define SCB_STATUS_FCP 0x0100 /* flow control pause interrupt */ + +#define SCB_INTACK_MASK 0xFD00 /* all the above */ + +#define SCB_INTACK_TX (SCB_STATUS_CX | SCB_STATUS_CNA) +#define SCB_INTACK_RX (SCB_STATUS_FR | SCB_STATUS_RNR) + + /* System control block commands + */ +/* CU Commands */ +#define CU_NOP 0x0000 +#define CU_START 0x0010 +#define CU_RESUME 0x0020 +#define CU_STATSADDR 0x0040 /* Load Dump Statistics ctrs addr */ +#define CU_SHOWSTATS 0x0050 /* Dump statistics counters. */ +#define CU_ADDR_LOAD 0x0060 /* Base address to add to CU commands */ +#define CU_DUMPSTATS 0x0070 /* Dump then reset stats counters. */ + +/* RUC Commands */ +#define RUC_NOP 0x0000 +#define RUC_START 0x0001 +#define RUC_RESUME 0x0002 +#define RUC_ABORT 0x0004 +#define RUC_ADDR_LOAD 0x0006 /* (seems not to clear on acceptance) */ +#define RUC_RESUMENR 0x0007 + +#define CU_CMD_MASK 0x00f0 +#define RU_CMD_MASK 0x0007 + +#define SCB_M 0x0100 /* 0 = enable interrupt, 1 = disable */ +#define SCB_SWI 0x0200 /* 1 - cause device to interrupt */ + +#define CU_STATUS_MASK 0x00C0 +#define RU_STATUS_MASK 0x003C + +#define RU_STATUS_IDLE (0<<2) +#define RU_STATUS_SUS (1<<2) +#define RU_STATUS_NORES (2<<2) +#define RU_STATUS_READY (4<<2) +#define RU_STATUS_NO_RBDS_SUS ((1<<2)|(8<<2)) +#define RU_STATUS_NO_RBDS_NORES ((2<<2)|(8<<2)) +#define RU_STATUS_NO_RBDS_READY ((4<<2)|(8<<2)) + + /* 82559 Port interface commands. + */ +#define I82559_RESET 0x00000000 /* Software reset */ +#define I82559_SELFTEST 0x00000001 /* 82559 Selftest command */ +#define I82559_SELECTIVE_RESET 0x00000002 +#define I82559_DUMP 0x00000003 +#define I82559_DUMP_WAKEUP 0x00000007 + + /* 82559 Eeprom interface. + */ +#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */ +#define EE_CS 0x02 /* EEPROM chip select. */ +#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */ +#define EE_WRITE_0 0x01 +#define EE_WRITE_1 0x05 +#define EE_DATA_READ 0x08 /* EEPROM chip data out. */ +#define EE_ENB (0x4800 | EE_CS) +#define EE_CMD_BITS 3 +#define EE_DATA_BITS 16 + + /* The EEPROM commands include the alway-set leading bit. + */ +#define EE_EWENB_CMD (4 << addr_len) +#define EE_WRITE_CMD (5 << addr_len) +#define EE_READ_CMD (6 << addr_len) +#define EE_ERASE_CMD (7 << addr_len) + + /* Receive frame descriptors. + */ +struct RxFD { + volatile u16 status; + volatile u16 control; + volatile u32 link; /* struct RxFD * */ + volatile u32 rx_buf_addr; /* void * */ + volatile u32 count; + + volatile u8 data[PKTSIZE_ALIGN]; +}; + +#define RFD_STATUS_C 0x8000 /* completion of received frame */ +#define RFD_STATUS_OK 0x2000 /* frame received with no errors */ + +#define RFD_CONTROL_EL 0x8000 /* 1=last RFD in RFA */ +#define RFD_CONTROL_S 0x4000 /* 1=suspend RU after receiving frame */ +#define RFD_CONTROL_H 0x0010 /* 1=RFD is a header RFD */ +#define RFD_CONTROL_SF 0x0008 /* 0=simplified, 1=flexible mode */ + +#define RFD_COUNT_MASK 0x3fff +#define RFD_COUNT_F 0x4000 +#define RFD_COUNT_EOF 0x8000 + +#define RFD_RX_CRC 0x0800 /* crc error */ +#define RFD_RX_ALIGNMENT 0x0400 /* alignment error */ +#define RFD_RX_RESOURCE 0x0200 /* out of space, no resources */ +#define RFD_RX_DMA_OVER 0x0100 /* DMA overrun */ +#define RFD_RX_SHORT 0x0080 /* short frame error */ +#define RFD_RX_LENGTH 0x0020 +#define RFD_RX_ERROR 0x0010 /* receive error */ +#define RFD_RX_NO_ADR_MATCH 0x0004 /* no address match */ +#define RFD_RX_IA_MATCH 0x0002 /* individual address does not match */ +#define RFD_RX_TCO 0x0001 /* TCO indication */ + + /* Transmit frame descriptors + */ +struct TxFD { /* Transmit frame descriptor set. */ + volatile u16 status; + volatile u16 command; + volatile u32 link; /* void * */ + volatile u32 tx_desc_addr; /* Always points to the tx_buf_addr element. */ + volatile s32 count; + + volatile u32 tx_buf_addr0; /* void *, frame to be transmitted. */ + volatile s32 tx_buf_size0; /* Length of Tx frame. */ + volatile u32 tx_buf_addr1; /* void *, frame to be transmitted. */ + volatile s32 tx_buf_size1; /* Length of Tx frame. */ +}; + +#define TxCB_CMD_TRANSMIT 0x0004 /* transmit command */ +#define TxCB_CMD_SF 0x0008 /* 0=simplified, 1=flexible mode */ +#define TxCB_CMD_NC 0x0010 /* 0=CRC insert by controller */ +#define TxCB_CMD_I 0x2000 /* generate interrupt on completion */ +#define TxCB_CMD_S 0x4000 /* suspend on completion */ +#define TxCB_CMD_EL 0x8000 /* last command block in CBL */ + +#define TxCB_COUNT_MASK 0x3fff +#define TxCB_COUNT_EOF 0x8000 + + /* The Speedo3 Rx and Tx frame/buffer descriptors. + */ +struct descriptor { /* A generic descriptor. */ + volatile u16 status; + volatile u16 command; + volatile u32 link; /* struct descriptor * */ + + unsigned char params[0]; +}; + +#define CFG_CMD_EL 0x8000 +#define CFG_CMD_SUSPEND 0x4000 +#define CFG_CMD_INT 0x2000 +#define CFG_CMD_IAS 0x0001 /* individual address setup */ +#define CFG_CMD_CONFIGURE 0x0002 /* configure */ + +#define CFG_STATUS_C 0x8000 +#define CFG_STATUS_OK 0x2000 + + /* Misc. + */ +#define NUM_RX_DESC PKTBUFSRX +#define NUM_TX_DESC 1 /* Number of TX descriptors */ + +#define TOUT_LOOP 1000000 + +#define ETH_ALEN 6 + +static struct RxFD rx_ring[NUM_RX_DESC]; /* RX descriptor ring */ +static struct TxFD tx_ring[NUM_TX_DESC]; /* TX descriptor ring */ +static int rx_next; /* RX descriptor ring pointer */ +static int tx_next; /* TX descriptor ring pointer */ +static int tx_threshold; + +/* + * The parameters for a CmdConfigure operation. + * There are so many options that it would be difficult to document + * each bit. We mostly use the default or recommended settings. + */ +static const char i82557_config_cmd[] = { + 22, 0x08, 0, 0, 0, 0, 0x32, 0x03, 1, /* 1=Use MII 0=Use AUI */ + 0, 0x2E, 0, 0x60, 0, + 0xf2, 0x48, 0, 0x40, 0xf2, 0x80, /* 0x40=Force full-duplex */ + 0x3f, 0x05, +}; +static const char i82558_config_cmd[] = { + 22, 0x08, 0, 1, 0, 0, 0x22, 0x03, 1, /* 1=Use MII 0=Use AUI */ + 0, 0x2E, 0, 0x60, 0x08, 0x88, + 0x68, 0, 0x40, 0xf2, 0x84, /* Disable FC */ + 0x31, 0x05, +}; + +static void init_rx_ring (struct eth_device *dev); +static void purge_tx_ring (struct eth_device *dev); + +static void read_hw_addr (struct eth_device *dev, bd_t * bis); + +static int eepro100_init (struct eth_device *dev, bd_t * bis); +static int eepro100_send (struct eth_device *dev, volatile void *packet, + int length); +static