From b93f81a418d0768d22a8c7cc8e8c5441e5439249 Mon Sep 17 00:00:00 2001 From: Jiang Yutang Date: Fri, 4 Mar 2011 10:25:54 +0800 Subject: powerpc/85xx: Add support usb2/etsec and tdm/audio pin multiplex on P1022DS For soc which have pin multiplex relation, some of them can't enable simultaneously. This patch add environment var 'hwconfig' content defination for them. you can enable some one function by setting environment var 'hwconfig' content and reset board. Detail setting please refer doc/README.p1022ds Signed-off-by: Jiang Yutang Signed-off-by: Kumar Gala --- doc/README.p1022ds | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 doc/README.p1022ds (limited to 'doc') diff --git a/doc/README.p1022ds b/doc/README.p1022ds new file mode 100644 index 0000000000..473ecf6217 --- /dev/null +++ b/doc/README.p1022ds @@ -0,0 +1,24 @@ +Overview +-------- +P1022ds is a Low End Dual core platform supporting the P1022 processor +of QorIQ series. P1022 is an e500 based dual core SOC. + + +Pin Multiplex(hwconfig setting) +------------------------------- +Add the environment 'usb2', 'audclk' and 'tdm' to support pin multiplex +via hwconfig, i.e: +'setenv hwconfig usb2' to enable USB2 and disable eTsec2 +'setenv hwconfig tdm' to enable TDM and disable Audio +'setenv hwconfig audclk:12' to enable Audio(codec clock sources is 12MHz) + and disable TDM +'setenv hwconfig 'usb2;tdm' to enable USB2 and TDM, disable eTsec2 and Audio +'setenv hwconfig 'usb2;audclk:11' to enable USB2 and Audio(codec clock sources + is 11MHz), disable eTsec2 and TDM + +Warning: TDM and AUDIO can not enable simultaneous ! +and AUDIO codec clock sources only setting as 11MHz or 12MHz ! +'setenv hwconfig 'audclk:12;tdm' --- error ! +'setenv hwconfig 'audclk:11;tdm' --- error ! +'setenv hwconfig 'audclk:10' --- error ! + -- cgit v1.2.3