From 66d9dbec1cc27d6398ee6cf84639dbe14971251e Mon Sep 17 00:00:00 2001 From: mushtaq khan Date: Fri, 20 Apr 2007 14:23:02 +0530 Subject: Add driver for S-ATA-controller on Intel processors with South Bridge, ICH-5, ICH-6 and ICH-7. Implementation: 1. Code is divided in to two files. All functions, which are controller specific are kept in "drivers/ata_piix.c" file and functions, which are not controller specific, are kept in "common/cmd_sata.c" file. 2. Reading and Writing from the S-ATA drive is done using PIO method. 3. Driver can be configured for 48-bit addressing by defining macro CONFIG_LBA48, if this macro is not defined driver uses the 28-bit addressing. 4. S-ATA read function is hooked to the File system, commands like ext2ls and ext2load file can be used. This has been tested. 5. U-Boot command "SATA_init" is added, which initializes the S-ATA controller and identifies the S-ATA drives connected to it. 6. U-Boot command "sata" is added, which is used to read/write, print partition table and get info about the drives present. This I have implemented in same way as "ide" command is implemented in U-Boot. 7. This driver is for S-ATA in native mode. 8. This driver does not support the Native command queuing and Hot-plugging. Signed-off-by: Mushtaq Khan --- drivers/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/Makefile') diff --git a/drivers/Makefile b/drivers/Makefile index d68cba682b..8ad530fb2a 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)libdrivers.a -COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \ +COBJS = 3c589.o 5701rls.o ali512x.o ata_piix.o atmel_usart.o \ bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \ cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \ e1000.o eepro100.o \ -- cgit v1.2.3