int eepro100_recv (struct eth_device *dev); +static void eepro100_halt (struct eth_device *dev); + +#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a) +#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a) + +static inline int INW (struct eth_device *dev, u_long addr) +{ + return le16_to_cpu (*(volatile u16 *) (addr + dev->iobase)); +} + +static inline void OUTW (struct eth_device *dev, int command, u_long addr) +{ + *(volatile u16 *) ((addr + dev->iobase)) = cpu_to_le16 (command); +} + +static inline void OUTL (struct eth_device *dev, int command, u_long addr) +{ + *(volatile u32 *) ((addr + dev->iobase)) = cpu_to_le32 (command); +} + + /* Wait for the chip get the command. + */ +static int wait_for_eepro100 (struct eth_device *dev) +{ + int i; + + for (i = 0; INW (dev, SCBCmd) & (CU_CMD_MASK | RU_CMD_MASK); i++) { + if (i >= TOUT_LOOP) { + return 0; + } + } + + return 1; +} + +static struct pci_device_id supported[] = { + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82557}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82559}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82559ER}, + {} +}; + +int eepro100_initialize (bd_t * bis) +{ + pci_dev_t devno; + int card_number = 0; + struct eth_device *dev; + u32 iobase, status; + int idx = 0; + + while (1) { + /* Find PCI device + */ + if ((devno = pci_find_devices (supported, idx++)) < 0) { + break; + } + + pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, &iobase); + iobase &= ~0xf; + +#ifdef DEBUG + printf ("eepro100: Intel i82559 PCI EtherExpressPro @0x%x\n", + iobase); +#endif + + pci_write_config_dword (devno, + PCI_COMMAND, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + /* Check if I/O accesses and Bus Mastering are enabled. + */ + pci_read_config_dword (devno, PCI_COMMAND, &status); + if (!(status & PCI_COMMAND_MEMORY)) { + printf ("Error: Can not enable MEM access.\n"); + continue; + } + + if (!(status & PCI_COMMAND_MASTER)) { + printf ("Error: Can not enable Bus Mastering.\n"); + continue; + } + + dev = (struct eth_device *) malloc (sizeof *dev); + + sprintf (dev->name, "i82559#%d", card_number); + dev->iobase = bus_to_phys (iobase); + dev->priv = (void *) devno; + dev->init = eepro100_init; + dev->halt = eepro100_halt; + dev->send = eepro100_send; + dev->recv = eepro100_recv; + + eth_register (dev); + + card_number++; + + /* Set the latency timer for value. + */ + pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20); + + udelay (10 * 1000); + + read_hw_addr (dev, bis); + } + + return card_number; +} + + +static int eepro100_init (struct eth_device *dev, bd_t * bis) +{ + int i, status = 0; + int tx_cur; + struct descriptor *ias_cmd, *cfg_cmd; + + /* Reset the ethernet controller + */ + OUTL (dev, I82559_SELECTIVE_RESET, SCBPort); + udelay (20); + + OUTL (dev, I82559_RESET, SCBPort); + udelay (20); + + if (!wait_for_eepro100 (dev)) { + printf ("Error: Can not reset ethernet controller.\n"); + goto Done; + } + OUTL (dev, 0, SCBPointer); + OUTW (dev, SCB_M | RUC_ADDR_LOAD, SCBCmd); + + if (!wait_for_eepro100 (dev)) { + printf ("Error: Can not reset ethernet controller.\n"); + goto Done; + } + OUTL (dev, 0, SCBPointer); + OUTW (dev, SCB_M | CU_ADDR_LOAD, SCBCmd); + + /* Initialize Rx and Tx rings. + */ + init_rx_ring (dev); + purge_tx_ring (dev); + + /* Tell the adapter where the RX ring is located. + */ + if (!wait_for_eepro100 (dev)) { + printf ("Error: Can not reset ethernet controller.\n"); + goto Done; + } + + OUTL (dev, phys_to_bus ((u32) & rx_ring[rx_next]), SCBPointer); + OUTW (dev, SCB_M | RUC_START, SCBCmd); + + /* Send the Configure frame */ + tx_cur = tx_next; + tx_next = ((tx_next + 1) % NUM_TX_DESC); + + cfg_cmd = (struct descriptor *) &tx_ring[tx_cur]; + cfg_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_CONFIGURE)); + cfg_cmd->status = 0; + cfg_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next])); + + memcpy (cfg_cmd->params, i82558_config_cmd, + sizeof (i82558_config_cmd)); + + if (!wait_for_eepro100 (dev)) { + printf ("Error---CFG_CMD_CONFIGURE: Can not reset ethernet controller.\n"); + goto Done; + } + + OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer); + OUTW (dev, SCB_M | CU_START, SCBCmd); + + for (i = 0; + !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C); + i++) { + if (i >= TOUT_LOOP) { + printf ("%s: Tx error buffer not ready\n", dev->name); + goto Done; + } + } + + if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) { + printf ("TX error status = 0x%08X\n", + le16_to_cpu (tx_ring[tx_cur].status)); + goto Done; + } + + /* Send the Individual Address Setup frame + */ + tx_cur = tx_next; + tx_next = ((tx_next + 1) % NUM_TX_DESC); + + ias_cmd = (struct descriptor *) &tx_ring[tx_cur]; + ias_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_IAS)); + ias_cmd->status = 0; + ias_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next])); + + memcpy (ias_cmd->params, dev->enetaddr, 6); + + /* Tell the adapter where the TX ring is located. + */ + if (!wait_for_eepro100 (dev)) { + printf ("Error: Can not reset ethernet controller.\n"); + goto Done; + } + + OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer); + OUTW (dev, SCB_M | CU_START, SCBCmd); + + for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C); + i++) { + if (i >= TOUT_LOOP) { + printf ("%s: Tx error buffer not ready\n", + dev->name); + goto Done; + } + } + + if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) { + printf ("TX error status = 0x%08X\n", + le16_to_cpu (tx_ring[tx_cur].status)); + goto Done; + } + + status = 1; + + Done: + return status; +} + +static int eepro100_send (struct eth_device *dev, volatile void *packet, int length) +{ + int i, status = -1; + int tx_cur; + + if (length <= 0) { + printf ("%s: bad packet size: %d\n", dev->name, length); + goto Done; + } + + tx_cur = tx_next; + tx_next = (tx_next + 1) % NUM_TX_DESC; + + tx_ring[tx_cur].command = cpu_to_le16 ( TxCB_CMD_TRANSMIT | + TxCB_CMD_SF | + TxCB_CMD_S | + TxCB_CMD_EL ); + tx_ring[tx_cur].status = 0; + tx_ring[tx_cur].count = cpu_to_le32 (tx_threshold); + tx_ring[tx_cur].link = + cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next])); + tx_ring[tx_cur].tx_desc_addr = + cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_cur].tx_buf_addr0)); + tx_ring[tx_cur].tx_buf_addr0 = + cpu_to_le32 (phys_to_bus ((u_long) packet)); + tx_ring[tx_cur].tx_buf_size0 = cpu_to_le32 (length); + + if (!wait_for_eepro100 (dev)) { + printf ("%s: Tx error ethernet controller not ready.