From 7a49a16ec54e03ea6a383c1b97a78acc059c2df8 Mon Sep 17 00:00:00 2001 From: Ashok Reddy Soma Date: Fri, 23 Oct 2020 04:58:57 -0600 Subject: Revert "mmc: zynq: parse dt when probing" This reverts commit 942b5fc03218d1c94468fc658e7dec65dabcc830. This is partial revert of the above commit. mmc_of_parse() is reading no-1-8-v from device tree and if set, it is clearing the UHS speed capabilities of cfg->host_caps. cfg->host_caps &= ~(UHS_CAPS | MMC_MODE_HS200 | MMC_MODE_HS400 | MMC_MODE_HS400_ES); This is still missing to clear UHS speeds like SDHCI_SUPPORT_SDR104, SDHCI_SUPPORT_SDR50 and SDHCI_SUPPORT_DDR50. Even if we clear the flags SDHCI_SUPPORT_XXX in mmc_of_parse(), these speed flags are getting set again in cfg->host_caps in sdhci_setup_cfg(). The reason for this is, SDHCI_SUPPORT_XXX flags are cleared only if controller is not capable of supporting MMC_VDD_165_195 volts. if (caps & SDHCI_CAN_VDD_180) cfg->voltages |= MMC_VDD_165_195; if (!(cfg->voltages & MMC_VDD_165_195)) caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); It means "no-1-8-v", which is read from DT is not coming in to effect. So it is better we keep the host quirks(SDHCI_QUIRK_NO_1_8_V) to clear UHS speeds based on no-1-8-v from device tree. Hence revert the functionality related to no-1-8-v only, rest is fine in the patch. Signed-off-by: Ashok Reddy Soma Signed-off-by: Michal Simek Reviewed-by: Jaehoon Chung Reviewed-by: Peng Fan --- drivers/mmc/sdhci.c | 3 ++- drivers/mmc/zynq_sdhci.c | 5 +++++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index d549a264d73..06289343124 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -812,7 +812,8 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, cfg->host_caps &= ~MMC_MODE_HS_52MHz; } - if (!(cfg->voltages & MMC_VDD_165_195)) + if (!(cfg->voltages & MMC_VDD_165_195) || + (host->quirks & SDHCI_QUIRK_NO_1_8_V)) caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 775c17baac5..88e478ee11c 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -28,6 +28,7 @@ struct arasan_sdhci_priv { struct sdhci_host *host; u8 deviceid; u8 bank; + u8 no_1p8; }; #if defined(CONFIG_ARCH_ZYNQMP) @@ -236,6 +237,9 @@ static int arasan_sdhci_probe(struct udevice *dev) host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE; #endif + if (priv->no_1p8) + host->quirks |= SDHCI_QUIRK_NO_1_8_V; + plat->cfg.f_max = CONFIG_ZYNQ_SDHCI_MAX_FREQ; ret = mmc_of_parse(dev, &plat->cfg); @@ -277,6 +281,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev) priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1); priv->bank = dev_read_u32_default(dev, "xlnx,mio-bank", 0); + priv->no_1p8 = dev_read_bool(dev, "no-1-8-v"); return 0; } -- cgit v1.2.3