From 780f13a9e1a21098c6255aaa1c46ed80aa7a436c Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 1 Aug 2011 04:01:43 +0000 Subject: hwmon: do not init sensors on startup The U-Boot Design Principles[1] clearly say: Initialize devices only when they are needed within U-Boot, i.e. don't initialize the Ethernet interface(s) unless U-Boot performs a download over Ethernet; don't initialize any IDE or USB devices unless U-Boot actually tries to load files from these, etc. (and don't forget to shut down these devices after using them - otherwise nasty things may happen when you try to boot your OS). So, do not initialize and read the sensors on startup. Signed-off-by: Heiko Schocher cc: Wolfgang Denk cc: Holger Brunck --- drivers/hwmon/ds1621.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) (limited to 'drivers/hwmon/ds1621.c') diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 5a2ea62899..4e1db6dc0b 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -126,7 +126,7 @@ int dtt_write(int sensor, int reg, int val) } -static int _dtt_init(int sensor) +int dtt_init_one(int sensor) { int val; @@ -155,23 +155,6 @@ static int _dtt_init(int sensor) return 0; } - -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("DTT%d: FAILED\n", i + 1); - else - printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i])); - } - - return (0); -} - - int dtt_get_temp(int sensor) { int i; -- cgit v1.2.3