\n", + dev->name); + goto Done; + } + + /* Send the packet. + */ + OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer); + OUTW (dev, SCB_M | CU_START, SCBCmd); + + for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C); + i++) { + if (i >= TOUT_LOOP) { + printf ("%s: Tx error buffer not ready\n", dev->name); + goto Done; + } + } + + if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) { + printf ("TX error status = 0x%08X\n", + le16_to_cpu (tx_ring[tx_cur].status)); + goto Done; + } + + status = length; + + Done: + return status; +} + +static int eepro100_recv (struct eth_device *dev) +{ + u16 status, stat; + int rx_prev, length = 0; + + stat = INW (dev, SCBStatus); + OUTW (dev, stat & SCB_STATUS_RNR, SCBStatus); + + for (;;) { + status = le16_to_cpu (rx_ring[rx_next].status); + + if (!(status & RFD_STATUS_C)) { + break; + } + + /* Valid frame status. + */ + if ((status & RFD_STATUS_OK)) { + /* A valid frame received. + */ + length = le32_to_cpu (rx_ring[rx_next].count) & 0x3fff; + + /* Pass the packet up to the protocol + * layers. + */ + NetReceive (rx_ring[rx_next].data, length); + } else { + /* There was an error. + */ + printf ("RX error status = 0x%08X\n", status); + } + + rx_ring[rx_next].control = cpu_to_le16 (RFD_CONTROL_S); + rx_ring[rx_next].status = 0; + rx_ring[rx_next].count = cpu_to_le32 (PKTSIZE_ALIGN << 16); + + rx_prev = (rx_next + NUM_RX_DESC - 1) % NUM_RX_DESC; + rx_ring[rx_prev].control = 0; + + /* Update entry information. + */ + rx_next = (rx_next + 1) % NUM_RX_DESC; + } + + if (stat & SCB_STATUS_RNR) { + + printf ("%s: Receiver is not ready, restart it !\n", dev->name); + + /* Reinitialize Rx ring. + */ + init_rx_ring (dev); + + if (!wait_for_eepro100 (dev)) { + printf ("Error: Can not restart ethernet controller.\n"); + goto Done; + } + + OUTL (dev, phys_to_bus ((u32) & rx_ring[rx_next]), SCBPointer); + OUTW (dev, SCB_M | RUC_START, SCBCmd); + } + + Done: + return length; +} + +static void eepro100_halt (struct eth_device *dev) +{ + /* Reset the ethernet controller + */ + OUTL (dev, I82559_SELECTIVE_RESET, SCBPort); + udelay (20); + + OUTL (dev, I82559_RESET, SCBPort); + udelay (20); + + if (!wait_for_eepro100 (dev)) { + printf ("Error: Can not reset ethernet controller.\n"); + goto Done; + } + OUTL (dev, 0, SCBPointer); + OUTW (dev, SCB_M | RUC_ADDR_LOAD, SCBCmd); + + if (!wait_for_eepro100 (dev)) { + printf ("Error: Can not reset ethernet controller.\n"); + goto Done; + } + OUTL (dev, 0, SCBPointer); + OUTW (dev, SCB_M | CU_ADDR_LOAD, SCBCmd); + + Done: + return; +} + + /* SROM Read. + */ +static int read_eeprom (struct eth_device *dev, int location, int addr_len) +{ + unsigned short retval = 0; + int read_cmd = location | EE_READ_CMD; + int i; + + OUTW (dev, EE_ENB & ~EE_CS, SCBeeprom); + OUTW (dev, EE_ENB, SCBeeprom); + + /* Shift the read command bits out. */ + for (i = 12; i >= 0; i--) { + short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; + + OUTW (dev, EE_ENB | dataval, SCBeeprom); + udelay (1); + OUTW (dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom); + udelay (1); + } + OUTW (dev, EE_ENB, SCBeeprom); + + for (i = 15; i >= 0; i--) { + OUTW (dev, EE_ENB | EE_SHIFT_CLK, SCBeeprom); + udelay (1); + retval = (retval << 1) | + ((INW (dev, SCBeeprom) & EE_DATA_READ) ? 1 : 0); + OUTW (dev, EE_ENB, SCBeeprom); + udelay (1); + } + + /* Terminate the EEPROM access. */ + OUTW (dev, EE_ENB & ~EE_CS, SCBeeprom); + return retval; +} + +#ifdef CONFIG_EEPRO100_SROM_WRITE +int eepro100_write_eeprom (struct eth_device* dev, int location, int addr_len, unsigned short data) +{ + unsigned short dataval; + int enable_cmd = 0x3f | EE_EWENB_CMD; + int write_cmd = location | EE_WRITE_CMD; + int i; + unsigned long datalong, tmplong; + + OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom); + udelay(1); + OUTW(dev, EE_ENB, SCBeeprom); + + /* Shift the enable command bits out. */ + for (i = (addr_len+EE_CMD_BITS-1); i >= 0; i--) + { + dataval = (enable_cmd & (1 << i)) ? EE_DATA_WRITE : 0; + OUTW(dev, EE_ENB | dataval, SCBeeprom); + udelay(1); + OUTW(dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom); + udelay(1); + } + + OUTW(dev, EE_ENB, SCBeeprom); + udelay(1); + OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom); + udelay(1); + OUTW(dev, EE_ENB, SCBeeprom); + + + /* Shift the write command bits out. */ + for (i = (addr_len+EE_CMD_BITS-1); i >= 0; i--) + { + dataval = (write_cmd & (1 << i)) ? EE_DATA_WRITE : 0; + OUTW(dev, EE_ENB | dataval, SCBeeprom); + udelay(1); + OUTW(dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom); + udelay(1); + } + + /* Write the data */ + datalong= (unsigned long) ((((data) & 0x00ff) << 8) | ( (data) >> 8)); + + for (i = 0; i< EE_DATA_BITS; i++) + { + /* Extract and move data bit to bit DI */ + dataval = ((datalong & 0x8000)>>13) ? EE_DATA_WRITE : 0; + + OUTW(dev, EE_ENB | dataval, SCBeeprom); + udelay(1); + OUTW(dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom); + udelay(1); + OUTW(dev, EE_ENB | dataval, SCBeeprom); + udelay(1); + + datalong = datalong << 1; /* Adjust significant data bit*/ + } + + /* Finish up command (toggle CS) */ + OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom); + udelay(1); /* delay for more than 250 ns */ + OUTW(dev, EE_ENB, SCBeeprom); + + /* Wait for programming ready (D0 = 1) */ + tmplong = 10; + do + { + dataval = INW(dev, SCBeeprom); + if (dataval & EE_DATA_READ) + break; + udelay(10000); + } + while (-- tmplong); + + if (tmplong == 0) + { + printf ("Write i82559 eeprom timed out (100 ms waiting for data ready.\n"); + return -1; + } + + /* Terminate the EEPROM access. */ + OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom); + + return 0; +} +#endif + +static void init_rx_ring (struct eth_device *dev) +{ + int i; + + for (i = 0; i < NUM_RX_DESC; i++) { + rx_ring[i].status = 0; + rx_ring[i].control = + (i == NUM_RX_DESC - 1) ? cpu_to_le16 (RFD_CONTROL_S) : 0; + rx_ring[i].link = + cpu_to_le32 (phys_to_bus + ((u32) & rx_ring[(i + 1) % NUM_RX_DESC])); + rx_ring[i].rx_buf_addr = 0xffffffff; + rx_ring[i].count = cpu_to_le32 (PKTSIZE_ALIGN << 16); + } + + rx_next = 0; +} + +static void purge_tx_ring (struct eth_device *dev) +{ + int i; + + tx_next = 0; + tx_threshold = 0x01208000; + + for (i = 0; i < NUM_TX_DESC; i++) { + tx_ring[i].status = 0; + tx_ring[i].command = 0; + tx_ring[i].link = 0; + tx_ring[i].tx_desc_addr = 0; + tx_ring[i].count = 0; + + tx_ring[i].tx_buf_addr0 = 0; + tx_ring[i].tx_buf_size0 = 0; + tx_ring[i].tx_buf_addr1 = 0; + tx_ring[i].tx_buf_size1 = 0; + } +} + +static void read_hw_addr (struct eth_device *dev, bd_t * bis) +{ + u16 eeprom[0x40]; + u16 sum = 0; + int i, j; + int addr_len = read_eeprom (dev, 0, 6) == 0xffff ? 8 : 6; + + for (j = 0, i = 0; i < 0x40; i++) { + u16 value = read_eeprom (dev, i, addr_len); + + eeprom[i] = value; + sum += value; + if (i < 3) { + dev->enetaddr[j++] = value; + dev->enetaddr[j++] = value >> 8; + } + } + + if (sum != 0xBABA) { + memset (dev->enetaddr, 0, ETH_ALEN); +#ifdef DEBUG + printf ("%s: Invalid EEPROM checksum %#4.4x, " + "check settings before activating this device!\n", + dev->name, sum); +#endif + } +} + +#endif diff --git a/drivers/sym53c8xx.c b/drivers/sym53c8xx.c new file mode 100644 index 0000000000..e03a04924d --- /dev/null +++ b/drivers/sym53c8xx.c @@ -0,0 +1,799 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * partly derived from + * linux/drivers/scsi/sym53c8xx.c + * + */ + +/* + * SCSI support based on the chip sym53C810. + * + * 09-19-2001 Andreas Heppel, Sysgo RTS GmbH + * The local version of this driver for the BAB750 board does not + * use interrupts but polls the chip instead (see the call of + * 'handle_scsi_int()' in 'scsi_issue()'. + */ + +#include + +#ifdef CONFIG_SCSI_SYM53C8XX + +#include +#include +#include +#include +#include +#include + +#undef SYM53C8XX_DEBUG + +#ifdef SYM53C8XX_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX) + +#undef SCSI_SINGLE_STEP +/* + * Single Step is only used for debug purposes + */ +#ifdef SCSI_SINGLE_STEP +static unsigned long start_script_select; +static unsigned long start_script_msgout; +static unsigned long start_script_msgin; +static unsigned long start_script_msg_ext; +static unsigned long start_script_cmd; +static unsigned long start_script_data_in; +static unsigned long start_script_data_out; +static unsigned long start_script_status; +static unsigned long start_script_complete; +static unsigned long start_script_error; +static unsigned long start_script_reselection; +static unsigned int len_script_select; +static unsigned int len_script_msgout; +static unsigned int len_script_msgin; +static unsigned int len_script_msg_ext; +static unsigned int len_script_cmd; +static unsigned int len_script_data_in; +static unsigned int len_script_data_out; +static unsigned int len_script_status; +static unsigned int len_script_complete; +static unsigned int len_script_error; +static unsigned int len_script_reselection; +#endif + + +static unsigned short scsi_int_mask; /* shadow register for SCSI related interrupts */ +static unsigned char script_int_mask; /* shadow register for SCRIPT related interrupts */ +static unsigned long script_select[8]; /* script for selection */ +static unsigned long script_msgout[8]; /* script for message out phase (NOT USED) */ +static unsigned long script_msgin[14]; /* script for message in phase */ +static unsigned long script_msg_ext[32]; /* script for message in phase when more than 1 byte message */ +static unsigned long script_cmd[18]; /* script for command phase */ +static unsigned long script_data_in[8]; /* script for data in phase */ +static unsigned long script_data_out[8]; /* script for data out phase */ +static unsigned long script_status[6]; /* script for status phase */ +static unsigned long script_complete[10]; /* script for complete */ +static unsigned long script_reselection[4]; /* script for reselection (NOT USED) */ +static unsigned long script_error[2]; /* script for error handling */ + +static unsigned long int_stat[3]; /* interrupt status */ +static unsigned long scsi_mem_addr; /* base memory address =SCSI_MEM_ADDRESS; */ + +#define bus_to_phys(a) pci_mem_to_phys(busdevfunc, (unsigned long) (a)) +#define phys_to_bus(a) pci_phys_to_mem(busdevfunc, (unsigned long) (a)) + +#define SCSI_MAX_RETRY 3 /* number of retries in scsi_issue() */ + +#define SCSI_MAX_RETRY_NOT_READY 10 /* number of retries when device is not ready */ +#define SCSI_NOT_READY_TIME_OUT 500 /* timeout per retry when not ready */ + +/********************************************************************************* + * forward declerations + */ + +void scsi_chip_init(void); +void handle_scsi_int(void); + + +/******************************************************************************** + * reports SCSI errors to the user + */ +void scsi_print_error(ccb *pccb) +{ + int i; + printf("SCSI Error: Target %d LUN %d Command %02X\n",pccb->target, pccb->lun, pccb->cmd[0]); + printf(" CCB: "); + for(i=0;icmdlen;i++) + printf("%02X ",pccb->cmd[i]); + printf("(len=%d)\n",pccb->cmdlen); + printf(" Cntrl: "); + switch(pccb->contr_stat) { + case SIR_COMPLETE: printf("Complete (no Error)\n"); break; + case SIR_SEL_ATN_NO_MSG_OUT: printf("Selected with ATN no MSG out phase\n"); break; + case SIR_CMD_OUT_ILL_PH: printf("Command out illegal phase\n"); break; + case SIR_MSG_RECEIVED: printf("MSG received Error\n"); break; + case SIR_DATA_IN_ERR: printf("Data in Error\n"); break; + case SIR_DATA_OUT_ERR: printf("Data out Error\n"); break; + case SIR_SCRIPT_ERROR: printf("Script Error\n"); break; + case SIR_MSG_OUT_NO_CMD: printf("MSG out no Command phase\n"); break; + case SIR_MSG_OVER7: printf("MSG in over 7 bytes\n"); break; + case INT_ON_FY: printf("Interrupt on fly\n"); break; + case SCSI_SEL_TIME_OUT: printf("SCSI Selection Timeout\n"); break; + case SCSI_HNS_TIME_OUT: printf("SCSI Handshake Timeout\n"); break; + case SCSI_MA_TIME_OUT: printf("SCSI Phase Error\n"); break; + case SCSI_UNEXP_DIS: printf("SCSI unexpected disconnect\n"); break; + default: printf("unknown status %lx\n",pccb->contr_stat); break; + } + printf(" Sense: SK %x (",pccb->sense_buf[2]&0x0f); + switch(pccb->sense_buf[2]&0xf) { + case SENSE_NO_SENSE: printf("No Sense)"); break; + case SENSE_RECOVERED_ERROR: printf("Recovered Error)"); break; + case SENSE_NOT_READY: printf("Not Ready)"); break; + case SENSE_MEDIUM_ERROR: printf("Medium Error)"); break; + case SENSE_HARDWARE_ERROR: printf("Hardware Error)"); break; + case SENSE_ILLEGAL_REQUEST: printf("Illegal request)"); break; + case SENSE_UNIT_ATTENTION: printf("Unit Attention)"); break; + case SENSE_DATA_PROTECT: printf("Data Protect)"); break; + case SENSE_BLANK_CHECK: printf("Blank check)"); break; + case SENSE_VENDOR_SPECIFIC: printf("Vendor specific)"); break; + case SENSE_COPY_ABORTED: printf("Copy aborted)"); break; + case SENSE_ABORTED_COMMAND: printf("Aborted Command)"); break; + case SENSE_VOLUME_OVERFLOW: printf("Volume overflow)"); break; + case SENSE_MISCOMPARE: printf("Misscompare\n"); break; + default: printf("Illegal Sensecode\n"); break; + } + printf(" ASC %x ASCQ %x\n",pccb->sense_buf[12],pccb->sense_buf[13]); + printf(" Status: "); + switch(pccb->status) { + case S_GOOD : printf("Good\n"); break; + case S_CHECK_COND: printf("Check condition\n"); break; + case S_COND_MET: printf("Condition Met\n"); break; + case S_BUSY: printf("Busy\n"); break; + case S_INT: printf("Intermediate\n"); break; + case S_INT_COND_MET: printf("Intermediate condition met\n"); break; + case S_CONFLICT: printf("Reservation conflict\n"); break; + case S_TERMINATED: printf("Command terminated\n"); break; + case S_QUEUE_FULL: printf("Task set full\n"); break; + default: printf("unknown: %02X\n",pccb->status); break; + } + +} + + + +/****************************************************************************** + * sets-up the SCSI controller + * the base memory address is retrived via the pci_read_config_dword + */ +void scsi_low_level_init(int busdevfunc) +{ + unsigned int cmd; + unsigned int addr; + unsigned char vec; + + pci_read_config_byte(busdevfunc, PCI_INTERRUPT_LINE, &vec); + pci_read_config_dword(busdevfunc, PCI_BASE_ADDRESS_1, &addr); + + addr = bus_to_phys(addr & ~0xf); + + /* + * Enable bus mastering in case this has not been done, yet. + */ + pci_read_config_dword(busdevfunc, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER; + pci_write_config_dword(busdevfunc, PCI_COMMAND, cmd); + + scsi_mem_addr = addr; + + scsi_chip_init(); + scsi_bus_reset(); +} + + +/************************************************************************************ + * Low level Part of SCSI Driver + */ + +/* + * big-endian -> little endian conversion for the script + */ +unsigned long swap_script(unsigned long val) +{ + unsigned long tmp; + tmp = ((val>>24)&0xff) | ((val>>8)&0xff00) | ((val<<8)&0xff0000) | ((val<<24)&0xff000000); + return tmp; +} + + +void scsi_write_byte(ulong offset,unsigned char val) +{ + out8(scsi_mem_addr+offset,val); +} + + +unsigned char scsi_read_byte(ulong offset) +{ + return(in8(scsi_mem_addr+offset)); +} + + +/******************************************************************************** + * interrupt handler + */ +void handle_scsi_int(void) +{ + unsigned char stat,stat1,stat2; + unsigned short sstat; + int i; +#ifdef SCSI_SINGLE_STEP + unsigned long tt; +#endif + stat=scsi_read_byte(ISTAT); + if((stat & DIP)==DIP) { /* DMA Interrupt pending */ + stat1=scsi_read_byte(DSTAT); +#ifdef SCSI_SINGLE_STEP + if((stat1 & SSI)==SSI) + { + tt=in32r(scsi_mem_addr+DSP); + if(((tt)>=start_script_select) && ((tt)>2); + goto end_single; + } + if(((tt)>=start_script_msgout) && ((tt)>2); + goto end_single; + } + if(((tt)>=start_script_msgin) && ((tt)>2); + goto end_single; + } + if(((tt)>=start_script_msg_ext) && ((tt)>2); + goto end_single; + } + if(((tt)>=start_script_cmd) && ((tt)>2); + goto end_single; + } + if(((tt)>=start_script_data_in) && ((tt)>2); + goto end_single; + } + if(((tt)>=start_script_data_out) && ((tt)>2); + goto end_single; + } + if(((tt)>=start_script_status) && ((tt)>2); + goto end_single; + } + if(((tt)>=start_script_complete) && ((tt)>2); + goto end_single; + } + if(((tt)>=start_script_error) && ((tt)>2); + goto end_single; + } + if(((tt)>=start_script_reselection) && ((tt)>2); + goto end_single; + } + printf("sc: %lx\n",tt); +end_single: + stat2=scsi_read_byte(DCNTL); + stat2|=STD; + scsi_write_byte(DCNTL,stat2); + } +#endif + if((stat1 & SIR)==SIR) /* script interrupt */ + { + int_stat[0]=in32(scsi_mem_addr+DSPS); + } + if((stat1 & DFE)==0) { /* fifo not epmty */ + scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */ + stat2=scsi_read_byte(STEST3); + scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */ + } + } + if((stat & SIP)==SIP) { /* scsi interrupt */ + sstat = (unsigned short)scsi_read_byte(SIST+1); + sstat <<=8; + sstat |= (unsigned short)scsi_read_byte(SIST); + for(i=0;i<3;i++) { + if(int_stat[i]==0) + break; /* found an empty int status */ + } + int_stat[i]=SCSI_INT_STATE | sstat; + stat1=scsi_read_byte(DSTAT); + if((stat1 & DFE)==0) { /* fifo not epmty */ + scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */ + stat2=scsi_read_byte(STEST3); + scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */ + } + } + if((stat & INTF)==INTF) { /* interrupt on Fly */ + scsi_write_byte(ISTAT,stat); /* clear it */ + for(i=0;i<3;i++) { + if(int_stat[i]==0) + break; /* found an empty int status */ + } + int_stat[i]=INT_ON_FY; + } +} + +void scsi_bus_reset(void) +{ + unsigned char t; + int i; + int end = CFG_SCSI_SPIN_UP_TIME*1000; + + t=scsi_read_byte(SCNTL1); + scsi_write_byte(SCNTL1,(t | CRST)); + udelay(50); + scsi_write_byte(SCNTL1,t); + + puts("waiting for devices to spin up"); + for(i=0;i>8)); + scsi_write_byte(DIEN,script_int_mask); +} + +void scsi_write_dsp(unsigned long start) +{ + unsigned long val; +#ifdef SCSI_SINGLE_STEP + unsigned char t; +#endif + val = start; + out32r(scsi_mem_addr + DSP,start); +#ifdef SCSI_SINGLE_STEP + t=scsi_read_byte(DCNTL); + t|=STD; + scsi_write_byte(DCNTL,t); +#endif +} + +/* only used for debug purposes */ +void scsi_print_script(void) +{ + printf("script_select @ 0x%08lX\n",(unsigned long)&script_select[0]); + printf("script_msgout @ 0x%08lX\n",(unsigned long)&script_msgout[0]); + printf("script_msgin @ 0x%08lX\n",(unsigned long)&script_msgin[0]); + printf("script_msgext @ 0x%08lX\n",(unsigned long)&script_msg_ext[0]); + printf("script_cmd @ 0x%08lX\n",(unsigned long)&script_cmd[0]); + printf("script_data_in @ 0x%08lX\n",(unsigned long)&script_data_in[0]); + printf("script_data_out @ 0x%08lX\n",(unsigned long)&script_data_out[0]); + printf("script_status @ 0x%08lX\n",(unsigned long)&script_status[0]); + printf("script_complete @ 0x%08lX\n",(unsigned long)&script_complete[0]); + printf("script_error @ 0x%08lX\n",(unsigned long)&script_error[0]); +} + + + +void scsi_set_script(ccb *pccb) +{ + int busdevfunc = pccb->priv; + int i; + i=0; + script_select[i++]=swap_script(SCR_REG_REG(GPREG, SCR_AND, 0xfe)); + script_select[i++]=0; /* LED ON */ + script_select[i++]=swap_script(SCR_CLR(SCR_TRG)); /* select initiator mode */ + script_select[i++]=0; + /* script_select[i++]=swap_script(SCR_SEL_ABS_ATN | pccb->target << 16); */ + script_select[i++]=swap_script(SCR_SEL_ABS | pccb->target << 16); + script_select[i++]=swap_script(phys_to_bus(&script_cmd[4])); /* error handling */ + script_select[i++]=swap_script(SCR_JUMP); /* next section */ + /* script_select[i++]=swap_script((unsigned long)&script_msgout[0]); */ /* message out */ + script_select[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* command out */ + +#ifdef SCSI_SINGLE_STEP + start_script_select=(unsigned long)&script_select[0]; + len_script_select=i*4; +#endif + + i=0; + script_msgout[i++]=swap_script(SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT))); + script_msgout[i++]=SIR_SEL_ATN_NO_MSG_OUT; + script_msgout[i++]=swap_script( SCR_MOVE_ABS(1) ^ SCR_MSG_OUT); + script_msgout[i++]=swap_script(phys_to_bus(&pccb->msgout[0])); + script_msgout[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_COMMAND))); /* if Command phase */ + script_msgout[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* switch to command */ + script_msgout[i++]=swap_script(SCR_INT); /* interrupt if not */ + script_msgout[i++]=SIR_MSG_OUT_NO_CMD; + +#ifdef SCSI_SINGLE_STEP + start_script_msgout=(unsigned long)&script_msgout[0]; + len_script_msgout=i*4; +#endif + i=0; + script_cmd[i++]=swap_script(SCR_MOVE_ABS(pccb->cmdlen) ^ SCR_COMMAND); + script_cmd[i++]=swap_script(phys_to_bus(&pccb->cmd[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); /* message in ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT))); /* data out ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_data_out[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN))); /* data in ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_data_in[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_STATUS))); /* status ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_status[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND))); /* command ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_cmd[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT))); /* message out ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_msgout[0])); + script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_IN))); /* just for error handling message in ? */ + script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0])); + script_cmd[i++]=swap_script(SCR_INT); /* interrupt if not */ + script_cmd[i++]=SIR_CMD_OUT_ILL_PH; +#ifdef SCSI_SINGLE_STEP + start_script_cmd=(unsigned long)&script_cmd[0]; + len_script_cmd=i*4; +#endif + i=0; + script_data_out[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_OUT); /* move */ + script_data_out[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */ + script_data_out[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS))); + script_data_out[i++]=swap_script(phys_to_bus(&script_status[0])); + script_data_out[i++]=swap_script(SCR_INT); + script_data_out[i++]=SIR_DATA_OUT_ERR; + +#ifdef SCSI_SINGLE_STEP + start_script_data_out=(unsigned long)&script_data_out[0]; + len_script_data_out=i*4; +#endif + i=0; + script_data_in[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_IN); /* move */ + script_data_in[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */ + script_data_in[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS))); + script_data_in[i++]=swap_script(phys_to_bus(&script_status[0])); + script_data_in[i++]=swap_script(SCR_INT); + script_data_in[i++]=SIR_DATA_IN_ERR; +#ifdef SCSI_SINGLE_STEP + start_script_data_in=(unsigned long)&script_data_in[0]; + len_script_data_in=i*4; +#endif + i=0; + script_msgin[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); + script_msgin[i++]=swap_script(phys_to_bus(&pccb->msgin[0])); + script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE))); + script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); + script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT))); + script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); + script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP))); + script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); + script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP))); + script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); + script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED))); + script_msgin[i++]=swap_script(phys_to_bus(&script_msg_ext[0])); + script_msgin[i++]=swap_script(SCR_INT); + script_msgin[i++]=SIR_MSG_RECEIVED; +#ifdef SCSI_SINGLE_STEP + start_script_msgin=(unsigned long)&script_msgin[0]; + len_script_msgin=i*4; +#endif + i=0; + script_msg_ext[i++]=swap_script(SCR_CLR (SCR_ACK)); /* clear ACK */ + script_msg_ext[i++]=0; + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* assuming this is the msg length */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[1])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[2])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[3])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[4])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[5])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[6])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ + script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[7])); + script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); + script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ + script_msg_ext[i++]=swap_script(SCR_INT); + script_msg_ext[i++]=SIR_MSG_OVER7; +#ifdef SCSI_SINGLE_STEP + start_script_msg_ext=(unsigned long)&script_msg_ext[0]; + len_script_msg_ext=i*4; +#endif + i=0; + script_status[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_STATUS); + script_status[i++]=swap_script(phys_to_bus(&pccb->status)); + script_status[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); + script_status[i++]=swap_script(phys_to_bus(&script_msgin[0])); + script_status[i++]=swap_script(SCR_INT); + script_status[i++]=SIR_STATUS_ILL_PH; +#ifdef SCSI_SINGLE_STEP + start_script_status=(unsigned long)&script_status[0]; + len_script_status=i*4; +#endif + i=0; + script_complete[i++]=swap_script(SCR_REG_REG (SCNTL2, SCR_AND, 0x7f)); + script_complete[i++]=0; + script_complete[i++]=swap_script(SCR_CLR (SCR_ACK|SCR_ATN)); + script_complete[i++]=0; + script_complete[i++]=swap_script(SCR_WAIT_DISC); + script_complete[i++]=0; + script_complete[i++]=swap_script(SCR_REG_REG(GPREG, SCR_OR, 0x01)); + script_complete[i++]=0; /* LED OFF */ + script_complete[i++]=swap_script(SCR_INT); + script_complete[i++]=SIR_COMPLETE; +#ifdef SCSI_SINGLE_STEP + start_script_complete=(unsigned long)&script_complete[0]; + len_script_complete=i*4; +#endif + i=0; + script_error[i++]=swap_script(SCR_INT); /* interrupt if error */ + script_error[i++]=SIR_SCRIPT_ERROR; +#ifdef SCSI_SINGLE_STEP + start_script_error=(unsigned long)&script_error[0]; + len_script_error=i*4; +#endif + i=0; + script_reselection[i++]=swap_script(SCR_CLR (SCR_TRG)); /* target status */ + script_reselection[i++]=0; + script_reselection[i++]=swap_script(SCR_WAIT_RESEL); + script_reselection[i++]=swap_script(phys_to_bus(&script_select[0])); /* len = 4 */ +#ifdef SCSI_SINGLE_STEP + start_script_reselection=(unsigned long)&script_reselection[0]; + len_script_reselection=i*4; +#endif +} + + + +void scsi_issue(ccb *pccb) +{ + int busdevfunc = pccb->priv; + int i; + unsigned short sstat; + int retrycnt; /* retry counter */ + for(i=0;i<3;i++) + int_stat[i]=0; /* delete all int status */ + /* struct pccb must be set-up correctly */ + retrycnt=0; + PRINTF("ID %d issue cmd %02X\n",pccb->target,pccb->cmd[0]); + pccb->trans_bytes=0; /* no bytes transfered yet */ + scsi_set_script(pccb); /* fill in SCRIPT */ + scsi_int_mask=STO | UDC | MA; /* | CMP; / * Interrupts which are enabled */ + script_int_mask=0xff; /* enable all Ints */ + scsi_int_enable(); + scsi_write_dsp(phys_to_bus(&script_select[0])); /* start script */ + /* now we have to wait for IRQs */ +retry: + /* + * This version of the driver is _not_ interrupt driven, + * but polls the chip's interrupt registers (ISTAT, DSTAT). + */ + while(int_stat[0]==0) + handle_scsi_int(); + + if(int_stat[0]==SIR_COMPLETE) { + if(pccb->msgin[0]==M_DISCONNECT) { + PRINTF("Wait for reselection\n"); + for(i=0;i<3;i++) + int_stat[i]=0; /* delete all int status */ + scsi_write_dsp(phys_to_bus(&script_reselection[0])); /* start reselection script */ + goto retry; + } + pccb->contr_stat=SIR_COMPLETE; + return; + } + if((int_stat[0] & SCSI_INT_STATE)==SCSI_INT_STATE) { /* scsi interrupt */ + sstat=(unsigned short)int_stat[0]; + if((sstat & STO)==STO) { /* selection timeout */ + pccb->contr_stat=SCSI_SEL_TIME_OUT; + scsi_write_byte(GPREG,0x01); + PRINTF("ID: %X Selection Timeout\n",pccb->target); + return; + } + if((sstat & UDC)==UDC) { /* unexpected disconnect */ + pccb->contr_stat=SCSI_UNEXP_DIS; + scsi_write_byte(GPREG,0x01); + PRINTF("ID: %X Unexpected Disconnect\n",pccb->target); + return; + } + if((sstat & RSL)==RSL) { /* reselection */ + pccb->contr_stat=SCSI_UNEXP_DIS; + scsi_write_byte(GPREG,0x01); + PRINTF("ID: %X Unexpected Disconnect\n",pccb->target); + return; + } + if(((sstat & MA)==MA)||((sstat & HTH)==HTH)) { /* phase missmatch */ + if(retrycnttrans_bytes=pccb->datalen - + ((unsigned long)scsi_read_byte(DBC) | + ((unsigned long)scsi_read_byte(DBC+1)<<8) | + ((unsigned long)scsi_read_byte(DBC+2)<<16)); + for(i=0;i<3;i++) + int_stat[i]=0; /* delete all int status */ + retrycnt++; + PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transfered %lx\n", + pccb->target,retrycnt,scsi_read_byte(SBCL),pccb->trans_bytes); + scsi_write_dsp(phys_to_bus(&script_cmd[4])); /* start retry script */ + goto retry; + } + if((sstat & MA)==MA) + pccb->contr_stat=SCSI_MA_TIME_OUT; + else + pccb->contr_stat=SCSI_HNS_TIME_OUT; + PRINTF("Phase Missmatch stat %lx\n",pccb->contr_stat); + return; + } /* no phase int */ +/* if((sstat & CMP)==CMP) { + pccb->contr_stat=SIR_COMPLETE; + return; + } +*/ + PRINTF("SCSI INT %lX\n",int_stat[0]); + pccb->contr_stat=int_stat[0]; + return; + } /* end scsi int */ + PRINTF("SCRIPT INT %lX phase %02X\n",int_stat[0],scsi_read_byte(SBCL)); + pccb->contr_stat=int_stat[0]; + return; +} + +int scsi_exec(ccb *pccb) +{ + unsigned char tmpcmd[16],tmpstat; + int i,retrycnt,t; + unsigned long transbytes,datalen; + unsigned char *tmpptr; + retrycnt=0; +retry: + scsi_issue(pccb); + if(pccb->contr_stat!=SIR_COMPLETE) + return FALSE; + if(pccb->status==S_GOOD) + return TRUE; + if(pccb->status==S_CHECK_COND) { /* check condition */ + for(i=0;i<16;i++) + tmpcmd[i]=pccb->cmd[i]; + pccb->cmd[0]=SCSI_REQ_SENSE; + pccb->cmd[1]=pccb->lun<<5; + pccb->cmd[2]=0; + pccb->cmd[3]=0; + pccb->cmd[4]=14; + pccb->cmd[5]=0; + pccb->cmdlen=6; + pccb->msgout[0]=SCSI_IDENTIFY; + transbytes=pccb->trans_bytes; + tmpptr=pccb->pdata; + pccb->pdata=&pccb->sense_buf[0]; + datalen=pccb->datalen; + pccb->datalen=14; + tmpstat=pccb->status; + scsi_issue(pccb); + for(i=0;i<16;i++) + pccb->cmd[i]=tmpcmd[i]; + pccb->trans_bytes=transbytes; + pccb->pdata=tmpptr; + pccb->datalen=datalen; + pccb->status=tmpstat; + PRINTF("Request_sense sense key %x ASC %x ASCQ %x\n",pccb->sense_buf[2]&0x0f, + pccb->sense_buf[12],pccb->sense_buf[13]); + switch(pccb->sense_buf[2]&0xf) { + case SENSE_NO_SENSE: + case SENSE_RECOVERED_ERROR: + /* seems to be ok */ + return TRUE; + break; + case SENSE_NOT_READY: + if((pccb->sense_buf[12]!=0x04)||(pccb->sense_buf[13]!=0x01)) { + /* if device is not in process of becoming ready */ + return FALSE; + break; + } /* else fall through */ + case SENSE_UNIT_ATTENTION: + if(retrycnttarget,retrycnt); + for(t=0;ttarget,retrycnt); + return FALSE; + default: + return FALSE; + } + } + PRINTF("Status = %X\n",pccb->status); + return FALSE; +} + + + + +void scsi_chip_init(void) +{ + /* first we issue a soft reset */ + scsi_write_byte(ISTAT,SRST); + udelay(1000); + scsi_write_byte(ISTAT,0); + /* setup chip */ + scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */ + scsi_write_byte(SCNTL1,0x00); + scsi_write_byte(SCNTL2,0x00); +#ifndef CFG_SCSI_SYM53C8XX_CCF /* config value for none 40 mhz clocks */ + scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */ +#else + scsi_write_byte(SCNTL3,CFG_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */ +#endif + scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */ + scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */ + scsi_write_byte(SDID,0x00); /* targed SCSI ID = 0 */ + scsi_int_mask=0x0000; /* no Interrupt is enabled */ + script_int_mask=0x00; + scsi_int_enable(); + scsi_write_byte(GPREG,0x01); /* GPIO0 is LED (off) */ + scsi_write_byte(GPCNTL,0x0E); /* GPIO0 is Output */ + scsi_write_byte(STIME0,0x08); /* handshake timer disabled, selection timeout 512msec */ + scsi_write_byte(RESPID,0x80); /* repond only to the own ID (reselection) */ + scsi_write_byte(STEST1,0x00); /* not isolated, SCLK is used */ + scsi_write_byte(STEST2,0x00); /* no Lowlevel Mode? */ + scsi_write_byte(STEST3,0x80); /* enable tolerANT */ + scsi_write_byte(CTEST3,0x04); /* clear FIFO */ + scsi_write_byte(CTEST4,0x00); + scsi_write_byte(CTEST5,0x00); +#ifdef SCSI_SINGLE_STEP +/* scsi_write_byte(DCNTL,IRQM | SSM); */ + scsi_write_byte(DCNTL,IRQD | SSM); + scsi_write_byte(DMODE,MAN); +#else +/* scsi_write_byte(DCNTL,IRQM); */ + scsi_write_byte(DCNTL,IRQD); + scsi_write_byte(DMODE,0x00); +#endif +} +#endif /* (CONFIG_COMMANDS & CFG_CMD_SCSI) */ + + +#endif /* CONFIG_SCSI_SYM53C8XX */ diff --git a/drivers/w83c553f.c b/drivers/w83c553f.c new file mode 100644 index 0000000000..5d82ed4dd4 --- /dev/null +++ b/drivers/w83c553f.c @@ -0,0 +1,226 @@ +/* + * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH + * Andreas Heppel + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Initialisation of the PCI-to-ISA bridge and disabling the BIOS + * write protection (for flash) in function 0 of the chip. + * Enabling function 1 (IDE controller of the chip. + */ + +#include +#include + +#ifdef CFG_WINBOND_83C553 + +#include +#include + +#include + +#define out8(addr,val) do { \ + out_8((u8*) (addr),(val)); udelay(1); \ + } while (0) +#define out16(addr,val) do { \ + out_be16((u16*) (addr),(val)); udelay(1); \ + } while (0) + +extern uint ide_bus_offset[CFG_IDE_MAXBUS]; + +void initialise_pic(void); +void initialise_dma(void); + +void initialise_w83c553f(void) +{ + pci_dev_t devbusfn; + unsigned char reg8; + unsigned short reg16; + unsigned int reg32; + + devbusfn = pci_find_device(W83C553F_VID, W83C553F_DID, 0); + if (devbusfn == -1) + { + printf("Error: Cannot find W83C553F controller on any PCI bus."); + return; + } + + pci_read_config_word(devbusfn, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + pci_write_config_word(devbusfn, PCI_COMMAND, reg16); + + pci_read_config_byte(devbusfn, WINBOND_IPADCR, ®8); + /* 16 MB ISA memory space */ + reg8 |= (IPADCR_IPATOM4 | IPADCR_IPATOM5 | IPADCR_IPATOM6 | IPADCR_IPATOM7); + reg8 &= ~IPADCR_MBE512; + pci_write_config_byte(devbusfn, WINBOND_IPADCR, reg8); + + pci_read_config_byte(devbusfn, WINBOND_CSCR, ®8); + /* switch off BIOS write protection */ + reg8 |= CSCR_UBIOSCSE; + reg8 &= ~CSCR_BIOSWP; + pci_write_config_byte(devbusfn, WINBOND_CSCR, reg8); + + /* + * Interrupt routing: + * - IDE -> IRQ 9/0 + * - INTA -> IRQ 10 + * - INTB -> IRQ 11 + * - INTC -> IRQ 14 + * - INTD -> IRQ 15 + */ + pci_write_config_byte(devbusfn, WINBOND_IDEIRCR, 0x90); + pci_write_config_word(devbusfn, WINBOND_PCIIRCR, 0xABEF); + + /* + * Read IDE bus offsets from function 1 device. + * We must unmask the LSB indicating that ist is an IO address. + */ + devbusfn |= PCI_BDF(0,0,1); + + /* + * Switch off legacy IRQ for IDE and IDE port 1. + */ + pci_write_config_byte(devbusfn, 0x09, 0x8F); + + pci_read_config_dword(devbusfn, WINDOND_IDECSR, ®32); + reg32 &= ~(IDECSR_LEGIRQ | IDECSR_P1EN | IDECSR_P1F16); + pci_write_config_dword(devbusfn, WINDOND_IDECSR, reg32); + + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]); + ide_bus_offset[0] &= ~1; +#if CFG_IDE_MAXBUS > 1 + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]); + ide_bus_offset[1] &= ~1; +#endif + + /* + * Enable function 1, IDE -> busmastering and IO space access + */ + pci_read_config_word(devbusfn, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO; + pci_write_config_word(devbusfn, PCI_COMMAND, reg16); + + /* + * Initialise ISA interrupt controller + */ + initialise_pic(); + + /* + * Initialise DMA controller + */ + initialise_dma(); +} + +void initialise_pic(void) +{ + out8(W83C553F_PIC1_ICW1, 0x11); + out8(W83C553F_PIC1_ICW2, 0x08); + out8(W83C553F_PIC1_ICW3, 0x04); + out8(W83C553F_PIC1_ICW4, 0x01); + out8(W83C553F_PIC1_OCW1, 0xfb); + out8(W83C553F_PIC1_ELC, 0x20); + + out8(W83C553F_PIC2_ICW1, 0x11); + out8(W83C553F_PIC2_ICW2, 0x08); + out8(W83C553F_PIC2_ICW3, 0x02); + out8(W83C553F_PIC2_ICW4, 0x01); + out8(W83C553F_PIC2_OCW1, 0xff); + out8(W83C553F_PIC2_ELC, 0xce); + + out8(W83C553F_TMR1_CMOD, 0x74); + + out8(W83C553F_PIC2_OCW1, 0x20); + out8(W83C553F_PIC1_OCW1, 0x20); + + out8(W83C553F_PIC2_OCW1, 0x2b); + out8(W83C553F_PIC1_OCW1, 0x2b); +} + +void initialise_dma(void) +{ + unsigned int channel; + unsigned int rvalue1, rvalue2; + + /* perform a H/W reset of the devices */ + + out8(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00); + out16(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000); + + /* initialise all channels to a sane state */ + + for (channel = 0; channel < 4; channel++) { + /* + * dependent upon the channel, setup the specifics: + * + * demand + * address-increment + * autoinitialize-disable + * verify-transfer + */ + + switch (channel) { + case 0: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL); + break; + case 1: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); + break; + case 2: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); + break; + case 3: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); + break; + default: + rvalue1 = 0x00; + rvalue2 = 0x00; + break; + } + + /* write to write mode registers */ + + out8(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF); + out16(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF); + } + + /* enable all channels */ + + out8(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00); + out16(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000); + /* + * initialize the global DMA configuration + * + * DACK# active low + * DREQ active high + * fixed priority + * channel group enable + */ + + out8(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00); + out16(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000); +} + +#endif /* CFG_WINBOND_83C553 */ -- cgit v1.2.3